summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40e/i40e_debugfs.c
AgeCommit message (Collapse)Author
2020-09-14i40e: use 16B HW descriptors instead of 32BBjörn Töpel
The i40e NIC supports two flavors of HW descriptors, 16 and 32 byte. The latter has, obviously, room for more offloading information. However, the only fields of the 32B HW descriptor that is being used by the driver, is also available in the 16B descriptor. In other words; Reading and writing 32 bytes instead of 16 byte is a waste of bus bandwidth. This commit starts using 16 byte descriptors instead of 32 byte descriptors. For AF_XDP the rx_drop benchmark was improved by 2%. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01i40e: introduce new dump desc XDP commandCiara Loftus
Interfaces already exist for dumping Rx and Tx descriptor information. Introduce another for doing the same for XDP descriptors. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-07-01i40e: add XDP ring statistics to dump VSI debug outputCiara Loftus
Prior to this, only the Rx and Tx ring statistics were dumped. The XDP ring statistics are now dumped as well. Signed-off-by: Ciara Loftus <ciara.loftus@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-06-25i40e: remove unused definesJesse Brandeburg
Remove all the unused defines as they are just dead weight. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-09i40e: Remove EMPR traces from debugfs facilityMauro S. M. Rodrigues
Since commit '5098850c9b9b ("i40e/i40evf: i40e_register.h updates")' it is no longer possible to trigger an EMP Reset from debugfs, but it's possible to request it either way, to end up with a bad reset request: echo empr > /sys/kernel/debug/i40e/0002\:01\:00.1/command i40e 0002:01:00.1: debugfs: forcing EMPR i40e 0002:01:00.1: bad reset request 0x00010000 So let's remove this piece of code and show the available valid commands as it is when any invalid command is issued. Signed-off-by: "Mauro S. M. Rodrigues" <maurosr@linux.vnet.ibm.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-10i40e: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-26i40e: Fix descriptor count manipulationMaciej Fijalkowski
Changing descriptor count via 'ethtool -G' is not persistent across resets. When PF reset occurs, we roll back to the default value of vsi->num_desc, which is used then in i40e_alloc_rings to set descriptor count. XDP does a PF reset so when user has changed the descriptor count and load XDP program, the default count will be back there. To fix this: * introduce new VSI members - num_tx_desc and num_rx_desc in favour of num_desc * set them in i40e_set_ringparam to user's values * set them to default values in i40e_set_num_rings_in_vsi only when they don't have previous values Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-05i40e: Use LLDP ethertype define ETH_P_LLDPAnirudh Venkataramanan
Remove references to I40E_ETH_P_LLDP and use ETH_P_LLDP instead. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Further implementation of LLDPAleksandr Loktionov
This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: remove debugfs tx_timeout supportLihong Yang
The tx_timeout command from debugfs was originally intended to support early silicon validation efforts. It is no longer needed. Thus remove it to avoid misuse of triggering tx_timeout through debugfs. Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03i40e: Remove unnecessary print statementNathan Chancellor
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/net/ethernet/intel/i40e/i40e_debugfs.c:136:9: warning: address of array 'vsi->active_vlans' will always evaluate to 'true' [-Wpointer-bool-conversion] vsi->active_vlans ? "<valid>" : "<null>"); ~~~~~^~~~~~~~~~~~ ~ ./include/linux/device.h:1431:33: note: expanded from macro 'dev_info' _dev_info(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~ 1 warning generated. Given that the statement shows that active_vlans is always valid, just remove the statement since it's not giving any useful information. Link: https://github.com/ClangBuiltLinux/linux/issues/82 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-30i40e/i40evf: cleanup incorrect function doxygen commentsJacob Keller
Recent versions of the Linux kernel now warn about incorrect parameter definitions for function comments. Fix up several function comments to correctly reflect the current function arguments. This cleans up the warnings and helps ensure our documentation is accurate. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-13i40e: don't leak memory addressesMitch Williams
Could a Bad Person do Bad Things to a server if they found these addresses printed in the log? Who knows? But let's not take that risk. Remove pointers from a bunch of printks. In some cases, I was able to adjust the message to indicate whether or not the value was null. In others, I just removed the entire message as there was really no hope of saving it. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-12i40e/i40evf: Only track one ITR setting per ring instead of Tx/RxAlexander Duyck
The rings are already split out into Tx and Rx rings so it doesn't make sense to have any single ring store both a Tx and Rx itr_setting value. Since that is the case drop the pair in favor of storing just a single ITR value. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns ↵Mark Rutland
to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-13i40e: Add macro for PF reset bitAmritha Nambiar
