summaryrefslogtreecommitdiffstats
path: root/drivers/mmc
AgeCommit message (Collapse)Author
2020-10-24Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds
Pull ARM SoC platform updates from Olof Johansson: "SoC changes, a substantial part of this is cleanup of some of the older platforms that used to have a bunch of board files. In particular: - Remove non-DT i.MX platforms that haven't seen activity in years, it's time to remove them. - A bunch of cleanup and removal of platform data for TI/OMAP platforms, moving over to genpd for power/reset control (yay!) - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them closer to multiplatform support (not quite there yet, but getting close). There are a few other changes too, smaller fixlets, etc. For new platform support, the primary ones are: - New SoC: Hisilicon SD5203, ARM926EJ-S platform. - Cpufreq support for i.MX7ULP" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits) ARM: mstar: Select MStar intc ARM: stm32: Replace HTTP links with HTTPS ones ARM: debug: add UART early console support for SD5203 ARM: hisi: add support for SD5203 SoC ARM: omap3: enable off mode automatically clk: imx: imx35: Remove mx35_clocks_init() clk: imx: imx31: Remove mx31_clocks_init() clk: imx: imx27: Remove mx27_clocks_init() ARM: imx: Remove unused definitions ARM: imx35: Retrieve the IIM base address from devicetree ARM: imx3: Retrieve the AVIC base address from devicetree ARM: imx3: Retrieve the CCM base address from devicetree ARM: imx31: Retrieve the IIM base address from devicetree ARM: imx27: Retrieve the CCM base address from devicetree ARM: imx27: Retrieve the SYSCTRL base address from devicetree ARM: s3c64xx: bring back notes from removed debug-macro.S ARM: s3c24xx: fix Wunused-variable warning on !MMU ARM: samsung: fix PM debug build with DEBUG_LL but !MMU MAINTAINERS: mark linux-samsung-soc list non-moderated ARM: imx: Remove remnant board file support pieces ...
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-09mmc: sdhci_am654: Fix module autoloadFaiz Abbas
Add a MODULE_DEVICE_TABLE() entry so that the driver is autoloaded when built as a module. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20201008100129.13917-1-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-09Merge branch 'fixes' into nextUlf Hansson
2020-10-09mmc: core: don't set limits.discard_granularity as 0Coly Li
In mmc_queue_setup_discard() the mmc driver queue's discard_granularity might be set as 0 (when card->pref_erase > max_discard) while the mmc device still declares to support discard operation. This is buggy and triggered the following kernel warning message, WARNING: CPU: 0 PID: 135 at __blkdev_issue_discard+0x200/0x294 CPU: 0 PID: 135 Comm: f2fs_discard-17 Not tainted 5.9.0-rc6 #1 Hardware name: Google Kevin (DT) pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) pc : __blkdev_issue_discard+0x200/0x294 lr : __blkdev_issue_discard+0x54/0x294 sp : ffff800011dd3b10 x29: ffff800011dd3b10 x28: 0000000000000000 x27: ffff800011dd3cc4 x26: ffff800011dd3e18 x25: 000000000004e69b x24: 0000000000000c40 x23: ffff0000f1deaaf0 x22: ffff0000f2849200 x21: 00000000002734d8 x20: 0000000000000008 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000394 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 00000000000008b0 x9 : ffff800011dd3cb0 x8 : 000000000004e69b x7 : 0000000000000000 x6 : ffff0000f1926400 x5 : ffff0000f1940800 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 0000000000000008 x1 : 00000000002734d8 x0 : 0000000000000000 Call trace: __blkdev_issue_discard+0x200/0x294 __submit_discard_cmd+0x128/0x374 __issue_discard_cmd_orderly+0x188/0x244 __issue_discard_cmd+0x2e8/0x33c issue_discard_thread+0xe8/0x2f0 kthread+0x11c/0x120 ret_from_fork+0x10/0x1c ---[ end trace e4c8023d33dfe77a ]--- This patch fixes the issue by setting discard_granularity as SECTOR_SIZE instead of 0 when (card->pref_erase > max_discard) is true. Now no more complain from __blkdev_issue_discard() for the improper value of discard granularity. This issue is exposed after commit b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"), a "Fixes:" tag is also added for the commit to make sure people won't miss this patch after applying the change of __blkdev_issue_discard(). Fixes: e056a1b5b67b ("mmc: queue: let host controllers specify maximum discard timeout") Fixes: b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"). Reported-and-tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20201002013852.51968-1-colyli@suse.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-08mmc: renesas_sdhi: workaround a regression when reinserting SD cardsWolfram Sang
After the conversions of the reset routines, re-inserting SD cards didn't work anymore. Apply this temporary workaround to have working SD cards during the merge window. The issue will be fixed properly until the final release. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20201008092533.76588-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-07mmc: sdhci-pci-gli: Add CQHCI Support for GL9763EBen Chuang
Add CQHCI initialization and implement CQHCI operations for GL9763E. Use bit19 of the register (0x888) to decide whether to disable command queuing. If the bit is set, the command queuing will be disabled. Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20201005105509.11343-1-ben.chuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-10-05mmc: sdhci-acpi: AMDI0040: Set SDHCI_QUIRK2_PRESET_VALUE_BROKENRaul E Rangel
