Age | Commit message (Collapse) | Author | |
---|---|---|---|
2020-02-20 | mlxsw: spectrum_span: Use struct_size() to simplify allocation | Ido Schimmel | |
Allocate the main mirroring struct and the individual structs for the different mirroring agents in a single allocation. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-20 | mlxsw: spectrum_span: Do no expose mirroring agents to entire driver | Ido Schimmel | |
The struct holding the different mirroring agents is currently allocated as part of the main driver struct. This is unlike other driver modules. Allocate the memory required to store the different mirroring agents as part of the initialization of the mirroring module. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-20 | mlxsw: spectrum: Protect counter pool with a lock | Ido Schimmel | |
The counter pool is a shared resource. It is used by both the ACL code to allocate counters for actions and by the routing code to allocate counters for adjacency entries (for example). Currently, all allocations are protected by RTNL, but this is going to change with the removal of RTNL from the routing code. Therefore, protect counter allocations with a spin lock. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-20 | mlxsw: spectrum_kvdl: Protect allocations with a lock | Ido Schimmel | |
The KVDL is used to store objects allocated throughout various places in the driver. For example, both nexthops (adjacency entries) and ACL actions are stored in the KVDL. Currently, all allocations are protected by RTNL, but this is going to change with the removal of RTNL from the routing code. Therefore, protect KVDL allocations with a lock. A mutex is used since the free operation can block in Spectrum-2. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-19 | mlxsw: Replace zero-length array with flexible-array member | Gustavo A. R. Silva | |
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-18 | net/mlx5: Remove a useless 'drain_workqueue()' call in 'mlx5e_ipsec_cleanup()' | Christophe JAILLET | |
'destroy_workqueue()' already calls 'drain_workqueue()', there is no need to call it explicitly. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | net/mlx5e: Add support for FEC modes based on 50G per lane links | Aya Levin | |
Introduce new FEC modes: - RS-FEC-(544,514) - LL_RS-FEC-(272,257+1) Add support in ethtool for set and get callbacks for the new modes above. While RS-FEC-(544,514) is mapped to exsiting RS FEC mode, LL_RS-FEC-(272,257+1) is mapped to a new ethtool link mode: LL-RS. Add support for FEC on 50G per lane link modes up to 400G. The new link modes uses a u16 fields instead of u8 fields for the legacy link modes. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | net/mlxe5: Separate between FEC and current speed | Aya Levin | |
FEC mode is per link type, not necessary per speed. This patch access FEC register by link modes instead of speeds. This patch will allow further enhacment of link modes supporting FEC with the same speed (different lane type). Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | net/mlx5e: Advertise globaly supported FEC modes | Aya Levin | |
Ethtool advertise supported link modes on an interface. Per each FEC mode, query if there is a link type which supports it. If so, add this FEC mode to the supported FEC modes list. Prior to this patch, ethtool advertised only the supported FEC modes on the current link type. Add an explicit mapping between internal FEC modes and ethtool link mode bits. With this change, adding new FEC modes in the downstream patch would be easier. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | net/mlx5e: Enforce setting of a single FEC mode | Aya Levin | |
Ethtool command allow setting of several FEC modes in a single set command. The driver can only set a single FEC mode at a time. With this patch driver will reply not-supported on setting several FEC modes. Signed-off-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | net/mlx5e: Set FEC to auto when configured mode is not supported | Aya Levin | |
