summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host
AgeCommit message (Collapse)Author
2020-08-05Merge tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add a new host cap bit and a corresponding DT property, to support power cycling of the card by FW at system suspend/resume. - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo cards - Convert the mmc-pwrseq DT bindings to the json-schema - Always allow the card detect uevent to be consumed by userspace MMC host controllers: - Convert a few DT bindings to the json-schema - mtk-sd: - Add support for command queue through cqhci - Add support for the MT6779 variant - renesas_sdhi_internal_dmac: - Fix dma unmapping in the error path - sdhci_am654: - Add support for the AM65x PG2.0 variant - Extend support for phys/clocks - sdhci-cadence: - Drop incorrect HW tuning for SD mode - sdhci-msm: - Add support for interconnect bandwidth scaling - Enable internal voltage control - Enable low power state for pinctrls - sdhci-of-at91: - Ludovic Desroches handovers maintenance to Eugen Hristev - sdhci-pci-gli: - Improve clock handling for GL975x - sdhci-pci-o2micro: - Add HW tuning for SDR104 mode - Fix support for O2 host controller Seabird1" * tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits) mmc: mediatek: make function msdc_cqe_disable() static MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev dt-bindings: mmc: mediatek: Add document for mt6779 mmc: mediatek: command queue support mmc: mediatek: refine msdc timeout api mmc: mediatek: add MT6779 MMC driver support mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1 mmc: via-sdmmc: use generic power management memstick: jmb38x_ms: use generic power management mmc: sdhci-cadence: do not use hardware tuning for SD mode mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x mmc: cqhci: Fix a print format for the task descriptor mmc: sdhci-of-arasan: fix timings allocation code mmc: sdhci: Fix a potential uninitialized variable dt-bindings: mmc: renesas,sdhi: convert to YAML dt-bindings: mmc: convert arasan sdhci bindings to yaml mmc: sdhci: Fix potential null pointer access while accessing vqmmc mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND dt-bindings: mmc: Add full-pwr-cycle-in-suspend property ...
2020-08-05Merge tag 'char-misc-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char and misc and other driver subsystem patches for 5.9-rc1. Lots of new driver submissions in here, and cleanups and features for existing drivers. Highlights are: - habanalabs driver updates - coresight driver updates - nvmem driver updates - huge number of "W=1" build warning cleanups from Lee Jones - dyndbg updates - virtbox driver fixes and updates - soundwire driver updates - mei driver updates - phy driver updates - fpga driver updates - lots of smaller individual misc/char driver cleanups and fixes Full details are in the shortlog. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits) habanalabs: remove unused but set variable 'ctx_asid' nvmem: qcom-spmi-sdam: Enable multiple devices dt-bindings: nvmem: SID: add binding for A100's SID controller nvmem: update Kconfig description nvmem: qfprom: Add fuse blowing support dt-bindings: nvmem: Add properties needed for blowing fuses dt-bindings: nvmem: qfprom: Convert to yaml nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances nvmem: core: add support to auto devid nvmem: core: Add nvmem_cell_read_u8() nvmem: core: Grammar fixes for help text nvmem: sc27xx: add sc2730 efuse support nvmem: Enforce nvmem stride in the sysfs interface MAINTAINERS: Add git tree for NVMEM FRAMEWORK nvmem: sprd: Fix return value of sprd_efuse_probe() drivers: android: Fix the SPDX comment style drivers: android: Fix a variable declaration coding style issue drivers: android: Remove braces for a single statement if-else block drivers: android: Remove the use of else after return drivers: android: Fix a variable declaration coding style issue ...
