summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet
AgeCommit message (Collapse)Author
2020-12-17Merge tag 'net-5.11-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Current release - always broken: - net/smc: fix access to parent of an ib device - devlink: use _BITUL() macro instead of BIT() in the UAPI header - handful of mptcp fixes Previous release - regressions: - intel: AF_XDP: clear the status bits for the next_to_use descriptor - dpaa2-eth: fix the size of the mapped SGT buffer Previous release - always broken: - mptcp: fix security context on server socket - ethtool: fix string set id check - ethtool: fix error paths in ethnl_set_channels() - lan743x: fix rx_napi_poll/interrupt ping-pong - qca: ar9331: fix sleeping function called from invalid context bug" * tag 'net-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (32 commits) net/sched: sch_taprio: reset child qdiscs before freeing them nfp: move indirect block cleanup to flower app stop callback octeontx2-af: Fix undetected unmap PF error check net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments" qlcnic: Fix error code in probe mptcp: fix pending data accounting mptcp: push pending frames when subflow has free space mptcp: properly annotate nested lock mptcp: fix security context on server socket net/mlx5: Fix compilation warning for 32-bit platform mptcp: clear use_ack and use_map when dropping other suboptions devlink: use _BITUL() macro instead of BIT() in the UAPI header net: korina: fix return value net/smc: fix access to parent of an ib device ethtool: fix error paths in ethnl_set_channels() nfc: s3fwrn5: Remove unused NCI prop commands nfc: s3fwrn5: Remove the delay for NFC sleep phy: fix kdoc warning tipc: do sanity check payload of a netlink message use __netdev_notify_peers in hyperv ...
2020-12-17Merge tag 'powerpc-5.11-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Switch to the generic C VDSO, as well as some cleanups of our VDSO setup/handling code. - Support for KUAP (Kernel User Access Prevention) on systems using the hashed page table MMU, using memory protection keys. - Better handling of PowerVM SMT8 systems where all threads of a core do not share an L2, allowing the scheduler to make better scheduling decisions. - Further improvements to our machine check handling. - Show registers when unwinding interrupt frames during stack traces. - Improvements to our pseries (PowerVM) partition migration code. - Several series from Christophe refactoring and cleaning up various parts of the 32-bit code. - Other smaller features, fixes & cleanups. Thanks to: Alan Modra, Alexey Kardashevskiy, Andrew Donnellan, Aneesh Kumar K.V, Ard Biesheuvel, Athira Rajeev, Balamuruhan S, Bill Wendling, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Colin Ian King, Daniel Axtens, David Hildenbrand, Frederic Barrat, Ganesh Goudar, Gautham R. Shenoy, Geert Uytterhoeven, Giuseppe Sacco, Greg Kurz, Harish, Jan Kratochvil, Jordan Niethe, Kaixu Xia, Laurent Dufour, Leonardo Bras, Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Desnoyers, Nathan Lynch, Nicholas Piggin, Oleg Nesterov, Oliver O'Halloran, Oscar Salvador, Po-Hsu Lin, Qian Cai, Qinglang Miao, Randy Dunlap, Ravi Bangoria, Sachin Sant, Sandipan Das, Sebastian Andrzej Siewior , Segher Boessenkool, Srikar Dronamraju, Tyrel Datwyler, Uwe Kleine-König, Vincent Stehlé, Youling Tang, and Zhang Xiaoxu. * tag 'powerpc-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (304 commits) powerpc/32s: Fix cleanup_cpu_mmu_context() compile bug powerpc: Add config fragment for disabling -Werror powerpc/configs: Add ppc64le_allnoconfig target powerpc/powernv: Rate limit opal-elog read failure message powerpc/pseries/memhotplug: Quieten some DLPAR operations powerpc/ps3: use dma_mapping_error() powerpc: force inlining of csum_partial() to avoid multiple csum_partial() with GCC10 powerpc/perf: Fix Threshold Event Counter Multiplier width for P10 powerpc/mm: Fix hugetlb_free_pmd_range() and hugetlb_free_pud_range() KVM: PPC: Book3S HV: Fix mask size for emulated msgsndp KVM: PPC: fix comparison to bool warning KVM: PPC: Book3S: Assign boolean values to a bool variable powerpc: Inline setup_kup() powerpc/64s: Mark the kuap/kuep functions non __init KVM: PPC: Book3S HV: XIVE: Add a comment regarding VP numbering powerpc/xive: Improve error reporting of OPAL calls powerpc/xive: Simplify xive_do_source_eoi() powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_EOI_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_MASK_FW powerpc/xive: Remove P9 DD1 flag XIVE_IRQ_FLAG_SHIFT_BUG ...