When configuring FEC mode, driver tries to set it for all available link types. If a link type doesn't support a FEC mode, set this link type to auto (FW best effort). Prior to this patch, when a link type didn't support a FEC mode is was set to no FEC. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | mlx5: Use proper logging and tracing line terminations | Joe Perches | |
netdev_err should use newline termination but mlx5_health_report is used in a trace output function devlink_health_report where no newline should be used. Remove the newlines from a couple formats and add a format string of "%s\n" to the netdev_err call to not directly output the logging string. Also use snprintf to avoid any possible output string overrun. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | net/mlx5e: Support dump callback in RX reporter | Aya Levin | |
Add support for SQ's FW dump on RX reporter's events. Use Resource dump API to retrieve the relevant data: RX slice, RQ dump, RX buffer and ICOSQ dump (depends on the error). Wrap it in formatted messages and store the binary output in devlink core. Example: $ devlink health dump show pci/0000:00:0b.0 reporter rx RX Slice: data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de RQs: RQ: rqn: 1512 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de RQ: rqn: 1517 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de $ devlink health dump show pci/0000:00:0b.0 reporter rx -jp { "RX Slice": { "data":[ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222] }, "RQs": [ { "RQ": { "index": 1512, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222] } },{ "RQ": { "index": 1517, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173] } } ] } Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | net/mlx5e: Support dump callback in TX reporter | Aya Levin | |
Add support for SQ's FW dump on TX reporter's events. Use Resource dump API to retrieve the relevant data: SX slice, SQ dump and SQ buffer. Wrap it in formatted messages and store the binary output in devlink core. Example: $ devlink health dump show pci/0000:00:0b.0 reporter tx SX Slice: data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff SQs: SQ: index: 1511 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff SQ: index: 1516 data: 00 00 00 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 02 01 00 00 00 00 80 00 01 00 00 00 00 ad de 22 01 00 00 00 00 ad de 00 20 40 90 81 88 ff ff 00 00 00 00 00 00 00 00 15 00 15 00 00 00 00 00 ff ff ff ff 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 81 ae 41 06 00 ea ff ff $ devlink health dump show pci/0000:00:0b.0 reporter tx -jp { "SX Slice": { "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255], }, "SQs": [ { "SQ": { "index": 1511, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255] } },{ "SQ": { "index": 1516, "data": [ 0,0,0,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,2,1,0,0,0,0,128,0,1,0,0,0,0,173,222,34,1,0,0,0,0,173,222,0,32,64,144,129,136,255,255,0,0,0,0,0,0,0,0,21,0,21,0,0,0,0,0,255,255,255,255,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,128,129,174,65,6,0,234,255,255] } } ] } Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | net/mlx5e: Gather reporters APIs together | Aya Levin | |
Assemble all the API's to ease insertion of dump callbacks in the following patches in the set. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-18 | net/mlx5: Add support for resource dump | Aya Levin | |
On driver load: - Initialize resource dump data structure and memory access tools (mkey & pd). - Read the resource dump's menu which contains the FW segment identifier. Each record is identified by the segment name (ASCII). During the driver's course of life, users (like reporters) may request dumps per segment. The user should create a command providing the segment identifier (SW enumeration) and command keys. In return, the user receives a command context. In order to receive the dump, the user should supply the command context and a memory (aligned to a PAGE) on which the dump content will be written. Since the dump may be larger than the given memory, the user may resubmit the command until received an indication of end-of-dump. It is the user's responsibility to destroy the command. Signed-off-by: Aya Levin <ayal@mellanox.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-17 | mlxsw: spectrum: Reduce dependency between bridge and router code | Ido Schimmel | |
