summaryrefslogtreecommitdiffstats
path: root/drivers/leds/Kconfig
AgeCommit message (Collapse)Author
2020-09-26leds: Add driver for Acer Iconia Tab A500Dmitry Osipenko
Acer Iconia Tab A500 is an Android tablet device which has two LEDs embedded into the Power Button. Orange LED indicates "battery charging" status and white LED indicates "wake-up/charge-done" status. The new LED driver provides control over both LEDs to userspace. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: ip30: compile if COMPILE_TEST=yMarek Behún
This driver can be compiled on other platforms with small change if COMPILE_TEST=y. Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Pavel Machek <pavel@ucw.cz> Cc: Dan Murphy <dmurphy@ti.com> Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-09-26leds: various: compile if COMPILE_TEST=yMarek Behún
These drivers can be compiled without modification when COMPILE_TEST=y: cobalt-qube, cobalt-raq, netxbig, ns2 and s3c24xx Signed-off-by: Marek Behún <marek.behun@nic.cz> Cc: Pavel Machek <pavel@ucw.cz> Cc: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-08-17leds: lp50xx: Add the LP50XX family of the RGB LED driverDan Murphy
Introduce the LP5036/30/24/18/12/9 RGB LED driver. The difference in these parts are the number of LED outputs where the: LP5036 can control 36 LEDs LP5030 can control 30 LEDs LP5024 can control 24 LEDs LP5018 can control 18 LEDs LP5012 can control 12 LEDs LP5009 can control 9 LEDs The device has the ability to group LED outputs into control banks so that multiple LED banks can be controlled with the same mixing and brightness. Or the LED outputs can also be controlled independently. Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-08-17leds: LP55XX_COMMON needs to depend on LEDS_CLASSRandy Dunlap
With these kernel configs: CONFIG_LEDS_CLASS=m # CONFIG_LEDS_CLASS_MULTICOLOR is not set CONFIG_LEDS_LP55XX_COMMON=y CONFIG_LEDS_LP5521=m CONFIG_LEDS_LP5562=m leds-lp55xx-common.c has a build error because it is builtin and calls an interface that is built as a loadable module (due to LEDS_CLASS=m). By making LEDS_LP55XX_COMMON depend on LEDS_CLASS, this config combination cannot happen, thus preventing the build error. ld: drivers/leds/leds-lp55xx-common.o: in function `lp55xx_register_leds': leds-lp55xx-common.c:(.text+0xc5f): undefined reference to `devm_led_classdev_register_ext' Fixes: 33b3a561f417 ("leds: support new LP8501 device - another LP55xx common") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Dan Murphy <dmurphy@ti.com> Cc: Milo Kim <milo.kim@ti.com> Cc: linux-leds@vger.kernel.org Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-07-28Make LEDS_LP55XX_COMMON depend on I2C to fix build errors:Randy Dunlap
leds-lp55xx-common.c:(.text+0x9d): undefined reference to `i2c_smbus_read_byte_data' leds-lp55xx-common.c:(.text+0x8fc): undefined reference to `i2c_smbus_write_byte_data' These errors happened when I2C=m and LEDS_LP55XX_COMMON=y, so prevent that from being possible. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Dan Murphy <dmurphy@ti.com> Cc: linux-leds@vger.kernel.org Cc: Milo Kim <milo.kim@ti.com> Cc: Mathias Nyman <mathias.nyman@nokia.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-07-24leds: initial support for Turris Omnia LEDsMarek Behún
This adds basic support for LEDs on the front side of CZ.NIC's Turris Omnia router. There are 12 RGB LEDs. The controller supports HW triggering mode for the LEDs, but this driver does not support it yet, and sets all the LEDs defined in device-tree into SW mode upon probe. This driver uses the multicolor LED framework. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-07-22leds: lp55xx: Add multicolor framework support to lp55xxDan Murphy
Add multicolor framework support for the lp55xx family. Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-07-22leds: multicolor: Introduce a multicolor class definitionDan Murphy
Introduce a multicolor class that groups colored LEDs within a LED node. The multicolor class groups monochrome LEDs and allows controlling two aspects of the final combined color: hue and lightness. The former is controlled via the intensity file and the latter is controlled via brightness file. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> [squashed leds: multicolor: Fix camel case in documentation in]
2020-05-25leds: add aw2013 driverNikita Travkin
This commit adds support for AWINIC AW2013 3-channel LED driver. The chip supports 3 PWM channels and is controlled with I2C. Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-04-27leds: add sgm3140 driverLuca Weiss
Add a driver for the SGMICRO SGM3140 Buck/Boost Charge Pump LED driver. This device is controlled by two GPIO pins, one for enabling and the second one for switching between torch and flash mode. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-04-27leds: ariel: Add driver for status LEDs on Dell Wyse 3020Lubomir Rintel
This adds support for controlling the LEDs attached to the Embedded Controller on a Dell Wyse 3020 "Ariel" board. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2020-02-26leds: add SGI IP30 led supportThomas Bogendoerfer
