summaryrefslogtreecommitdiffstats
path: root/drivers/infiniband
AgeCommit message (Collapse)Author
2013-07-13Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA changes from Roland Dreier: - AF_IB (native IB addressing) for CMA from Sean Hefty - new mlx5 driver for Mellanox Connect-IB adapters (including post merge request fixes) - SRP fixes from Bart Van Assche (including fix to first merge request) - qib HW driver updates - resurrection of ocrdma HW driver development - uverbs conversion to create fds with O_CLOEXEC set - other small changes and fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (66 commits) mlx5: Return -EFAULT instead of -EPERM IB/qib: Log all SDMA errors unconditionally IB/qib: Fix module-level leak mlx5_core: Adjust hca_cap.uar_page_sz to conform to Connect-IB spec IB/srp: Let srp_abort() return FAST_IO_FAIL if TL offline IB/uverbs: Use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd() mlx5_core: Fixes for sparse warnings IB/mlx5: Make profile[] static in main.c mlx5: Fix parameter type of health_handler_t mlx5: Add driver for Mellanox Connect-IB adapters IB/core: Add reserved values to enums for low-level driver use IB/srp: Bump driver version and release date IB/srp: Make HCA completion vector configurable IB/srp: Maintain a single connection per I_T nexus IB/srp: Fail I/O fast if target offline IB/srp: Skip host settle delay IB/srp: Avoid skipping srp_reset_host() after a transport error IB/srp: Fix remove_one crash due to resource exhaustion IB/qib: New transmitter tunning settings for Dell 1.1 backplane IB/core: Fix error return code in add_port() ...
2013-07-11Merge branches 'mlx5', 'qib' and 'srp' into for-nextRoland Dreier
2013-07-11mlx5: Return -EFAULT instead of -EPERMDan Carpenter
For copy_to/from_user() failure, the correct error code is -EFAULT not -EPERM. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-11IB/qib: Log all SDMA errors unconditionallyDean Luick
This patch adds code to log SDMA errors for supportability purposes. Signed-off-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-11IB/qib: Fix module-level leakMike Marciniszyn
The vzalloc()'ed field physshadow is leaked on module unload. This patch adds vfree after the sibling page shadow is freed. Reported-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-11IB/srp: Let srp_abort() return FAST_IO_FAIL if TL offlineBart Van Assche
If the transport layer is offline it is more appropriate to let srp_abort() return FAST_IO_FAIL instead of SUCCESS. Reported-by: Sebastian Riemer <sebastian.riemer@profitbricks.com> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-11Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Lots of activity this round on performance improvements in target-core while benchmarking the prototype scsi-mq initiator code with vhost-scsi fabric ports, along with a number of iscsi/iser-target improvements and hardening fixes for exception path cases post v3.10 merge. The highlights include: - Make persistent reservations APTPL buffer allocated on-demand, and drop per t10_reservation buffer. (grover) - Make virtual LUN=0 a NULLIO device, and skip allocation of NULLIO device pages (grover) - Add transport_cmd_check_stop write_pending bit to avoid extra access of ->t_state_lock is WRITE I/O submission fast-path. (nab) - Drop unnecessary CMD_T_DEV_ACTIVE check from transport_lun_remove_cmd to avoid extra access of ->t_state_lock in release fast-path. (nab) - Avoid extra t_state_lock access in __target_execute_cmd fast-path (nab) - Drop unnecessary vhost-scsi wait_for_tasks=true usage + ->t_state_lock access in release fast-path. (nab) - Convert vhost-scsi to use modern se_cmd->cmd_kref TARGET_SCF_ACK_KREF usage (nab) - Add tracepoints for SCSI commands being processed (roland) - Refactoring of iscsi-target handling of ISCSI_OP_NOOP + ISCSI_OP_TEXT to be transport independent (nab) - Add iscsi-target SendTargets=$IQN support for in-band discovery (nab) - Add iser-target support for in-band discovery (nab + Or) - Add iscsi-target demo-mode TPG authentication context support (nab) - Fix isert_put_reject payload buffer post (nab) - Fix iscsit_add_reject* usage for iser (nab) - Fix iscsit_sequence_cmd reject handling for iser (nab) - Fix ISCSI_OP_SCSI_TMFUNC handling for iser (nab) - Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED (nab) The last five iscsi/iser-target