2020-08-05mmc: mediatek: make function msdc_cqe_disable() staticWei Yongjun
The sparse tool complains as follows: drivers/mmc/host/mtk-sd.c:2269:6: warning: symbol 'msdc_cqe_disable' was not declared. Should it be static? This function is not used outside of mtk-sd.c, so this commit marks it static. Fixes: 88bd652b3c74 ("mmc: mediatek: command queue support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> Link: https://lore.kernel.org/r/20200727171129.2945-1-weiyongjun1@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-08-04Merge tag 'uninit-macro-v5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull uninitialized_var() macro removal from Kees Cook: "This is long overdue, and has hidden too many bugs over the years. The series has several "by hand" fixes, and then a trivial treewide replacement. - Clean up non-trivial uses of uninitialized_var() - Update documentation and checkpatch for uninitialized_var() removal - Treewide removal of uninitialized_var()" * tag 'uninit-macro-v5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: compiler: Remove uninitialized_var() macro treewide: Remove uninitialized_var() usage checkpatch: Remove awareness of uninitialized_var() macro mm/debug_vm_pgtable: Remove uninitialized_var() usage f2fs: Eliminate usage of uninitialized_var() macro media: sur40: Remove uninitialized_var() usage KVM: PPC: Book3S PR: Remove uninitialized_var() usage clk: spear: Remove uninitialized_var() usage clk: st: Remove uninitialized_var() usage spi: davinci: Remove uninitialized_var() usage ide: Remove uninitialized_var() usage rtlwifi: rtl8192cu: Remove uninitialized_var() usage b43: Remove uninitialized_var() usage drbd: Remove uninitialized_var() usage x86/mm/numa: Remove uninitialized_var() usage docs: deprecated.rst: Add uninitialized_var()
2020-07-27mmc: jz4740: Use pm_ptr() macroPaul Cercueil
Use the newly introduced pm_ptr() macro to simplify the code. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27Merge 5.8-rc7 into char-misc-nextGreg Kroah-Hartman
This should resolve the merge/build issues reported when trying to create linux-next. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-24mmc: mediatek: command queue supportChun-Hung Wu
Support command queue for mt6779 platform. a. Add msdc_set_busy_timeout() to calculate emmc write timeout. b. Connect mtk msdc driver to cqhci driver through host->cq_host->ops = &msdc_cmdq_ops; c. msdc_cmdq_irq() will link up with cqchi_irq(). Besides, it provides more irq error messages like RSPCRCERR/CMDTO/DATACRCERR/DATTMO. d. Select kernel config MMC_CQHCI for MMC_MTK Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> Acked-by: Yong Mao <yong.mao@mediatek.com> Link: https://lore.kernel.org/r/1595205759-5825-4-git-send-email-chun-hung.wu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: mediatek: refine msdc timeout apiChun-Hung Wu
Extract msdc timeout api common part to have better code architecture and avoid redundant code. Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/1595205759-5825-3-git-send-email-chun-hung.wu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: mediatek: add MT6779 MMC driver supportChun-Hung Wu
Add new code to support MT6779 mmc driver. Signed-off-by: Chun-Hung Wu <chun-hung.wu@mediatek.com> Link: https://lore.kernel.org/r/1595205759-5825-2-git-send-email-chun-hung.wu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 modeshirley her
Add HW tuning support for SD host controller in SDR104 mode Signed-off-by: Shirley Her <shirley.her@bayhubtech.com> Link: https://lore.kernel.org/r/20200721012700.8564-1-shirley.her@bayhubtech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1shirley her
To fix support for the O2 host controller Seabird1, set the quirk SDHCI_QUIRK2_PRESET_VALUE_BROKEN and the capability bit MMC_CAP2_NO_SDIO. Moreover, assign the ->get_cd() callback. Signed-off-by: Shirley Her <shirley.her@bayhubtech.com> Link: https://lore.kernel.org/r/20200721011733.8416-1-shirley.her@bayhubtech.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: via-sdmmc: use generic power managementVaibhav Gupta
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. This driver makes use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_enable_wake() and pci_set_power_state() and to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use dev_get_drvdata() to get drv data. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Link: https://lore.kernel.org/r/20200720142603.577323-1-vaibhavgupta40@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: sdhci-cadence: do not use hardware tuning for SD modeMasahiro Yamada
As commit ef6b75671b5f ("mmc: sdhci-cadence: send tune request twice to work around errata") stated, this IP has an errata. This commit applies the second workaround for the SD mode. Due to the errata, it is not possible to use the hardware tuning provided by SDHCI_HOST_CONTROL2. Use the software-controlled tuning like the eMMC mode. Set sdhci_host_ops::platform_execute_tuning instead of overriding mmc_host_ops::execute_tuning. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Link: https://lore.kernel.org/r/20200720061141.172944-1-yamada.masahiro@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975xBen Chuang
