summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qlogic/qede/qede_ethtool.c
AgeCommit message (Collapse)Author
2020-03-16qede: remove some unused code in function qede_selftest_receive_trafficZheng Zengkai
Remove set but not used variables 'sw_comp_cons' and 'hw_comp_cons' to fix gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/qlogic/qede/qede_ethtool.c: In function qede_selftest_receive_traffic: drivers/net/ethernet/qlogic/qede/qede_ethtool.c:1569:20: warning: variable sw_comp_cons set but not used [-Wunused-but-set-variable] drivers/net/ethernet/qlogic/qede/qede_ethtool.c: In function qede_selftest_receive_traffic: drivers/net/ethernet/qlogic/qede/qede_ethtool.c:1569:6: warning: variable hw_comp_cons set but not used [-Wunused-but-set-variable] After removing 'hw_comp_cons',the memory barrier 'rmb()' and its comments become useless, so remove them as well. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-14net: qede: reject unsupported coalescing paramsJakub Kicinski
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11qed*: Fix size of config attribute dump.Sudarsana Reddy Kalluru
Driver currently returns max-buf-size as size of the config attribute. This patch incorporates changes to read this value from MFW (if available) and provide it to the user. Also did a trivial clean up in this path. Fixes: d44a3ced7023 ("qede: Add support for reading the config id attributes.") Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qede: Add support for dumping the grc data.Sudarsana Reddy Kalluru
This patch adds driver support for configuring grc dump config flags, and dumping the grc data via ethtool get/set-dump interfaces. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31qede: Add support for reading the config id attributes.Sudarsana Reddy Kalluru
Add driver support for dumping the config id attributes via ethtool dump interfaces. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08qed: Add new ethtool supported port types based on media.Rahul Verma
Supported ports in ethtool <eth1> are displayed based on media type. For media type fibre and twinaxial, port type is "FIBRE". Media type Base-T is "TP" and media KR is "Backplane". V1->V2: Corrected the subject. Signed-off-by: Rahul Verma <rahulv@marvell.com> Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29qede: Handle infinite driver spinning for Tx timestamp.Sudarsana Reddy Kalluru
In PTP Tx implementation, driver kept scheduling a poll thread until the timestamp is available. In the error scenarios (e.g. app requesting the timestamp for non-ptp packet), this thread kept waiting for the timestamp forever. This patch add changes to report such scenario as an error and terminate the thread. Added a timeout of 2 seconds i.e., max time to wait for Tx timestamp. Added a stat value ptp_skip_txts for reporting the number of packets for which Tx timestamping is skipped. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-03-20qede: Populate mbi version in ethtool driver query data.Sudarsana Reddy Kalluru
The patch adds support to display MBI image version in 'ethtool -i' output. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-07qede: Fix internal loopback failure with jumbo mtu configurationSudarsana Reddy Kalluru
Driver uses port-mtu as packet-size for the loopback traffic. This patch limits the max packet size to 1.5K to avoid data being split over multiple buffer descriptors (BDs) in cases where MTU > PAGE_SIZE. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08qede: Add ethtool interface for SmartAN query.Sudarsana Reddy Kalluru
The patch adds driver support to query SmartAN capability via ethtool. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29qede - Add a statistic for a case where driver drops tx packet due to memory ↵Michael Shteinbok
allocation failure. skb_linearization can fail due to memory allocation failure. In such a case, the driver will drop the packet. In such a case The driver used to print an error message. This patch replaces this error message by a dedicated statistic. Signed-off-by: Michael Shteinbok <michael.shteinbok@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16qede: Check available link modes before link set from ethtool.Rahul Verma
Set link mode after checking available "supported" link caps of the port. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16qed: Add supported link and advertise link to display in ethtool.Rahul Verma
Added transceiver type, speed capability and board types in HSI, are utilizing to display the accurate link information in ethtool. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02qede: Add driver support for 20G link speed.Sudarsana Reddy Kalluru
Add driver support for reading/configuring the 20G link speed via ethtool. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09qede: Ingress tc flower offload (drop action) support.Manish Chopra
The main motive of this patch is to lay down driver's tc offload infrastructure in place. With these changes tc can offload various supported flow profiles (4 tuples, src-ip, dst-ip, l4 port) for the drop action. Dropped flows statistic is a global counter for all the offloaded flows for drop action and is populated in ethtool statistics as common "gft_filter_drop". Examples - tc qdisc add dev p4p1 ingress tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_ip 192.168.40.200 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto udp src_ip 192.168.40.100 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp src_ip 192.168.40.100 dst_ip 192.168.40.200 \ src_port 453 dst_port 876 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_port 98 action drop Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09qed/qede: Multi CoS support.Manish Chopra