items are CC'ed to stable, as they do address issues present in v3.10 code. They are certainly larger than I'd like for stable patch set, but are important to ensure proper REJECT exception handling in iser-target for 3.10.y" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (51 commits) iser-target: Ignore non TEXT + LOGOUT opcodes for discovery target: make queue_tm_rsp() return void target: remove unused codes from enum tcm_tmrsp_table iscsi-target: kstrtou* configfs attribute parameter cleanups iscsi-target: Fix tfc_tpg_auth_cit configfs length overflow iscsi-target: Fix tfc_tpg_nacl_auth_cit configfs length overflow iser-target: Add support for ISCSI_OP_TEXT opcode + payload handling iser-target: Rename sense_buf_[dma,len] to pdu_[dma,len] iser-target: Add vendor_err debug output target: Add (obsolete) checking for PMI/LBA fields in READ CAPACITY(10) target: Return correct sense data for IO past the end of a device target: Add tracepoints for SCSI commands being processed iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTED iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iser iscsi-target: Fix iscsit_sequence_cmd reject handling for iser iscsi-target: Fix iscsit_add_reject* usage for iser iser-target: Fix isert_put_reject payload buffer post iscsi-target: missing kfree() on error path iscsi-target: Drop left-over iscsi_conn->bad_hdr target: Make core_scsi3_update_and_write_aptpl return sense_reason_t ...
2013-07-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "This is a re-do of the net-next pull request for the current merge window. The only difference from the one I made the other day is that this has Eliezer's interface renames and the timeout handling changes made based upon your feedback, as well as a few bug fixes that have trickeled in. Highlights: 1) Low latency device polling, eliminating the cost of interrupt handling and context switches. Allows direct polling of a network device from socket operations, such as recvmsg() and poll(). Currently ixgbe, mlx4, and bnx2x support this feature. Full high level description, performance numbers, and design in commit 0a4db187a999 ("Merge branch 'll_poll'") From Eliezer Tamir. 2) With the routing cache removed, ip_check_mc_rcu() gets exercised more than ever before in the case where we have lots of multicast addresses. Use a hash table instead of a simple linked list, from Eric Dumazet. 3) Add driver for Atheros CQA98xx 802.11ac wireless devices, from Bartosz Markowski, Janusz Dziedzic, Kalle Valo, Marek Kwaczynski, Marek Puzyniak, Michal Kazior, and Sujith Manoharan. 4) Support reporting the TUN device persist flag to userspace, from Pavel Emelyanov. 5) Allow controlling network device VF link state using netlink, from Rony Efraim. 6) Support GRE tunneling in openvswitch, from Pravin B Shelar. 7) Adjust SOCK_MIN_RCVBUF and SOCK_MIN_SNDBUF for modern times, from Daniel Borkmann and Eric Dumazet. 8) Allow controlling of TCP quickack behavior on a per-route basis, from Cong Wang. 9) Several bug fixes and improvements to vxlan from Stephen Hemminger, Pravin B Shelar, and Mike Rapoport. In particular, support receiving on multiple UDP ports. 10) Major cleanups, particular in the area of debugging and cookie lifetime handline, to the SCTP protocol code. From Daniel Borkmann. 11) Allow packets to cross network namespaces when traversing tunnel devices. From Nicolas Dichtel. 12) Allow monitoring netlink traffic via AF_PACKET sockets, in a manner akin to how we monitor real network traffic via ptype_all. From Daniel Borkmann. 13) Several bug fixes and improvements for the new alx device driver, from Johannes Berg. 14) Fix scalability issues in the netem packet scheduler's time queue, by using an rbtree. From Eric Dumazet. 15) Several bug fixes in TCP loss recovery handling, from Yuchung Cheng. 16) Add support for GSO segmentation of MPLS packets, from Simon Horman. 17) Make network notifiers have a real data type for the opaque pointer that's passed into them. Use this to properly handle network device flag changes in arp_netdev_event(). From Jiri Pirko and Timo Teräs. 18) Convert several drivers over to module_pci_driver(), from Peter Huewe. 19) tcp_fixup_rcvbuf() can loop 500 times over loopback, just use a O(1) calculation instead. From Eric Dumazet. 20) Support setting of explicit tunnel peer addresses in ipv6, just like ipv4. From Nicolas Dichtel. 