Commit f40be47a3e40 ("mlxsw: spectrum_router: Do not force specific configuration order") added a call from the routing code to the bridge code in order to handle the case where VNI should be set on a FID following the joining of the router port to the FID. This is no longer required, as previous patches made VXLAN devices explicitly take a reference on the FID and set VNI on it. Therefore, remove the unnecessary call and simply have the RIF take a reference on the FID without checking if VNI should also be set on it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-17 | mlxsw: spectrum_switchdev: Remove VXLAN checks during FID membership | Ido Schimmel | |
As explained in previous patch, VXLAN devices now take a reference on the FID and not only local ports. Therefore, there is no need for local ports to check if they need to set a VNI on the FID when they join the FID. Remove these unnecessary checks. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-17 | mlxsw: spectrum_switchdev: Have VXLAN device take reference on FID | Ido Schimmel | |
Up until now only local ports and the router port (which is also a local port) took a reference on the corresponding FID (Filtering Identifier) when joining a bridge. For example: 192.0.2.1/24 br0 | +------+------+ | | swp1 vxlan0 In this case the reference count of the FID will be '2'. Since the VXLAN device does not take a reference on the FID, whenever a local port joins the bridge it needs to check if a VXLAN device is already enslaved. If the VXLAN device should be mapped to the FID in question, then the VXLAN device's VNI is set on the FID. Beside the fact that this scheme special-cases the VXLAN device, it also creates an unnecessary dependency between the routing and bridge code: 1. [R] IP address is added on 'br0', which prompts the creation of a RIF and a backing FID 2. [B] VNI is enabled on backing FID 3. [R] Host route corresponding to VXLAN device's source address is promoted to perform NVE decapsulation [R] - Routing code [B] - Bridge code This back and forth dependency will become problematic when a lock is added in the routing code instead of relying on RTNL, as it will result in an AA deadlock. Instead, have the VXLAN device take a reference on the FID just like all the other netdev members of the bridge. In order to correctly handle the case where VXLAN devices are already enslaved to the bridge when it is offloaded, walk the bridge's slaves and replay the configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-17 | mlxsw: spectrum_switchdev: Propagate extack to bridge creation function | Ido Schimmel | |
Propagate extack to bridge creation function so that error messages could be passed to user space via netlink instead of printing them to kernel log. A subsequent patch will pass the new extack argument to more functions. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-17 | mlxsw: spectrum_fid: Use 'refcount_t' for FID reference counting | Ido Schimmel | |
'refcount_t' is very useful for catching over/under flows. Convert the FID (Filtering Identifier) objects to use it instead of 'unsigned int' for their reference count. A subsequent patch in the series will change the way VXLAN devices hold / release the FID reference, which is why the conversion is made now. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-07 | mlxsw: spectrum_dpipe: Add missing error path | Ido Schimmel | |
In case devlink_dpipe_entry_ctx_prepare() failed, release RTNL that was previously taken and free the memory allocated by mlxsw_sp_erif_entry_prepare(). Fixes: 2ba5999f009d ("mlxsw: spectrum: Add Support for erif table entries access") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-07 | mlxsw: core: Add validation of hardware device types for MGPIR register | Vadim Pasternak | |