This patch adds support for tc mqprio offload, using this different traffic classes on the adapter can be utilized based on configured priority to tc map. For example - tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 This will cause SKBs with priority 0,1,2,3 to transmit over tc 0,1,2,3 hardware queues respectively. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19qede: Add driver callbacks for eeprom module query.Sudarsana Reddy Kalluru
This patch implements the ethtool callbacks for querying sfp/eeprom module. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31qed*: Add link change count value to ethtool statistics display.Sudarsana Reddy Kalluru
This patch adds driver changes for capturing the link change count in ethtool statistics display. Please consider applying this to "net-next". Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qed*: Support drop action classificationManish Chopra
With this patch, User can configure for the supported flows to be dropped. Added a stat "gft_filter_drop" as well to be populated in ethtool for the dropped flows. For example - ethtool -N p5p1 flow-type udp4 dst-port 8000 action -1 ethtool -N p5p1 flow-type tcp4 scr-ip 192.168.8.1 action -1 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17qede: Add build_skb() support.Manish Chopra
This patch makes use of build_skb() throughout in driver's receieve data path [HW gro flow and non HW gro flow]. With this, driver can build skb directly from the page segments which are already mapped to the hardware instead of allocating new SKB via netdev_alloc_skb() and memcpy the data which is quite costly. This really improves performance (keeping same or slight gain in rx throughput) in terms of CPU utilization which is significantly reduced [almost half] in non HW gro flow where for every incoming MTU sized packet driver had to allocate skb, memcpy headers etc. Additionally in that flow, it also gets rid of bunch of additional overheads [eth_get_headlen() etc.] to split headers and data in the skb. Tested with: system: 2 sockets, 4 cores per socket, hyperthreading, 2x4x2=16 cores iperf [server]: iperf -s iperf [client]: iperf -c <server_ip> -t 500 -i 10 -P 32 HW GRO off – w/o build_skb(), throughput: 36.8 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.59 0.00 32.93 0.00 0.00 43.07 0.00 0.00 23.42 HW GRO off - with build_skb(), throughput: 36.9 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.70 0.00 31.70 0.00 0.00 25.68 0.00 0.00 41.92 HW GRO on - w/o build_skb(), throughput: 36.9 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.86 0.00 24.14 0.00 0.00 6.59 0.00 0.00 68.41 HW GRO on - with build_skb(), throughput: 37.5 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.87 0.00 23.75 0.00 0.00 6.19 0.00 0.00 69.19 Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qede: Ethtool flash update support.Sudarsana Reddy Kalluru
The patch adds ethtool callback implementation for flash update. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19qede: Use NETIF_F_GRO_HW.Michael Chan
Advertise NETIF_F_GRO_HW and set edev->gro_disable according to the feature flag. Add qede_fix_features() to drop NETIF_F_GRO_HW if XDP is running or MTU does not support GRO_HW or GRO is not set. qede_change_mtu() also checks and disables GRO_HW if MTU is not supported. Cc: Ariel Elior <Ariel.Elior@cavium.com> Cc: everest-linux-l2@cavium.com Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Acked-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27qed: Read per queue coalesce from hardwareRahul Verma
Retrieve the actual coalesce value from hardware for every Rx/Tx queue, instead of Rx/Tx coalesce value cached during set coalesce. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27qed: Add support for vf coalesce configuration.Rahul Verma
This patch add the ethtool support to set RX/Tx coalesce value to the VF associated Rx/Tx queues. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27qede: Add ethtool support for Energy efficient ethernet.Sudarsana Reddy Kalluru
The patch adds ethtool callback implementations for querying/configuring the Energy Efficient Ethernet (EEE) parameters. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27qed/qede: Add setter APIs support for RX flow classificationChopra, Manish
This patch adds support for adding and deleting rx flow classification rules. Using this user can classify RX flow constituting of TCP/UDP 4-tuples [src_ip/dst_ip and src_port/dst_port] to be steered on a given RX queue Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27qede: Add getter APIs support for RX flow classificationChopra, Manish
This patch adds support for ethtool getter APIs to query RX flow classification rules. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Yuval Mintz <yuval.mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-24qede: Fix sparse warningsManish Chopra
Solves the following warning in qede - - Several cases of missing cpu_to_le16() conversions - Adds 'static' to one function declaration - Removes dcbnl operation that's currently getting populated twice Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Support 1G advertisment.Sudarsana Reddy Kalluru
Some variants of adapters support the 1G speed capability. Need to allow the configuration of 1G speed if adapter supports it. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-21qede: Honor user request for Tx buffersSudarsana Reddy Kalluru
Driver always allocates the maximal number of tx-buffers irrespective of actual Tx ring config. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-04qede: Fix possible misconfiguration of advertised autoneg value.sudarsana.kalluru@cavium.com
Fail the configuration of advertised speed-autoneg value if the config update is not supported. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-04qed*: Fix possible overflow for status block id field.sudarsana.kalluru@cavium.com
