summaryrefslogtreecommitdiffstats
path: root/drivers/media/pci
AgeCommit message (Collapse)Author
2020-12-03media: solo6x10: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'snd_solo_pcm_open()' (solo6x10-g723.c) GFP_KERNEL can be used because this flag is already used jew a few lines above. When memory is allocated in 'solo_enc_alloc()' (solo6x10-v4l2-enc.c) GFP_KERNEL can be used because this flag is already used jew a few lines above. When memory is allocated in 'solo_enc_v4l2_init()' (solo6x10-v4l2-enc.c) GFP_KERNEL can be used because calls 'solo_enc_alloc()' which already uses this flag. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Ismael Luceno <ismael@iodev.co.uk> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: saa7146: fix array overflow in vidioc_s_audio()Dan Carpenter
The "a->index" value comes from the user via the ioctl. The problem is that the shift can wrap resulting in setting "mxb->cur_audinput" to an invalid value, which later results in an array overflow. Fixes: 6680427791c9 ("[media] mxb: fix audio handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: cx88: use ARRAY_SIZEXu Wang
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: cx23885: add more quirks for reset DMA on some AMD IOMMUDaniel Lee Kruse
On AMD Family 15h (Models 30h-3fh), I/O Memory Management Unit RiSC engine sometimes stalls, requiring a reset. As result, MythTV and w-scan won't scan channels on the AMD Kaveri APU with the Hauppauge QuadHD TV tuner card. For the solution I added the Input/Output Memory Management Unit's PCI Identity of 0x1423 to the broken_dev_id[] array, which is used by a quirks logic meant to fix similar problems with other AMD chipsets. Signed-off-by: Daniel Lee Kruse <daniel.lee.kruse@protonmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: bttv: use generic power managementVaibhav Gupta
Drivers using legacy power management .suspen()/.resume() callbacks have to manage PCI states and device's PM states themselves. They also need to take care of standard configuration registers. Switch to generic power management framework using a single "struct dev_pm_ops" variable to take the unnecessary load from the driver. This also avoids the need for the driver to directly call most of the PCI helper functions and device power state control functions, as through the generic framework PCI Core takes care of the necessary operations, and drivers are required to do only device-specific jobs. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: dm1105: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated, GFP_KERNEL can be used because it is called from the probe function and no lock is taken. The call chain is: dm1105_probe --> dm1105_hw_init --> dm1105_dma_map @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: bt8xx: avoid a useless memsetChristophe JAILLET
Avoid a memset after a call to 'dma_alloc_coherent()'. This is useless since commit 518a2f1925c3 ("dma-mapping: zero memory returned from dma_alloc_*") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: bt8xx: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'bt878_mem_alloc()' (bt878.c), GFP_KERNEL can be used because it is only called from the probe function (i.e. 'bt878_probe()') and no lock is taken. When memory is allocated in 'btcx_riscmem_alloc()' (btcx-risc.c), GFP_KERNEL can be used because all the callers either already use GFP_KERNEL or are called from a probe function or are called from a .buf_prepare function. The 4 callers are all in 'bttv-risc.c'. - bttv_risc_packed() and bttv_risc_planar(): only called from 'videobuf_queue_ops''s '.buf_prepare' functions. The call chains are: .buf_prepare (in 'bttv-driver.c') --> buffer_prepare (in 'bttv-driver.c') --> bttv_prepare_buffer --> bttv_buffer_risc --> bttv_risc_packed (x8 times) --> bttv_risc_planar (x6 times) .buf_prepare (in 'bttv-vbi.c') --> vbi_buffer_prepare (in 'bttv-vbi.c') --> bttv_risc_packed (x2 times) - bttv_risc_overlay(): already uses GFP_KERNEL - bttv_risc_init_main(): only called from the 'bttv_probe()' probe function and no spin_lock is taken in the between @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: b2c2: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'flexcop_dma_allocate()', GFP_KERNEL can be used because it is only called from the probe function (i.e. 'flexcop_pci_probe()') and no lock is taken. The call chain is: flexcop_pci_probe --> flexcop_pci_dma_init --> flexcop_dma_allocate @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-27media: mantis: remove redundant assignment to variable errColin Ian King