2020-12-17nfp: move indirect block cleanup to flower app stop callbackSimon Horman
The indirect block cleanup may cause control messages to be sent if offloaded flows are present. However, by the time the flower app cleanup callback is called txbufs are no longer available and attempts to send control messages result in a NULL-pointer dereference in nfp_ctrl_tx_one(). This problem may be resolved by moving the indirect block cleanup to the stop callback, where txbufs are still available. As suggested by Jakub Kicinski and Louis Peens. Fixes: a1db217861f3 ("net: flow_offload: fix flow_indr_dev_unregister path") Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Louis Peens <louis.peens@netronome.com> Link: https://lore.kernel.org/r/20201216145701.30005-1-simon.horman@netronome.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17octeontx2-af: Fix undetected unmap PF error checkColin Ian King
Currently the check for an unmap PF error is always going to be false because intr_val is a 32 bit int and is being bit-mask checked against 1ULL << 32. Fix this by making intr_val a u64 to match the type at it is copied from, namely npa_event_context->npa_af_rvu_ge. Addresses-Coverity: ("Operands don't affect result") Fixes: f1168d1e207c ("octeontx2-af: Add devlink health reporters for NPA") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: George Cherian <george.cherian@marvell.com> Link: https://lore.kernel.org/r/20201216123604.15369-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17net: nixge: fix spelling mistake in Kconfig: "Instuments" -> "Instruments"Colin Ian King
There is a spelling mistake in the Kconfig. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201216120020.13149-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-17qlcnic: Fix error code in probeDan Carpenter
Return -EINVAL if we can't find the correct device. Currently it returns success. Fixes: 13159183ec7a ("qlcnic: 83xx base driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/X9nHbMqEyI/xPfGd@mwanda Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16net: korina: fix return valueVincent Stehlé
The ndo_start_xmit() method must not attempt to free the skb to transmit when returning NETDEV_TX_BUSY. Therefore, make sure the korina_send_packet() function returns NETDEV_TX_OK when it frees a packet. Fixes: ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC") Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201214220952.19935-1-vincent.stehle@laposte.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16use __netdev_notify_peers in ibmvnicLijun Pan
Start to use the lockless version of netdev_notify_peers. Signed-off-by: Lijun Pan <ljp@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16net: allwinner: Fix some resources leak in the error handling path of the ↵Christophe JAILLET
probe and in the remove function 'irq_of_parse_and_map()' should be balanced by a corresponding 'irq_dispose_mapping()' call. Otherwise, there is some resources leaks. Add such a call in the error handling path of the probe function and in the remove function. Fixes: 492205050d77 ("net: Add EMAC ethernet driver found on Allwinner A10 SoC's") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201214202117.146293-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16net: mscc: ocelot: Fix a resource leak in the error handling path of the ↵Christophe JAILLET
probe function In case of error after calling 'ocelot_init()', it must be undone by a corresponding 'ocelot_deinit()' call, as already done in the remove function. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201213114838.126922-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16net: bcmgenet: Fix a resource leak in an error handling path in the probe ↵Christophe JAILLET
functin If the 'register_netdev()' call fails, we must undo a previous 'bcmgenet_mii_init()' call. Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201212182005.120437-1-christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16dpaa2-eth: fix the size of the mapped SGT bufferIoana Ciornei
