summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/core
AgeCommit message (Collapse)Author
2020-12-04Merge branch 'fixes' into nextUlf Hansson
2020-12-04mmc: block: Fixup condition for CMD13 polling for RPMB requestsBean Huo
The CMD13 polling is needed for commands with R1B responses. In commit a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response"), the intent was to introduce this for requests targeted to the RPMB partition. However, the condition to trigger the polling loop became wrong, leading to unnecessary polling. Let's fix the condition to avoid this. Fixes: a0d4c7eb71dd ("mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response") Cc: stable@vger.kernel.org Reported-by: Zhan Liu <zliua@micron.com> Signed-off-by: Zhan Liu <zliua@micron.com> Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20201202202320.22165-1-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-11-16mmc: core: Initial support for SD express card/hostUlf Hansson
In the SD specification v7.10 the SD express card has been added. This new type of removable SD card, can be managed via a PCIe/NVMe based interface, while also allowing backwards compatibility towards the legacy SD interface. To keep the backwards compatibility, it's required to start the initialization through the legacy SD interface. If it turns out that the mmc host and the SD card, both supports the PCIe/NVMe interface, then a switch should be allowed. Therefore, let's introduce some basic support for this type of SD cards to the mmc core. The mmc host, should set MMC_CAP2_SD_EXP if it supports this interface and MMC_CAP2_SD_EXP_1_2V, if also 1.2V is supported, as to inform the core about it. To deal with the switch to the PCIe/NVMe interface, the mmc host is required to implement a new host ops, ->init_sd_express(). Based on the initial communication between the host and the card, host->ios.timing is set to either MMC_TIMING_SD_EXP or MMC_TIMING_SD_EXP_1_2V, depending on if 1.2V is supported or not. In this way, the mmc host can check these values in its ->init_sd_express() ops, to know how to proceed with the handover. Note that, to manage card insert/removal, the mmc core sticks with using the ->get_cd() callback, which means it's the host's responsibility to make sure it provides valid data, even if the card may be managed by PCIe/NVMe at the moment. As long as the card seems to be present, the mmc core keeps the card powered on. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Rui Feng <rui_feng@realsil.com.cn> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/1603936636-3126-1-git-send-email-rui_feng@realsil.com.cn
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-09Merge branch 'fixes' into nextUlf Hansson
2020-10-09mmc: core: don't set limits.discard_granularity as 0Coly Li
In mmc_queue_setup_discard() the mmc driver queue's discard_granularity might be set as 0 (when card->pref_erase > max_discard) while the mmc device still declares to support discard operation. This is buggy and triggered the following kernel warning message, WARNING: CPU: 0 PID: 135 at __blkdev_issue_discard+0x200/0x294 CPU: 0 PID: 135 Comm: f2fs_discard-17 Not tainted 5.9.0-rc6 #1 Hardware name: Google Kevin (DT) pstate: 00000005 (nzcv daif -PAN -UAO BTYPE=--) pc : __blkdev_issue_discard+0x200/0x294 lr : __blkdev_issue_discard+0x54/0x294 sp : ffff800011dd3b10 x29: ffff800011dd3b10 x28: 0000000000000000 x27: ffff800011dd3cc4 x26: ffff800011dd3e18 x25: 000000000004e69b x24: 0000000000000c40 x23: ffff0000f1deaaf0 x22: ffff0000f2849200 x21: 00000000002734d8 x20: 0000000000000008 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000394 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 00000000000008b0 x9 : ffff800011dd3cb0 x8 : 000000000004e69b x7 : 0000000000000000 x6 : ffff0000f1926400 x5 : ffff0000f1940800 x4 : 0000000000000000 x3 : 0000000000000c40 x2 : 0000000000000008 x1 : 00000000002734d8 x0 : 0000000000000000 Call trace: __blkdev_issue_discard+0x200/0x294 __submit_discard_cmd+0x128/0x374 __issue_discard_cmd_orderly+0x188/0x244 __issue_discard_cmd+0x2e8/0x33c issue_discard_thread+0xe8/0x2f0 kthread+0x11c/0x120 ret_from_fork+0x10/0x1c ---[ end trace e4c8023d33dfe77a ]--- This patch fixes the issue by setting discard_granularity as SECTOR_SIZE instead of 0 when (card->pref_erase > max_discard) is true. Now no more complain from __blkdev_issue_discard() for the improper value of discard granularity. This issue is exposed after commit b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"), a "Fixes:" tag is also added for the commit to make sure people won't miss this patch after applying the change of __blkdev_issue_discard(). Fixes: e056a1b5b67b ("mmc: queue: let host controllers specify maximum discard timeout") Fixes: b35fd7422c2f ("block: check queue's limits.discard_granularity in __blkdev_issue_discard()"). Reported-and-tested-by: Vicente Bergas <vicencb@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20201002013852.51968-1-colyli@suse.de Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-25block: add a bdev_is_partition helperChristoph Hellwig