The variable err is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-25media: ipu3-cio2: fix trivial style warningNigel Christian
Comment has 'the' repeated twice. Let's clean it up. This patch reduces checkpatch warnings for this file to nil. Signed-off-by: Nigel Christian <nigel.l.christian@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-25media: ipu3-cio2: Use macros from mm.hAndy Shevchenko
There are few nice macros in mm.h, some of which we may use here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-17media: solo6x10: fix missing snd_card_free in error handling caseQinglang Miao
Fix to goto snd_error in error handling case when fails to do snd_ctl_add, as done elsewhere in this function. Fixes: 28cae868cd24 ("[media] solo6x10: move out of staging into drivers/media/pci.") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-17media: saa7134: improve f->fmt.win.clips NULL checkHans Verkuil
Fix this smatch error: saa7134-video.c:1286 saa7134_g_fmt_vid_overlay() error: we previously assumed 'f->fmt.win.clips' could be null (see line 1279) This is actually a false error since if f->fmt.win.clips is NULL, clipcount will be set to 0, so the clips array won't be touched, but it doesn't hurt to make this explicit in the code. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: media/pci: simplify the return expression of verify_window_lockLiu Shixin
Simplify the return expression. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Use v4l2_get_link_freq helperSakari Ailus
Use v4l2_get_link_freq helper and add support for sensor drivers implementing only V4L2_CID_PIXEL_RATE. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Check receved the size against payload size, not buffer sizeSakari Ailus
Compare the received size of the payload size, not the allocated size of the buffer that is page aligned. This way also images that aren't aligned to page size are not warned about. Also wrap a line over 80 characters. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Remove traces of returned buffersSakari Ailus
If starting a video buffer queue fails, the buffers are returned to videobuf2. Remove the reference to the buffer from the driver's queue as well. Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: stable@vger.kernel.org # v4.16 and up Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Rename CIO2_IMAGE_MAX_LENGTH as CIO2_IMAGE_MAX_HEIGHTSakari Ailus
CIO2_IMAGE_MAX_LENGTH is the maximum height of the image. Rename it as "CIO2_IMAGE_MAX_HEIGHT" in order to better describe what it is. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Remove explicit type from frame size checksSakari Ailus
Now that the values are unsigned, we can remove the explicit cast to u32. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Use unsigned values where appropriateSakari Ailus
Use unsigned values for width, height, bit shifts and registers, effectively for all definitions that are not signed. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Make the field on subdev format V4L2_FIELD_NONESakari Ailus
The ipu3-cio2 doesn't make use of the field and this is reflected in V4L2 buffers as well as the try format. Do this in active format, too. Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # v4.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Validate mbus format in setting subdev formatSakari Ailus
Validate media bus code, width and height when setting the subdev format. This effectively reworks how setting subdev format is implemented in the driver. Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # v4.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Serialise access to pad formatSakari Ailus
Pad format can be accessed from user space. Serialise access to it. Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org # v4.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: ipu3-cio2: Return actual subdev formatSakari Ailus
Return actual subdev format on ipu3-cio2 subdev pads. The earlier implementation was based on an infinite recursion that exhausted the stack. Reported-by: Tsuchiya Yuto <kitakar@gmail.com> Fixes: c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org # v4.16 and up Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: Bulk remove BUG_ON(in_interrupt())Thomas Gleixner
None of these BUG_ON()'s is justified. BUG_ON() should only be used when there is really no way to survive. If at all these could be replaced by lockdep_assert_preemption_enabled() to cover all invalid caller context and not just those covered by in_interrupt(). But all functions which are invoked from those places contain already debug mechanisms to catch wrong context, so having these extra checks is not having any advantage. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: saa7164: convert to use DEFINE_SEQ_ATTRIBUTE macroLiu Shixin
