summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/mmci.c
AgeCommit message (Collapse)Author
2013-05-23ARM: 7726/1: mmc: mmci: Add card_busy function to improve UHS card supportUlf Hansson
To verify a signal voltage switch at initialization of UHS cards the .card_busy callback is used. For some of the ST-variants, card busy detection on the DAT0 pin is supported. We extend the variant struct with a busy_detect flag to indicate support for it. A corresponding busy detect function, which polls the busy status bit, is then set to the .card_busy callback. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7725/1: mmc: mmci: Cache MMCIDATACTRL registerUlf Hansson
Add a cache variable in the host struct that reflects the current data in the MMCIDATACTRL register. This patch will not introduce any functional change but instead provide an easy option to keep specific bits in the register between each data transfer. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7724/1: mmc: mmci: Support signal voltage switch for UHS cardsUlf Hansson
Add .start_signal_voltage_switch callback to be able to support UHS cards. The voltage switch requires the optional vqmmc regulator to exist since the actual voltage switch will be performed directly on it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7721/1: mmc: mmci: Fixup regulator handling for vqmmcUlf Hansson
We can not rely on regulator_is_enabled to decide whether to enable|disable the regulator. It would mean that the reference counter for it is not balanced properly. Instead keep track of our internal state by using a new flag in the host struct, so we can take correct decisions. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7713/1: mmc: mmci: Allow MMCI to request channels with information ↵Lee Jones
acquired from DT Currently, if DMA information isn't passed from platform data, then DMA will not be used. This patch allows DMA information obtained though Device Tree to be used as well. Cc: Chris Ball <cjb@laptop.org> Cc: linux-mmc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7719/1: mmc: mmci: Support for CMD23Ulf Hansson
Support added for transmission of CMD23 during multi block read or write. In order to activate this feature, MMC_CAP_CMD23 flag needs to be enabled in the capabilities field. Note that CMD23 support is mandatory to support features like reliable write, data tag, context ID, packed command. This patch is based upon a patch from Saugata Das. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7718/1: mmc: mmci: Set actual clock for debug purposeUlf Hansson
Update cclk to the acutal used value and copy it to the actual_clock variable in the mmc host for debug purpose. Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-23ARM: 7717/1: mmc: mmci: Use devm_clk_get APIUlf Hansson
Converting to devm_clk_get simplifies error handling in probe and we can remove other corresponding calls to clk_put. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-05-10ARM: 7714/1: mmc: mmci: Ensure return value of regulator_enable() is checkedLee Jones
This patch suppresses the warning below: drivers/mmc/host/mmci.c: In function ‘mmci_set_ios’: drivers/mmc/host/mmci.c:1165:20: warning: ignoring return value of ‘regulator_enable’, declared with attribute warn_unused_result [-Wunused-result] Cc: Chris Ball <cjb@laptop.org> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-03-01mmc: mmci: Move ios_handler functionality into the driverLee Jones
There are currently two instances of the ios_handler being used. Both of which mearly toy with some regulator settings. Now there is a GPIO regulator API, we can use that instead, and lessen the per platform burden. By doing this, we also become more Device Tree compatible. Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-01-28ARM: 7630/1: mmc: mmci: Fixup and cleanup code for DMA handlingUlf Hansson
The cookie is now used to indicate if dma_unmap_sg shall be done in post_request. At DMA errors, the DMA job is immediately not only terminated but also unmapped. To indicate that this has been done the cookie is reset to zero. post_request will thus only do dma_umap_sg for requests which has a cookie not set to zero. Some corresponding duplicated code could then be removed and moreover some corrections at DMA errors for terminating the same DMA job twice has also been fixed. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Per Forlin <per.forlin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-28ARM: 7631/1: mmc: mmci: Add new VE MMCI variantPawel Moll