Introduce a macro for the bit setting the PF reset flag and update its usages. This makes it easier to use this flag in functions to be introduced in future without encountering checkpatch issues related to alignment and line over 80 characters. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06i40e/i40evf: use DECLARE_BITMAP for stateJesse Brandeburg
When using set_bit and friends, we should be using actual bitmaps, and fix all the locations where we might access it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30i40e: use DECLARE_BITMAP for state fieldsJacob Keller
Instead of assuming our flags fit within an unsigned long, use DECLARE_BITMAP which will ensure that we always allocate enough space. Additionally, use __I40E_STATE_SIZE__ markers as the last element of the enumeration so that the size of the BITMAP is compile-time assigned rather than programmer-time assigned. This ensures that potential future flag additions do not actually overrun the array. This is especially important as 32bit systems would only have 32bit longs instead of 64bit longs as we generally have assumed in the prior code. This change also removes a dereference of the state fields throughout the code, so it does have a bit of code churn. The conversions were automated using sed replacements with an alternation s/&(vsi->back|vsi|pf)->state/\1->state/ s/&adapter->vsi.state/adapter->vsi.state/ For debugfs, we modify the printing so that we can display chunks of the state value on new lines. This ensures that we can print the entire set of state values. Additionally, we now print them as 08lx to ensure that they display nicely. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-30i40e: separate PF and VSI state flagsJacob Keller
Avoid using the same named flags for both vsi->state and pf->state. This makes code review easier, as it is more likely that future authors will use the correct state field when checking bits. Previous commits already found issues with at least one check, and possibly others may be incorrect. This reduces confusion as it is more clear what each flag represents, and which flags are valid for which state field. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-19i40e: dump VF information in debugfsMitch Williams
Dump some internal state about VFs through debugfs. This provides information not available with 'ip link show'. To use, write "dump vf <id>" to the command file, or just "dump vf" to dump information on all of the VFs. Change-ID: Ibe32b7f4ae55d4358c0b903217475f708ada1ecd Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-27i40e: Drop FCoE code from core driver filesAlexander Duyck
Looking over the code for FCoE it looks like the Rx path has been broken at least since the last major Rx refactor almost a year ago. It seems like FCoE isn't supported for any of the Fortville/Fortpark hardware so there isn't much point in carrying the code around, especially if it is broken and untested. Change-ID: I892de8fa551cb129ce2361e738ff82ce55fa229e Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-18i40e: convert to cpu from le16 to generate switch_id correctlyJacob Keller
On Big Endian platforms we would incorrectly calculate the wrong switch id since we did not properly convert the le16 value into CPU format. Caught by sparse. Change-ID: I69a2f9fa064a0a91691f7d0e6fcc206adceb8e36 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: use unsigned printf format specifier for active_filters countJacob Keller
Replace the %d specifier used for printing vsi->active_filters and vsi->promisc_threshold with an unsigned %u format specifier. While it is unlikely in practice that these values will ever reach such a large number they are unsigned values and thus should not be interpreted as negative numbers. Change-ID: Iff050fad5a1c8537c4c57fcd527441cd95cfc0d4 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: store MAC/VLAN filters in a hash with the MAC Address as keyJacob Keller
Replace the mac_filter_list with a static size hash table of 8bits. The primary advantage of this is a decrease in latency of operations related to searching for specific MAC filters, including .set_rx_mode. Using a linked list resulted in several locations which were O(n^2). Using a hash table should give us latency growth closer to O(n*log(n)). Change-ID: I5330bd04053b880e670210933e35830b95948ebb Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-10-31i40e: drop is_vf and is_netdev fields in struct i40e_mac_filterJacob Keller
Originally the is_vf and is_netdev fields were added in order to distinguish between VF and netdev filters in a single VSI. However, it can be noted that we use separate VSI for SRIOV VFs and for netdev VSI. Thus, since a single VSI should only ever have one type of filter, we can simply remove the checks and remove the typing. In a similar fashion, we can note that the only remaining way to get multiple filters of a single type is through a debug command that was added to debugfs. This command is useless in practice, and results in causing bugs if we keep counter tracking but lose the is_vf and is_netdev protections as desired above. Since the only time we'd actually have a counter value besides 0 and 1 is through use of this debugfs hook, we can remove this unnecessary command, and the entire counter logic it required. We vastly simplify mac filters by removing (a) the distinction between VF and netdev filters (b) counting logic (c) the ability to add and remove filters bypassing the stack via debugfs Change-ID: Idf916dd2a1159b1188ddbab5bef6b85ea6bf27d9 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e: Clean up handling of msglevel flags and debug parameterAlexander Duyck