When reading the number of gearboxes from the hardware, the driver does not validate the returned 'device type' field. The driver can therefore wrongly assume that the queried devices are gearboxes. On Spectrum-3 systems that support different types of devices, this can prevent the driver from loading, as it will try to query the temperature sensors from devices which it assumes are gearboxes and in fact are not. For example: [ 218.129230] mlxsw_minimal 2-0048: Reg cmd access status failed (status=7(bad parameter)) [ 218.138282] mlxsw_minimal 2-0048: Reg cmd access failed (reg_id=900a(mtmp),type=write) [ 218.147131] mlxsw_minimal 2-0048: Failed to setup temp sensor number 256 [ 218.534480] mlxsw_minimal 2-0048: Fail to register core bus [ 218.540714] mlxsw_minimal: probe of 2-0048 failed with error -5 Fix this by validating the 'device type' field. Fixes: 2e265a8b6c094 ("mlxsw: core: Extend hwmon interface with inter-connect temperature attributes") Fixes: f14f4e621b1b4 ("mlxsw: core: Extend thermal core with per inter-connect device thermal zones") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-07 | mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort | Ido Schimmel | |
Unlike IPv4, in IPv6 there is no unique structure to represent the nexthop and both the route and nexthop information are squashed to the same structure ('struct fib6_info'). In order to improve resource utilization the driver consolidates identical nexthop groups to the same internal representation of a nexthop group. Therefore, when the offload indication of a nexthop changes, the driver needs to iterate over all the linked fib6_info and toggle their offload flag accordingly. During abort, all the routes are removed from the device and unlinked from their nexthop group. The offload indication is cleared just before the group is destroyed, but by that time no fib6_info is linked to the group and the offload indication remains set. Fix this by clearing the offload indication just before dropping the reference from the nexthop. Fixes: ee5a0448e72b ("mlxsw: spectrum_router: Set hardware flags for routes") Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-07 | mlxsw: spectrum_router: Prevent incorrect replacement of local table routes | Ido Schimmel | |
The driver uses the same table to represent both the main and local routing tables. Prevent routes in the main table from replacing routes in the local table to reflect the fact that the local table is consulted first during lookup. Fixes: b6a1d871d37a ("mlxsw: spectrum_router: Start using new IPv4 route notifications") Fixes: dacad7b34b59 ("mlxsw: spectrum_router: Start using new IPv6 route notifications") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-02-06 | net/mlx5: Deprecate usage of generic TLS HW capability bit | Tariq Toukan | |
Deprecate the generic TLS cap bit, use the new TX-specific TLS cap bit instead. Fixes: a12ff35e0fb7 ("net/mlx5: Introduce TLS TX offload hardware bits and structures") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-06 | net/mlx5e: TX, Error completion is for last WQE in batch | Tariq Toukan | |
For a cyclic work queue, when not requesting a completion per WQE, a single CQE might indicate the completion of several WQEs. However, in case some WQE in the batch causes an error, then an error completion is issued, breaking the batch, and pointing to the offending WQE in the wqe_counter field. Hence, WQE-specific error CQE handling (like printing, breaking, etc...) should be performed only for the last WQE in batch. Fixes: 130c7b46c93d ("net/mlx5e: TX, Dump WQs wqe descriptors on CQE with error events") Fixes: fd9b4be8002c ("net/mlx5e: RX, Support multiple outstanding UMR posts") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Aya Levin <ayal@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-06 | net/mlx5: IPsec, fix memory leak at mlx5_fpga_ipsec_delete_sa_ctx | Raed Salem | |