This patch fixes an error condition triggered when the code path which transmits a S/G frame descriptor when the skb's headroom is not enough for DPAA2's needs. We are greated with a splat like the one below when a SGT structure is recycled and that is because even though a dma_unmap is performed on the Tx confirmation path, the unmap is not done with the proper size. [ 714.464927] WARNING: CPU: 13 PID: 0 at drivers/iommu/io-pgtable-arm.c:281 __arm_lpae_map+0x2d4/0x30c (...) [ 714.465343] Call trace: [ 714.465348] __arm_lpae_map+0x2d4/0x30c [ 714.465353] __arm_lpae_map+0x114/0x30c [ 714.465357] __arm_lpae_map+0x114/0x30c [ 714.465362] __arm_lpae_map+0x114/0x30c [ 714.465366] arm_lpae_map+0xf4/0x180 [ 714.465373] arm_smmu_map+0x4c/0xc0 [ 714.465379] __iommu_map+0x100/0x2bc [ 714.465385] iommu_map_atomic+0x20/0x30 [ 714.465391] __iommu_dma_map+0xb0/0x110 [ 714.465397] iommu_dma_map_page+0xb8/0x120 [ 714.465404] dma_map_page_attrs+0x1a8/0x210 [ 714.465413] __dpaa2_eth_tx+0x384/0xbd0 [fsl_dpaa2_eth] [ 714.465421] dpaa2_eth_tx+0x84/0x134 [fsl_dpaa2_eth] [ 714.465427] dev_hard_start_xmit+0x10c/0x2b0 [ 714.465433] sch_direct_xmit+0x1a0/0x550 (...) The dpaa2-eth driver uses an area of software annotations to transmit necessary information from the Tx path to the Tx confirmation one. This SWA structure has a different layout for each kind of frame that we are dealing with: linear, S/G or XDP. The commit referenced was incorrectly setting up the 'sgt_size' field for the S/G type of SWA even though we are dealing with a linear skb here. Fixes: d70446ee1f40 ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing") Reported-by: Daniel Thompson <daniel.thompson@linaro.org> Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20201211171607.108034-1-ciorneiioana@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'selinux-pr-20201214' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: "While we have a small number of SELinux patches for v5.11, there are a few changes worth highlighting: - Change the LSM network hooks to pass flowi_common structs instead of the parent flowi struct as the LSMs do not currently need the full flowi struct and they do not have enough information to use it safely (missing information on the address family). This patch was discussed both with Herbert Xu (representing team netdev) and James Morris (representing team LSMs-other-than-SELinux). - Fix how we handle errors in inode_doinit_with_dentry() so that we attempt to properly label the inode on following lookups instead of continuing to treat it as unlabeled. - Tweak the kernel logic around allowx, auditallowx, and dontauditx SELinux policy statements such that the auditx/dontauditx are effective even without the allowx statement. Everything passes our test suite" * tag 'selinux-pr-20201214' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: lsm,selinux: pass flowi_common instead of flowi to the LSM hooks selinux: Fix fall-through warnings for Clang selinux: drop super_block backpointer from superblock_security_struct selinux: fix inode_doinit_with_dentry() LABEL_INVALID error handling selinux: allow dontauditx and auditallowx rules to take effect without allowx selinux: fix error initialization in inode_doinit_with_dentry()
2020-12-16i40e, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16ice, xsk: clear the status bits for the next_to_use descriptorBjörn Töpel
On the Rx side, the next_to_use index points to the next item in the HW ring to be refilled/allocated, and next_to_clean points to the next item to potentially be processed. When the HW Rx ring is fully refilled, i.e. no packets has been processed, the next_to_use will be next_to_clean - 1. When the ring is fully processed next_to_clean will be equal to next_to_use. The latter case is where a bug is triggered. If the next_to_use bits are not cleared, and the "fully processed" state is entered, a stale descriptor can be processed. The skb-path correctly clear the status bit for the next_to_use descriptor, but the AF_XDP zero-copy path did not do that. This change adds the status bits clearing of the next_to_use descriptor. Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16lan743x: fix rx_napi_poll/interrupt ping-pongSven Van Asbroeck