This change fixes HS400 tuning for devices with invalid presets. SDHCI presets are not currently used for eMMC HS/HS200/HS400, but are used for DDR52. The HS400 retuning sequence is: HS400->DDR52->HS->HS200->Perform Tuning->HS->HS400 This means that when HS400 tuning happens, we transition through DDR52 for a very brief period. This causes presets to be enabled unintentionally and stay enabled when transitioning back to HS200 or HS400. Some firmware has invalid presets, so we end up with driver strengths that can cause I/O problems. Fixes: 34597a3f60b1 ("mmc: sdhci-acpi: Add support for ACPI HID of AMD Controller with HS400") Signed-off-by: Raul E Rangel <rrangel@chromium.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200928154718.1.Icc21d4b2f354e83e26e57e270dc952f5fe0b0a40@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-28mmc: sdhci_am654: Enable tuning for SDR50Faiz Abbas
According to the SW tuning App note[1], tuning is required for all UHS speed modes. Tuning for SDR50 is not enabled in Capabilities by default so enable it from the CTL_CFG registers. [1] https://www.ti.com/lit/pdf/spract9 Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200923105206.7988-7-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-28mmc: sdhci_am654: Add support for software tuningFaiz Abbas
With the new SW tuning App note[1], a custom tuning algorithm is required for eMMC HS200, HS400 and SD card UHS modes. The algorithm involves running through the 32 possible input tap delay values and sending the appropriate tuning command (CMD19/21) for each of them to get a fail or pass result for each of the values. Typically, the range will have a small contiguous failing window. Considering the tuning range as a circular buffer, the algorithm then sets a final tuned value directly opposite to the failing window. [1] https://www.ti.com/lit/pdf/spract9 Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20200923105206.7988-6-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-28mmc: sdhci_am654: Add support for input tap delayFaiz Abbas
DLL need only be enabled for speed modes and clock frequencies at or above 50 MHz. For speed modes that don't enable the DLL, we need to configure a static input delay value. This involves reading an optional itap-del-sel-* value from the device tree and configuring it for the appropriate speed mode. With this addition, make sure that DLL is always switched off at the beginning of the set_clock() call to simplify configuration. This also removes the need for the dll_on member in struct sdhci_am654_data. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200923105206.7988-5-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-28mmc: sdhci_am654: Fix hard coded otap delay array sizeFaiz Abbas
Change hard coded array size value to depend on struct timing_data array size. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200923105206.7988-4-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-28mmc: sdhci-of-esdhc: fix reference clock source selectionYangbo Lu
The bit ESDHC_PERIPHERAL_CLK_SEL to select using peripheral clock or platform clock is not able to be reset by SDHCI_RESET_ALL. So driver needs to initialize it as 1 or 0 once, to override the different value which may be configured in bootloader. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Link: https://lore.kernel.org/r/20200927082304.9232-1-yangbo.lu@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-28mmc: host: fix depends for MMC_MESON_GX w/ COMPILE_TESTRandy Dunlap
Fix build errors for meson-gx-mmc.c when CONFIG_COMMON_CLK is not set/enabled. This can happen when COMPILE_TEST is set/enabled. ERROR: modpost: "clk_divider_ops" [drivers/mmc/host/meson-gx-mmc.ko] undefined! ERROR: modpost: "devm_clk_register" [drivers/mmc/host/meson-gx-mmc.ko] undefined! ERROR: modpost: "clk_mux_ops" [drivers/mmc/host/meson-gx-mmc.ko] undefined! ERROR: modpost: "__clk_get_name" [drivers/mmc/host/meson-gx-mmc.ko] undefined! Fixes: 54d8454436a2 ("mmc: host: Enable compile testing of multiple drivers") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20200925164323.29843-1-rdunlap@infradead.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-28Merge branch 'fixes' into nextUlf Hansson
2020-09-28mmc: sdhci: Workaround broken command queuing on Intel GLK based IRBIS modelsHans de Goede
Commit bedf9fc01ff1 ("mmc: sdhci: Workaround broken command queuing on Intel GLK"), disabled command-queuing on Intel GLK based LENOVO models because of it being broken due to what is believed to be a bug in the BIOS. It seems that the BIOS of some IRBIS models, including the IRBIS NB111 model has the same issue, so disable command queuing there too. Fixes: bedf9fc01ff1 ("mmc: sdhci: Workaround broken command queuing on Intel GLK") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209397 Reported-and-tested-by: RussianNeuroMancer <russianneuromancer@ya.ru> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200927104821.5676-1-hdegoede@redhat.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-25block: add a bdev_is_partition helperChristoph Hellwig