Value for status block id could be more than 256 in 100G mode, need to update its data type from u8 to u16. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-14qed*: Add support for QL41xxx adaptersMintz, Yuval
This adds the necessary infrastructure changes for initializing and working with the new series of QL41xxx adapaters. It also adds 2 new PCI device-IDs to qede: - 0x8070 for QL41xxx PFs - 0x8090 for VFs spawning from QL41xxx PFs Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-20qede: Prevent index problems in loopback testSudarsana Reddy Kalluru
Driver currently utilizes the same loop variable in two nested loops. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-15qede: Add driver support for PTPSudarsana Reddy Kalluru
This patch adds the driver support for, - Registering the ptp clock functionality with the OS. - Timestamping the Rx/Tx PTP packets. - Ethtool callbacks related to PTP. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01qed*: RSS indirection based on queue-handlesMintz, Yuval
A step toward having qede agnostic to the queue configurations in firmware/hardware - let the RSS indirections use queue handles instead of actual queue indices. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-01qed*: Update to dual-licenseMintz, Yuval
Since the submission of the qedr driver, there's inconsistency in the licensing of the various qed/qede files - some are GPLv2 and some are dual-license. Since qedr requires dual-license and it's dependent on both, we're updating the licensing of all qed/qede source files. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Add support for XDP_TXMintz, Yuval
Add support for forwarding via XDP. Once the eBPF is attached, driver would allocate & configure a designated transmission queue meant solely for forwarding packets. Said queue would share the receive-queue's interrupt line, and would have it's own Tx statistics. Infrastructure changes required for this [spread-out through the code]: - Determine the DMA direction of the receive buffers based on the presence of the eBPF program. - Turn the sw Tx ring into a union, as regular/XDP queues have different needs for releasing resources after completion [regular requires the SKB, XDP requires the transmitted page]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Add basic XDP supportMintz, Yuval
Add support for the ndo_xdp callback. This patch would support XDP_PASS, XDP_DROP and XDP_ABORTED commands. This also adds a per Rx queue statistic which counts number of packets which didn't reach the stack [due to XDP]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Better utilize the qede_[rt]x_queueMintz, Yuval
Improve the cacheline usage of both queues by reordering - This reduces the cachelines required for egress datapath processing from 3 to 2 and those required by ingress datapath processing by 2. It also changes a couple of datapath related functions that currently require either the fastpath or the qede_dev, changing them to be based on the tx/rx queue instead. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Revise state locking schemeMintz, Yuval
As qede utilizes an internal-reload sequence as result of various configuration changes, the netif state wouldn't always accurately describe the status of the configuration. To compensate, we're storing an internal state of the device, which should only be accessed under the qede_lock. This patch fixes and improves several state/lock interactions: - The internal state should only be checked while locked. - While holding lock, it's preferable to check state rather than the netdevice's state. - The reload sequence is not 'atomic' - unload and subsequent load are not in the same critical section. This also add the 'locked' variant for the reload, which would later be used by XDP - useful in the case where the correct sequence is 'lock, check state and re-configure if good', instead of allowing the reload itself to make the decision regarding the configurability of the device. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Refactor statistics gatheringMintz, Yuval
Refactor logic for gathering statistics into a per-queue function. This improves readability of the driver statistics' flows. In addition, this would be required by the XDP forwarding queues [as we'll need the Txq statistics gathering methods for those as well]. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30qede: Remove 'num_tc'.Mintz, Yuval
Driver currently doesn't support multi-CoS, but it contains logic where multiple transmission queues could be theoretically manipulated. No point in maintaining the infrastructure at the moment. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31qede: Decouple ethtool caps from qedMintz, Yuval
While the qed_lm_maps is closely tied with the QED_LM_* defines, when iterating over the array use actual size instead of the qed define to prevent future possible issues. Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31qed*: Add support for WoLMintz, Yuval
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31qed: Add nvram selftestMintz, Yuval
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-31qed*: Management firmware - notifications and defaultsSudarsana Kalluru
Management firmware is interested in various tidbits about the driver - including the driver state & several configuration related fields [MTU, primtary MAC, etc.]. This adds the necessray logic to update MFW with such configurations, some of which are passed directly via qed while for others APIs are provide so that qede would be able to later configure if needed. This also introduces a new default configuration for MTU which would replace the default inherited by being an ethernet device. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-21 01:46:18 +0000