The Versatile Express IOFPGA as shipped on VECD 5.0 (bitfiles v108/208 and v116/216) contains a modified version of the PL180 MMCI, with PeriphID Configuration value changed to 0x2. This version adds an optional "hardware flow control" feature. When enabled MMC card clock will be automatically disabled when FIFO is about to over/underflow and re-enabled once the host retrieved some data. This makes the controller immune to over/underrun errors caused by big interrupt handling latencies. This patch adds relevant device variant in the driver. Signed-off-by: Pawel Moll <pawel.moll@arm.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-23ARM: 7623/1: mmc: mmci: Fixup clock gating when freq is 0 for ST-variantsUlf Hansson
In the ST Micro variant, the MMCICLOCK register must not be used to gate the clock. Instead use MMCIPOWER register and by clearing the PWR_ON bit to do this. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-23ARM: 7622/1: mmc: mmci: Gate the clock in runtime suspend to save powerUlf Hansson
The amba bus is already performing same actions but for the apb_pclk. So here we just make sure the clock to card is gated as well to save more power. At runtime resume we will thus restore the clock again. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-08ARM: 7620/1: mmc: mmci: Convert to use mmc_regulator_get_supplyUlf Hansson
By using the mmc_regulator_get_supply API we are able to do some cleanups of the regulator code. Additionally let the regulator API handle the error printing. Cc: Chris Ball <cjb@laptop.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-08ARM: 7618/1: mmc: mmci: Support MMC_PM_KEEP_POWERUlf Hansson
Add MMC_PM_KEEP_POWER to pm_caps so SDIO clients are able to use this option to prevent power off in suspend. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-01-08ARM: 7617/1: mmc: mmci: Support for DDR modeUlf Hansson
Add support for DDR mode which may be used for the ux500v2 variant. Corresponding capabilities to enable the DDR support must be set in the platform struct to enable the functionality. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-12-12Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM updates from Russell King: "Here's the updates for ARM for this merge window, which cover quite a variety of areas. There's a bunch of patch series from Will tackling various bugs like the PROT_NONE handling, ASID allocation, cluster boot protocol and ASID TLB tagging updates. We move to a build-time sorted exception table rather than doing the sorting at run-time, add support for the secure computing filter, and some updates to the perf code. We also have sorted out the placement of some headers, fixed some build warnings, fixed some hotplug problems with the per-cpu TWD code." * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (73 commits) ARM: 7594/1: Add .smp entry for REALVIEW_EB ARM: 7599/1: head: Remove boot-time HYP mode check for v5 and below ARM: 7598/1: net: bpf_jit_32: fix sp-relative load/stores offsets. ARM: 7595/1: syscall: rework ordering in syscall_trace_exit ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_rep ARM: 7597/1: net: bpf_jit_32: fix kzalloc gfp/size mismatch. ARM: 7593/1: nommu: do not enable DCACHE_WORD_ACCESS when !CONFIG_MMU ARM: 7592/1: nommu: prevent generation of kernel unaligned memory accesses ARM: 7591/1: nommu: Enable the strict alignment (CR_A) bit only if ARCH < v6 ARM: 7590/1: /proc/interrupts: limit the display of IPIs to online CPUs only ARM: 7587/1: implement optimized percpu variable access ARM: 7589/1: integrator: pass the lm resource to amba ARM: 7588/1: amba: create a resource parent registrator ARM: 7582/2: rename kvm_seq to vmalloc_seq so to avoid confusion with KVM ARM: 7585/1: kernel: fix nr_cpu_ids check in DT logical map init ARM: 7584/1: perf: fix link error when CONFIG_HW_PERF_EVENTS is not selected ARM: gic: use a private mapping for CPU target interfaces ARM: kernel: add logical mappings look-up ARM: kernel: add cpu logical map DT init in setup_arch ARM: kernel: add device tree init map function ...
2012-12-11ARM: 7596/1: mmci: replace readsl/writesl with ioread32_rep/iowrite32_repDavide Ciminaghi
Not all the architectures have readsl/writesl, use the more portable ioread32_rep/iowrite32_rep functions instead. Signed-off-by: Davide Ciminaghi <ciminaghi@gnudd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-11-28mmc: remove use of __devexitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28mmc: remove use of __devinitBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devinit is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-28mmc: remove use of __devexit_pBill Pemberton
CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer needed. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Chris Ball <cjb@laptop.org> Cc: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Venkatraman S <svenkatr@ti.com> Cc: Ian Molton <ian@mnementh.co.uk> Cc: Bruce Chang <brucechang@via.com.tw> Cc: Harald Welte <HaraldWelte@viatech.com> Cc: Pierre Ossman <pierre@ossman.eu> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-04ARM: 7562/2: MMCI: fetch pinctrl handle and set default stateLinus Walleij
This fetches the pinctrl resource for the MMCI driver, and if a "default" state is found, it is activated. Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-18ARM: 7552/1: mmc: mmci: Switching off HWFC for SDIO depends on MCLKUlf Hansson
For writes, HWFC shall be switched off when transfer size <= 8 bytes and when MCLK rate is above 50 MHz. For 50MHz and below it shall be switched off when transfer size < 8 bytes. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-18ARM: 7551/1: mmc: mmci: Fix incorrect handling of HW flow control for SDIOUlf Hansson
For data writes <= 8 bytes, HW flow control was disabled but never re-enabled when the transfer was completed. This meant that a following read request would give buffer overrun errors. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-10-03mmc: mmci: use clk_prepare_enable and clk_disable_unprepareJulia Lawall
clk_prepare_enable and clk_disable_unprepare combine clk_prepare and clk_enable, and clk_disable and clk_unprepare. They make the code more concise, and ensure that clk_unprepare is called when clk_enable fails. A simplified version of the semantic patch that introduces calls to these functions is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ - clk_prepare(e); - clk_enable(e); + clk_prepare_enable(e); @@ expression e; @@ - clk_disable(e); - clk_unprepare(e); + clk_disable_unprepare(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-06-17ARM: 7427/1: mmc: mmci: Defer probe() in case of yet uninitialized GPIOsRoland Stigge
If the GPIOs used by the MMCI driver are not registered yet when the driver is probe()d, they can't be used. This happens if the mmci driver is probed before the respective GPIO controller (e.g. on the LPC32xx EA3250 board, the PCA9532 GPIO controller would be initialized via DT after mmci). Therefore, we defer mmci in this case. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-17ARM: 7426/1: mmc: mmci: Remove wrong error handling of gpio 0Roland Stigge
Zero is a valid GPIO and shouldn't be handled as an error return code from of_get_named_gpio(). It was a leftover from old code before getting pdata->gpio_*() was modified. Signed-off-by: Roland Stigge <stigge@antcom.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-06-14ARM: 7422/1: mmc: mmci: Allocate platform memory during Device Tree bootLee Jones
When booting with Device Tree enabled, platform specific information is gathered by parsing the DT binary. Platform data is subsequently populated with the result. The memory required for this is not automatically allocated during Device Tree boot, so we'll do it here instead. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-05-25Merge tag 'mmc-merge-for-3.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC changes from Chris Ball - at91-mci: This driver will be replaced by atmel-mci in 3.7. - atmel-mci: Add support for old at91-mci hardware. - dw_mmc: Allow multiple controllers; this previously caused corruption. - imxmmc: Remove this driver, replaced by mxcmmc. - mmci: Add device tree support. - omap: Allow multiple controllers. - omap_hsmmc: Auto CMD12, DDR support. - tegra: Support SD 3.0 spec. Fix up the usual trivial conflicts in feature-removal-schedule.txt * tag 'mmc-merge-for-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (38 commits) mmc: at91-mci: this driver is now deprecated mmc: omap_hsmmc: pass IRQF_ONESHOT to request_threaded_irq mmc: block: Allow disabling 512B sector size emulation mmc: atmel-mci: add debug logs mmc: atmel-mci: add support for version lower than v2xx mmc: atmel-mci: change the state machine for compatibility with old IP mmc: atmel-mci: the r/w proof capability lack was not well managed mmc: dw_mmc: Fixed sdio interrupt mask bit setting bug mmc: omap: convert to module_platform_driver mmc: omap: make it behave well as a module mmc: omap: convert to per instance workqueue mmc: core: Remove dead code mmc: card: Avoid null pointer dereference mmc: core: Prevent eMMC VCC supply to be cut from late init mmc: dw_mmc: make multiple instances of dw_mci_card_workqueue mmc: queue: remove redundant memsets mmc: queue: rename mmc_request function mmc: core: skip card initialization if power class selection fails mmc: core: fix the signaling 1.8V for HS200 mmc: core: fix the decision of HS200/DDR card-type ...