Add a littler helper to make the somewhat arcane bd_contains checks a little more obvious. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-25mmc: core: document mmc_hw_reset()Wolfram Sang
Add documentation for mmc_hw_reset to make sure the intended use case is clear. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200918215446.65654-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-24bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flagChristoph Hellwig
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the backing_dev_info shared between the block drivers and the writeback code. To help untangling the dependency replace it with a queue flag and a superblock flag derived from it. This also helps with the case of e.g. a file system requiring stable writes due to its own checksumming, but not forcing it on other users of the block device like the swap code. One downside is that we an't support the stable_pages_required bdi attribute in sysfs anymore. It is replaced with a queue attribute which also is writable for easier testing. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-09-14mmc: core: clear 'doing_init_tune' also after failuresWolfram Sang
Reorganize the code, so that the flag is always cleared independently of a good or bad case. Fixes: 97a7d87e96b0 ("mmc: core: add a 'doing_init_tune' flag and a 'mmc_doing_tune' helper") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200914112845.21855-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07Merge branch 'fixes' into nextUlf Hansson
2020-09-07mmc: core: simplify an expressionWolfram Sang
We already have 'host' as a variable, so use it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200901150250.26236-5-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: core: add a 'doing_init_tune' flag and a 'mmc_doing_tune' helperWolfram Sang
Our driver needs to know when tuning is in progress. 'doing_retune' only covers re-tuning, not the initial tuning. Add another flag to detect the initial tuning state and add a helper which tells us if any kind of tuning is going on. Only implemented for MMC currently because that's where we need it. SD can be added later if it becomes necessary. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200901150250.26236-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: core: when downgrading HS400, callback into drivers earlierWolfram Sang
The driver specific downgrade function makes more sense if we run it before we set the timing to something lower, not after. Otherwise some non-HS400 communication has already happened. No need to convert users. There is only one currently which needs this change in a following patch. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20200901150250.26236-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: core: Allow setting slot index via device tree aliasMatthias Schiffer
As with GPIO, UART and others, allow specifying the device index via the aliases node in the device tree. On embedded devices, there is often a combination of removable (e.g. SD card) and non-removable MMC devices (e.g. eMMC). Therefore the index might change depending on * host of removable device * removable card present or not This makes it difficult to hardcode the root device, if it is on the non-removable device. E.g. if SD card is present eMMC will be mmcblk1, if SD card is not present at boot, eMMC will be mmcblk0. Alternative solutions like PARTUUIDs do not cover the case where multiple mmcblk devices contain the same image. This is a common issue on devices that can boot both from eMMC (for regular boot) and SD cards (as a temporary boot medium for development). When a firmware image is installed to eMMC after a test boot via SD card, there will be no reliable way to refer to a specific device using (PART)UUIDs oder LABELs. The demand for this feature has led to multiple attempts to implement it, dating back at least to 2012 (see https://www.spinics.net/lists/linux-mmc/msg26586.html for a previous discussion from 2014). All indices defined in the aliases node will be reserved for use by the respective MMC device, moving the indices of devices that don't have an alias up into the non-reserved range. If the aliases node is not found, the driver will act as before. This is a rebased and cleaned up version of https://www.spinics.net/lists/linux-mmc/msg26588.html . Based-on-patch-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lkml.org/lkml/2020/8/5/194 Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Link: https://lore.kernel.org/r/20200901085004.2512-2-matthias.schiffer@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sd: Use kobj_to_dev() instead of container_of()Tian Tao
Use kobj_to_dev() instead of container_of() Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Link: https://lore.kernel.org/r/1598230956-58523-1-git-send-email-tiantao6@hisilicon.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: test: remove ambiguity in test descriptionWolfram Sang
