summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless/ath/regd.c
AgeCommit message (Collapse)Author
2020-11-07ath: regd: Provide description for ath_reg_apply_ir_flags's 'reg' paramLee Jones
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ath/regd.c:378: warning: Function parameter or member 'reg' not described in 'ath_reg_apply_ir_flags' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-20-lee.jones@linaro.org
2019-12-02ath: add support for special 0x0 regulatory domainWen Gong
Some sdio chips of rome QCA6174's regulatory domain code of EEPROM is empty, then ath_is_world_regd will return false for this case, and it will lead function __ath_reg_dyn_country not work, thus the regdomain will not update for NL80211_REGDOM_SET_BY_COUNTRY_IE type, it result ath10k set the same regdomain/reg_5ghz_ctl/reg_2ghz_ctl to firmware, then the tx power will not changed with different regdomain's AP. The regulatory domain code of EEPROM of some QCA6174 PCIE chip is 0x6c, it means world wide regdomain, for this chip, it does not have the issue. For empty reulatory domain code chip, set it to world regulatory domain in functio ath_regd_sanitize, then it will fix the issue. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-10-14ath: rename regulatory rulesTomislav Požega
Regulatory rule defines in regd.c are used not only by ath9k but also ath10k driver (haven't test other drivers) and thus should be renamed from ATH9K* to ATH*. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2017-04-19ath: Fix updating radar flags for coutry code IndiaMohammed Shafi Shajakhan
As per latest regulatory update for India, channel 52, 56, 60, 64 is no longer restricted to DFS. Enabling DFS/no infra flags in driver results in applying all DFS related restrictions (like doing CAC etc before this channel moves to 'available state') for these channels even though the country code is programmed as 'India' in he hardware, fix this by relaxing the frequency range while applying RADAR flags only if the country code is programmed to India. If the frequency range needs to modified based on different country code, ath_is_radar_freq can be extended/modified dynamically. Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-10-04ath: export alpha2 helperMichal Kazior
This will be helpful for drivers that can acquire alpha2 regulatory codes. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-08-04tree-wide: replace config_enabled() with IS_ENABLED()Masahiro Yamada
The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-23ath: use CTL region from cfg80211 if unset in EEPROMFelix Fietkau
Many AP devices do not have the proper regulatory domain programmed in EEPROM. Instead they expect the software to set the appropriate region. For these devices, the country code defaults to US, and the driver uses the US CTL tables as well. On devices bought in Europe this can lead to tx power being set too high on the band edges, even if the cfg80211 regdomain is set correctly. Fix this issue by taking into account the DFS region, but only when the EEPROM regdomain is set to default. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-02-14ath: remove camel case from struct reg_dmn_pair_mappingKalle Valo
Fixes a checkpatch warning in ath10k: drivers/net/wireless/ath/ath10k/mac.c:1636: WARNING: Avoid CamelCase: <regpair->regDmnEnum> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2014-01-13cfg80211: make regulatory_hint() remove REGULATORY_CUSTOM_REGLuis R. Rodriguez
The REGULATORY_CUSTOM_REG can be used during early init with the goal of overriding the wiphy's default regulatory settings in case the alpha2 of the device is not known. In the case that the alpha2 becomes known lets avoid having drivers having to clear the REGULATORY_CUSTOM_REG flag by doing it for them when regulatory_hint() is used. Cc: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-01-13ath: fix warning on usage of REGULATORY_CUSTOM_REGLuis R. Rodriguez
