summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
AgeCommit message (Collapse)Author
2014-09-26qlcnic: Fix ordering of stats in stats buffer.Manish Chopra
o When TX queues are not allocated, driver does not fill TX queues stats in the buffer. However, it is also not advancing data pointer by TX queue stats length, which would misplace all successive stats data in the buffer and will result in mismatch between stats strings and it's values. o Fix this by advancing data pointer by TX queue stats length when queues are not allocated. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26qlcnic: Remove __QLCNIC_DEV_UP bit check to read TX queues statistics.Manish Chopra
o TX queues stats must be read when queues are allocated regardless of interface is up or not. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-26qlcnic: Fix memory corruption while reading stats using ethtool.Manish Chopra
o Driver is doing memset with zero for total number of stats bytes when it has already filled some data in the stats buffer, which can overwrite memory area beyond the length of stats buffer. o Fix this by initializing stats buffer with zero before filling any data in it. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-05qlcnic: Fix update of ethtool stats.Rajesh Borundia
o Aggregating tx stats in adapter variable was resulting in an increase in stats even after no traffic was run and user runs ifconfig/ethtool command. o qlcnic_update_stats used to accumulate stats in adapter struct at each function call, instead accumulate tx stats in local variable and then assign it to adapter structure. Reported-by: Holger Kiehl <holger.kiehl@dwd.de> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-11qlcnic: Optimize ring count validationsShahed Shaikh
- Check interrupt mode at the start of qlcnic_set_channels(). - Do not validate ring count if they are not going to change. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24qlcnic: Add VXLAN Rx offload supportShahed Shaikh
This patch adds Rx checksum offload support for VXLAN. Implements .ndo_{add|del}_vxlan_port netdev ops. Adapter supports only one VXLAN port, so program adapter with very first UDP port which VXLAN driver is listening to. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-24qlcnic: Add VXLAN Tx offload supportShahed Shaikh
This patch adds LSO, LSO6 and Tx checksum offload support for VXLAN encapsulated packets on 83xx/84xx series adapters. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-24qlcnic: Re-factor firmware minidump template header handlingShahed Shaikh
Treat firmware minidump template headers for 82xx and 83xx/84xx adapters separately, as it may change for 82xx and 83xx/84xx adapter type independently. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23qlcnic: Enhance logic to calculate msix vectors.Himanshu Madhani
o Refactored MSI-x vector calculation for All adapters. Decoupled logic in the code which was using same call to request MSI-x vectors in default driver load, as well as during set_channel() operation for TSS/RSS. This refactoring simplifies code for TSS/RSS code path as well as probe path of the driver load for all adapters. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-23qlcnic: Refactor interrupt coalescing code for all adapters.Himanshu Madhani
o Refactor configuration of interrupt coalescing parameters for all supported adapters. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-17qlcnic: make local functions staticstephen hemminger
Functions only used in one file should be static. Found by running make namespacecheck Compile tested only. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-01-10qlcnic: Fix ethtool statistics length calculationShahed Shaikh
o Consider number of Tx queues while calculating the length of Tx statistics as part of ethtool stats. o Calculate statistics lenght properly for 82xx and 83xx adapter Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-10qlcnic: Fix bug in TX statisticsManish Chopra
o Driver was not updating TX stats so it was not populating statistics in `ifconfig` command output. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c drivers/net/macvtap.c Both minor merge hassles, simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17qlcnic: Support for 16 virtual NIC functions.Jitendra Kalsaria
Extend virtual NIC functions from 8 to 16 for 84xx adapter. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17qlcnic: Fix TSS/RSS validation for 83xx/84xx series adapter.Himanshu Madhani
o Current code was not allowing the user to configure more than one Tx ring using ethtool for 83xx/84xx adapter. This regression was introduced by commit id 18afc102fdcb95d6c7d57f2967a06f2f8fe3ba4c ("qlcnic: Enable multiple Tx queue support for 83xx/84xx Series adapter.") Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17qlcnic: Fix TSS/RSS ring validation logic.Himanshu Madhani
o TSS/RSS ring validation does not take into account that either of these ring values can be 0. This patch fixes this validation and would fail set_channel operation if any of these ring value is 0. This regression was added as part of commit id 34e8c406fda5b5a9d2e126a92bab84cd28e3b5fa ("qlcnic: refactor Tx/SDS ring calculation and validation in driver.") Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17qlcnic: Fix diagnostic test for all adapters.Himanshu Madhani
o Driver should re-allocate all Tx queues after completing diagnostic tests. This regression was added by commit id c2c5e3a0681bb1945c0cb211a5f4baa22cb2cbb3 ("qlcnic: Enable diagnostic test for multiple Tx queues.") Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04qlcnic: Enable multiple Tx queue support for 83xx/84xx Series adapters.Himanshu Madhani
o 83xx and 84xx firmware is capable of multiple Tx queues. This patch will enable multiple Tx queues for 83xx/84xx series adapters. Max number of Tx queues supported will be 8. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04qlcnic: refactor Tx/SDS ring calculation and validation in driver.Himanshu Madhani
o Current driver has duplicate code for validating user input for changing Tx/SDS rings using set_channel ethtool interface. This patch removes duplicate code and refactored Tx/SDS ring validation for 82xx/83xx/84xx series adapter. o Refactored code now calculates maximum Tx/Rx ring driver can support based on Default, NPAR and SRIOV PF/VF mode of driver. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04qlcnic: Enhance ethtool Statistics for Multiple Tx queue.Himanshu Madhani