2012-05-21Merge branches 'amba', 'devel-stable', 'fixes', 'mach-types', 'mmci', 'pci' ↵Russell King
and 'versatile' into for-linus
2012-05-08mmc: mmci: Fix compiler error when CONFIG_OF is not setLee Jones
error: implicit declaration of function 'mmci_dt_populate_generic_pdata' This is due to the '#if CONFIG_OF' guards placed around mmci_dt_populate_generic_pdata(), but not around the call to it. We repair this by inserting a stub which elegantly returns when CONFIG_OF is not set. Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-04mmc: mmci: Use correct GPIO binding for IRQ requestsLee Jones
Now there are irqdomains in place for Snowball, we can request GPIO IRQs directly by their binding. This replaces the previous method of hard-coding the hwirq using u32 values in the DT. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-04mmc: mmci: Enable Device Tree support for ux500 variantsLee Jones
Provide a means to collect attributes specific to ST-Ericsson's ux500 variant series. This patch registers itself as the AMBA driver to be called during the probe process. Once all attributes and ux500 specifics are are collected the normal mmci core probe is called. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-03AMBA: get rid of last two uses of NO_IRQRussell King
This gets rid of the last two users of NO_IRQ in AMBA primecell drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-25ARM: 7378/1: mmci: add support for the Nomadik MMCI variantLinus Walleij
The Nomadik variant is somewhere inbetween the U300 and the Ux500 variant, its actually expose the same primecell ID as the U300 but had different characteristics so it needs a small revision bump and hard-coding from the board/device tree. After this it works just fine. Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-29Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
Pull slave-dmaengine update from Vinod Koul: "This includes the cookie cleanup by Russell, the addition of context parameter for dmaengine APIs, more arm dmaengine driver cleanup by moving code to dmaengine, this time for imx by Javier and pl330 by Boojin along with the usual driver fixes." Fix up some fairly trivial conflicts with various other cleanups. * 'next' of git://git.infradead.org/users/vkoul/slave-dma: (67 commits) dmaengine: imx: fix the build failure on x86_64 dmaengine: i.MX: Fix merge of cookie branch. dmaengine: i.MX: Add support for interleaved transfers. dmaengine: imx-dma: use 'dev_dbg' and 'dev_warn' for messages. dmaengine: imx-dma: remove 'imx_dmav1_baseaddr' and 'dma_clk'. dmaengine: imx-dma: remove unused arg of imxdma_sg_next. dmaengine: imx-dma: remove internal structure. dmaengine: imx-dma: remove 'resbytes' field of 'internal' structure. dmaengine: imx-dma: remove 'in_use' field of 'internal' structure. dmaengine: imx-dma: remove sg member from internal structure. dmaengine: imx-dma: remove 'imxdma_setup_sg_hw' function. dmaengine: imx-dma: remove 'imxdma_config_channel_hw' function. dmaengine: imx-dma: remove 'imxdma_setup_mem2mem_hw' function. dmaengine: imx-dma: remove dma_mode member of internal structure. dmaengine: imx-dma: remove data member from internal structure. dmaengine: imx-dma: merge old dma-v1.c with imx-dma.c dmaengine: at_hdmac: add slave config operation dmaengine: add context parameter to prep_slave_sg and prep_dma_cyclic dmaengine/dma_slave: introduce inline wrappers dma: imx-sdma: Treat firmware messages as warnings instead of erros ...
2012-03-23Merge branch 'amba' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull #2 ARM updates from Russell King: "Further ARM AMBA primecell updates which aren't included directly in the previous commit. I wanted to keep these separate as they're touching stuff outside arch/arm/." * 'amba' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driver ARM: 7335/1: mach-u300: do away with MMC config files ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER register ARM: 7309/1: realview: fix unconnected interrupts on EB11MP ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packets ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA job ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspend ARM: 7221/1: mmc: mmci: Change from using legacy suspend ARM: 7219/1: mmc: mmci: Change vdd_handler to a generic ios_handler ARM: 7218/1: mmc: mmci: Provide option to configure bus signal direction ARM: 7217/1: mmc: mmci: Put power register deviations in variant data ARM: 7216/1: mmc: mmci: Do not release spinlock in request_end ARM: 7215/1: mmc: mmci: Increase max_segs from 16 to 128
2012-03-23Merge branch 'for-armsoc' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull #1 ARM updates from Russell King: "This one covers stuff which Arnd is waiting for me to push, as this is shared between both our trees and probably other trees elsewhere. Essentially, this contains: - AMBA primecell device initializer updates - mostly shrinking the size of the device declarations in platform code to something more reasonable. - Getting rid of the NO_IRQ crap from AMBA primecell stuff. - Nicolas' idle cleanups. This in combination with the restart cleanups from the last merge window results in a great many mach/system.h files being deleted." Yay: ~80 files, ~2000 lines deleted. * 'for-armsoc' of git://git.linaro.org/people/rmk/linux-arm: (60 commits) ARM: remove disable_fiq and arch_ret_to_user macros ARM: make entry-macro.S depend on !MULTI_IRQ_HANDLER ARM: rpc: make default fiq handler run-time installed ARM: make arch_ret_to_user macro optional ARM: amba: samsung: use common amba device initializers ARM: amba: spear: use common amba device initializers ARM: amba: nomadik: use common amba device initializers ARM: amba: u300: use common amba device initializers ARM: amba: lpc32xx: use common amba device initializers ARM: amba: netx: use common amba device initializers ARM: amba: bcmring: use common amba device initializers ARM: amba: ep93xx: use common amba device initializers ARM: amba: omap2: use common amba device initializers ARM: amba: integrator: use common amba device initializers ARM: amba: realview: get rid of private platform amba_device initializer ARM: amba: versatile: get rid of private platform amba_device initializer ARM: amba: vexpress: get rid of private platform amba_device initializer ARM: amba: provide common initializers for static amba devices ARM: amba: make use of -1 IRQs warn ARM: amba: u300: get rid of NO_IRQ initializers ...