ath wants to first apply the custom regd and only later will it revert to not using it if an alpha2 regulatory domain is found. Since the wireless core now enforces usage of the REGULATORY_CUSTOM_REG strictly when wiphy_apply_custom_regulatory() is used this makes ath adhere to the expected behaviour but also updates the wiphy after its done with the custom usage. This fixes this warning: [ 5.488733] ath: phy0: ASPM enabled: 0x43 [ 5.488735] ath: EEPROM regdomain: 0x0 [ 5.488736] ath: EEPROM indicates default country code should be used [ 5.488736] ath: doing EEPROM country->regdmn map search [ 5.488737] ath: country maps to regdmn code: 0x3a [ 5.488737] ath: Country alpha2 being used: US [ 5.488738] ath: Regpair used: 0x3a [ 5.488738] ------------[ cut here ]------------ [ 5.488745] WARNING: CPU: 0 PID: 161 at /home/sujith/dev/wireless-testing/net/wireless/reg.c:1361 wiphy_apply_custom_regulatory+0x17a/0x1b0 [cfg80211]() [ 5.488746] wiphy should have REGULATORY_CUSTOM_REG The wireless core can *later* lift this flag for us for when using the regulatory_hint() to make this fix more generic. Reported-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: fix dynamic user regulatory domain supportLuis R. Rodriguez
As it stands dynamic user regulatory domain support is only possible for a few programmed regulatory domains as a few countries do not allow for this. The existing code however only would take advantage of the feature if a custom world regulatory domain is used though as that's when we clear beconing flags. We need to lift this restriction as otherwise this feature is pointless. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: dynamic user allow check helper to the topLuis R. Rodriguez
This will be used later. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: move dynamic_country_user_possible() to the topLuis R. Rodriguez
This will be used later. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: fix usage of freq_reg_info()Luis R. Rodriguez
freq_reg_info() expects KHz and not MHz, fix this. In this case we'll now be getting the no-ir flags cleared on channels for any channel when the country IE trusts that channel. @@ struct ieee80211_channel *ch; struct wiphy *wiphy; const struct ieee80211_reg_rule *rule; @@ -rule = freq_reg_info(wiphy, ch->center_freq); +rule = freq_reg_info(wiphy, MHZ_TO_KHZ(ch->center_freq)); Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Reported-by: Mihir Shete <smihir@qti.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: move the channel for ath_reg_apply_beaconing_flags() into helperLuis R. Rodriguez
While at it convert this into a switch statement, this makes it easier and manage. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: simplify ath_reg_apply_beaconing_flags()Luis R. Rodriguez
Simplify ath_reg_apply_beaconing_flags() by making use of thew new no-ir helper. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: rename ath_reg_apply_active_scan_flags() to ath_reg_apply_ir_flags()Luis R. Rodriguez
This also applies the no-ibss flag to the channels or clears it. The idea here is to clarify no initiated radiation should be allowed on these channels. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: clean up ath_reg_apply_active_scan_flags()Luis R. Rodriguez
The routine ath_reg_apply_active_scan_flags() can be a bit hard to read, this cleans it up by adding helpers for the two cases of clearing IR flags or adding them. This approach also makes no assumptions on the index of channels 12 and 13 so it should be portable accross different drivers. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: fix logic on ath_reg_apply_active_scan_flags()Luis R. Rodriguez
The existing logic removes the passive scan flag from channels 12 and 13 when a regulatory hint coming from something other than a country IE has been passed. This is incorrect, the original intention was to ensure we always have passive scan enabled for these two channels for a specific set of custom world regulatory domains. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-02Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2013-11-25cfg80211: add flags to define country IE processing rulesLuis R. Rodriguez
802.11 cards may have different country IE parsing behavioural preferences and vendors may want to support these. These preferences were managed by the REGULATORY_CUSTOM_REG and the REGULATORY_STRICT_REG flags and their combination. Instead of using this existing notation, split out the country IE behavioural preferences as a new flag. This will allow us to add more customizations easily and make the code more maintainable. Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up conflicts] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: move regulatory flags to their own variableLuis R. Rodriguez
