summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/iwlwifi/iwl-commands.h
AgeCommit message (Collapse)Author
2010-10-07iwlagn: add temperature offset calib for 6000g2Shanyu Zhao
6000g2 devices need to have temperature offset calibration. The runtime uCode needs to receive the calibration results just like BB and LO calibration. To do this, driver reads the offset value from NVM and send it to uCode after runtime uCode is alive. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-07iwlagn: fix default calibration table sizeShanyu Zhao
iwlagn driver uses the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as the chain noise reset calibration index and IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE+1 as the chain noise gain calibration index, if not specified by the TLV value in the new firmware format. However, this is broken if we need to add more calibrations like the temperature offset calibration because we increased IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE by 1. To fix this issue, define IWL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE and use it as the calibration index instead. We still keep the IWL_MAX_STANDARD_PHY_CALIBRATE_TBL_SIZE as a sanity check for the TLV value given by ucode. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: rename iwl5000_tx_respWey-Yi Guy
iwl5000_tx_resp really should be iwlagn_tx_resp, rename it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlwifi: remove uncorrect commentsWey-Yi Guy
some structure belong to _agn devices, not just 5000. Fix it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-10-06iwlagn: rename iwl5000_tx_power_dbm_cmdWey-Yi Guy
iwl5000_tx_power_dbm_cmd really should be iwlagn_tx_power_dbm_cmd, so rename it. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-28iwlwifi: send DC calib config to runtime ucodeShanyu Zhao
Since uCode is responsible for doing DC calibration, there's no need to let init uCode to do initial DC calibration then send results back to driver, then driver sends the results to runtime uCode. Driver can simply tell runtime uCode to do DC calibration. Actually, this patch does not disable DC calib for init uCode. It just prevent driver from saving and sending the DC calib results (from init ucode) to runtime uCode. The driver still uses 0xffffffff in CALIB_CFG_CMD for init ucode. Signed-off-by: Shanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: minor coex API changesWey-Yi Guy
Adding two new parameters in config bt API. these two parameters use the 3 reserved bytes, so there is no structure size changes. Make sure set both parameters to "zero" in order to preserve previous behavior. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: correct naming for failure reply tx statusWey-Yi Guy
For failure tx status 0x90 and 0x91, give the correct name to reflect the errors. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-09-17iwlagn: log aggregation tx command statusWey-Yi Guy
For aggregated frames with block ack, different status flag will be used as part of tx command response. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: add PAN APIJohannes Berg
Define the new host commands and notifications REPLY_WIPAN_PARAMS REPLY_WIPAN_RXON REPLY_WIPAN_RXON_TIMING REPLY_WIPAN_RXON_ASSOC REPLY_WIPAN_QOS_PARAM REPLY_WIPAN_WEPKEY REPLY_WIPAN_P2P_CHANNEL_SWITCH REPLY_WIPAN_NOA_NOTIFICATION and their corresponding structures along with the PAN station flag, the PAN AP sta ID and new dev types for the second context. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-27iwlwifi: make hw crypto context awareJohannes Berg
HW crypto needs to be aware of the context, and there are different command IDs for the WEP keys per context, so move the key tracking variables and command IDs into the context structure. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-25iwlagn: update bt status upon scan completeWey-Yi Guy
Update bt status upon receive scan complete notification Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25iwlagn: generic bt coex functionsWey-Yi Guy
Move bt coex functions to iwl-agn-lib.c, so those functions can be shared by multiple wifi/bt combo devices Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25iwlagn: add additional bt related parametersWey-Yi Guy
Add additional bt coex related parameters and initialize at init time. Thoese parameters will be used in later implementations. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25iwlagn: parsing uart message and take actionsWey-Yi Guy
1. Based on uart message from uCode, re-configure BT kill ack mask messages from uCode 2. send REPLY_BT_COEX_SCO command to uCode based on the uart frame received from uCode Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25iwlagn: add bt prio_boost to .cfgWey-Yi Guy
Use .cfg to configure the default bt priority boost value; the default bt priority boost is 0xf0 Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25iwlagn: wifi/bt coex configuration sequenceWey-Yi Guy
bt config command need to send before the init calibration command, driver need to let uCode know that calibrations are being performed now in order to assure antenna is not being taken to BT use during radio/dsp reads/writes Also, bt_coex_priorty_table command need to be send right after the bt_config_command during init sequence. Followed by bt coex envelope command to initialize and prepare uCode bt state machine Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25iwlwifi: add BT notification support for bt coexJohannes Berg
When advanced bt coex enabled, uCode will send bt status notification to driver, here add support for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25iwlagn: implement advance BT config commandJohannes Berg
6000g2b hardware implements advance bluetooth coexist command, implement base on the new API command strucutre. Also increment the API 5 to support the advance BT/WIfi coex. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25iwlwifi: add 6000g2b BT coexist APIJohannes Berg
The new 6000g2b hardware requires a different bluetooth coexist implementation on the host, this adds the command/notification definitions for it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-25iwlwifi: comments cleanupWey-Yi Guy
No code or function changes, just some cleanup work for out-of-date comments Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-24iwlwifi: more generic name for rssi calc in iwlagnWey-Yi Guy
Change the define to more generic naming to match _agn devices since the rssi calculation are common function for 5000 series and up Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: additional parameter in REPLY_RX_PHY_CMDWey-Yi Guy