21) Protect x86 BPF JIT against spraying attacks, from Eric Dumazet. 22) Prevent a single high rate flow from overruning an individual cpu during RX packet processing via selective flow shedding. From Willem de Bruijn. 23) Don't use spinlocks in TCP md5 signing fast paths, from Eric Dumazet. 24) Don't just drop GSO packets which are above the TBF scheduler's burst limit, chop them up so they are in-bounds instead. Also from Eric Dumazet. 25) VLAN offloads are missed when configured on top of a bridge, fix from Vlad Yasevich. 26) Support IPV6 in ping sockets. From Lorenzo Colitti. 27) Receive flow steering targets should be updated at poll() time too, from David Majnemer. 28) Fix several corner case regressions in PMTU/redirect handling due to the routing cache removal, from Timo Teräs. 29) We have to be mindful of ipv4 mapped ipv6 sockets in upd_v6_push_pending_frames(). From Hannes Frederic Sowa. 30) Fix L2TP sequence number handling bugs, from James Chapman." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1214 commits) drivers/net: caif: fix wrong rtnl_is_locked() usage drivers/net: enic: release rtnl_lock on error-path vhost-net: fix use-after-free in vhost_net_flush net: mv643xx_eth: do not use port number as platform device id net: sctp: confirm route during forward progress virtio_net: fix race in RX VQ processing virtio: support unlocked queue poll net/cadence/macb: fix bug/typo in extracting gem_irq_read_clear bit Documentation: Fix references to defunct linux-net@vger.kernel.org net/fs: change busy poll time accounting net: rename low latency sockets functions to busy poll bridge: fix some kernel warning in multicast timer sfc: Fix memory leak when discarding scattered packets sit: fix tunnel update via netlink dt:net:stmmac: Add dt specific phy reset callback support. dt:net:stmmac: Add support to dwmac version 3.610 and 3.710 dt:net:stmmac: Allocate platform data only if its NULL. net:stmmac: fix memleak in the open method ipv6: rt6_check_neigh should successfully verify neigh if no NUD information are available net: ipv6: fix wrong ping_v6_sendmsg return value ...
2013-07-08Merge branches 'af_ib', 'cxgb4', 'misc', 'mlx5', 'ocrdma', 'qib' and 'srp' ↵Roland Dreier
into for-next
2013-07-08IB/uverbs: Use get_unused_fd_flags(O_CLOEXEC) instead of get_unused_fd()Roland Dreier
The macro get_unused_fd() is used to allocate a file descriptor with default flags. Those default flags (0) can be "unsafe": O_CLOEXEC must be used by default to not leak file descriptor across exec(). Replace calls to get_unused_fd() in uverbs with calls to get_unused_fd_flags(O_CLOEXEC). Inheriting uverbs fds across exec() cannot be used to do anything useful. Based on a patch/suggestion from Yann Droneaud <ydroneaud@opteya.com>. Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-08IB/mlx5: Make profile[] static in main.cRoland Dreier
Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-08mlx5: Add driver for Mellanox Connect-IB adaptersEli Cohen
The driver is comprised of two kernel modules: mlx5_ib and mlx5_core. This partitioning resembles what we have for mlx4, except that mlx5_ib is the pci device driver and not mlx5_core. mlx5_core is essentially a library that provides general functionality that is intended to be used by other Mellanox devices that will be introduced in the future. mlx5_ib has a similar role as any hardware device under drivers/infiniband/hw. Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [ Merge in coccinelle fixes from Fengguang Wu <fengguang.wu@intel.com>. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-07iser-target: Ignore non TEXT + LOGOUT opcodes for discoveryNicholas Bellinger
This patch adds a check in isert_rx_opcode() to ignore non TEXT + LOGOUT opcodes when SessionType=Discovery has been negotiated. Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07target: make queue_tm_rsp() return voidJoern Engel
The return value wasn't checked by any of the callers. Assuming this is correct behaviour, we can simplify some code by not bothering to generate it. nab: Add srpt_queue_data_in() + srpt_queue_tm_rsp() nops around srpt_queue_response() void return Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iser-target: Add support for ISCSI_OP_TEXT opcode + payload handlingNicholas Bellinger