Set SDR104's clock to 205MHz and enable SSC for GL9750 and GL9755 Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw> Link: https://lore.kernel.org/r/20200717033350.13006-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: cqhci: Fix a print format for the task descriptorBen Chuang
The format string of the task descriptor should be "%016llx". Signed-off-by: Ben Chuang <benchuanggli@gmail.com> Link: https://lore.kernel.org/r/20200715073344.8965-1-benchuanggli@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: sdhci-of-arasan: fix timings allocation codeManish Narani
The initial code that was adding delays was doing a cast over undefined memory. This meant that the delays would be all gibberish. This change, allocates all delays on the stack, and assigns them from the ZynqMP & Versal macros/phase-list. And then finally copies them over the common iclk_phase & oclk_phase variables. Signed-off-by: Manish Narani <manish.narani@xilinx.com> Link: https://lore.kernel.org/r/1594753953-62980-1-git-send-email-manish.narani@xilinx.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-24mmc: sdhci: Fix a potential uninitialized variableDan Carpenter
Smatch complains that "ret" can be used without being initialized. drivers/mmc/host/sdhci.c 4383 if (!IS_ERR(mmc->supply.vqmmc)) { 4384 if (enable_vqmmc) { ^^^^^^^^^^^^ 4385 ret = regulator_enable(mmc->supply.vqmmc); ^^^^^ 4386 host->sdhci_core_to_disable_vqmmc = !ret; 4387 } "ret" is only initialized when "enable_vqmmc" is true. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200714141410.GB314989@mwanda Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-20Merge v5.8-rc6 into char-misc-nextGreg Kroah-Hartman
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-07-13Merge branch 'fixes' into nextUlf Hansson
2020-07-13mmc: sdhci: Fix potential null pointer access while accessing vqmmcVeerabhadrarao Badiganti
Don't access vqmmc regulator handler, if it's already invalidated. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1594300408-17658-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Set IO pins in low power state during suspendVeerabhadrarao Badiganti
Configure SDHC IO pins with low power configuration when the driver is in suspend state. Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1594213888-2780-2-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-iproc: Do not define 'struct acpi_device_id' when !CONFIG_ACPILee Jones
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, 'struct sdhci_iproc_acpi_ids' becomes defined but unused. Fixes the following W=1 kernel build warning: mmc/host/sdhci-iproc.c:297:36: warning: ‘sdhci_iproc_acpi_ids’ defined but not used [-Wunused-const-variable=] Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ray Jui <rjui@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: bcm-kernel-feedback-list@broadcom.com Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Scott Branden <scott.branden@broadcom.com> Link: https://lore.kernel.org/r/20200707064701.GC3500@dell Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: dw_mmc-exynos: remove redundant initialization of variable 'found'Colin Ian King
The variable 'found' is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200706163031.503431-1-colin.king@canonical.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: cqhci: Demote faux kerneldoc header down to basic comment blockLee Jones
cqhci_host_alloc_tdl()'s function header is the only one in kerneldoc format. Which seems odd as it's not part of an external API and isn't referenced anywhere else. Seeing as there has also been no attempt to describe the expected function arguments either, we're going to assume that this is not actually a bona fide kerneldoc use-case. Fixes the following W=1 kernel build warning: drivers/mmc/host/cqhci.c:163: warning: Function parameter or member 'cq_host' not described in 'cqhci_host_alloc_tdl' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ritesh Harjani <riteshh@codeaurora.org> Cc: Asutosh Das <asutoshd@codeaurora.org> Cc: Venkat Gopalakrishnan <venkatg@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200701124702.908713-15-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Demote faux kerneldoc header down to basic comment blockLee Jones
__sdhci_msm_set_clock()'s function header is the only one in kerneldoc format. Which seems odd as it's not part of an external API and isn't referenced anywhere else. Seeing as there has also been no attempt to describe the expected function arguments either, we're going to assume that this is not actually a bona fide kerneldoc use-case. Fixes the following W=1 kernel build warnings: drivers/mmc/host/sdhci-msm.c:1595: warning: Function parameter or member 'host' not described in '__sdhci_msm_set_clock' drivers/mmc/host/sdhci-msm.c:1595: warning: Function parameter or member 'clock' not described in '__sdhci_msm_set_clock' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-14-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-of-arasan: Correct formatting and provide missing function arg(s)Lee Jones
Kerneldoc expects arg descriptions to be in the format '@.*: '. If either the '@' or the ':' is omitted then kerneldoc complains that the description is missing. Add the missing ':' here and provide a new description for 'value'. Fixes the following kernel build W=1 warnings: drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'host' not described in 'sdhci_arasan_update_support64b' drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'value' not described in 'sdhci_arasan_update_support64b' drivers/mmc/host/sdhci-msm.c:1887:6: warning: no previous prototype for ‘sdhci_msm_dump_vendor_regs’ [-Wmissing-prototypes] Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Xiaobo Xie <X.Xie@freescale.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Soeren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-12-lee.jones@linaro.org Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: rtsx_usb_sdmmc: Remove set but unused variable 'err'Lee Jones