Even if there is more rx data waiting on the chip, the rx napi poll fn will never run more than once - it will always read a few buffers, then bail out and re-arm interrupts. Which results in ping-pong between napi and interrupt. This defeats the purpose of napi, and is bad for performance. Fix by making the rx napi poll behave identically to other ethernet drivers: 1. initialize rx napi polling with an arbitrary budget (64). 2. in the polling fn, return full weight if rx queue is not depleted, this tells the napi core to "keep polling". 3. update the rx tail ("ring the doorbell") once for every 8 processed rx ring buffers. Thanks to Jakub Kicinski, Eric Dumazet and Andrew Lunn for their expert opinions and suggestions. Tested with 20 seconds of full bandwidth receive (iperf3): rx irqs softirqs(NET_RX) ----------------------------- before 23827 33620 after 129 4081 Tested-by: Sven Van Asbroeck <thesven73@gmail.com> # lan7430 Fixes: 23f0703c125be ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Link: https://lore.kernel.org/r/20201215161954.5950-1-TheSven73@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-16Merge tag 'asm-generic-timers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform
2020-12-15Merge tag 'net-next-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - support "prefer busy polling" NAPI operation mode, where we defer softirq for some time expecting applications to periodically busy poll - AF_XDP: improve efficiency by more batching and hindering the adjacency cache prefetcher - af_packet: make packet_fanout.arr size configurable up to 64K - tcp: optimize TCP zero copy receive in presence of partial or unaligned reads making zero copy a performance win for much smaller messages - XDP: add bulk APIs for returning / freeing frames - sched: support fragmenting IP packets as they come out of conntrack - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs BPF: - BPF switch from crude rlimit-based to memcg-based memory accounting - BPF type format information for kernel modules and related tracing enhancements - BPF implement task local storage for BPF LSM - allow the FENTRY/FEXIT/RAW_TP tracing programs to use bpf_sk_storage Protocols: - mptcp: improve multiple xmit streams support, memory accounting and many smaller improvements - TLS: support CHACHA20-POLY1305 cipher - seg6: add support for SRv6 End.DT4/DT6 behavior - sctp: Implement RFC 6951: UDP Encapsulation of SCTP - ppp_generic: add ability to bridge channels directly - bridge: Connectivity Fault Management (CFM) support as is defined in IEEE 802.1Q section 12.14. Drivers: - mlx5: make use of the new auxiliary bus to organize the driver internals - mlx5: more accurate port TX timestamping support - mlxsw: - improve the efficiency of offloaded next hop updates by using the new nexthop object API - support blackhole nexthops - support IEEE 802.1ad (Q-in-Q) bridging - rtw88: major bluetooth co-existance improvements - iwlwifi: support new 6 GHz frequency band - ath11k: Fast Initial Link Setup (FILS) - mt7915: dual band concurrent (DBDC) support - net: ipa: add basic support for IPA v4.5 Refactor: - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej Siewior - phy: add support for shared interrupts; get rid of multiple driver APIs and have the drivers write a full IRQ handler, slight growth of driver code should be compensated by the simpler API which also allows shared IRQs - add common code for handling netdev per-cpu counters - move TX packet re-allocation from Ethernet switch tag drivers to a central place - improve efficiency and rename nla_strlcpy - number of W=1 warning cleanups as we now catch those in a patchwork build bot Old code removal: - wan: delete the DLCI / SDLA drivers - wimax: move to staging - wifi: remove old WDS wifi bridging support" * tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits) net: hns3: fix expression that is currently always true net: fix proc_fs init handling in af_packet and tls nfc: pn533: convert comma to semicolon af_vsock: Assign the vsock transport considering the vsock address flags af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path vsock_addr: Check for supported flag values vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag vm_sockets: Add flags field in the vsock address data structure net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context nfc: s3fwrn5: Release the nfc firmware net: vxget: clean up sparse warnings mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3 mlxsw: spectrum_router_xm: Introduce basic XM cache flushing mlxsw: reg: Add Router LPM Cache Enable Register mlxsw: reg: Add Router LPM Cache ML Delete Register mlxsw: spectrum_router_xm: Implement L-value tracking for M-index mlxsw: reg: Add XM Router M Table Register ...