This patch adds isert_handle_text_cmd() to handle incoming ISCSI_OP_TEXT PDU processing, along with isert_put_text_rsp() for posting ISCSI_OP_TEXT_RSP ib_send_wr response. It copies ISCSI_OP_TEXT payload using unsolicited payload at &iser_rx_desc->data[0] into iscsi_cmd->text_in_ptr for usage with outgoing isert_put_text_rsp() -> iscsit_build_text_rsp() v2 changes: - Let iscsit_build_text_rsp() determine any extra padding Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iser-target: Rename sense_buf_[dma,len] to pdu_[dma,len]Nicholas Bellinger
Now that these two variables are used for REJECT payloads as well as SCSI response sense payloads, rename them to something that makes more sense. Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iser-target: Add vendor_err debug outputNicholas Bellinger
Add output for ib_wc.vendor_err in isert_cq_[t,r]x_work(), which is useful for debugging future issues. Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-07iser-target: Fix session reset bug with RDMA_CM_EVENT_DISCONNECTEDNicholas Bellinger
This patch addresses a bug where RDMA_CM_EVENT_DISCONNECTED may occur before the connection shutdown has been completed by rx/tx threads, that causes isert_free_conn() to wait indefinately on ->conn_wait. This patch allows isert_disconnect_work code to invoke rdma_disconnect when isert_disconnect_work() process context is started by client session reset before isert_free_conn() code has been reached. It also adds isert_conn->conn_mutex protection for ->state within isert_disconnect_work(), isert_cq_comp_err() and isert_free_conn() code, along with isert_check_state() for wait_event usage. (v2: Add explicit iscsit_cause_connection_reinstatement call during isert_disconnect_work() to force conn reset) Cc: stable@vger.kernel.org # 3.10+ Cc: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-06iscsi-target: Fix ISCSI_OP_SCSI_TMFUNC handling for iserNicholas Bellinger
This patch adds target_get_sess_cmd reference counting for iscsit_handle_task_mgt_cmd(), and adds a target_put_sess_cmd() for the failure case. It also fixes a bug where ISCSI_OP_SCSI_TMFUNC type commands where leaking iscsi_cmd->i_conn_node and eventually triggering an OOPs during struct isert_conn shutdown. Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-06iscsi-target: Fix iscsit_sequence_cmd reject handling for iserNicholas Bellinger
This patch moves ISCSI_OP_REJECT failures into iscsit_sequence_cmd() in order to avoid external iscsit_reject_cmd() reject usage for all PDU types. It also updates PDU specific handlers for traditional iscsi-target code to not reset the session after posting a ISCSI_OP_REJECT during setup. (v2: Fix CMDSN_LOWER_THAN_EXP for ISCSI_OP_SCSI to call target_put_sess_cmd() after iscsit_sequence_cmd() failure) Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-06iscsi-target: Fix iscsit_add_reject* usage for iserNicholas Bellinger
This patch changes iscsit_add_reject() + iscsit_add_reject_from_cmd() usage to not sleep on iscsi_cmd->reject_comp to address a free-after-use usage bug in v3.10 with iser-target code. It saves ->reject_reason for use within iscsit_build_reject() so the correct value for both transport cases. It also drops the legacy fail_conn parameter usage throughput iscsi-target code and adds two iscsit_add_reject_cmd() and iscsit_reject_cmd helper functions, along with various small cleanups. (v2: Re-enable target_put_sess_cmd() to be called from iscsit_add_reject_from_cmd() for rejects invoked after target_get_sess_cmd() has been called) Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-06iser-target: Fix isert_put_reject payload buffer postNicholas Bellinger
This patch adds the missing isert_put_reject() logic to post a outgoing payload buffer to hold the 48 bytes of original PDU header request payload for the rejected cmd. It also fixes ISTATE_SEND_REJECT handling in isert_response_completion() -> isert_do_control_comp() code, and drops incorrect iscsi_cmd_t->reject_comp usage. Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@vger.kernel.org # 3.10+ Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-07-04Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linuxLinus Torvalds