This patch implemenets a driver to support the front panel LEDs of SGI Octane (IP30) workstations. Reviewed-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2019-12-21leds: tps6105x: add driver for MFD chip LED modeSven Van Asbroeck
This driver adds support for the LED operational mode of the tps6105x MFD device. Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2019-11-03leds: Kconfig: Be consistent with the usage of "LED"Dan Murphy
Update the Kconfig to be consistent in the case of using "LED" in the Kconfig. LED is an acronym and should be capitalized. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2019-11-03leds: add LED driver for EL15203000 boardOleh Kravchenko
This patch adds a LED class driver for the LEDs found on the Crane Merchandising System EL15203000 LEDs board (aka RED LEDs board). Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Reviewed-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Pavel Machek <pavel@ucw.cz>
2019-07-29leds: netxbig: remove legacy board-file supportMasahiro Yamada
Since commit ebc278f15759 ("ARM: mvebu: remove static LED setup for netxbig boards"), no one in upstream passes in the platform data to this driver. Squash leds-kirkwood-netxbig.h into the driver, and remove the legacy board-file support. Link: https://lkml.org/lkml/2019/7/20/83 Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-07-22leds: apu: drop superseeded apu2/3 led supportEnrico Weigelt
This driver only supports gpio-attached LEDs on apu1/2/3 boards, but neither gpio's themselves, nor other gpio-attached devices (eg. front button). For apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices. Therefore these boards don't need legacy support from this driver anymore. Both drivers claim the same device, so only one driver may exist in a system, putting distros in the position to decide between either apu2+ keys or apu1 led support. Therefore drop the apu2+ led support from the old driver, solve the conflict and reduce unnecessary code. Signed-off-by: Enrico Weigelt <info@metux.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-07-09Merge tag 'leds-for-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: - Add a new LED common module for ti-lmu driver family - Modify MFD ti-lmu bindings - add ti,brightness-resolution - add the ramp up/down property - Add regulator support for LM36274 driver to lm363x-regulator.c - New LED class drivers with DT bindings: - leds-spi-byte - leds-lm36274 - leds-lm3697 (move the support from MFD to LED subsystem) - Simplify getting the I2C adapter of a client: - leds-tca6507 - leds-pca955x - Convert LED documentation to ReST * tag 'leds-for-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: dt: leds-lm36274.txt: fix a broken reference to ti-lmu.txt docs: leds: convert to ReST leds: leds-tca6507: simplify getting the adapter of a client leds: leds-pca955x: simplify getting the adapter of a client leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: max77650: Remove set but not used variable 'parent' leds: avoid flush_work in atomic context leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices leds: spi-byte: add single byte SPI LED driver dt-bindings: leds: Add binding for spi-byte LED. dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property
2019-06-11Merge tag 'ti-lmu-led-drivers' into for-nextJacek Anaszewski
Merge immutable branch between LEDs, MFD and REGULATOR due to TI LMU LED support rework and introduction of two new drivers with DT bindings. * tag 'ti-lmu-led-drivers': leds: lm36274: Introduce the TI LM36274 LED driver dt-bindings: leds: Add LED bindings for the LM36274 regulator: lm363x: Add support for LM36274 mfd: ti-lmu: Add LM36274 support to the ti-lmu dt-bindings: mfd: Add lm36274 bindings to ti-lmu leds: lm3697: Introduce the lm3697 driver mfd: ti-lmu: Remove support for LM3697 dt-bindings: ti-lmu: Modify dt bindings for the LM3697 leds: TI LMU: Add common code for TI LMU devices dt-bindings: mfd: LMU: Add ti,brightness-resolution dt-bindings: mfd: LMU: Add the ramp up/down property
2019-06-07leds: lm36274: Introduce the TI LM36274 LED driverDan Murphy
Introduce the LM36274 LED driver. This driver uses the ti-lmu MFD driver to probe this LED driver. The driver configures only the LED registers and enables the outputs according to the config file. The driver utilizes the TI LMU (Lighting Management Unit) LED common framework to set the brightness bits. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-05-24leds: lm3697: Introduce the lm3697 driverDan Murphy
Introduce the lm3697 LED driver for backlighting and display. Datasheet location: http://www.ti.com/lit/ds/symlink/lm3697.pdf Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-05-24leds: TI LMU: Add common code for TI LMU devicesDan Murphy
Create a TI LMU common framework for TI LMU devices that share common features. Currently the runtime ramp and brightness setting have been identified as common features with common register settings. This work is derived from Milo Kims TI LMU MFD code. Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-05-24leds: spi-byte: add single byte SPI LED driverChristian Mauderer