o Enhance ethtool statistics to display multiple Tx queue stats for all supported adapters. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-04qlcnic: Register netdev in FAILED state for 83xx/84xxSucheta Chakraborty
o Without failing probe, register netdev when device is in FAILED state. o Device will come up with minimum functionality and allow diagnostics and repair of the adapter. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/qmi_wwan.c include/net/dst.h Trivial merge conflicts, both were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18qlcnic: Validate Tx queue only for 82xx adapters.Himanshu Madhani
o validate Tx queue only in case of adapters which supports multi Tx queue. This patch is to fix regression introduced in commit aa4a1f7df7cbb98797c9f4edfde3c726e2b3841f "qlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter" Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-18qlcnic: Enhance ethtool to display ring indices and interrupt maskPratik Pujar
o Updated ethtool -d <ethX> option to display ring indices for Transmit(Tx), Receive(Rx), and Status(St) rings. o Updated ethtool -d <ethX> option to display ring interrupt mask for Transmit(Tx), and Status(St) rings. Signed-off-by: Pratik Pujar <pratik.pujar@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-27qlcnic: Fix register device in FAILED state for 82xx.Sucheta Chakraborty
o Commit 7e2cf4feba058476324dc545e3d1b316998c91e6 ("qlcnic: change driver hardware interface mechanism") has overwritten commit b43e5ee76a4320c070cf0fe65cf4927198fbb4d1 ("qlcnic: Register device in FAILED state") Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-04qlcnic: remove a stray semicolonDan Carpenter
Just remove a small semicolon. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-31qlcnic: Store firmware dump state in CAMRAM registerShahed Shaikh
-Use CAMRAM register to store firmware dump state in adapter instead of maintaining it in each function driver separately. -Return appropriate error code on failure Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21qlcnic: Enable diagnostic test for multiple Tx queues.Himanshu Madhani
o Enable diagnostic test via ethtool and QConvergeConsole application when Multiple Tx queues are enabled on 82xx series adapters. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-21qlcnic: Enable Tx queue changes using ethtool for 82xx Series adapter.Himanshu Madhani
o using ethtool {set|get}_channel option, user can change number of Tx queues for 82xx Series adapter. o updated ethtool -S <ethX> option to display stats from each Tx queue. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Merge net into net-next to setup some infrastructure Eric Dumazet needs for usbnet changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix for flash update failure on 83xx adapterHimanshu Madhani
Flash update routine was improperly checking register read API return value. Modify register read API and perform proper error check. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix link speed display for 82xx adapterRajesh Borundia
o Do not obtain link speed from register when adapter link is down. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-03qlcnic: Fix external loopback test.Shahed Shaikh
Driver was not handling external loopback diagnostic test request. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01qlcnic: Enhance diagnostic loopback error codes.Jitendra Kalsaria
o Enhanced the driver to use standard Linux error codes o Return a unique error code to indicate loopback is in progress Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-07-19qlcnic: Fix invalid register offset calculationShahed Shaikh
83xx adapter specific code was accessing 82xx register which resulted in invalid register offset. This patch uses proper register access method. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-23qlcnic: Handle qlcnic_alloc_mbx_args() failureShahed Shaikh
qlcnic_alloc_mbx_args() may fail due to failure in memory allocation. This patch checks for failure of qlcnic_alloc_mbx_args() to avoid potential invalid memory access. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-11qlcnic: Fix ethtool supported port status for 83xxHimanshu Madhani
o Fix display for interface while using 'ethtool <device>' for 83xx adapter Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-11qlcnic: Fix ethtool stringsShahed Shaikh
o Add missing information in ethtool statistics information array. o Fix the typo in the statistics information string. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Enable Interrupt Coalescing for 83xx adapterHimanshu Madhani
Enable Interrupt coalescing through ethtool on 83xx adapter. Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Add eSwitch statistics supportShahed Shaikh
o Read eSwitch statistics from adapter and display them as part of ethtool statistics. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24qlcnic: Enhance channel configuration logsManish Chopra
o Add logs for various failure conditions during channel configuration. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19qlcnic: Fix loopback test for SR-IOV PF.Rajesh Borundia
o Do not disable mailbox interrupts while running loopback test through SR-IOV PF. Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09qlcnic: Fix ethtool statistics collectionShahed Shaikh
o Properly fill statistics data into buffer. Update buffer pointer properly after filling statistics data into buffer. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09qlcnic: Fix ethtool statistics for 82xx adapterShahed Shaikh
o Fix miscalculation of statistics length Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-09qlcnic: Enable LED test support for 83xx adapterHimanshu Madhani
o Add support for LED test on 83xx series adapters Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11qlcnic: refactor 83xx diagnostic IRQ testJitendra Kalsaria
Cleanly separate 83xx diagnostic IRQ test from 82xx Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-11qlcnic: refactor 83xx diagnostic loopback testJitendra Kalsaria
Cleanly separate 83xx diagnostic loopback test routines from 82xx Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-04qlcnic: Updating copyright information.Jitendra Kalsaria
We recently refactored the driver source, this patch will take care of updating copyright date and adding it to newly added files. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 03:12:41 +0000