summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ibm
AgeCommit message (Collapse)Author
2011-12-08net: make vlan ndo_vlan_rx_[add/kill]_vid return error valueJiri Pirko
Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: net/ipv4/inet_diag.c
2011-11-23ehea: Use round_jiffies_relative to align workqueueAnton Blanchard
Use round_jiffies_relative to align the ehea workqueue and avoid extra wakeups. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-23ehea: Reduce memory usage in buffer poolsAnton Blanchard
Now that we enable multiqueue by default the ehea driver is using quite a lot of memory for its buffer pools. With 4 queues we consume 64MB in the jumbo packet ring, 16MB in the medium packet ring and 16MB in the tiny packet ring. We should only fill the jumbo ring once the MTU is increased but for now halve it's size so it consumes 32MB. Also reduce the tiny packet ring, with 4 queues we had 16k entries which is overkill. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-21iseries_veth: Fix wrong parameter given to sizeof callThomas Jarosch
"remote_list" is of type struct dma_chunk remote_list[VETH_MAX_FRAMES_PER_MSG]; Probably a copy'n'paste error. Signed-off-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-17ibm/emac: fix improper cleanup when device is removed to allow re-bindWolfgang Grandegger
The re-binding (unbind..bind) of an EMAC device fails because the static variable "busy_phy_map" is not updated when the device is removed. Signed-off-by: Wolfgang Grandegger <wg@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-25ehea: fix skb_frag_size typoEric Dumazet
Commit 9e903e085262 ("net: add skb frag size accessors") introduced a typo in ehea driver. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-19net: add skb frag size accessorsEric Dumazet
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove unused tcp_end field in send WQAnton Blanchard
The tcp_end field is not actually used by the hardware, so there is no need to set it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Add GRO supportAnton Blanchard
Add GRO support to the ehea driver. v3: [cascardo] no need to enable GRO, since it's enabled by default [cascardo] vgrp was removed in the vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove LRO supportAnton Blanchard
In preparation for adding GRO to ehea, remove LRO. v3: [cascardo] fixed conflict with vlan cleanup Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Add 64bit statisticsAnton Blanchard
Switch to using ndo_get_stats64 to get 64bit statistics. v3: [cascardo] use rtnl_link_stats64 as port stats Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove some unused definitionsAnton Blanchard
The queue macros are many levels deep and it makes it harder to work your way through them when many of the versions are unused. Remove the unused versions. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Simplify type 3 transmit routineAnton Blanchard
If a nonlinear skb fits within the immediate area, use skb_copy_bits instead of copying the frags by hand. v3: [cascardo] fixed conflict with use of skb frag API Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Merge swqe2 TSO and non TSO pathsAnton Blanchard
write_swqe2_TSO and write_swqe2_nonTSO are almost identical. For TSO we have to set the TSO and mss bits in the wqe and we only put the header in the immediate area, no data. Collapse both functions into write_swqe2_immediate. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Simplify ehea_xmit2 and ehea_xmit3Anton Blanchard
Based on a patch from Michael Ellerman, clean up a significant portion of the transmit path. There was a lot of duplication here. Even worse, we were always checksumming tx packets and ignoring the skb->ip_summed field. Also remove NETIF_F_FRAGLIST from dev->features, I'm not sure why it was enabled. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Allocate large enough skbs to avoid partial cacheline DMA writesAnton Blanchard
The ehea adapter has a mode where it will avoid partial cacheline DMA writes on receive by always padding packets to fall on a cacheline boundary. Unfortunately we currently aren't allocating enough space for a full ethernet MTU packet to be rounded up, so this optimisation doesn't hit. It's unfortunate that the next largest packet size exposed by the hypervisor interface is 2kB, meaning our skb allocation comes out of a 4kB SLAB. However the performance increase due to this optimisation is quite large and my TCP stream numbers increase from 900MB to 1000MB/sec. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Add vlan_featuresAnton Blanchard
We weren't enabling any VLAN features so we missed out on checksum offload and TSO when using VLANs. Enable them. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Dont check NETIF_F_TSO in TX pathAnton Blanchard