Seeing as sd_wait_data_idle() returns void and only a very specific read value is checked, there doesn't seem to be a good reason to check the return value of rtsx_pci_read_register(). So remove the assignment and definition of 'err'. Squashes the following W=1 kernel build warning: drivers/mmc/host/rtsx_usb_sdmmc.c: In function ‘sd_wait_data_idle’: drivers/mmc/host/rtsx_usb_sdmmc.c:657:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 657 | int err, i; | ^~~ Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-11-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: rtsx_pci_sdmmc: Remove set but unused variable 'err'Lee Jones
Seeing as sd_wait_data_idle() returns void and only a very specific read value is checked, there doesn't seem to be a good reason to check the return value of rtsx_pci_read_register(). So remove the assignment and definition of 'err'. Squashes the following W=1 kernel build warning: drivers/mmc/host/rtsx_pci_sdmmc.c: In function ‘sd_wait_data_idle’: drivers/mmc/host/rtsx_pci_sdmmc.c:678:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 678 | int err, i; | ^~~ Cc: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-10-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: dw_mmc-exynos: Add kerneldoc descriptions of for 'dev' argsLee Jones
Provide missing documentation for dw_mci_exynos_suspend_noirq() and dw_mci_exynos_resume_noirq() function headers. Fixes the following W=1 kernel build warnings: drivers/mmc/host/dw_mmc-exynos.c:184: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_suspend_noirq' drivers/mmc/host/dw_mmc-exynos.c:200: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_resume_noirq' Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20200701124702.908713-9-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: atmel-mci: Provide 2 new and correct 1 existing property descriptionLee Jones
'sg_len' and 'dma_conf' are missing correct kerneldoc documentation and 'buf_phys_addr' was misspelled. Correcting these issues fixes the following W=1 kernel build issues: mmc/host/atmel-mci.c:352: warning: Function parameter or member 'sg_len' not described in 'atmel_mci' mmc/host/atmel-mci.c:352: warning: Function parameter or member 'buf_phys_addr' not described in 'atmel_mci' mmc/host/atmel-mci.c:352: warning: Function parameter or member 'dma_conf' not described in 'atmel_mci' Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-7-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: mtk-sd: Demote msdc_recheck_sdio_irq() function headerLee Jones
No other function in the file is documented using kerneldoc and no effort to document the function arguments have been made. It's a bit of an oddity to say the least. Let's downgrade it from kerneldoc to a standard comment block instead. Fixes the following W=1 kernel build warning: drivers/mmc/host/mtk-sd.c:1030: warning: Function parameter or member 'host' not described in 'msdc_recheck_sdio_irq' Cc: Chaotian Jing <chaotian.jing@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200701124702.908713-6-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-s3c: Provide documentation for missing struct propertiesLee Jones
Describe properties; ext_cd_irq, clk_rates and no_divider (x2). Squashes the following W=1 kernel build warnings: drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'ext_cd_irq' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'clk_rates' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:139: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c_drv_data' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20200701124702.908713-5-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Make function sdhci_msm_dump_vendor_regs() staticHulk Robot
Fix sparse build warning: drivers/mmc/host/sdhci-msm.c:1888:6: warning: symbol 'sdhci_msm_dump_vendor_regs' was not declared. Should it be static? Signed-off-by: Hulk Robot <hulkci@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200702020347.77214-1-weiyongjun1@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: renesas_sdhi_internal_dmac: Fix dma unmapping in error casesYoshihiro Shimoda
If this controller doesn't issue interrupt for response of command, this driver lacks to call dma_unmap_sg(). So, fix the issue by using end() of struct tmio_mmc_dma_ops. Reported-by: Takeshi Saito <takeshi.saito.xv@renesas.com> Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-4-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: renesas_sdhi_internal_dmac: clean up the code for dma completeYoshihiro Shimoda