Use DEFINE_SEQ_ATTRIBUTE macro to simplify the code. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: bttv: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: saa7134: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-16media: v4l2: allocate v4l2_clip objects earlyArnd Bergmann
The v4l2_format based ioctls can have an indirect pointer to an array of v4l2_clip structures for overlay mode, depending on the 'type' member. There are only five drivers that use the overlay mode and copy the data through the __user pointer. Change the five drivers to use memcpy() instead, and copy the data in common code using the check_array_args() helpers. This allows for a subsequent patch that use the same mechanism for compat ioctl handlers. Note that there is another pointer for a 'bitmap' that is only used in the 'vivid' driver and nowhere else. There is no easy way to use the same trick without adding complexity to the common code, so this remains a __user pointer. [hverkuil: fix: CHECK: spaces preferred around that '*' (ctx:VxV)] [hverkuil: fix: CHECK: Alignment should match open parenthesis] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-27media: netup_unidvb: drop initialization of PM pointersVaibhav Gupta
The .suspend() and .resume() callbacks are not defined for this driver. Thus, just the unlisting of PM pointers in the struct initializer will make no change in its behavior. Still unlisting is necessary so as to get rid of .suspend and .resume pointers as they are part of the legacy framework and should not be used in the driver code explicitly. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-26media: media/pci: prevent memory leak in bttv_probeXiaolong Huang
In bttv_probe if some functions such as pci_enable_device, pci_set_dma_mask and request_mem_region fails the allocated memory for btv should be released. Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-26media: saa7134: use generic power managementVaibhav Gupta
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. The required operations are done by PCI core. Compile-tested only. Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-26media: pci: fix common ALSA DMA-mapping related codesMarek Szyprowski
The Documentation/DMA-API-HOWTO.txt states that dma_map_sg returns the numer of the created entries in the DMA address space. However the subsequent calls to dma_sync_sg_for_{device,cpu} and dma_unmap_sg must be called with the original number of entries passed to dma_map_sg. The sg_table->nents in turn holds the result of the dma_map_sg call as stated in include/linux/scatterlist.h. Adapt the code to obey those rules. While touching this code, update it to use the modern DMA_FROM_DEVICE definitions. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-12media: av7110: don't do float point mathMauro Carvalho Chehab
It sounds that earlier versions of GCC have troubles when doing const math at compile time, if no typecast is used: on i386: ERROR: modpost: "__floatunsidf" [drivers/media/pci/ttpci/dvb-ttpci.ko] undefined! ERROR: modpost: "__ltdf2" [drivers/media/pci/ttpci/dvb-ttpci.ko] undefined! The warning was generated on gcc (SUSE Linux) 7.5.0. Gcc 9.2 compiles it fine. As an added bonus, it also fixes this objtool warning: drivers/media/pci/ttpci/av7110_v4l.c:163:11: error: SSE register return with SSE disabled Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu3-cio2: Update Copyright year and fix indentation issuesAndy Shevchenko
Update Copyright year to cover the previous changes and at the same time address indentation issues. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu3-cio2: Drop useless assignmentsAndy Shevchenko
There are assignments inside the functions which are useless. Drop them for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu3-cio2: Drop bogus check and error messageAndy Shevchenko
pcim_iomap_table() won't fail if previous pcim_iomap_regions() hasn't. Since we check pcim_iomap_regions() for failure the check close to pcim_iomap_table() is bogus and not needed. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu3-cio2: Get rid of pci_set_master() duplicationAndy Shevchenko
It's unclear why driver repeats the code from PCI core. Drop it for good. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu3-cio2: Use readl_poll_timeout() helperAndy Shevchenko
We may use special helper macro to poll IO till condition or timeout occurs. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu3-cio2: Replace infinite loop by one with clear exit conditionAndy Shevchenko