It seems like the ehea xmit routine and an ethtool change of TSO mode could race, resulting in corrupt packets. Checking gso_size is enough and we can use the helper function. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove num_tx_qps module optionAnton Blanchard
The num_tx_qps module option allows a user to configure a different number of tx and rx queues. Now the networking stack is multiqueue aware it makes little sense just to enable the tx queues and not the rx queues so remove the option. v3: [cascardo] fixed conflict with get_stats change Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove force_irq logic in napi poll routineAnton Blanchard
commit 18604c548545 (ehea: NAPI multi queue TX/RX path for SMP) added driver specific logic for exiting napi mode. I'm not sure what it was trying to solve and it should be up to the network stack to decide when we are done polling so remove it. v3: [cascardo] Fixed extra parentheses. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Update multiqueue supportAnton Blanchard
The ehea driver had some multiqueue support but was missing the last few years of networking stack improvements: - Use skb_record_rx_queue to record which queue an skb came in on. - Remove the driver specific netif_queue lock and use the networking stack transmit lock instead. - Remove the driver specific transmit queue hashing and use skb_get_queue_mapping instead. - Use netif_tx_{start|stop|wake}_queue where appropriate. We can also remove pr->queue_stopped and just check the queue status directly. - Print all 16 queues in the ethtool stats. We now enable multiqueue by default since it is a clear win on all my testing so far. v3: [cascardo] fixed use_mcs parameter description [cascardo] set ehea_ethtool_stats_keys as const Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-17ehea: Remove NETIF_F_LLTXAnton Blanchard
Remove the deprecated NETIF_F_LLTX feature. Since the network stack now provides the locking we can remove the driver specific pr->xmit_lock. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10emac: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-10ehea: convert to SKB paged frag APIIan Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Breno Leitao <leitao@linux.vnet.ibm.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-07Merge branch 'master' of github.com:davem330/netDavid S. Miller
Conflicts: net/batman-adv/soft-interface.c
2011-09-27ehea: Remove sleep at .ndo_get_statsbrenohl@br.ibm.com
Currently ehea ndo_get_stats can sleep in two places, in a hcall and in a GFP_KERNEL alloc, which is not correct. This patch creates a delayed workqueue that grabs the information each 1 sec from the hardware, and place it into the device structure, so that, .ndo_get_stats quickly returns the device structure statistics block. Signed-off-by: Breno Leitao <brenohl@br.ibm.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-22Merge branch 'master' of github.com:davem330/netDavid S. Miller
Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-09-15ibmveth: convert to SKB paged frag API.Ian Campbell
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Santiago Leon <santil@linux.vnet.ibm.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-27drivers/net/ethernet/*: Enabled vendor Kconfig optionsJeff Kirsher
Based on finds for Stephen Rothwell, where current defconfig's enable a ethernet driver and it is not compiled due to the newly added NET_VENDOR_* component of Kconfig. This patch enables all the "new" Kconfig options so that current defconfig's will continue to compile the expected drivers. In addition, by enabling all the new Kconfig options does not add any un-expected options. CC: Stephen Rothwll <sfc@canb.auug.org.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-18net: fix IBM EMAC driver after rename.Tony Breeds
In commit 9aa3283595451ca093500ff0977b106e1f465586 (ehea/ibm*: Move the IBM drivers) the IBM_NEW_EMAC* were renames to IBM_EMAC* The conversion was incomplete so that even if the driver was added to the .config it wasn't built, but there were no errors). In this commit we also update the various defconfigs that use EMAC to use the new Kconfig symbol, and explicitly add the NET_VENDOR_IBM guard. We do not explicitly select the Kconfig dependencies, as this would force EMAC on. Doing it in the defconfig allows more flexibility. Tested on a canyondlands board. Signed-off-by: Tony Breeds <tony@bakeyournoodle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11ehea/ibm*: Move the IBM driversJeff Kirsher
Move the IBM drivers into drivers/net/ethernet/ibm/ and make the necessary Kconfig and Makefile changes. - Renamed ibm_new_emac to emac - Cleaned up Makefile and Kconfig options which referred to IBM_NEW_EMAC to IBM_EMAC - ibmlana driver is a National Semiconductor SONIC driver so it was not moved CC: Christoph Raisch <raisch@de.ibm.com> CC: Santiago Leon <santil@linux.vnet.ibm.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: David Gibson <dwg@au1.ibm.com> CC: Kyle Lucke <klucke@us.ibm.com> CC: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>