When reading the test description, I thought a correction of the xfer_size was tested, which is not the case. It is tested that the xfer_size is correct. Use 'proper xfer_size' to remove this ambiguity. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Link: https://lore.kernel.org/r/20200817115838.2981-1-wsa@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdio: Export SDIO revision and info strings to userspacePali Rohár
For SDIO functions, SDIO cards and SD COMBO cards are exported revision number and info strings from CISTPL_VERS_1 structure. Revision number should indicate compliance of standard and info strings should contain product information in same format as product information for PCMCIA cards. Product information for PCMCIA cards should contain following strings in this order: Manufacturer, Product Name, Lot number, Programming Conditions. Note that not all SDIO cards export all those info strings in that order as described in PCMCIA Metaformat Specification. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200727133837.19086-5-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdio: Extend sdio_config_attr macro and use it also for modaliasPali Rohár
This simplify code for generating sdio config attributes and allows easily define new sdio attributes. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200727133837.19086-4-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdio: Parse CISTPL_VERS_1 major and minor revision numbersPali Rohár
They should indicate compliance of standard. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200727133837.19086-3-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdio: Check for CISTPL_VERS_1 buffer sizePali Rohár
Before parsing CISTPL_VERS_1 structure check that its size is at least two bytes to prevent buffer overflow. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200727133837.19086-2-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-09-07mmc: sdio: Use mmc_pre_req() / mmc_post_req()Adrian Hunter
SDHCI changed from using a tasklet to finish requests, to using an IRQ thread i.e. commit c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet"). Because this increased the latency to complete requests, a preparatory change was made to complete the request from the IRQ handler if possible i.e. commit 19d2f695f4e827 ("mmc: sdhci: Call mmc_request_done() from IRQ handler if possible"). That alleviated the situation for MMC block devices because the MMC block driver makes use of mmc_pre_req() and mmc_post_req() so that successful requests are completed in the IRQ handler and any DMA unmapping is handled separately in mmc_post_req(). However SDIO was still affected, and an example has been reported with up to 20% degradation in performance. Looking at SDIO I/O helper functions, sdio_io_rw_ext_helper() appeared to be a possible candidate for making use of asynchronous requests within its I/O loops, but analysis revealed that these loops almost never iterate more than once, so the complexity of the change would not be warrented. Instead, mmc_pre_req() and mmc_post_req() are added before and after I/O submission (mmc_wait_for_req) in mmc_io_rw_extended(). This still has the potential benefit of reducing the duration of interrupt handlers, as well as addressing the latency issue for SDHCI. It also seems a more reasonable solution than forcing drivers to do everything in the IRQ handler. Reported-by: Dmitry Osipenko <digetx@gmail.com> Fixes: c07a48c2651965 ("mmc: sdhci: Remove finish_tasklet") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200903082007.18715-1-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-06Merge tag 'sched-fifo-2020-08-04' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull sched/fifo updates from Ingo Molnar: "This adds the sched_set_fifo*() encapsulation APIs to remove static priority level knowledge from non-scheduler code. The three APIs for non-scheduler code to set SCHED_FIFO are: - sched_set_fifo() - sched_set_fifo_low() - sched_set_normal() These are two FIFO priority levels: default (high), and a 'low' priority level, plus sched_set_normal() to set the policy back to non-SCHED_FIFO. Since the changes affect a lot of non-scheduler code, we kept this in a separate tree" * tag 'sched-fifo-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits) sched,tracing: Convert to sched_set_fifo() sched: Remove sched_set_*() return value sched: Remove sched_setscheduler*() EXPORTs sched,psi: Convert to sched_set_fifo_low() sched,rcutorture: Convert to sched_set_fifo_low() sched,rcuperf: Convert to sched_set_fifo_low() sched,locktorture: Convert to sched_set_fifo() sched,irq: Convert to sched_set_fifo() sched,watchdog: Convert to sched_set_fifo() sched,serial: Convert to sched_set_fifo() sched,powerclamp: Convert to sched_set_fifo() sched,ion: Convert to sched_set_normal() sched,powercap: Convert to sched_set_fifo*() sched,spi: Convert to sched_set_fifo*() sched,mmc: Convert to sched_set_fifo*() sched,ivtv: Convert to sched_set_fifo*() sched,drm/scheduler: Convert to sched_set_fifo*() sched,msm: Convert to sched_set_fifo*() sched,psci: Convert to sched_set_fifo*() sched,drbd: Convert to sched_set_fifo*() ...