We'll expand this later, this will make it easier to classify and review what things are related to regulatory or not. Coccinelle only missed 4 hits, which I had to do manually, supplying the SmPL in case of merge conflicts. @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_CUSTOM_REGULATORY +e->regulatory_flags |= REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY +wiphy->regulatory_flags & REGULATORY_CUSTOM_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags |= REGULATORY_STRICT_REG @@ expression e; @@ -e->flags |= WIPHY_FLAG_STRICT_REGULATORY +e->regulatory_flags |= REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags &= ~REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY +wiphy->regulatory_flags & REGULATORY_STRICT_REG @@ struct wiphy *wiphy; @@ -wiphy->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ expression e; @@ -e->flags |= WIPHY_FLAG_DISABLE_BEACON_HINTS +e->regulatory_flags |= REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags &= ~WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags &= ~REGULATORY_DISABLE_BEACON_HINTS @@ struct wiphy *wiphy; @@ -wiphy->flags & WIPHY_FLAG_DISABLE_BEACON_HINTS +wiphy->regulatory_flags & REGULATORY_DISABLE_BEACON_HINTS Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Cc: Mihir Shete <smihir@qti.qualcomm.com> Cc: Henri Bahini <hbahini@qca.qualcomm.com> Cc: Tushnim Bhattacharyya <tushnimb@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [fix up whitespace damage, overly long lines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-25cfg80211: consolidate passive-scan and no-ibss flagsLuis R. Rodriguez
These two flags are used for the same purpose, just combine them into a no-ir flag to annotate no initiating radiation is allowed. Old userspace sending either flag will have it treated as the no-ir flag. To be considerate to older userspace we also send both the no-ir flag and the old no-ibss flags. Newer userspace will have to be aware of older kernels. Update all places in the tree using these flags with the following semantic patch: @@ @@ -NL80211_RRF_PASSIVE_SCAN +NL80211_RRF_NO_IR @@ @@ -NL80211_RRF_NO_IBSS +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_PASSIVE_SCAN +IEEE80211_CHAN_NO_IR @@ @@ -IEEE80211_CHAN_NO_IBSS +IEEE80211_CHAN_NO_IR @@ @@ -NL80211_RRF_NO_IR | NL80211_RRF_NO_IR +NL80211_RRF_NO_IR @@ @@ -IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_IR +IEEE80211_CHAN_NO_IR @@ @@ -(NL80211_RRF_NO_IR) +NL80211_RRF_NO_IR @@ @@ -(IEEE80211_CHAN_NO_IR) +IEEE80211_CHAN_NO_IR Along with some hand-optimisations in documentation, to remove duplicates and to fix some indentation. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [do all the driver updates in one go] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-11-15ath: fix dynamic user regulatory settingsLuis R. Rodriguez
A world regulatory domain check was in place that prevents user dynamic regulatory hints from being processed. This was there for historical reasons as this was only possible previously for world roaming cards and dynamic regulatory settings was only possible for country IEs. Fix this by enforcing the world regulatory domain check only for when the initiator is a country IE. Support for dynamic user regulatory support is already checked. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath: add support for proper dynamic regulatory hintsLuis R. Rodriguez
This enables support for dynamic user regulatory hints. This is enabled only when CFG80211_CERTIFICATION_ONUS is selected. For US and JP this is explicitly disabled unless the systems are being used for strict controlled testing. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath: split user and driver reguluatory hint parsingLuis R. Rodriguez
On the regulatory notifier split up the parsing of the hints coming from drivers or user. We'll treat these separately. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-10-18ath: move common dynamic regulatory domain setting to a helperLuis R. Rodriguez
This moves the dynamic regulatory domain selection code into a helper. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12ath: add VHT80 support for regulatory domainsLuis R. Rodriguez