Add a littler helper to make the somewhat arcane bd_contains checks a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25mmc: sdhci-s3c: hide forward declaration of of_device_id behind CONFIG_OFKrzysztof Kozlowski
The struct of_device_id is not defined with !CONFIG_OF so its forward declaration should be hidden to as well. This should address clang compile warning: drivers/mmc/host/sdhci-s3c.c:464:34: warning: tentative array definition assumed to have one element Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200925072532.10272-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-25mmc: sdhci: fix indentation mistakesKrzysztof Kozlowski
Fix inconsistent indenting, reported by Smatch: drivers/mmc/host/sdhci-esdhc-imx.c:1380 sdhci_esdhc_imx_hwinit() warn: inconsistent indenting drivers/mmc/host/sdhci-sprd.c:390 sdhci_sprd_request_done() warn: inconsistent indenting Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200923153739.30327-2-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-25mmc: moxart: remove unneeded check for drvdataKrzysztof Kozlowski
The 'struct mmc_host *mmc' comes from drvdata set at the end of probe, so it cannot be NULL. The code already dereferences it few lines before the check with mmc_priv(). This also fixes smatch warning: drivers/mmc/host/moxart-mmc.c:692 moxart_remove() warn: variable dereferenced before check 'mmc' (see line 688) Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200923153739.30327-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-25mmc: renesas_sdhi: drop local flag for tuningWolfram Sang
The MMC core has now a generic check if some tuning is in progress. Its protected area is a bit larger than the custom one in this driver but we concluded that this works equally well for the intended case. So, drop the local flag and switch to the generic one. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200922172253.4458-1-wsa@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-25mmc: rtsx_usb_sdmmc: simplify the return expression of sd_change_phase()Qinglang Miao
Simplify the return expression. Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20200921131042.92340-1-miaoqinglang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-25mmc: core: document mmc_hw_reset()Wolfram Sang
Add documentation for mmc_hw_reset to make sure the intended use case is clear. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200918215446.65654-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-24bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flagChristoph Hellwig
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the backing_dev_info shared between the block drivers and the writeback code. To help untangling the dependency replace it with a queue flag and a superblock flag derived from it. This also helps with the case of e.g. a file system requiring stable writes due to its own checksumming, but not forcing it on other users of the block device like the swap code. One downside is that we an't support the stable_pages_required bdi attribute in sysfs anymore. It is replaced with a queue attribute which also is writable for easier testing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-24mmc: mediatek: Drop pointer to mmc_host from msdc_hostAmey Narkhede
The MediaTek MMC driver uses pointer to get from private msdc_host structure to the generic mmc_host structure. However mmc_host always precedes msdc_host in memory so compute its address with a subtraction (which is cheaper than a dereference) using mmc_from_priv() and drop the extra pointer. Signed-off-by: Amey Narkhede <ameynarkhede03@gmail.com> Link: https://lore.kernel.org/r/20200917192624.548720-1-ameynarkhede03@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-14mmc: core: clear 'doing_init_tune' also after failuresWolfram Sang
Reorganize the code, so that the flag is always cleared independently of a good or bad case. Fixes: 97a7d87e96b0 ("mmc: core: add a 'doing_init_tune' flag and a 'mmc_doing_tune' helper") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200914112845.21855-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-14Merge branch 'fixes' into nextUlf Hansson
2020-09-14mmc: mmc_spi: Fix mmc_spi_dma_alloc() return type for !HAS_DMAGeert Uytterhoeven
If CONFIG_NO_DMA=y (e.g. Sun-3 allmodconfig): drivers/mmc/host/mmc_spi.c:1323:15: warning: return type defaults to ‘int’ [-Wreturn-type] static inline mmc_spi_dma_alloc(struct mmc_spi_host *host) { return 0; } ^~~~~~~~~~~~~~~~~ Fix this by adding the missing return type. Fixes: a395acf0f6dc6409 ("mmc: mmc_spi: Allow the driver to be built when CONFIG_HAS_DMA is unset") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20200914094243.3912-1-geert@linux-m68k.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-13Merge tag 'samsung-soc-s3c-5.10' of ↵Olof Johansson