2020-08-05Merge tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds
Pull MMC updates from Ulf Hansson: "MMC core: - Add a new host cap bit and a corresponding DT property, to support power cycling of the card by FW at system suspend/resume. - Fix clock rate setting for SDIO in SDR12/SDR25 speed-mode - Fix switch to 1/4-bit mode at system suspend/resume for SD-combo cards - Convert the mmc-pwrseq DT bindings to the json-schema - Always allow the card detect uevent to be consumed by userspace MMC host controllers: - Convert a few DT bindings to the json-schema - mtk-sd: - Add support for command queue through cqhci - Add support for the MT6779 variant - renesas_sdhi_internal_dmac: - Fix dma unmapping in the error path - sdhci_am654: - Add support for the AM65x PG2.0 variant - Extend support for phys/clocks - sdhci-cadence: - Drop incorrect HW tuning for SD mode - sdhci-msm: - Add support for interconnect bandwidth scaling - Enable internal voltage control - Enable low power state for pinctrls - sdhci-of-at91: - Ludovic Desroches handovers maintenance to Eugen Hristev - sdhci-pci-gli: - Improve clock handling for GL975x - sdhci-pci-o2micro: - Add HW tuning for SDR104 mode - Fix support for O2 host controller Seabird1" * tag 'mmc-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (66 commits) mmc: mediatek: make function msdc_cqe_disable() static MAINTAINERS: mmc: sdhci-of-at91: handover maintenance to Eugen Hristev dt-bindings: mmc: mediatek: Add document for mt6779 mmc: mediatek: command queue support mmc: mediatek: refine msdc timeout api mmc: mediatek: add MT6779 MMC driver support mmc: sdhci-pci-o2micro: Add HW tuning for SDR104 mode mmc: sdhci-pci-o2micro: Bug fix for O2 host controller Seabird1 mmc: via-sdmmc: use generic power management memstick: jmb38x_ms: use generic power management mmc: sdhci-cadence: do not use hardware tuning for SD mode mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL975x mmc: cqhci: Fix a print format for the task descriptor mmc: sdhci-of-arasan: fix timings allocation code mmc: sdhci: Fix a potential uninitialized variable dt-bindings: mmc: renesas,sdhi: convert to YAML dt-bindings: mmc: convert arasan sdhci bindings to yaml mmc: sdhci: Fix potential null pointer access while accessing vqmmc mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND dt-bindings: mmc: Add full-pwr-cycle-in-suspend property ...