This adds VHT80 support for the QCA world regulatory domains. Cc: kvalo@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-01-14wireless: make the reg_notifier() voidLuis R. Rodriguez
The reg_notifier()'s return value need not be checked as it is only supposed to do post regulatory work and that should never fail. Any behaviour to regulatory that needs to be considered before cfg80211 does work to a driver should be specified by using the already existing flags, the reg_notifier() just does post processing should it find it needs to. Also make lbs_reg_notifier static. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> [move lbs_reg_notifier to not break compile] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03regulatory: use IS_ERR macro family for freq_reg_infoJohannes Berg
Instead of returning an error and filling a pointer return the pointer and an ERR_PTR value in error cases. Acked-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03regulatory: remove handling of channel bandwidthJohannes Berg
The channel bandwidth handling isn't really quite right, it assumes that a 40 MHz channel is really two 20 MHz channels, which isn't strictly true. This is the way the regulatory database handling is defined right now though so remove the logic to handle other channel widths. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-04-10ath: Add and use pr_fmt, convert printks to pr_<level>Joe Perches
Use a more current logging style. Make sure all output is prefixed appropriately. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13ath: optimize processing of CTLs for country IEs for world roaming cardsLuis R. Rodriguez
When we receive a country IE hint and we have a world roaming card we can optimize output power further by ensuring that we use the calibrated data for the country by using that country's own CTL data. That is -- when world roaming and when we process a country IE we no longer need to use the lowest output power of all CTLs instead we use an optimized CTL output power for that specific country. We accomplish this by copying the regulatory data prior on init and restoring it when cfg80211 tells us it gets a core hint. Core hints are only sent on init and when it wants to restore reguulatory settings. We take advantage of this fact and apply the cached regulatory data when we get a core hint. When we get a country IE hint though we process the regulatory data as if programmed for a specific country. Tested-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-13ath: add a helper for processing reg data on initLuis R. Rodriguez
This has no functional change. The helper can be used later for other things like country IE changes and following the CTL for different countries. Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Acked-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux Conflicts: drivers/net/wireless/iwlegacy/iwl-debugfs.c drivers/net/wireless/iwlegacy/iwl-rx.c drivers/net/wireless/iwlegacy/iwl-scan.c drivers/net/wireless/iwlegacy/iwl-tx.c include/net/bluetooth/bluetooth.h
2011-11-08ath: Fix NULL ptr dereference in ath_reg_apply_world_flagsHelmut Schaa
This happens with devices using a regulatory domain 0x68 that are only 5Ghz capable because ath_reg_apply_active_scan_flags assumes that we always have a 2,4Ghz band. CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 82cd838c, ra == 82cd8384 Oops[#1]: Cpu 0 $ 0 : 00000000 00000061 00000003 00000024 $ 4 : 00000003 000016c1 82f900ac 00000024 $ 8 : 00000000 82cda304 0058bad8 00000005 $12 : 005908f8 001e8481 00000003 1dcd6500 $16 : 00000002 00000000 82c700c0 82c700c0 $20 : 82d415e4 82c70d64 82c70200 82c715bc $24 : 00000000 11e1a300 $28 : 82ce2000 82ce3c70 82c715a8 82cd8384 Hi : 00000000 Lo : 0000001e epc : 82cd838c ath_reg_apply_world_flags+0x78/0x17c [ath] Not tainted ra : 82cd8384 ath_reg_apply_world_flags+0x70/0x17c [ath] Status: 1000d403 KERNEL EXL IE Cause : 80800008 BadVA : 00000000 PrId : 00019374 (MIPS 24Kc) Modules linked in: ath9k(+) ath9k_common ath9k_hw ath mac80211 cfg80211 compat_firmware_class compat arc4 aes_generic deflate ecb cbc leds_gpio button_hotplug gpio_buttons input_polldev ie Process insmod (pid: 464, threadinfo=82ce2000, task=838b31d8, tls=00000000) Stack : 00000000 00000002 82f900ac 82c700c0 82d415e4 82c70d64 00000000 00000068 82f900ac 82cd88f4 82c700c0 82cda304 00000001 000020f0 82f90000 82c70d40 00000002 82f90000 82f900ac 82d4207c 82d518a0 00000002 