SA context is allocated at mlx5_fpga_ipsec_create_sa_ctx, however the counterpart mlx5_fpga_ipsec_delete_sa_ctx function nullifies sa_ctx pointer without freeing the memory allocated, hence the memory leak. Fix by free SA context when the SA is released. Fixes: d6c4f0298cec ("net/mlx5: Refactor accel IPSec code") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-06 | net/mlx5: IPsec, Fix esp modify function attribute | Raed Salem | |
The function mlx5_fpga_esp_validate_xfrm_attrs is wrongly used with negative negation as zero value indicates success but it used as failure return value instead. Fix by remove the unary not negation operator. Fixes: 05564d0ae075 ("net/mlx5: Add flow-steering commands for FPGA IPSec implementation") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-02-06 | net/mlx5: Fix deadlock in fs_core | Maor Gottlieb | |
free_match_list could be called when the flow table is already locked. We need to pass this notation to tree_put_node. It fixes the following lockdep warnning: [ 1797.268537] ============================================ [ 1797.276837] WARNING: possible recursive locking detected [ 1797.285101] 5.5.0-rc5+ #10 Not tainted [ 1797.291641] -------------------------------------------- [ 1797.299917] handler10/9296 is trying to acquire lock: [ 1797.307885] ffff889ad399a0a0 (&node->lock){++++}, at: tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.319694] [ 1797.319694] but task is already holding lock: [ 1797.330904] ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.344707] [ 1797.344707] other info that might help us debug this: [ 1797.356952] Possible unsafe locking scenario: [ 1797.356952] [ 1797.368333] CPU0 [ 1797.373357] ---- [ 1797.378364] lock(&node->lock); [ 1797.384222] lock(&node->lock); [ 1797.390031] [ 1797.390031] *** DEADLOCK *** [ 1797.390031] [ 1797.403003] May be due to missing lock nesting notation [ 1797.403003] [ 1797.414691] 3 locks held by handler10/9296: [ 1797.421465] #0: ffff889cf2c5a110 (&block->cb_lock){++++}, at: tc_setup_cb_add+0x70/0x250 [ 1797.432810] #1: ffff88a030081490 (&comp->sem){++++}, at: mlx5_devcom_get_peer_data+0x4c/0xb0 [mlx5_core] [ 1797.445829] #2: ffff889ad399a0a0 (&node->lock){++++}, at: nested_down_write_ref_node.part.33+0x1a/0x60 [mlx5_core] [ 1797.459913] [ 1797.459913] stack backtrace: [ 1797.469436] CPU: 1 PID: 9296 Comm: handler10 Kdump: loaded Not tainted 5.5.0-rc5+ #10 [ 1797.480643] Hardware name: Dell Inc. PowerEdge R730/072T6D, BIOS 2.4.3 01/17/2017 [ 1797.491480] Call Trace: [ 1797.496701] dump_stack+0x96/0xe0 [ 1797.502864] __lock_acquire.cold.63+0xf8/0x212 [ 1797.510301] ? lockdep_hardirqs_on+0x250/0x250 [ 1797.517701] ? mark_held_locks+0x55/0xa0 [ 1797.524547] ? quarantine_put+0xb7/0x160 [ 1797.531422] ? lockdep_hardirqs_on+0x17d/0x250 [ 1797.538913] lock_acquire+0xd6/0x1f0 [ 1797.545529] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.553701] down_write+0x94/0x140 [ 1797.560206] ? tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.568464] ? down_write_killable_nested+0x170/0x170 [ 1797.576925] ? del_hw_flow_group+0xde/0x1f0 [mlx5_core] [ 1797.585629] tree_put_node+0x1d5/0x210 [mlx5_core] [ 1797.593891] ? free_match_list.part.25+0x147/0x170 [mlx5_core] [ 1797.603389] free_match_list.part.25+0xe0/0x170 [mlx5_core] [ 1797.612654] _mlx5_add_flow_rules+0x17e2/0x20b0 [mlx5_core] [ 1797.621838] ? lock_acquire+0xd6/0x1f0 [ 1797.629028] ? esw_get_prio_table+0xb0/0x3e0 [mlx5_core] [ 1797.637981] ? alloc_insert_flow_group+0x420/0x420 [mlx5_core] [ 1797.647459] ? try_to_wake_up+0x4c7/0xc70 [ 1797.654881] ? lock_downgrade+0x350/0x350 [ 1797.662271] ? __mutex_unlock_slowpath+0xb1/0x3f0 [ 1797.670396] ? find_held_lock+0xac/0xd0 [ 1797.677540] ? mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.686467] mlx5_add_flow_rules+0xdc/0x360 [mlx5_core] [ 1797.695134] ? _mlx5_add_flow_rules+0x20b0/0x20b0 [mlx5_core] [ 1797.704270] ? irq_exit+0xa5/0x170 [ 1797.710764] ? retint_kernel+0x10/0x10 [ 1797.717698] ? mlx5_eswitch_set_rule_source_port.isra.9+0x122/0x230 [mlx5_core] [ 