summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
AgeCommit message (Collapse)Author
2020-12-04mt76: mt7915: remove unused mt7915_mcu_bss_sync_tlv()Ryder Lee
mt7915_mcu_bss_sync_tlv() is no longer used, so remove it. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add support to set tx frequency offset in testmodeShayne Chen
Support to set tx frequency offset in testmode, which is usally used in the pre-calibration stage. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: implement testmode tx supportShayne Chen
Support testmode tx for MT7915A, including tx streams and HE rate settings. Reviewed-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: query station rx rate from firmwareFelix Fietkau
When per-packet rate reporting is enabled, the hardware can get stuck under some conditions. It self-recovers quickly, but in practice this leads to reduced performance. In order to avoid running into this issue, disable per-packet rate reporting by default and query the rx rate from firmware instead, unless monitor mode is enabled. Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: support 32 station interfacesFelix Fietkau
When looking for a MAC address slot, start by using main BSSID slots 1-3, afterwards use 16 repeater mode BSSID slots, then start using the slots usually used for AP mode. This search order should prevent unnecessary conflicts with AP mode interfaces on the same PHY Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add encap offload for 4-address mode stationsFelix Fietkau
Enable MWDS mode in firmware as well and fix txp->rept_wds_wcid for wcid >= 255 Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-12-04mt76: mt7915: add 802.11 encap offload supportFelix Fietkau
It is currently limited to 3-address mode AP and STA interfaces Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: add Tx A-MSDU offloading supportRyder Lee
This disables the software A-MSDU aggregation in mac80211 and enables hardware offloading Suggested-by: Yiwei Chung <yiwei.chung@mediatek.com> Suggested-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Co-developed-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-09-24mt76: mt7915: enable U-APSD on AP sideRyder Lee
Enable U-APSD support for AP interface. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-07-21mt76: mt7915: add MU-MIMO supportRyder Lee
Enable MU-MIMO DL/UL and add relative counters in debugfs. Currently MU modules read WTBL first to notify BA changes to other cross modules, so adjust mt7915_mcu_sta_ba() accordingly. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-28mt76: mt7915: add spatial reuse supportRyder Lee
Enable or disable OBSS PD when the bss config changes or we assoc to an AP that broadcasts the IE. With this patch, we can get ~20% gain in OBSS OTA environment. Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: allocate proper size for tlv tagsRyder Lee
Allocating proper memory size according to tlv usage. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add Tx beamformee supportRyder Lee
Enable beamformee support. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add Tx beamformer supportRyder Lee
Enable TxBF modules and trigger sounding process to support Tx beamformer. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: enable firmware module debug supportRyder Lee
This allows host driver to get useful information of some important modules. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: set peer Tx fixed rate through debugfsRyder Lee
Driver can manually set fixed rate for each peer through debugfs. May use .set_bitrate_mask callback and iterate stations under the current vif to achieve the aim once it supports HE rate. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add HE capabilities support for peersRyder Lee
Set peer's bsic HE capabilities through starec. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Suggested-by: Shihwei Lin <shihwei.lin@mediatek.com> Tested-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Chih-Min Chen <chih-min.chen@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: add HE bss_conf support for interfacesRyder Lee
Add basic HE BSS's info for interfaces. As for the advanced features will be added gradually in the future patches. (i.e. BSS color, TWT, spatial reuse and OFDMA) Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Shayne Chen <shayne.chen@mediatek.com> Tested-by: Chih-Min Chen <chih-min.chen@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: register per-phy HE capabilities for each interfaceRyder Lee
The capabilities for the HE interfaces are generated from the capabilities reported by the firmware. This should move to common file once we got other HE devices support. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: mt7915: implement HE per-rate tx power supportRyder Lee
Use firmware support for applying per-rate limit and power offsets. This can support all HE RU types. Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Tested-by: Chih-Min Chen <chih-min.chen@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
2020-05-12mt76: add mac80211 driver for MT7915 PCIe-based chipsetsRyder Lee
Add support for the MediaTek latest generation IEEE 802.11ax 4x4 device MT7915E, which supports concurrent dual-band operation at both 5GHz and 2.4GHz. Note that this patch just add basic part and will add more HE capabilities support in the further patches. The driver supports AP, Station, Mesh and monitor mode. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Shayne Chen <shayne.chen@mediatek.com> Signed-off-by: Chih-Min Chen <chih-min.chen@mediatek.com> Suggested-by: Shihwei Lin <shihwei.lin@mediatek.com> Tested-by: Evelyn Tsai <evelyn.tsai@mediatek.com> Acked-by: Yiwei Chung <yiwei.chung@mediatek.com> Acked-by: YF Luo <yf.luo@mediatek.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-25 06:55:54 +0000