So the i40e driver had a really convoluted configuration for how to handle the debug flags contained in msg_level. Part of the issue is that the driver has its own 32 bit mask that it was using to track a separate set of debug features. From what I can tell it was trying to use the upper 4 bits to determine if the value was meant to represent a bit-mask or the numeric value provided by debug level. What this patch does is clean this up by compressing those 4 bits into bit 31, as a result we just have to perform a check against the value being negative to determine if we are looking at a debug level (positive), or a debug mask (negative). The debug level will populate the msg_level, and the debug mask will populate the debug_mask in the hardware struct. I added similar logic for ethtool. If the value being provided has bit 31 set we assume the value being provided is a debug mask, otherwise we assume it is a msg_enable mask. For displaying we only provide the msg_enable, and if debug_mask is in use we will print it to the dmesg log. Lastly I removed the debugfs interface. It is redundant with what we already have in ethtool and really doesn't belong anyway. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40e: Strip out debugfs hook for Flow Director filter programmingAlexander Duyck
This interface was only ever meant for debug only. Since it is not supposed to be here we are removing it. Change-ID: Id771a1e5e7d3e2b4b7f56591b61fb48c921e1d04 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: fix "dump port" command when NPAR enabledAlan Brady
When using the debugfs to issue the "dump port" command with NPAR enabled, the firmware reports back with invalid argument. The issue occurs because the pf->mac_seid was used to perform the query. This is fine when NPAR is disabled because the switch ID == pf->mac_seid, however this is not the case when NPAR is enabled. This fix instead goes through the VSI to determine the correct ID to use in either case. Change-ID: I0cd67913a7f2c4a2962e06d39e32e7447cc55b6a Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: refactor Rx filter handlingMitch Williams
Properly track filter adds and deletes so the driver doesn't lose filters during resets and up/down cycles. Add a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Implement a simple state machine so the driver can track the status of each filter throughout its lifecycle. Properly manage the overflow promiscuous state for the each VSI, and provide a way for the driver to detect when to exit overflow promiscuous mode. Remove all possible default MAC filters that the firmware may have set up so that the driver can manage these correctly, particularly when VLANs come into play. Remove the LAA flag for filters; instead just send whatever we get through set_mac to the firmware as the LAA for wakeup purposes. Finally, add the state of each filter to debugfs output so we can see what's going on inside the driver's pointy little head. Change-ID: I97c5e366fac2254fa01eaff4f65c0af61dcf2e1f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e/i40evf: Remove unused hardware receive descriptor codeJesse Brandeburg
The hardware supports a 16 byte descriptor for receive, but the driver was never using it in production. There was no performance benefit to the real driver of 16 byte descriptors, so drop a whole lot of complexity while getting rid of the code. Also since the previous patch made us use no-split mode all the time, drop any support in the driver for any other value in dtype and assume it is always zero (aka no-split). Hooray for code removal! Change-ID: I2257e902e4dad84a07b94db6d2e6f4ce69b27bc0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e: Refactor receive routineJesse Brandeburg
This is part 1 of the Rx refactor series, just including changes to i40e. This refactor aligns the receive routine with the one in ixgbe which was highly optimized. This reduces the code we have to maintain and allows for (hopefully) more readable and maintainable RX hot path. In order to do this: - consolidate the receive path into a single function that doesn't use packet split but *does* use pages for Rx buffers. - remove the old _1buf routine - consolidate several routines into helper functions - remove ethtool control over packet split Change-ID: I5ca100721de65992aa0114f8b4bac844b84758e0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e/i40evf: Remove reference to ring->dtypeJesse Brandeburg
As part of the rx-refactor, the dtype variable in the i40e_ring struct is no longer used, so remove it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e: Drop packet split receive routineJesse Brandeburg
As part of preparation for the rx-refactor, remove the packet split receive routine and ancillary code. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-05i40e: remove redundant check on vsi->active_vlansColin King
active_vlans is an unsigned long array, hence a null check on this array is superfluous and can be removed. Detected with static analysis by smatch: drivers/net/ethernet/intel/i40e/i40e_debugfs.c:386 i40e_dbg_dump_vsi_seid() warn: this array is probably non-NULL. 'vsi->active_vlans' Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-19i40e: queue-specific settings for interrupt moderationKan Liang