1797.728708] mlx5_eswitch_add_offloaded_rule+0x465/0x6d0 [mlx5_core] [ 1797.738713] ? mlx5_eswitch_get_prio_range+0x30/0x30 [mlx5_core] [ 1797.748384] ? mlx5_fc_stats_work+0x670/0x670 [mlx5_core] [ 1797.757400] mlx5e_tc_offload_fdb_rules.isra.27+0x24/0x90 [mlx5_core] [ 1797.767665] mlx5e_tc_add_fdb_flow+0xaf8/0xd40 [mlx5_core] [ 1797.776886] ? mlx5e_encap_put+0xd0/0xd0 [mlx5_core] [ 1797.785562] ? mlx5e_alloc_flow.isra.43+0x18c/0x1c0 [mlx5_core] [ 1797.795353] __mlx5e_add_fdb_flow+0x2e2/0x440 [mlx5_core] [ 1797.804558] ? mlx5e_tc_update_neigh_used_value+0x8c0/0x8c0 [mlx5_core] [ 1797.815093] ? wait_for_completion+0x260/0x260 [ 1797.823272] mlx5e_configure_flower+0xe94/0x1620 [mlx5_core] [ 1797.832792] ? __mlx5e_add_fdb_flow+0x440/0x440 [mlx5_core] [ 1797.842096] ? down_read+0x11a/0x2e0 [ 1797.849090] ? down_write+0x140/0x140 [ 1797.856142] ? mlx5e_rep_indr_setup_block_cb+0xc0/0xc0 [mlx5_core] [ 1797.866027] tc_setup_cb_add+0x11a/0x250 [ 1797.873339] fl_hw_replace_filter+0x25e/0x320 [cls_flower] [ 1797.882385] ? fl_hw_destroy_filter+0x1c0/0x1c0 [cls_flower] [ 1797.891607] fl_change+0x1d54/0x1fb6 [cls_flower] [ 1797.899772] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.910728] ? lock_downgrade+0x350/0x350 [ 1797.918187] ? __radix_tree_lookup+0xa5/0x130 [ 1797.926046] ? fl_set_key+0x1590/0x1590 [cls_flower] [ 1797.934611] ? __rhashtable_insert_fast.constprop.50+0x9f0/0x9f0 [cls_flower] [ 1797.945673] tc_new_tfilter+0xcd1/0x1240 [ 1797.953138] ? tc_del_tfilter+0xb10/0xb10 [ 1797.960688] ? avc_has_perm_noaudit+0x92/0x320 [ 1797.968721] ? avc_has_perm_noaudit+0x1df/0x320 [ 1797.976816] ? avc_has_extended_perms+0x990/0x990 [ 1797.985090] ? mark_lock+0xaa/0x9e0 [ 1797.991988] ? match_held_lock+0x1b/0x240 [ 1797.999457] ? match_held_lock+0x1b/0x240 [ 1798.006859] ? find_held_lock+0xac/0xd0 [ 1798.014045] ? symbol_put_addr+0x40/0x40 [ 1798.021317] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.029460] ? tc_del_tfilter+0xb10/0xb10 [ 1798.036810] rtnetlink_rcv_msg+0x4d5/0x620 [ 1798.044236] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.052034] ? lockdep_hardirqs_on+0x250/0x250 [ 1798.059837] ? match_held_lock+0x1b/0x240 [ 1798.067146] ? find_held_lock+0xac/0xd0 [ 1798.074246] netlink_rcv_skb+0xc6/0x1f0 [ 1798.081339] ? rtnl_bridge_getlink+0x460/0x460 [ 1798.089104] ? netlink_ack+0x440/0x440 [ 1798.096061] netlink_unicast+0x2d4/0x3b0 [ 1798.103189] ? netlink_attachskb+0x3f0/0x3f0 [ 1798.110724] ? _copy_from_iter_full+0xda/0x370 [ 1798.118415] netlink_sendmsg+0x3ba/0x6a0 [ 1798.125478] ? netlink_unicast+0x3b0/0x3b0 [ 1798.132705] ? netlink_unicast+0x3b0/0x3b0 [ 1798.139880] sock_sendmsg+0x94/0xa0 [ 1798.146332] ____sys_sendmsg+0x36c/0x3f0 [ 1798.153251] ? copy_msghdr_from_user+0x165/0x230 [ 1798.160941] ? kernel_sendmsg+0x30/0x30 [ 1798.167738] ___sys_sendmsg+0xeb/0x150 [ 1798.174411] ? sendmsg_copy_msghdr+0x30/0x30 [ 1798.181649] ? lock_downgrade+0x350/0x350 [ 1798.188559] ? rcu_read_lock_sched_held+0xd0/0xd0 [ 1798.196239] ? __fget+0x21d/0x320 [ 1798.202335] ? do_dup2+0x2a0/0x2a0 [ 1798.208499] ? lock_downgrade+0x350/0x350 [ 1798.215366] ? __fget_light+0xd6/0xf0 [ 1798.221808] ? syscall_trace_enter+0x369/0x5d0 [ 1798.229112] __sys_sendmsg+0xd3/0x160 [ 1798.235511] ? __sys_sendmsg_sock+0x60/0x60 [ 1798.242478] ? syscall_trace_enter+0x233/0x5d0 [ 1798.249721] ? syscall_slow_exit_work+0x280/0x280 [ 1798.257211] ? do_syscall_64+0x1e/0x2e0 [ 1798.263680] do_syscall_64+0x72/0x2e0 [ 1798.269950] entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel") Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Alaa Hleihel <alaa@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-01-31 | mlxsw: spectrum_qdisc: Fix 64-bit division error in mlxsw_sp_qdisc_tbf_rate_kbps | Nathan Chancellor | |
When building arm32 allmodconfig: ERROR: "__aeabi_uldivmod" [drivers/net/ethernet/mellanox/mlxsw/mlxsw_spectrum.ko] undefined! rate_bytes_ps has type u64, we need to use a 64-bit division helper to avoid a build error. Fixes: a44f58c41bfb ("mlxsw: spectrum_qdisc: Support offloading of TBF Qdisc") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> | |||