2020-07-13mmc: core: Add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPENDYoshihiro Shimoda
The commit 5a36d6bcdf23 ("mmc: core: Add DT-bindings for MMC_CAP2_FULL_PWR_CYCLE") added the "full-pwr-cycle" property which is possible to perform a full power cycle of the card at any time. However, some environment (like r8a77951-salvator-xs) is possible to perform a full power cycle of the card in suspend via firmware (PSCI on arm-trusted-firmware). So, in worst case, since we are not doing a graceful shutdown of the eMMC device (just cut VCCQ while the eMMC is "sleeping") in suspend, it could lead to internal data corruptions. So, add MMC_CAP2_FULL_PWR_CYCLE_IN_SUSPEND to do a graceful shutdown which issues Power Off notification before entering system suspend. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1594123122-13156-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Correct misspelling of 'mq' in mmc_init_request()'s docsLee Jones
Correcting this misspelling squashes the following W=1 build warning(s): mmc/core/queue.c:212: warning: Function parameter or member 'mq' not described in '__mmc_init_request' mmc/core/queue.c:212: warning: Excess function parameter 'q' description in '__mmc_init_request' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-8-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Add missing documetation for 'mmc' and 'ios'Lee Jones
Remainder of the kerneldoc descriptions look present and correct. Fixes the following W=1 kernel build warnings: drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'mmc' not described in 'mmc_regulator_set_vqmmc' drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'ios' not described in 'mmc_regulator_set_vqmmc' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-4-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Provide description for sdio_set_host_pm_flags()'s 'flag' argLee Jones
Add missing kerneldoc entry for sdio_set_host_pm_flags()'s 'flag' function argument. Fixes the following W=1 kernel build warning: kernel/drivers/mmc/core/sdio_io.c:722: warning: Function parameter or member 'flags' not described in 'sdio_set_host_pm_flags' Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-3-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Mark fixups as __maybe_unusedLee Jones
Not all source files which include quirks.h make use of the all of the available fixup information. When this happens the compiler complains that some constant variables are defined by never used. We can fix this by telling the compiler that this intentional by simply marking them as __maybe_unused. Fixes the following W=1 kernel build warnings: In file included from drivers/mmc/core/sdio.c:22: drivers/mmc/core/quirks.h:105:31: warning: ‘mmc_ext_csd_fixups’ defined but not used [-Wunused-const-variable=] 105 | static const struct mmc_fixup mmc_ext_csd_fixups[] = { | ^~~~~~~~~~~~~~~~~~ drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=] 17 | static const struct mmc_fixup mmc_blk_fixups[] = { | ^~~~~~~~~~~~~~ In file included from drivers/mmc/core/mmc.c:25: drivers/mmc/core/quirks.h:123:31: warning: ‘sdio_fixup_methods’ defined but not used [-Wunused-const-variable=] 123 | static const struct mmc_fixup sdio_fixup_methods[] = { | ^~~~~~~~~~~~~~~~~~ drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=] 17 | static const struct mmc_fixup mmc_blk_fixups[] = { | ^~~~~~~~~~~~~~ Cc: Andrei Warkentin <andreiw@motorola.com> Cc: Martin Mares <mj@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-2-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Set default power mode in mmc_alloc_host()Veerabhadrarao Badiganti
Set the default power mode, MMC_POWER_UNDEFINED, in mmc_alloc_host() rather than in mmc_start_host(). This enables host drivers to make use of the initial state during ->probe(). Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1592919288-1020-3-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: fix clock rate setting for SDR12/SDR25 modeHaibo Chen
In current code logic, when work in SDR12/SDR25 mode, the final clock rate is incorrect, just the legancy 400KHz, because the card->sw_caps.sd3_bus_mode do not has the flag SD_MODE_UHS_SDR12 or SD_MODE_UHS_SDR25. Besides, SDIO_SPEED_SDR12 is actually value 0, and every mode need to config the timing and clock rate, so remove the ‘if’ operator. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Tested-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/1592813959-5914-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Fix 1-bit mode for SD-combo cards during suspendYue Hu