Pull device tree updates from Grant Likely: "This branch contains the following changes: - Removal of CONFIG_OF_DEVICE, it is always enabled by CONFIG_OF - Remove #ifdef from linux/of_platform.h to increase compiler syntax coverage - Bug fix for address decoding on Bimini and js2x powerpc platforms. - miscellaneous binding changes One note on the above. The binding changes going in from all kinds of different trees has gotten rather out of hand. I picked up some during this cycle, but even going though my tree isn't a great fit. Ian Campbell has prototyped splitting the bindings and .dtb files into a separate repository. The plan is to migrate to using that sometime in the next few kernel releases which should get rid of a lot of the churn on binding docs and .dts files" * tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux: of: Fix address decoding on Bimini and js2x machines of: remove CONFIG_OF_DEVICE usb: chipidea: depend on CONFIG_OF instead of CONFIG_OF_DEVICE of: remove of_platform_driver ibmebus: convert of_platform_driver to platform_driver driver core: move to_platform_driver to platform_device.h mfd: DT bindings for the palmas family MFD ARM: dts: omap3-devkit8000: fix NAND memory binding of/base: fix typos of: remove #ifdef from linux/of_platform.h
2013-07-04Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "The usual stuff from trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits) treewide: relase -> release Documentation/cgroups/memory.txt: fix stat file documentation sysctl/net.txt: delete reference to obsolete 2.4.x kernel spinlock_api_smp.h: fix preprocessor comments treewide: Fix typo in printk doc: device tree: clarify stuff in usage-model.txt. open firmware: "/aliasas" -> "/aliases" md: bcache: Fixed a typo with the word 'arithmetic' irq/generic-chip: fix a few kernel-doc entries frv: Convert use of typedef ctl_table to struct ctl_table sgi: xpc: Convert use of typedef ctl_table to struct ctl_table doc: clk: Fix incorrect wording Documentation/arm/IXP4xx fix a typo Documentation/networking/ieee802154 fix a typo Documentation/DocBook/media/v4l fix a typo Documentation/video4linux/si476x.txt fix a typo Documentation/virtual/kvm/api.txt fix a typo Documentation/early-userspace/README fix a typo Documentation/video4linux/soc-camera.txt fix a typo lguest: fix CONFIG_PAE -> CONFIG_x86_PAE in comment ...
2013-07-03drivers: avoid format string in dev_set_nameKees Cook
Calling dev_set_name with a single paramter causes it to be handled as a format string. Many callers are passing potentially dynamic string content, so use "%s" in those cases to avoid any potential accidents, including wrappers like device_create*() and bdi_register(). Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-01IB/srp: Bump driver version and release dateVu Pham
Signed-off-by: Vu Pham <vu@mellanox.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-01IB/srp: Make HCA completion vector configurableBart Van Assche
Several InfiniBand HCAs allow configuring the completion vector per CQ. This allows spreading the workload created by IB completion interrupts over multiple MSI-X vectors and hence over multiple CPU cores. In other words, configuring the completion vector properly not only allows reducing latency on an initiator connected to multiple SRP targets but also allows improving throughput. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-01IB/srp: Maintain a single connection per I_T nexusBart Van Assche
An SRP target is required to maintain a single connection between initiator and target. This means that if the 'add_target' attribute is used to create a second connection to a target, the first connection will be logged out and that the SCSI error handler will kick in. The SCSI error handler will cause the SRP initiator to reconnect, which will cause I/O over the second connection to fail. Avoid such ping-pong behavior by disabling relogins. If reconnecting manually is necessary, that is possible by deleting and recreating an rport via sysfs. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Sebastian Riemer <sebastian.riemer@profitbricks.com> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-07-01IB/srp: Fail I/O fast if target offlineBart Van Assche
If reconnecting failed we know that no command completion will be received anymore. Hence let the SCSI error handler fail such commands immediately. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-27IB/srp: Skip host settle delayBart Van Assche