7fee6118 8017c0d8 00000008 8397ba00 82c70d40 00000000 82c70200 83813000 83813058 b0010000 82d518a0 00000002 7fee6118 82d4b8c8 83445cc0 80120dc0 83804000 800eeda0 ... Call Trace: [<82cd838c>] ath_reg_apply_world_flags+0x78/0x17c [ath] [<82cd88f4>] ath_regd_init+0x464/0x488 [ath] [<82d4207c>] ath9k_init_device+0x6a4/0x6b4 [ath9k] [<82d4b8c8>] ath_pci_probe+0x27c/0x358 [ath9k] [<80181de0>] pci_device_probe+0x64/0xa4 [<8019e874>] driver_probe_device+0xb8/0x190 [<8019e9b8>] __driver_attach+0x6c/0xa4 [<8019dfc0>] bus_for_each_dev+0x60/0xb0 [<8019d744>] bus_add_driver+0xc4/0x25c [<8019ed6c>] driver_register+0xe0/0x198 [<8018206c>] __pci_register_driver+0x50/0xe0 [<82dd0010>] ath9k_init+0x10/0x54 [ath9k] [<8006b4a0>] do_one_initcall+0x68/0x1ec [<800a901c>] sys_init_module+0xec/0x23c [<80062544>] stack_done+0x20/0x3c Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-31drivers/net: Add export.h to files using EXPORT_SYMBOL/THIS_MODULEPaul Gortmaker
These were getting the macros from an implicit module.h include via device.h, but we are planning to clean that up. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> drivers/net: Add export.h to wireless/brcm80211/brcmfmac/bcmsdh.c This relatively recently added file uses EXPORT_SYMBOL and hence needs export.h included so that it is compatible with the module.h split up work. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-04-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/rt2x00/rt2x00queue.c drivers/net/wireless/rt2x00/rt2x00queue.h
2011-04-19ath: fix 0x6C for beaconing/passive scan flags based on country IELuis R. Rodriguez
The 0x6C regulatory domain is just like the 0x6A regulatory domain but differs in that 0x6C will allow adhoc and active scan on its channels only if we are associated to an AP with a country IE that allows those channels. The ath_reg_apply_beaconing_flags() does just this -- we respect the manufacturer's intent on only enabling beaconing modes of operation if and only if blessed by the country IE. Cc: David Quan <david.quan@atheros.com> Cc: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-14ath: Add a missing world regulatory domain 0x6CSenthil Balasubramanian
Some customers use 0x6C world regulatory domain and this patch adds the support. Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-01-28ath: Add function to check if 4.9GHz channels are allowedBruno Randolf
This adds a helper function to ath/regd.c which can be asked if 4.9GHz channels are allowed for a given regulatory domain code. This keeps the knowledge of regdomains and defines like MKK9_MKKC in one place. I'm passing the regdomain code instead of the ath_regulatory structure because this needs to be called quite early in the driver inititalization where ath_regulatory is not available yet in ath5k. I'm using MKK9_MKKC only because this is the regdomain in the 802.11j enabled sample cards we got from our vendor. I found some hints in HAL code that this is used by Atheros to indicate 4.9GHz channels support and that there might be other domain codes as well, but as I don't have any documentation I'm just putting in what I need right now. It can be extended later. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-16ath: fix NULL pointer dereference on reg_notifier()Luis R. Rodriguez
The reg_notifier() was recently updated as being capable of having the request passed as NULL, fix ath to follow this API change. Without this we end up oopsing: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] PGD b4c4c067 PUD b4c4d067 PMD 0 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/devices/pci0000:00/0000:00:1b.0/uevent CPU 1 Modules linked in: <etc> Pid: 436, comm: modprobe Not tainted 2.6.37-rc5-wl+ #36 6460DWU/6460DWU RIP: 0010:[<ffffffffa02fb8cb>] [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] RSP: 0018:ffff8800b6f6baa8 EFLAGS: 00010246 RAX: ffff8800b527b254 RBX: ffff8800b532c180 RCX: 0000000000000018 RDX: ffff8800b530c108 RSI: 0000000000000000 RDI: ffff8800b532c180 RBP: ffff8800b6f6baa8 R08: ffff8800b532f268 R09: 0000000000000235 R10: 00000000000016ad R11: 0000000000000018 R12: 0000000000000000 R13: 0000000000000016 R14: ffff8800b532f268 R15: 0000000000000011 FS: 00007f0c53104700(0000) GS:ffff8800bed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000004 CR3: 00000000b6531000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 