Adding additional parameter in REPLY_RX_PHY_CMD, frame_time indicate the frame's time on the air based on byte count and frame rate calculation Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: make aggregation time limit configurableWey-Yi Guy
By default, aggregation time limit is 4000 uSec, add the parameter to .cfg to allow this parameter can be configure per device base if needed. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-24iwlwifi: max/min aggregation time limitWey-Yi Guy
Set the minimum and maximum for aggregation time limit in uSec. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-08-16iwlwifi: track IBSS manager statusJohannes Berg
Only the IBSS manager, ie. the station that sent the IBSS beacon last, should be replying to probe responses. This requires implementing the mac80211 tx_last_beacon callback, which we can do thanks to the ucode beacon notification. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-commands.h
2010-07-26iwlagn: use __packed on new structure definitionsJohn W. Linville
"iwlagn: add statistic notification structure for WiFi/BT devices" added several new '__attribute__ ((packed))' lines. Change them to the generic __packed. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-23iwlwifi: remove spurious semicolonsJohannes Berg
defines shouldn't be terminated with a semicolon, the code using them should supply it. Luckily these are not used in a context where it matters. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlwifi: add TLV to specify the size of phy calibration tableWey-Yi Guy
Different devices have different size of phy calibration table; add new TLV to specify the size. If the TLV is not part of uCode header, the default table size will be used to make sure the backward compatibilities. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: Add support for bluetooth statistics notificationWey-Yi Guy
WiFi/BT combo devices has different statistics notification structure, adding the support here to make sure the structure align correctly. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-23iwlagn: add statistic notification structure for WiFi/BT devicesWey-Yi Guy
If its WiFi/BT combo device, the statistics notification sent by uCode will include the additional BT related statistics counters. Adding new data structure to support the new layout. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-17iwlwifi: additional statistic debug counterWey-Yi Guy
Add wait_for_silence_timeout_cnt to statistics_dbg structure Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-14iwlwifi: convert new uses of __attribute__ ((packed)) to __packedJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-13Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-07-02iwlwifi: adding enhance sensitivity table entriesWey-Yi Guy
For newer devices (6000g2a and 6000g2b), the sensitivity table send to uCode require additional table entries to help sensitivity calibration. All the additional entries has fix data for now, but do expect the value will be change in the future when device become more stable. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
2010-07-02iwlwifi: generic parameter define for _agn deviceWey-Yi Guy
Code clean up to change name from having 5000 as part of name which easy to confuse and think it is for 5000 series devices to more generic _agn name since it is being used by multiple _agn devices. No functional changes. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-07-02iwlwifi: add mac80211 flush callback supportWey-Yi Guy
Adding flush callback support in the driver. Two type of flush can be issued by mac80211: 1. drop = true: frame drop is ok, issue REPLY_TXFIFO_FLUSH host command to uCode to drop all the frames in tx fifo queues; then return the control back to mac80211 2. drop = false: wait for either all the frames in tx fifo queues been transmitted, or timeout; then return the control back to mac80211 If the flush request coming from mac80211, mac80211 will make sure there are no additional frames push down to driver before flush operation is completed. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-07-02iwlwifi: tx fifo queue flush commandWey-Yi Guy
Add host command and structure for tx fifo queue flush Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-07-01Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/libertas/host.h
2010-06-25iwlwifi: name change from signal protection flagWey-Yi Guy
This bit need to be set for both RTS/CTS or CTS-to-self protection, if CTS-to-self is used, then uCode will check the RXON_FLG_SELF_CTS_EN status. Change the name from TX_CMD_FLG_RTS_CTS_MSK to TX_CMD_FLAG_PROT_REQUIRE_MSK to match the behavior of the bit setting. Also update comments to reflect which hardware uses which of the TX command flags. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-17Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2010-06-14iwlwifi: rename iwl4965_rx_mpdu_res_startEmmanuel Grumbach
iwl4965_rx_mpdu_res_start is not 4695 specific, so rename it to more general name iwl_rx_mpdu_res_start. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-11Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/wl12xx/wl1271.h drivers/net/wireless/wl12xx/wl1271_cmd.h
2010-06-05iwlwifi: remove inaccurate commentWey-Yi Guy
REPLY_REMOVE_STA command is used Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-06-03drivers/net: use __packed annotationEric Dumazet
cleanup patch. Use new __packed annotation in drivers/net/ Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-13iwlwifi: remove IWL_MULTICAST_IDJohannes Berg
This constant is not used, and incorrect, since the broadcast ID must be used for multicast too. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlwifi: "tx power per chain" are part of ucode_tx_statsWey-Yi Guy
Move "tx power per chain" into ucode_tx_stats, it is debugging information provided by uCode as part of statistics notification. The "tx power per chain" parameters are optional parameters which only supported by 6000 series device today; those are reserved fields for all the other devices. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-05-10iwlagn: implement loading a new firmware file typeJohannes Berg
The old firmware file type does not allow indicating any firmware capabilities, which we frequently want to make things easier. This implements a new firmware type that is based on a TLV structure, and adds a TLV for the maximum length of probe requests in scans. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
2010-04-30Merge branch 'wireless-2.6' into wireless-next-2.6Reinette Chatre
Patch "iwlwifi: work around passive scan issue" was merged into wireless-2.6, but touched a lot of code since modified (and moved) in wireless-next-2.6. This caused some conflicts. Conflicts: drivers/net/wireless/iwlwifi/iwl-scan.c Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-31 23:32:16 +0000