2020-12-14net: hns3: fix expression that is currently always trueColin Ian King
The || condition in hdev->fd_active_type != HCLGE_FD_ARFS_ACTIVE || hdev->fd_active_type != HCLGE_FD_RULE_NONE will always be true because hdev->fd_active_type cannot be equal to two different values at the same time. The expression is always true which is not correct. Fix this by replacing || with && to correct the logic in the expression. Addresses-Coverity: ("Constant expression result") Fixes: 0205ec041ec6 ("net: hns3: add support for hw tc offload of tc flower") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Huazhong Tan <tanhuazhong@huawei.com> Link: https://lore.kernel.org/r/20201215000033.85383-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process ↵Vladimir Oltean
context Currently ocelot_set_rx_mode calls ocelot_mact_learn directly, which has a very nice ocelot_mact_wait_for_completion at the end. Introduced in commit 639c1b2625af ("net: mscc: ocelot: Register poll timeout should be wall time not attempts"), this function uses readx_poll_timeout which triggers a lot of lockdep warnings and is also dangerous to use from atomic context, potentially leading to lockups and panics. Steen Hegelund added a poll timeout of 100 ms for checking the MAC table, a duration which is clearly absurd to poll in atomic context. So we need to defer the MAC table access to process context, which we do via a dynamically allocated workqueue which contains all there is to know about the MAC table operation it has to do. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201212191612.222019-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14net: vxget: clean up sparse warningsJakub Kicinski
This code is copying strings in 64 bit quantities, the device returns them in big endian. As long as we store in big endian IOW endian on both sides matches, we're good, so swap to_be64, not from be64. This fixes ~60 sparse warnings. Link: https://lore.kernel.org/r/20201212234426.177015-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 routerJiri Pirko
In case the eXtended mezzanine is present on the system, use it for IPv4 router offload. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3Jiri Pirko
Set a profile option to instruct FW to use 1/2 of KVH for XLT cache, not the whole one. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum_router_xm: Introduce basic XM cache flushingJiri Pirko
Upon route insertion and removal, it is needed to flush possibly cached entries from the XM cache. Extend XM op context to carry information needed for the flush. Implement the flush in delayed work since for HW design reasons there is a need to wait 50usec before the flush can be done. If during this time comes the same flush request, consolidate it to the first one. Implement this queued flushes by a hashtable. v2: * Fix GENMASK() high bit Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add Router LPM Cache Enable RegisterJiri Pirko
The RLPMCE allows disabling the LPM cache. Can be changed on the fly. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add Router LPM Cache ML Delete RegisterJiri Pirko
The RLCMLD register is used to bulk delete the XLT-LPM cache ML entries. This can be used by SW when L is increased or decreased, thus need to remove entries with old ML values. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum_router_xm: Implement L-value tracking for M-indexJiri Pirko
There is a table that assigns L-value per M-index. The L is always the biggest from the currently inserted prefixes. Setup a hashtable to track the M-index information and the prefixes that are related to it. Ensure the L-value is always correctly set. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add XM Router M Table RegisterJiri Pirko
The XRMT configures the M-Table for the XLT-LPM. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum_router: Introduce per-ASIC XM initializationJiri Pirko
During the router init flow, call into XM code and initialize couple of items needed for XM functionality: 1) Query the capabilities and sizes. Check the XM device id. 2) Initialize the M-value. Note that currently the M-value is set fixed to 16 for IPv4. In future this may change to better cover the actual inserted routes. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add XM Lookup Table Query RegisterJiri Pirko
The XLTQ is used to query HW for XM-related info. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add Router XLT M select RegisterJiri Pirko
The RXLTM configures and selects the M for the XM lookups. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: Ignore ports that are connected to eXtended mezanineJiri Pirko
Use the info stored in the bus_info struct about the eXtended mezanine connected ports and don't expose them. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: pci: Obtain info about ports used by eXtended mezanineJiri Pirko
The output of boardinfo command was extended to contain information about XM. Indicates if is present and in case it is, tells which localports are used for the connection. So parse this info and store it in bus_info passed up to the driver. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: spectrum_router: Introduce XM implementation of router low-level opsJiri Pirko
In order to offload entries to XM, implement a set of low-level functions to work with LPM trees in XM and also to pack and write FIB entries into XM. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add Router XLT Enable RegisterJiri Pirko