Refactor cio2_buffer_done() to get rid of infinite loop by replacing it by one with clear exit condition. This change also allows to check for an error ahead. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu3-cio2: Use macros from pfn.hAndy Shevchenko
There are few nice macros in pfn.h, some of which we may use here. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu2-cio2: Replace custom definition with PAGE_SIZEAndy Shevchenko
It's quite unlikely that another page size will be supported, but in any case there is still an inconsistency between custom page size definition and generic macros used in the driver. Switch over to the generic PAGE_SIZE for sake of the consistency. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu3-cio2: Introduce CIO2_LOP_ENTRIES constantAndy Shevchenko
This constant is used in several places in the code, define it for better maintenance. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-10media: ipu3-cio2: Simplify cleanup codeAndy Shevchenko
The code looks more nicer if we use: while (i--) instead: for (i = i - 1; i >= 0; i--) This would also allow making 'i' unsigned again. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-07Merge tag 'v5.9-rc4' into patchworkMauro Carvalho Chehab
Linux 5.9-rc4 * tag 'v5.9-rc4': (1001 commits) Linux 5.9-rc4 io_uring: fix linked deferred ->files cancellation io_uring: fix cancel of deferred reqs with ->files include/linux/log2.h: add missing () around n in roundup_pow_of_two() mm/khugepaged.c: fix khugepaged's request size in collapse_file mm/hugetlb: fix a race between hugetlb sysctl handlers mm/hugetlb: try preferred node first when alloc gigantic page from cma mm/migrate: preserve soft dirty in remove_migration_pte() mm/migrate: remove unnecessary is_zone_device_page() check mm/rmap: fixup copying of soft dirty and uffd ptes mm/migrate: fixup setting UFFD_WP flag mm: madvise: fix vma user-after-free checkpatch: fix the usage of capture group ( ... ) fork: adjust sysctl_max_threads definition to match prototype ipc: adjust proc_ipc_sem_dointvec definition to match prototype mm: track page table modifications in __apply_to_page_range() MAINTAINERS: IA64: mark Status as Odd Fixes only MAINTAINERS: add LLVM maintainers MAINTAINERS: update Cavium/Marvell entries mm: slub: fix conversion of freelist_corrupted() ...
2020-09-03media: rc: harmonize infrared durations to microsecondsSean Young
rc-core kapi uses nanoseconds for infrared durations for receiving, and microseconds for sending. The uapi already uses microseconds for both, so this patch does not change the uapi. Infrared durations do not need nanosecond resolution. IR protocols do not have durations shorter than about 100 microseconds. Some IR hardware offers 250 microseconds resolution, which is sufficient for most protocols. Better hardware has 50 microsecond resolution and is enough for every protocol I am aware off. Unify on microseconds everywhere. This simplifies the code since less conversion between microseconds and nanoseconds needs to be done. This affects: - rx_resolution member of struct rc_dev - timeout member of struct rc_dev - duration member in struct ir_raw_event Cc: "Bruno Prémont" <bonbons@linux-vserver.org> Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Maxim Levitsky <maximlevitsky@gmail.com> Cc: Patrick Lerda <patrick9876@free.fr> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Maxime Ripard <mripard@kernel.org> Cc: Chen-Yu Tsai <wens@csie.org> Cc: "David Härdeman" <david@hardeman.nu> Cc: Benjamin Valentin <benpicco@googlemail.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-03media: saa7134: avoid a shift overflowMauro Carvalho Chehab
As reported by smatch: drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type? On a 64-bits Kernel, the shift might be bigger than 32 bits. In real, this should never happen, but let's shut up the warning. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-03media: saa7134-alsa.c: number of pages should be unsigned longMauro Carvalho Chehab
As reported by smatch: drivers/media/pci/saa7134/saa7134-alsa.c:267 saa7134_alsa_dma_init() warn: should 'nr_pages << 12' be a 64 bit type? the number of patches should be unsigned long. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-09-03media: cx88-alsa: number of pages should be unsigned longMauro Carvalho Chehab
As reported by smatch: drivers/media/pci/cx88/cx88-alsa.c:286 cx88_alsa_dma_init() warn: should 'nr_pages << 12' be a 64 bit type? the number of patches should be unsigned long. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-15 04:36:12 +0000