Commit 6b5eda369ac3 ("sdio: put active devices into 1-bit mode during suspend") disabled 4-bit mode during system suspend. After this patch, commit 7310ece86ad7 ("mmc: implement SD-combo (IO+mem) support") used new sdio_enable_4bit_bus() instead of sdio_enable_wide() to support SD-combo cards, also for card resume. However, no corresponding support added during suspend. That is not correct. Let's fix it. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20200609081431.6376-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Enable SDIO 4-bit bus if not support SD_SCR_BUS_WIDTH_4 for SD ↵Yue Hu
combo card If the card type is SD combo(MMC_TYPE_SD_COMBO) and the memory part does not support wider bus(SD_SCR_BUS_WIDTH_4), nothing will be done except return 0. However, we should check whether IO part support wider bus or not. We should use available IO ability if supported. In addition, there's a duplicated check to MMC_CAP_4_BIT_DATA since sdio_enable_wide() will include that check. And we can also save one call site to sdio_enable_wide() after this change. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20200608103009.5000-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Return ret if sdio_disable_func() failsYue Hu
We should return any possible error returned by mmc_io_rw_direct() rather than only -EIO in sdio_disable_func() failure path. Signed-off-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200604100102.13572-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Always allow the card detect uevent to be consumedUlf Hansson
The approach to allow userspace ~5s to consume the uevent, which is triggered when a new card is inserted/initialized, currently requires the mmc host to support system wakeup. This is unnecessary limiting, especially for an mmc host that relies on a GPIO IRQ for card detect. More precisely, the mmc host may not support system wakeup for its corresponding struct device, while the GPIO IRQ still could be configured as a wakeup IRQ via enable_irq_wake(). To support all various cases, let's simply drop the need for the wakeup support. Instead let's always register a wakeup source and activate it for all card detect IRQs by calling __pm_wakeup_event(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200529102341.12529-1-ulf.hansson@linaro.org
2020-07-08mmc: remove the call to check_disk_changeChristoph Hellwig
The mmc driver doesn't support event notifications, which means that check_disk_change is a no-op. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-24blk-mq: move failure injection out of blk_mq_complete_requestChristoph Hellwig
Move the call to blk_should_fake_timeout out of blk_mq_complete_request and into the drivers, skipping call sites that are obvious error handlers, and remove the now superflous blk_mq_force_complete_rq helper. This ensures we don't keep injecting errors into completions that just terminate the Linux request after the hardware has been reset or the command has been aborted. Reviewed-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-06-15sched,mmc: Convert to sched_set_fifo*()Peter Zijlstra
Because SCHED_FIFO is a broken scheduler model (see previous patches) take away the priority field, the kernel can't possibly make an informed decision. In this case, use fifo_low, because it only cares about being above SCHED_NORMAL. Effectively no change in behaviour. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Ingo Molnar <mingo@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: core: Export device/vendor ids from Common CIS for SDIO cardsPali Rohár
Device/vendor ids from Common CIS (Card Information Structure) may be different as device/vendor ids from CIS on particular SDIO function. Kernel currently exports only device/vendor ids from SDIO functions and not "main" device/vendor ids from Common CIS. This patch exports "main" device/vendor ids for SDIO and SD combo cards at top level mmc device in sysfs hierarchy. Userspace can use e.g. udev rules to correctly match whole SDIO card based on Common CIS device/vendor id and not only one particular SDIO function. Having this information in userspace also helps developers to debug whole SDIO card as e.g. kernel mmc quirks use device/vendor ids from Common CIS and not from particular SDIO function. Also it allows to write userspace applications which list all connected SDIO cards based on CIS ids. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Link: https://lore.kernel.org/r/20200527110858.17504-2-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-29mmc: core: Do not export MMC_NAME= and MODALIAS=mmc:block for SDIO cardsPali Rohár
SDIO non-combo cards are not handled by mmc_block driver and do not have accessible CID register which is used for MMC_NAME= construction. Signed-off-by: Pali Rohár <pali@kernel.org> Reviewed-by: Marek Behún <marek.behun@nic.cz> Link: https://lore.kernel.org/r/20200527110858.17504-1-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28mmc: sdio: Fix macro name for Marvell device with ID 0x9134Pali Rohár