The RXLTE enables XLT (eXtended Lookup Table) LPM lookups if a capable XM is present on the system. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14mlxsw: reg: Add XM Direct RegisterJiri Pirko
The XMDR allows direct access to the XM device via the switch. Signed-off-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Enable batch mode when using HWRM_NVM_MODIFY to flash packages.Michael Chan
The current scheme allocates a DMA buffer as big as the requested firmware package file and DMAs the contents to firmware in one operation. The buffer size can be several hundred kilo bytes and the driver may not be able to allocate the memory. This will cause firmware upgrade to fail. Improve the scheme by using smaller DMA blocks and calling firmware to DMA each block in a batch mode. Older firmware can cause excessive NVRAM erases if the block size is too small so we try to allocate a 256K buffer to begin with and size it down successively if we cannot allocate the memory. Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Retry installing FW package under NO_SPACE error condition.Pavan Chebbi
In bnxt_flash_package_from_fw_obj(), if firmware returns the NO_SPACE error, call __bnxt_flash_nvram() to create the UPDATE directory and then loop back and retry one more time. Since the first try may fail, we use the silent version to send the firmware commands. Reviewed-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Restructure bnxt_flash_package_from_fw_obj() to execute in a loop.Pavan Chebbi
On NICs with a smaller NVRAM, FW installation may fail after multiple updates due to fragmentation. The driver can retry when FW returns a special error code. To faciliate the retry, we restructure the logic that performs the flashing in a loop. The actual retry logic will be added in the next patch. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Rearrange the logic in bnxt_flash_package_from_fw_obj().Michael Chan
This function will be modified in the next patch to retry flashing the firmware in a loop. To facilate that, we rearrange the code so that the steps that only need to be done once before the loop will be moved to the top of the function. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14bnxt_en: Refactor bnxt_flash_nvram.Pavan Chebbi
Refactor bnxt_flash_nvram() into __bnxt_flash_nvram() that takes an additional dir_item_len parameter. The new function will be used in subsequent patches with the dir_item_len parameter set to create the UPDATE directory during flashing. Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14Merge tag 'sched-core-2020-12-14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler updates from Thomas Gleixner: - migrate_disable/enable() support which originates from the RT tree and is now a prerequisite for the new preemptible kmap_local() API which aims to replace kmap_atomic(). - A fair amount of topology and NUMA related improvements - Improvements for the frequency invariant calculations - Enhanced robustness for the global CPU priority tracking and decision making - The usual small fixes and enhancements all over the place * tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (61 commits) sched/fair: Trivial correction of the newidle_balance() comment sched/fair: Clear SMT siblings after determining the core is not idle sched: Fix kernel-doc markup x86: Print ratio freq_max/freq_base used in frequency invariance calculations x86, sched: Use midpoint of max_boost and max_P for frequency invariance on AMD EPYC x86, sched: Calculate frequency invariance for AMD systems irq_work: Optimize irq_work_single() smp: Cleanup smp_call_function*() irq_work: Cleanup sched: Limit the amount of NUMA imbalance that can exist at fork time sched/numa: Allow a floating imbalance between NUMA nodes sched: Avoid unnecessary calculation of load imbalance at clone time sched/numa: Rename nr_running and break out the magic number sched: Make migrate_disable/enable() independent of RT sched/topology: Condition EAS enablement on FIE support arm64: Rebuild sched domains on invariance status changes sched/topology,schedutil: Wrap sched domains rebuild sched/uclamp: Allow to reset a task uclamp constraint value sched/core: Fix typos in comments Documentation: scheduler: fix information on arch SD flags, sched_domain and sched_debug ...
2020-12-14ice, xsk: Move Rx allocation out of while-loopBjörn Töpel
Instead doing the check for allocation in each loop, move it outside the while loop and do it every NAPI loop. This change boosts the xdpsock rxdrop scenario with 15% more packets-per-second. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/r/20201211085410.59350-1-bjorn.topel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14net: mtk_eth: simplify the mediatek code return expressionZheng Yongjun
Simplify the return expression at mtk_eth_path.c file, simplify this all. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211083801.1632-1-zhengyongjun3@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14octeontx2-af: Add devlink health reporters for NPAGeorge Cherian