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc Samsung S3C24xx and S3C64xx machine code cleanup for v5.10 Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it also touches files shared with S5Pv210 and Exynos. This is mostly Arnd Bergmann work which Krzysztof Kozlowski took over, rebased and polished. The goal is to cleanup, merge and finally make the Samsung S3C24xx and S3C64xx architectures multiplatform. The multiplatform did not happen yet here - just cleaning up and merging into one arch/arm/mach-s3c directory. However this is step forward for multiplatform or at least to keep this code still maintainable. This pulls also branch with changes for Samsung SoC sound drivers from broonie/sound because the cleanups there were part of this series and all further patches depend on them. * tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits) ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup ARM: s3c: Cleanup from old plat-samsung include ARM: s3c: make headers local if possible ARM: s3c: move into a common directory ARM: s3c24xx: stop including mach/hardware.h from mach/io.h cpufreq: s3c24xx: move low-level clk reg access into platform code cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh ARM: s3c: remove cpufreq header dependencies cpufreq: s3c24xx: split out registers fbdev: s3c2410fb: remove mach header dependency ARM: s3c24xx: bast: avoid irq_desc array usage ARM: s3c24xx: spi: avoid hardcoding fiq number in driver ARM: s3c24xx: include mach/irqs.h where needed ARM: s3c24xx: move s3cmci pinctrl handling into board files ARM: s3c24xx: move iis pinctrl config into boards ARM: s3c24xx: move spi fiq handler into platform ARM: s3c: adc: move header to linux/soc/samsung ARM: s3c24xx: move irqchip driver back into platform ARM: s3c24xx: move regs-spi.h into spi driver ARM: s3c64xx: remove mach/hardware.h ... Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
2020-09-11mmc: sdhci-msm: Unconditionally call dev_pm_opp_of_remove_table()Viresh Kumar
dev_pm_opp_of_remove_table() doesn't report any errors when it fails to find the OPP table with error -ENODEV (i.e. OPP table not present for the device). And we can call dev_pm_opp_of_remove_table() unconditionally here. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/890ae5601594fca5de104695a682f4b6efbc631b.1599660554.git.viresh.kumar@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-09mmc: renesas_sdhi: support manual calibrationWolfram Sang
Some R-Car Gen3 SoCs need some manual correction of timing parameters after the automatic tuning has finished but before next CMD13 is completed. This patch implements that by this state machine: - introducing a per-SoC correction table if needed - iff such a table exists, the 'fixup_request' callback is populated during probe - iff such a table exists, a runtime flag ('needs_adjust_hs400') is set when HS400 tuning was completed - the callback will check the runtime flag and enable the corrected manual mode if the flag is set and CMD13 is encountered - at the end of the enablement the runtime flag is cleared - iff the configuration flag is set, the manual mode will be disabled when HS400 gets downgraded There also some helper functions added to access the TMPPORT registers. The actual correction table is SoC and instance(!) specific and is added to the quirks struct. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200902081812.1591-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-09mmc: tmio: add generic hook to fixup after a completed requestWolfram Sang
Sadly, due to HW bugs, we need a callback to work around issues just before completing the request. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200902081812.1591-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-08mmc: Drop COMPILE_TEST Kconfig option for MMC_S3CUlf Hansson
MMC_S3C isn't ready yet to be built with COMPILE_TEST, hence drop it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200908140242.743234-1-ulf.hansson@linaro.org Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that are newer than 5.4Douglas Anderson
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to have been added after kernel 5.4. Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Lars Povlsen <lars.povlsen@microchip.com> Acked-by: Angelo Dureghello <angelo.dureghello@timesys.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20200903162412.6.Ib121debfb18e5f923a3cd38fe9c36aa086c650c5@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v5.4Douglas Anderson
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v5.4 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200903162412.5.I2b630c4d40ff4ea61d5b30b8ccfe95890e257100@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.19Douglas Anderson
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.19 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200903162412.4.I84eb3e0a738635d524c90d1a688087bc295f7c32@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14Douglas Anderson
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.14 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # SDHI drivers Link: https://lore.kernel.org/r/20200903162412.3.Id1ff21470f08f427aedd0a6535dcd83ccc56b278@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.9Douglas Anderson
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.9 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200903162412.2.I226782b43191ce367fa3bc1c907c29f571890412@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4Douglas Anderson