To add end() operation in the future, clean the code of renesas_sdhi_internal_dmac_complete_tasklet_fn(). No behavior change. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: tmio: core: Add end operation into tmio_mmc_dma_opsYoshihiro Shimoda
Related drivers like renesas_sdhi_internal_dmac are possible to lack dma unmaping in error cases (for example response timeout). Since tmio_mmc_finish_request() will be always called in any case, to fix the issue, add end operation into struct tmio_mmc_dma_ops and call the operation in tmio_mmc_finish_request() to call dma_ummap API by the related drivers correctly. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Use internal voltage controlVeerabhadrarao Badiganti
On qcom SD host controllers voltage switching be done after the HW is ready for it. The HW informs its readiness through power irq. The voltage switching should happen only then. Use the internal voltage switching and then control the voltage switching using power irq. IO-bus supply of eMMC would be kept always-on. So set the load for this supply to configure it in LPM when eMMC is suspend state and in HPM when eMMC is active. Co-developed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Co-developed-by: Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org> Co-developed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1592919288-1020-4-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci: Allow platform controlled voltage switchingVijay Viswanath
If vendor platform drivers are controlling whole logic of voltage switching, then sdhci driver no need control vqmmc regulator. So skip enabling/disable vqmmc from SDHC driver. Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1592919288-1020-2-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-acpi: For amd device set driver type as MMC_SET_DRIVER_TYPE_AAkshu Agrawal
HS400/HS200/eMMC HS doesn't have Preset Value register. Hence, sdhci_set_ios function overrides the value set by fmw to SDHCI_CTRL_DRV_TYPE_B. This patch sets drv_type to MMC_SET_DRIVER_TYPE_A so that host_control2 register gets updated with the required strength value. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200623133347.4598-1-akshu.agrawal@amd.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-esdhc-imx: dump internal IC debug status during errorHaibo Chen
USDHC of i.MX has internal IC debug register, which record the IC logical status. So dump these logical status in error condition, this can help analyzing issue. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1592985830-13038-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Add support for clkbuf_sel propertyFaiz Abbas
Add support for writing new clkbuf_sel property for the J721e 4 bit IP. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-7-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Update delay chain configurationFaiz Abbas
For speed modes where DLL is not enabled write to TXDLYCLK to enable transmitter delay chain mode. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-6-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Fix conditions for enabling dllFaiz Abbas
The clock > CLOCK_TOO_SLOW_HZ condition gating phy configuration is only required because dll should not be enabled at too low a clock frequency or too low timing. Make sure that this condition only gates dll enablement. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-5-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Add Support for SR2.0Faiz Abbas
Add Support for AM65x PG2.0. Use the SoC bus framework to fixup the driver data and skip do DLL calibration if the revision is 1.0 Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-4-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Add flag for PHY calibrationFaiz Abbas
Not all controllers need calibration for the PHY DLL. Add a DLL_CALIB flag to indicate the same. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-3-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sh_mmcif: Use "kHz" for kilohertzGeert Uytterhoeven
"K" stands for "kelvin". While at it, make the spacing before units consistent. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200618080321.16678-1-geert+renesas@glider.be Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Fix spelling mistakeFlavio Suligoi
Fix typo: "trigered" --> "triggered" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200617151938.30217-1-f.suligoi@asem.it Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: mmci: add sdio datactrl mask for sdmmc revisionsLudovic Barre
This patch adds datactrl_mask_sdio for sdmmc revisions. sdmmc revisions used same bit of previous ST variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200611132839.4515-1-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-of-arasan: Add missed checks for devm_clk_register()Chuhong Yuan
These functions do not check the return value of devm_clk_register(): - sdhci_arasan_register_sdcardclk() - sdhci_arasan_register_sampleclk() Therefore, add the missed checks to fix them. Fixes: c390f2110adf1 ("mmc: sdhci-of-arasan: Add ability to export card clock") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200608162226.3259186-1-hslester96@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-09 13:19:41 +0000