2020-01-27 | mlxsw: minimal: Fix an error handling path in 'mlxsw_m_port_create()' | Christophe JAILLET | |
An 'alloc_etherdev()' called is not ballanced by a corresponding 'free_netdev()' call in one error handling path. Slighly reorder the error handling code to catch the missed case. Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-27 | mlx5: Use dev_net netdevice notifier registrations | Jiri Pirko | |
Register the dev_net notifier and allow the per-net notifier to follow the device into different namespace. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-26 | Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net | David S. Miller | |
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-25 | mlxsw: spectrum_qdisc: Support offloading of TBF Qdisc | Petr Machata | |
React to the TC messages that were introduced in a preceding patch and configure egress maximum shaper as appropriate. TBF can be used as a root qdisc or under one of PRIO or strict ETS bands. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-25 | mlxsw: spectrum: Configure shaper rate and burst size together | Petr Machata | |
In order to allow configuration of burst size together with shaper rate, extend mlxsw_sp_port_ets_maxrate_set() with a burst_size argument. Convert call sites to pass 0 (for default). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-25 | mlxsw: spectrum: Add lowest_shaper_bs to struct mlxsw_sp | Petr Machata | |
Lower limit of burst size configuration is dependent on system type. Add a datum to track the value. Initialize as appropriate in mlxsw_spX_init(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-25 | mlxsw: reg: Increase MLXSW_REG_QEEC_MAS_DIS | Petr Machata | |
As the port speeds grow, the current value of "unlimited shaper", 200000000Kbps, might become lower than the actually supported speeds. Bump it to the maximum value that fits in the corresponding QEEC field, which is about 2.1Tbps. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-25 | mlxsw: reg: Add max_shaper_bs to QoS ETS Element Configuration | Petr Machata | |
The QEEC register configures scheduling elements. One of the bits of configuration is the burst size to use for the shaper installed on the element. Add the necessary fields to support this configuration. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-25 | mlxsw: spectrum_qdisc: Extract a common leaf unoffload function | Petr Machata | |
When the RED Qdisc is unoffloaded, it needs to reduce the reported backlog by the amount that is in the HW, so that only the SW backlog is contained in the counter. The same thing will need to be done by TBF, and likely any other leaf Qdisc as well. Extract a helper mlxsw_sp_qdisc_leaf_unoffload() and call it from mlxsw_sp_qdisc_red_unoffload(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-25 | mlxsw: spectrum_qdisc: Add mlxsw_sp_qdisc_get_class_stats() | Petr Machata | |
Add a wrapper around mlxsw_sp_qdisc_collect_tc_stats() and mlxsw_sp_qdisc_update_stats() for the simple case of doing both in one go: mlxsw_sp_qdisc_get_class_stats(). Dispatch to that function from mlxsw_sp_qdisc_get_red_stats(). This new function will be useful for other leaf Qdiscs as well. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-25 | mlxsw: spectrum_qdisc: Extract a per-TC stat function | Petr Machata | |
Extract from mlxsw_sp_qdisc_get_prio_stats() two new functions: mlxsw_sp_qdisc_collect_tc_stats() to accumulate stats for that one TC only, and mlxsw_sp_qdisc_update_stats() that makes the stats relative to base values stored earlier. Use them from mlxsw_sp_qdisc_get_red_stats(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net> | |||
2020-01-24 | net/mlx5e: kTLS, Do not send decrypted-marked SKBs via non-accel path | Tariq Toukan | |