This driver adds support for simple SPI based LED controller which use only one byte for setting the brightness. Signed-off-by: Christian Mauderer <oss@c-mauderer.de> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-14Merge tag 'mfd-next-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
2019-05-14Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', ↵Lee Jones
'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged Immutable branch between MFD, ARM and Net due for the 5.2 merge window
2019-05-08leds: max77650: Add LEDs supportBartosz Golaszewski
This adds basic support for LEDs for the max77650 PMIC. The device has three current sinks for driving LEDs. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-04-07Merge tag 'lm3532-driver-improvements' into for-nextJacek Anaszewski
Merge immutable branch between LEDs, MFD and OMAP Device Tree due to LM3532 backlight driver improvements and relocation. * tag 'lm3532-driver-improvements': leds: lm3532: Introduce the lm3532 LED driver mfd: ti-lmu: Remove LM3532 backlight driver references ARM: dts: omap4-droid4: Update backlight dt properties dt: lm3532: Add lm3532 dt doc and update ti_lmu doc
2019-04-07leds: lm3532: Introduce the lm3532 LED driverDan Murphy
Introduce the Texas Instruments LM3532 White LED driver. The driver supports ALS configurability or manual brightness control. The driver also supports associating LED strings with specific control banks in a group or as individually controlled strings. Signed-off-by: Dan Murphy <dmurphy@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-04-03leds: Small fixes for Flash class descriptionDan Murphy
Fix misspelling and capitalization of LED in the Kconfig. Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Dan Murphy <dmurphy@ti.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-31leds: lt3593: drop pdata handling codeDaniel Mack
The only user of this driver in mainline has now moved to DTS, so the pdata code is no longer in use by anyone. Let's drop some dead code, and make the driver depend on CONFIG_OF. Signed-off-by: Daniel Mack <daniel@zonque.org> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2019-03-31drivers: leds: Kconfig: pedantic cleanupsEnrico Weigelt, metux IT consult
Clean up spaces before tabs. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-09-10leds: add Panasonic AN30259A supportSimon Shields
AN30259A is a 3-channel LED driver which uses I2C. It supports timed operation via an internal PWM clock, and variable brightness. This driver offers support for basic hardware-based blinking and brightness control. The datasheet is freely available: https://www.alliedelec.com/m/d/a9d2b3ee87c2d1a535a41dd747b1c247.pdf Signed-off-by: Simon Shields <simon@lineageos.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-06-28leds: Modify PC Engines apu/apu2 driver to support apu3Raffaello D. Di Napoli
PC Engines apu3 is an improved version of the apu2, using the same SoC and almost everything else. This patch reuses as much as possible from the apu2 definitions, to avoid redundancy. Signed-off-by: Raffaello D. Di Napoli <rafdev@dinapo.li> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-05-23leds: lm3601x: Introduce the lm3601x LED driverDan Murphy
Introduce the family of LED devices that can drive a torch, strobe or IR LED. The LED driver can be configured with a strobe timer to execute a strobe flash. The IR LED brightness is controlled via the torch brightness register. The data sheet for each the LM36010 and LM36011 LED drivers can be found here: http://www.ti.com/product/LM36010 http://www.ti.com/product/LM36011 Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-05-14leds: Add Spreadtrum SC27xx breathing light controller driverBaolin Wang
This patch adds Spreadtrum SC27xx PMIC series breathing light controller driver, which can support 3 LEDs. Each LED can work at normal PWM mode and breathing mode. Signed-off-by: Xiaotong Lu <xiaotong.lu@spreadtrum.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-04-16leds: add LED driver for CR0014114 boardOleh Kravchenko
This patch adds a LED class driver for the RGB LEDs found on the Crane Merchandising System CR0014114 LEDs board. Signed-off-by: Oleh Kravchenko <oleg@kaa.org.ua> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-19leds: add driver for support Mellanox regmap LEDs for BMC and x86 platformVadim Pasternak
Driver obtains LED devices according to system configuration and creates devices in form: "devicename:color:function", like The full path is to be: /sys/class/leds/mlxreg\:status\:amber/brightness After timer trigger activation: echo timer > /sys/class/leds/mlxreg\:status\:amber/trigger Attributes for LED blinking will appaer in sysfs infrastructure: /sys/class/leds/mlxreg\:status\:amber/delay_off /sys/class/leds/mlxreg\:status\:amber/delay_on LED setting is controlled through the on-board programmable devices, which exports its register map. This device could be attached to any bus type, for which register mapping is supported. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-15leds: fix Kconfig text for MLXCPLD, SYSCON, MC13783, NETXBIGVadim Pasternak