Add health reporters for RVU NPA block. NPA Health reporters handle following HW event groups - GENERAL events - ERROR events - RAS events - RVU event Output: #devlink health pci/0002:01:00.0: reporter hw_npa_intr state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_gen state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_err state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true reporter hw_npa_ras state healthy error 0 recover 0 grace_period 0 auto_recover true auto_dump true #devlink health dump show pci/0002:01:00.0 reporter hw_npa_err NPA_AF_ERR: NPA Error Interrupt Reg : 4096 AQ Doorbell Error #devlink health dump show pci/0002:01:00.0 reporter hw_npa_ras NPA_AF_RVU_RAS: NPA RAS Interrupt Reg : 0 Each reporter dump shows the Register value and the description of the cause. Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14octeontx2-af: Add devlink suppoort to af driverGeorge Cherian
Add devlink support to AF driver. Basic devlink support is added. Currently info_get is the only supported devlink ops. devlink ouptput looks like this # devlink dev pci/0002:01:00.0 # devlink dev info pci/0002:01:00.0: driver octeontx2-af # Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by: Jerin Jacob <jerinj@marvell.com> Signed-off-by: George Cherian <george.cherian@marvell.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-14Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add speed testing on 1420-byte blocks for networking Algorithms: - Improve performance of chacha on ARM for network packets - Improve performance of aegis128 on ARM for network packets Drivers: - Add support for Keem Bay OCS AES/SM4 - Add support for QAT 4xxx devices - Enable crypto-engine retry mechanism in caam - Enable support for crypto engine on sdm845 in qce - Add HiSilicon PRNG driver support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits) crypto: qat - add capability detection logic in qat_4xxx crypto: qat - add AES-XTS support for QAT GEN4 devices crypto: qat - add AES-CTR support for QAT GEN4 devices crypto: atmel-i2c - select CONFIG_BITREVERSE crypto: hisilicon/trng - replace atomic_add_return() crypto: keembay - Add support for Keem Bay OCS AES/SM4 dt-bindings: Add Keem Bay OCS AES bindings crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd crypto: seed - remove trailing semicolon in macro definition crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg crypto: cpt - Fix sparse warnings in cptpf hwrng: ks-sa - Add dependency on IOMEM and OF crypto: lib/blake2s - Move selftest prototype into header file crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata crypto: ecdh - avoid unaligned accesses in ecdh_set_secret() crypto: ccree - rework cache parameters handling crypto: cavium - Use dma_set_mask_and_coherent to simplify code crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code ...
2020-12-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
xdp_return_frame_bulk() needs to pass a xdp_buff to __xdp_return(). strlcpy got converted to strscpy but here it makes no functional difference, so just keep the right code. Conflicts: net/netfilter/nf_tables_api.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Alexei Starovoitov says: ==================== pull-request: bpf 2020-12-10 The following pull-request contains BPF updates for your *net* tree. We've added 21 non-merge commits during the last 12 day(s) which contain a total of 21 files changed, 163 insertions(+), 88 deletions(-). The main changes are: 1) Fix propagation of 32-bit signed bounds from 64-bit bounds, from Alexei. 2) Fix ring_buffer__poll() return value, from Andrii. 3) Fix race in lwt_bpf, from Cong. 4) Fix test_offload, from Toke. 5) Various xsk fixes. Please consider pulling these changes from: git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git Thanks a lot! Also thanks to reporters, reviewers and testers of commits in this pull-request: Cong Wang, Hulk Robot, Jakub Kicinski, Jean-Philippe Brucker, John Fastabend, Magnus Karlsson, Maxim Mikityanskiy, Yonghong Song ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-10Revert "macb: support the two tx descriptors on at91rm9200"Willy Tarreau
This reverts commit 0a4e9ce17ba77847e5a9f87eed3c0ba46e3f82eb. The code was developed and tested on an MSC313E SoC, which seems to be half-way between the AT91RM9200 and the AT91SAM9260 in that it supports both the 2-descriptors mode and a Tx ring. It turns out that after the code was merged I could notice that the controller would sometimes lock up, and only when dealing with sustained bidirectional transfers, in which case it would report a Tx overrun condition right after having reported being ready, and will stop sending even after the status is cleared (a down/up cycle fixes it though). After adding lots of traces I couldn't spot a sequence pattern allowing to predict that this situation would happen. The chip comes with no documentation and other bits are often reported with no conclusive pattern either. It is possible that my change is wrong just like it is possible that the controller on the chip is bogus or at least unpredictable based on existing docs from other chips. I do not have an RM9200 at hand to test at the moment and a few tests run on a more recent 9G20 indicate that this code path cannot be used there to test the code on a 3rd platform. Since the MSC313E works fine in the single-descriptor mode, and that people using the old RM9200 very likely favor stability over performance, better revert this patch until we can test it on the original platform this part of the driver was written for. Note that the reverted patch was actually tested on MSC313E. Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Daniel Palmer <daniel@0x0f.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/netdev/20201206092041.GA10646@1wt.eu/ Signed-off-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-01 17:14:22 +0000