When TCP out-of-order is identified (unexpected tcp seq mismatch), driver analyzes the packet and decides what handling should it get: 1. go to accelerated path (to be encrypted in HW), 2. go to regular xmit path (send w/o encryption), 3. drop. Packets marked with skb->decrypted by the TLS stack in the TX flow skips SW encryption, and rely on the HW offload. Verify that such packets are never sent un-encrypted on the wire. Add a WARN to catch such bugs, and prefer dropping the packet in these cases. Fixes: 46a3ea98074e ("net/mlx5e: kTLS, Enhance TX resync flow") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-01-24 | net/mlx5e: kTLS, Remove redundant posts in TX resync flow | Tariq Toukan | |
The call to tx_post_resync_params() is done earlier in the flow, the post of the control WQEs is unnecessarily repeated. Remove it. Fixes: 700ec4974240 ("net/mlx5e: kTLS, Fix missing SQ edge fill") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-01-24 | net/mlx5e: kTLS, Fix corner-case checks in TX resync flow | Tariq Toukan | |
There are the following cases: 1. Packet ends before start marker: bypass offload. 2. Packet starts before start marker and ends after it: drop, not supported, breaks contract with kernel. 3. packet ends before tls record info starts: drop, this packet was already acknowledged and its record info was released. Add the above as comment in code. Mind possible wraparounds of the TCP seq, replace the simple comparison with a call to the TCP before() method. In addition, remove logic that handles negative sync_len values, as it became impossible. Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support") Fixes: 46a3ea98074e ("net/mlx5e: kTLS, Enhance TX resync flow") Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-01-24 | net/mlx5e: Clear VF config when switching modes | Dmytro Linkin | |
Currently VF in LEGACY mode are not able to go up. Also in OFFLOADS mode, when switching to it first time, VF can go up independently to his representor, which is not expected. Perform clearing of VF config when switching modes and set link state to AUTO as default value. Also, when switching to OFFLOADS mode set link state to DOWN, which allow VF link state to be controlled by its REP. Fixes: 1ab2068a4c66 ("net/mlx5: Implement vports admin state backup/restore") Fixes: 556b9d16d3f5 ("net/mlx5: Clear VF's configuration on disabling SRIOV") Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-01-24 | net/mlx5: DR, use non preemptible call to get the current cpu number | Erez Shitrit | |
Use raw_smp_processor_id instead of smp_processor_id() otherwise we will get the following trace in debug-kernel: BUG: using smp_processor_id() in preemptible [00000000] code: devlink caller is dr_create_cq.constprop.2+0x31d/0x970 [mlx5_core] Call Trace: dump_stack+0x9a/0xf0 debug_smp_processor_id+0x1f3/0x200 dr_create_cq.constprop.2+0x31d/0x970 genl_family_rcv_msg+0x5fd/0x1170 genl_rcv_msg+0xb8/0x160 netlink_rcv_skb+0x11e/0x340 Fixes: 297cccebdc5a ("net/mlx5: DR, Expose an internal API to issue RDMA operations") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-01-24 | net/mlx5: E-Switch, Prevent ingress rate configuration of uplink rep | Eli Cohen | |
Since the implementation relies on limiting the VF transmit rate to simulate ingress rate limiting, and since either uplink representor or ecpf are not associated with a VF, we limit the rate limit configuration for those ports. Fixes: fcb64c0f5640 ("net/mlx5: E-Switch, add ingress rate support") Signed-off-by: Eli Cohen <eli@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-01-24 | net/mlx5: DR, Enable counter on non-fwd-dest objects | Erez Shitrit | |
The current code handles only counters that attached to dest, we still have the cases where we have counter on non-dest, like over drop etc. Fixes: 6a48faeeca10 ("net/mlx5: Add direct rule fs_cmd implementation") Signed-off-by: Hamdan Igbaria <hamdani@mellanox.com> Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> | |||
2020-01-24 | net/mlx5: Update the list of the PCI supported devices | Meir Lichtinger | |
Add the upcoming ConnectX-7 device ID. Fixes: 85327a9c4150 ("net/mlx5: Update the list of the PCI supported devices") Signed-off-by: Meir Lichtinger <meirl@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> |