summaryrefslogtreecommitdiffstats
path: root/drivers/net/bnx2x_link.h
AgeCommit message (Collapse)Author
2009-02-15bnx2x: VersionEilon Greenstein
And updating the year Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15bnx2x: Clean-upEilon Greenstein
Whitespaces, empty lines, 80 columns, indentations and removing redundant parenthesis Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15bnx2x: Pre emphasis configurationEilon Greenstein
Supporting non-default pre-emphasis settings for the internal and some external PHYs Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-02-15bnx2x: Supporting BCM8726 PHYEilon Greenstein
Also adding the ability to recognize the optic module and disable it if it is not authorized for safety reasons - since this feature might upset some users which are willing to take the risk, it is optional and can be disabled by setting an nvram bit (or a trivial driver patch to set this bit). This dual port PHY requires special handling if the ports are swapped. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-16bnx2x: Fix namespace collision with FLOW_CTRL_{TX,RX}David S. Miller
These are now defined in linux/mii.h and the bnx2x driver defines different values which are shared with hardware data structures. So add a "BNX2X_" prefix to these macro names. Based upon a report from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Spelling mistakesEilon Greenstein
Spelling mistakes Spelling has to L's in it... Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: 8073 PHY changesYaniv Rosner
8073 PHY changes The initial support we had for this PHY needs some serious changing. The major change is that this PHY should be initialized only when the first function is loaded and not for each function. The official SPI-ROM of this PHY was released and it requires some changes in the initialization code as well Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-13bnx2x: Pause settingsYaniv Rosner
Pause settings - 1G pause was not working due to missing write to the emac block (TX_MODE_FLOW_EN) - The flow control should use the negotiated result (after autoneg) so we should save both the requested autoneg and the result - The HW credits with flow control at 1G speed were not optimized and caused low throughput - It is recommended to turn off flow control if the MTU is bigger than 5000B due to internal buffers size Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-23bnx2x: Adding bnx2x_linkYaniv Rosner
This patch is int the new bnx2x_link files (C and H). The files are still not used in this patch, only in the next one so the patch will be small enough for the mailing list. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilong Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>