This is like commit 3d3451124f3d ("mmc: sdhci-msm: Prefer asynchronous probe") but applied to a whole pile of drivers. This batch converts the drivers that appeared to be around in the v4.4 timeframe. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # SH_MMCIF Tested-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20200903162412.1.Id501e96fa63224f77bb86b2135a5e8324ffb9c43@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: host: Enable compile testing of multiple driversKrzysztof Kozlowski
Multiple MMC host controller driver can be compile tested as they do not depend on architecture specific headers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200907105254.31097-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: host: Drop unneeded MMC dependency in KconfigKrzysztof Kozlowski
All entries in Kconfig are already part of "if MMC", so there is no need for additional dependency on MMC. Suggested-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200904164315.24618-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: renesas_sdhi: Drop local dma_parmsRobin Murphy
Since commit 9495b7e92f71 ("driver core: platform: Initialize dma_parms for platform devices"), struct platform_device already provides a dma_parms structure, so we can save allocating another one. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/85e1fc97dbec3dea96102785a5e308ccb5e91cfe.1599167798.git.robin.murphy@arm.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: omap-hsmmc: remove redundant null checkXu Wang
Because clk_disable_unprepare already checked NULL clock parameter, so the additional checks are unnecessary, just remove them. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Link: https://lore.kernel.org/r/20200903084825.85616-1-vulab@iscas.ac.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07Merge branch 'fixes' into nextUlf Hansson
2020-09-07mmc: core: simplify an expressionWolfram Sang
We already have 'host' as a variable, so use it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200901150250.26236-5-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: renesas_sdhi: keep SCC clock active when tuningWolfram Sang
Tuning procedure switches to lower frequencies but that will turn the SCC off and accessing its register then will hang. So, check when we are tuning and keep the current setup of the external clock if we are doing so. Note that we still switch to the lower frequency because of the internal divider. We just make sure to not modify the external clock. This patch depends on a MMC core patch calling the downgrade function earlier. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200901150250.26236-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: core: add a 'doing_init_tune' flag and a 'mmc_doing_tune' helperWolfram Sang
Our driver needs to know when tuning is in progress. 'doing_retune' only covers re-tuning, not the initial tuning. Add another flag to detect the initial tuning state and add a helper which tells us if any kind of tuning is going on. Only implemented for MMC currently because that's where we need it. SD can be added later if it becomes necessary. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200901150250.26236-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: core: when downgrading HS400, callback into drivers earlierWolfram Sang
The driver specific downgrade function makes more sense if we run it before we set the timing to something lower, not after. Otherwise some non-HS400 communication has already happened. No need to convert users. There is only one currently which needs this change in a following patch. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200901150250.26236-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdhci-msm: Prefer asynchronous probeDouglas Anderson
Turning on initcall debug on one system showed this: initcall sdhci_msm_driver_init+0x0/0x28 returned 0 after 34782 usecs The lion's share of this time (~33 ms) was in mmc_power_up(). This shouldn't be terribly surprising since there are a few calls to delay based on "power_delay_ms" and the default delay there is 10 ms. Because we haven't specified that we'd prefer asynchronous probe for this driver then we'll wait for this driver to finish before we start probes for more drivers. While 33 ms doesn't sound like tons, every little bit counts. There should be little problem with turning on asynchronous probe for this driver. It's already possible that previous drivers may have turned on asynchronous probe so we might already have other things (that probed before us) probing at the same time we are anyway. This driver isn't really providing resources (clocks, regulators, etc) that other drivers need to probe and even if it was they should be handling -EPROBE_DEFER. Let's turn this on and get a bit of boot speed back. Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200902164303.1.I5e598a25222b4534c0083b61dbfa4e0e76f66171@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: s3cmci: Drop unused variables in dbg_dumpregsKrzysztof Kozlowski
The 'imask' and 'bsize' are not used in dbg_dumpregs: drivers/mmc/host/s3cmci.c:149:36: warning: variable 'imask' set but not used [-Wunused-but-set-variable] drivers/mmc/host/s3cmci.c:148:63: warning: variable 'bsize' set but not used [-Wunused-but-set-variable] Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200903054333.18331-1-krzk@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-11 18:03:57 +0000