2012-03-24Merge branch 'mmci' into ambaRussell King
2012-03-21dmaengine/dma_slave: introduce inline wrappersAlexandre Bounine
Add inline wrappers for device_prep_slave_sg() and device_prep_dma_cyclic() interfaces to hide new parameter from current users of affected interfaces. Convert current users to use new wrappers instead of direct calls. Suggested by Russell King [https://lkml.org/lkml/2012/2/3/269]. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-03-16ARM: 7362/1: AMBA: Add module_amba_driver() helper macro for amba_driverviresh kumar
For simple modules that contain a single amba_driver without any additional setup code then ends up being a block of duplicated boilerplate. This patch adds a new macro, module_amba_driver(), which replaces the module_init()/module_exit() registrations with template functions. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-03-04mmc: mmci: reduce max_blk_count to avoid overflowing max_req_sizeWill Deacon
On a system with large pages (64k in my case), the following BUG is triggered in MMC core: [ 2.338023] BUG: failure at drivers/mmc/core/core.c:221/mmc_start_request()! [ 2.338102] Kernel panic - not syncing: BUG! [ 2.338155] Call trace: [ 2.338228] [<ffffffc00008635c>] dump_backtrace+0x0/0x120 [ 2.338317] [<ffffffc0003365ec>] dump_stack+0x14/0x1c [ 2.338403] [<ffffffc000336990>] panic+0xbc/0x1f0 [ 2.338498] [<ffffffc00027a494>] mmc_start_request+0x154/0x184 [ 2.338600] [<ffffffc00027abdc>] mmc_start_req+0x110/0x140 [ 2.338701] [<ffffffc00028604c>] mmc_blk_issue_rw_rq+0x7c/0x39c [ 2.338804] [<ffffffc00028652c>] mmc_blk_issue_rq+0x1c0/0x468 [ 2.338905] [<ffffffc000287564>] mmc_queue_thread+0x68/0x118 [ 2.338995] [<ffffffc0000bc308>] kthread+0x84/0x8c This is because of a 64k request with a max_req_size of 64k-1 bytes. The following patch fixes the problem by limiting the max_blk_count such that max_blk_count * max_blk_size == max_req_size. I couldn't pursuade the compiler to emit a shift instead of a div without encoding the shift explicitly. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-22dmaengine: Pass dma_slave_config .device_fc = NULL for all existing usersViresh Kumar
.device_fc is added in struct dma_slave_config recently. All user drivers, which want DMA to be the flow controller must pass this field as false. As earlier driver don't look to use this feature, mark it false for now. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-02ARM: 7280/1: mmc: mmci: Cache MMCICLOCK and MMCIPOWER registerUlf Hansson
Instead of reading a register value everytime we need to apply a new value for it, maintain a cached copy for it. This also means we are able to skip writes that are not needed. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-25ARM: amba: make irq 0 invalidRussell King
Fix core bus and MMCI such that irq 0 means that there is no IRQ attached. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20ARM: 7230/1: mmc: mmci: Fix PIO read for small SDIO packetsUlf Hansson
Corrects a bug in MMCI host driver which silently causes small reads (< 4 bytes as only used in SDIO) from PL-18X to fail. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Fredrik Soderstedt <fredrik.soderstedt@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20ARM: 7227/1: mmc: mmci: Prepare for SDIO before setting up DMA jobUlf Hansson
Move the SDIO preparation to be done before the DMA job is setup. This makes it possible to do DMA for SDIO transfers as well as the earlier supported pio mode. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20ARM: 7223/1: mmc: mmci: Fixup use of runtime PM and use autosuspendUlf Hansson
Added use of runtime PM autosuspend feature, with a fixed timeout of 50 ms. This will prevent adding a latency, although very minor, for _every_ request. Moreover the runtime_get_sync is now also used in set_ios and suspend since the runtime resourses are needed here as well. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-20ARM: 7221/1: mmc: mmci: Change from using legacy suspendUlf Hansson
This patch switch from using the legacy suspend/resume to the new way of registering PM callbacks. No functional change is done. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-19 06:54:36 +0000