For i40e driver, each vector has its own ITR register. However, there are no concept of queue-specific settings in the driver proper. Only global variable is used to store ITR values. That will cause problems especially when resetting the vector. The specific ITR values could be lost. This patch move rx_itr_setting and tx_itr_setting to i40e_ring to store specific ITR register for each queue. i40e_get_coalesce and i40e_set_coalesce are also modified accordingly to support queue-specific settings. To make it compatible with old ethtool, if user doesn't specify the queue number, i40e_get_coalesce will return queue 0's value. While i40e_set_coalesce will apply value to all queues. Signed-off-by: Kan Liang <kan.liang@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-17i40e: Removal of code which relies on BASE VEB SEIDKiran Patil
Fixed mapping of SEID is removed from specification. Hence this patch removes code which was using hard coded base VEB SEID. Changed FCoE code to use "hw->pf_id" to obtain correct "idx" and verified. Removed defines for BASE VSI/VEB SEID and BASE_PF_SEID since it is not used anymore. Change-ID: Id507cf4b1fae1c0145e3f08ae9ea5846ea5840de Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: drop unused debugfs file "dump"Jesse Brandeburg
There was a completely unused file "dump" in debugfs that never panned out to be useful. Change-ID: I12bb9e37b5a83299725dda815a8746157baf6562 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: properly show packet split status in debugfsMitch Williams
Get rid of the unused hsplit field in the ring struct and use the existing macro to detect packet split enablement. This allows debugfs dumps of the VSI to properly show which Rx routine is in use. Change-ID: Ic4e9589e6a788ab196ed0850703f704e30c03781 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e/i40evf: use pages correctly in RxMitch Williams
Refactor the packet split Rx code to properly use half-pages for receives. The previous code was doing way more mapping and unmapping than it needed to, and wasn't properly using half-pages. Increment the page use count each time we give a half-page to an skb, knowing that the stack will probably process and release the page before we need it again. Only free and reallocate pages if the count shows that both half-pages are in use. Add counters to track reallocations and page reuse. Change-ID: I534b299196036b64be82b4861a0a4036310a8f22 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: dump descriptor indexes in hexJesse Brandeburg
The debugging helpers for showing descriptor rings were dumping the indexes in decimal and the offsets in hex. Put everything in hex and at least be consistent. Also update copyright year in file header. Change-ID: Ia35a21411a2ddb713772dffb4e8718889fcfc895 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: avoid large memcpy by assigning structJacob Keller
Assign the i40e_pf structure directly instead of using a large memcpy, which avoids a sparse warning and lets the compiler optimize the copy since it knows the size of the structure in advance. Change-ID: I17604e23be2616521eb760290befcb767b52b3f7 Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: add netdev info to VSI dumpShannon Nelson
Add a few more bits of netdev data into the debugfs output for dump VSI. For now, we'll add the features, hw_features, vlan_features, and flags bitflags and the state. More could be added later if needed. Also, tweak a couple nearby output lines for output readability. Change-ID: I9fb5a9da75c9ad7679498ce9ac3ba24d065ddd2e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Reviewed-by: Brandeburg, Jesse <jesse.brandeburg@intel.com> Reviewed-by: Wyborny, Carolyn <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-01i40e: remove unused argumentJesse Brandeburg
With the final edition of the patches to remove sleeps from the driver's entry points, the grab_rtnl argument is no longer needed, so partially revert the commit that added it. Change-ID: Ib9778476242586cc9e58b670f5f48d415cb59003 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-23intel: i40e: fix confused codeRasmus Villemoes
This code is pretty confused. The variable name 'bytes_not_copied' clearly indicates that the programmer knew the semantics of copy_{to,from}_user, but then the return value is checked for being negative and used as a -Exxx return value. I'm not sure this is the proper fix, but at least we get rid of the dead code which pretended to check for access faults. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-23i40e: fix a bug in debugfs with add/del macaddrAnjali Singhai Jain
The new code flow requires us to grab the filter list lock before adding/deleting the filter. Change-ID: I4eaef508ab4da2d1b2e23f20f2a78d931d5b6aeb Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-15i40e: remove FD atr control from debugfsShannon Nelson
Since the flow-director-atr priv flag was added to our ethtool interface, we don't need the on/off control in debugfs. Change-ID: Ib3b599916434ab30ccd40074e71d7a81609b5bb5 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-08i40e/i40evf: clean up some codeJesse Brandeburg
Add missings spaces after declarations, remove another __func__ use, remove uncessary braces, remove unneeded breaks, and useless returns, and generally fix up some code. Change-ID: Ie715d6b64976c50e1c21531685fe0a2bd38c4244 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-24 14:03:25 +0000