It fixes grammatical errors in Kconfig file for LEDS_SYSCON, LEDS_MLXCPLD, LEDS_MC13783, LEDS_NETXBIG. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-12leds: Clarify supported chips by LM355x driverPavel Machek
Clarify which controllers are supported by which driver. Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-02-12leds: leds-mlxcpld: Allow compilation for 32 bit archVadim Pasternak
It makes leds-mlxcpld available for 32 bit architecture. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: lp8860: Various fixes to align with LED frameworkDan Murphy
Update the driver to conform with the LED framework: - use devm_led_classdev_register - destroy mutex on exit - remove dependency on CONFIG_OF in the driver and move to the Kconfig - update the MODULE_LICENSE to GPL v2 - remove setting of MAX brightness as the LED framework does this. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2018-01-08leds: lm3692x: Introduce LM3692x dual string driverDan Murphy
Introducing the LM3692x Dual-String white LED driver. Data sheet is located http://www.ti.com/lit/ds/snvsa29/snvsa29.pdf Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-11-06leds: Add driver for PC Engines APU/APU2 LEDsAlan Mizrahi
This patch implements the driver to support the front panel LEDs for PC Engines APU and APU2 boards. Signed-off-by: Alan Mizrahi <alan@mizrahi.com.ve> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-09-07Merge tag 'leds_for_4.14' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "LED class drivers improvements: leds-pca955x: - add Device Tree support and bindings - use devm_led_classdev_register() - add GPIO support - prevent crippled LED class device name - check for I2C errors leds-gpio: - add optional retain-state-shutdown DT property - allow LED to retain state at shutdown leds-tlc591xx: - merge conditional tests - add missing of_node_put leds-powernv: - delete an error message for a failed memory allocation in powernv_led_create() leds-is31fl32xx.c - convert to using custom %pOF printf format specifier Constify attribute_group structures in: - leds-blinkm - leds-lm3533 Make several arrays static const in: - leds-aat1290 - leds-lp5521 - leds-lp5562 - leds-lp8501" * tag 'leds_for_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: leds: pca955x: check for I2C errors leds: gpio: Allow LED to retain state at shutdown dt-bindings: leds: gpio: Add optional retain-state-shutdown property leds: powernv: Delete an error message for a failed memory allocation in powernv_led_create() leds: lp8501: make several arrays static const leds: lp5562: make several arrays static const leds: lp5521: make several arrays static const leds: aat1290: make array max_mm_current_percent static const leds: pca955x: Prevent crippled LED device name leds: lm3533: constify attribute_group structure dt-bindings: leds: add pca955x leds: pca955x: add GPIO support leds: pca955x: use devm_led_classdev_register leds: pca955x: add device tree support leds: Convert to using %pOF instead of full_name leds: blinkm: constify attribute_group structures. leds: tlc591xx: add missing of_node_put leds: tlc591xx: merge conditional tests
2017-09-05media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependencyArnd Bergmann
We get a link error when V4L2_FLASH_LED_CLASS=m and AS3645A is built-in: drivers/leds/leds-as3645a.o: In function `as3645a_v4l2_setup': leds-as3645a.c:(.text+0x258): undefined reference to `v4l2_flash_init' leds-as3645a.c:(.text+0x284): undefined reference to `v4l2_flash_indicator_init' leds-as3645a.c:(.text+0x2a4): undefined reference to `v4l2_flash_release' drivers/leds/leds-as3645a.o: In function `as3645a_remove': leds-as3645a.c:(.text+0x784): undefined reference to `v4l2_flash_release' This adds the same Kconfig dependency that the other V4L2 flash drivers in drivers/leds use, to avoid that broken configuration. Fixes: a56ba8fbcb55 ("media: leds: as3645a: Add LED flash class driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: leds: as3645a: Add LED flash class driverSakari Ailus
Add a LED flash class driver for the as3654a flash controller. A V4L2 flash driver for it already exists (drivers/media/i2c/as3645a.c), and this driver is based on that. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-14leds: pca955x: add GPIO supportCédric Le Goater
The PCA955x family of chips are I2C LED blinkers whose pins not used to control LEDs can be used as general purpose I/Os (GPIOs). The following adds such a support by defining different operation modes for the pins (See bindings documentation for more details). The pca955x driver is then extended with a gpio_chip when some of pins are operating as GPIOs. The default operating mode is to behave as a LED. The GPIO support is conditioned by CONFIG_LEDS_PCA955X_GPIO. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-06-19leds: Remove SEAD-3 driverPaul Burton
SEAD3 is using the generic syscon & regmap based register-bit-led driver as of commit c764583f40b8 ("MIPS: SEAD3: Use register-bit-led driver via DT for LEDs") merged in the v4.9 cycle. As such the custom SEAD-3 LED driver is now unused, so remove it. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: linux-leds@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-31 17:55:44 +0000