436, threadinfo ffff8800b6f6a000, task ffff8800b404dc40) Stack: ffff8800b6f6bac8 ffffffffa03ea651 ffff8800b532c180 ffff8800b527b254 ffff8800b6f6bb38 ffffffffa01835ca ffffffffa019ed00 00000000a019ed80 0000000000000002 ffff880000000002 ffffffffa0366140 0000000010aee572 Call Trace: [<ffffffffa03ea651>] ath9k_reg_notifier+0x41/0x50 [ath9k] [<ffffffffa01835ca>] wiphy_update_regulatory+0x4ba/0x5a0 [cfg80211] [<ffffffffa0366140>] ? ieee80211_register_hw+0xa0/0x5b0 [mac80211] [<ffffffffa0366140>] ? ieee80211_register_hw+0xa0/0x5b0 [mac80211] [<ffffffffa017f994>] wiphy_register+0x1d4/0x360 [cfg80211] [<ffffffff8114b918>] ? __kmalloc+0x108/0x1c0 [<ffffffffa0366223>] ieee80211_register_hw+0x183/0x5b0 [mac80211] [<ffffffffa03eb49b>] ath9k_init_device+0x66b/0x850 [ath9k] [<ffffffffa03f9dd6>] ath_pci_probe+0x2f6/0x3c0 [ath9k] [<ffffffff81037529>] ? default_spin_lock_flags+0x9/0x10 [<ffffffff812e19cf>] local_pci_probe+0x5f/0xd0 [<ffffffff812e2bf1>] pci_device_probe+0x101/0x120 [<ffffffff81390aca>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff81390c26>] driver_probe_device+0x96/0x1c0 [<ffffffff81390deb>] __driver_attach+0x9b/0xa0 [<ffffffff81390d50>] ? __driver_attach+0x0/0xa0 [<ffffffff81390008>] bus_for_each_dev+0x68/0x90 [<ffffffff81390a4e>] driver_attach+0x1e/0x20 [<ffffffff81390309>] bus_add_driver+0xe9/0x290 [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffff81391130>] driver_register+0x80/0x150 [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffffa0407000>] ? ath9k_init+0x0/0x4d [ath9k] [<ffffffff812e2e76>] __pci_register_driver+0x56/0xd0 [<ffffffffa03f9ec3>] ath_pci_init+0x23/0x30 [ath9k] [<ffffffffa040702b>] ath9k_init+0x2b/0x4d [ath9k] [<ffffffff81002053>] do_one_initcall+0x43/0x190 [<ffffffff8109fb5b>] sys_init_module+0xbb/0x200 [<ffffffff8100c042>] system_call_fastpath+0x16/0x1b Code: <who even reads this anyway? haha, ok you do> RIP [<ffffffffa02fb8cb>] ath_reg_notifier_apply+0x5b/0xa0 [ath] RSP <ffff8800b6f6baa8> CR2: 0000000000000004 ---[ end trace 6d03d3c7eda9f06b ]--- Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-14drivers/net: Remove unnecessary returns from void function()sJoe Perches
This patch removes from drivers/net/ all the unnecessary return; statements that precede the last closing brace of void functions. It does not remove the returns that are immediately preceded by a label as gcc doesn't like that. It also does not remove null void functions with return. Done via: $ grep -rP --include=*.[ch] -l "return;\n}" net/ | \ xargs perl -i -e 'local $/ ; while (<>) { s/\n[ \t\n]+return;\n}/\n}/g; print; }' with some cleanups by hand. Compile tested x86 allmodconfig only. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-15Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: Documentation/feature-removal-schedule.txt drivers/net/wireless/ath/ath5k/phy.c drivers/net/wireless/wl12xx/wl1271_main.c
2010-04-06ath: fix code readability in regd.cLuis de Bethencourt
This is a patch to the ath/regd.c file that fixes two code readability issues. A space between to separate two defines and the indentation inside the ath_redg_is_eeprom_valid function. Signed-off-by: Luis de Bethencourt <luisbg@ubuntu.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-08ath: fix WARN_ON with Polish (Poland) Contry codeChristian Lamparter
This patch fixes a WARN_ON which is triggered by Poland's country code. ath: EEPROM regdomain: 0x8268 ath: EEPROM indicates we should expect a country code ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x37 ath: Country alpha2 being used: PL ath: Regpair used: 0x37 -----------[ cut here ]------------ WARNING: at drivers/net/wireless/ath/regd.c:155 ath_regd_init+0x30b Pid: 12661, comm: firmware/carl91 2.6.33-rc5-wl #18 Call Trace: [<>] ? warn_slowpath_common+0x76/0x8c [<>] ? ar9170_reg_notifier+0x0/0x2d [carl9170usb] [<>] ? ath_regd_init+0x30b/0x377 [ath] [<>] ? ar9170_register+0x3b3/0x3ca [carl9170usb] [...] ---[ end trace ]--- Note: Poland is just an example. But it is very likely that more country codes are affected. Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-19cfg80211: convert bools into flagsJohannes Berg
We've accumulated a number of options for wiphys which make more sense as flags as we keep adding more. Convert the existing ones. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-23 08:32:05 +0000