Marvell SDIO device ID 0x9134 is used in SDIO Common CIS (Card Information Structure) and not in SDIO wlan function (with ID 1). SDIO Common CIS is accessed by function ID 0. So change this misleading macro name to SDIO_DEVICE_ID_MARVELL_8887_F0 as it does not refer to wlan function. It refers to function 0. Wlan module on this SDIO card is available at function ID 1 and is identified by different SDIO device ID 0x9135. Kernel quirks for SDIO devices are matched against device ID from SDIO Common CIS. Therefore device ID used in quirk is correct, just has misleading name. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200522144412.19712-2-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28Merge branch 'fixes' into nextUlf Hansson
2020-05-28mmc: core: Enable erase/discard/trim support for all mmc hostsUlf Hansson
Step by step, mmc host drivers and the mmc core have been improved in regards to support erase/discard/trim operations. We have now reached a point when it no longer seems reasonable to use an opt-in approach to enable the functionality. Therefore, let's switch to make the operations always supported. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200508112853.23525-1-ulf.hansson@linaro.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2020-05-28mmc: core: expose info about enhanced rpmb supportKrishna Konda
Following eMMC JEDEC JESD84-B51 standard, an enhanced form of rpmb is supported. What this enhanced mode supports is in addition to be able to write one rpmb or two rpmb frames at a time, 32 frames can be written at a time. Expose this information present in ext csd field so that the user space application that wants to make use of this can do so. Signed-off-by: Krishna Konda <kkonda@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1588341189-4371-1-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-05-28mmc: sdio: Align the initialization commands in retry path for UHS-IUlf Hansson
According to the comment in mmc_sdio_reinit_card(), some SDIO cards may require a "[CMD5,5,3,7] init sequence", which isn't always obeyed in mmc_sdio_init_card(). Especially, when we end up retrying the UHS-I specific initialization, there is a missing CMD5. Let's update the code to make the behaviour consistent and let's also take the opportunity to clean up the code a bit, to avoid open coding. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-5-ulf.hansson@linaro.org
2020-05-28mmc: sdio: Re-use negotiated OCR mask when re-sending CMD8Ulf Hansson
While initializing an SDIO card in mmc_sdio_init_card(), we may need to retry the UHS-I specific initialization, in case the first attempt fails. This leads to resending a CMD8, but also to restart from scratch with the so called OCR mask negotiations. This is unnecessary as we already have a negotiated OCR mask, so let's use that instead. In this way, the behaviour also becomes more consistent with other similar paths. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-4-ulf.hansson@linaro.org
2020-05-28mmc: sdio: Fix several potential memory leaks in mmc_sdio_init_card()Ulf Hansson
Over the years, the code in mmc_sdio_init_card() has grown to become quite messy. Unfortunate this has also lead to that several paths are leaking memory in form of an allocated struct mmc_card, which includes additional data, such as initialized struct device for example. Unfortunate, it's a too complex task find each offending commit. Therefore, this change fixes all memory leaks at once. Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-3-ulf.hansson@linaro.org
2020-05-28mmc: sdio: Fix potential NULL pointer error in mmc_sdio_init_card()Ulf Hansson
During some scenarios mmc_sdio_init_card() runs a retry path for the UHS-I specific initialization, which leads to removal of the previously allocated card. A new card is then re-allocated while retrying. However, in one of the corresponding error paths we may end up to remove an already removed card, which likely leads to a NULL pointer exception. So, let's fix this. Fixes: 5fc3d80ef496 ("mmc: sdio: don't use rocr to check if the card could support UHS mode") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200430091640.455-2-ulf.hansson@linaro.org
2020-05-28mmc: core: Use DEFINE_DEBUGFS_ATTRIBUTE instead of DEFINE_SIMPLE_ATTRIBUTEZou Wei
Fixes coccicheck warning: drivers/mmc/core/debugfs.c:222:0-23: WARNING: mmc_clock_fops should be defined with DEFINE_DEBUGFS_ATTRIBUTE Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files Fixes: 703aae3d09a4b ("mmc: add a file to debugfs for changing host clock at runtime") Fixes: a04c50aaa916f ("mmc: core: no need to check return value of debugfs_create functions") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1587633319-19835-1-git-send-email-zou_wei@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-22 00:47:00 +0000