The SRP initiator implements host reset by reconnecting to the SRP target. That means that communication with the target is possible as soon as host reset finished. Hence skip the host settle delay. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Sebastian Riemer <sebastian.riemer@profitbricks.com> Reviewed-by: Christoph Hellwig <hch@infradead.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-27IB/srp: Avoid skipping srp_reset_host() after a transport errorBart Van Assche
The SCSI error handler assumes that the transport layer is operational if an eh_abort_handler() returns SUCCESS. Hence srp_abort() only should return SUCCESS if sending the ABORT TASK task management function succeeded. This patch avoids the SCSI error handler skipping the srp_reset_host() call after a transport layer error. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-27IB/srp: Fix remove_one crash due to resource exhaustionDotan Barak
If the add_one callback fails during driver load no resources are allocated so there isn't a need to release any resources. Trying to clean the resource may lead to the following kernel panic: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffffa0132331>] srp_remove_one+0x31/0x240 [ib_srp] RIP: 0010:[<ffffffffa0132331>] [<ffffffffa0132331>] srp_remove_one+0x31/0x240 [ib_srp] Process rmmod (pid: 4562, threadinfo ffff8800dd738000, task ffff8801167e60c0) Call Trace: [<ffffffffa024500e>] ib_unregister_client+0x4e/0x120 [ib_core] [<ffffffffa01361bd>] srp_cleanup_module+0x15/0x71 [ib_srp] [<ffffffff810ac6a4>] sys_delete_module+0x194/0x260 [<ffffffff8100b0f2>] system_call_fastpath+0x16/0x1b Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il> Reviewed-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: Sebastian Riemer <sebastian.riemer@profitbricks.com> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-26IB/qib: New transmitter tunning settings for Dell 1.1 backplaneMitko Haralanov
The Dell blade chassis got an updated backplane which requires new transmitter tuning settings. Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-24iscsi/isert-target: Refactor ISCSI_OP_NOOP RX handlingNicholas Bellinger
This patch refactors ISCSI_OP_NOOP handling within iscsi-target in order to handle iscsi_nopout payloads in a transport specific manner. This includes splitting existing iscsit_handle_nop_out() into iscsit_setup_nop_out() and iscsit_process_nop_out() calls, and makes iscsit_handle_nop_out() be only used internally by traditional iscsi socket calls. Next update iser-target code to use new callers and add FIXME for the handling iscsi_nopout payloads. Also fix reject response handling in iscsit_setup_nop_out() to use proper iscsit_add_reject_from_cmd(). v2: Fix uninitialized iscsit_handle_nop_out() payload_length usage (Fengguang) v3: Remove left-over dead code in iscsit_setup_nop_out() (DanC) Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2013-06-24IB/core: Fix error return code in add_port()Wei Yongjun
Fix to return -ENOMEM in the add_port() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-24RDMA/ocrdma: Fix error return code in ocrdma_set_create_qp_rq_cmd()Wei Yongjun
Fix to return -ENOMEM in the alloc dma coherent error case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Add qp_stats debug fileMike Marciniszyn
This adds a seq_file iterator for reporting the QP hash table when the qp_stats file is read. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Add per-context stats interfaceMike Marciniszyn
This patch adds a debugfs stats interface for per kernel contexts packet counts. The code uses the opcode stats count and eliminates the counter in the context. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Convert opcode counters to per-contextMike Marciniszyn
This fix changes the opcode relative counters for receive to per context. Profiling has shown that when mulitple contexts are being used there is a lot of cache activity associated with these counters. The code formerly kept these counters per port, but only provided the interface to read per HCA. This patch converts the read of counters to per HCA and adds the debugfs hooks to be able to read the file as a sequence of opcodes. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Optimize CQ callbacksMike Marciniszyn
The current workqueue implemention has the following performance deficiencies on QDR HCAs: - The CQ call backs tend to run on the CPUs processing the receive queues - The single thread queue isn't optimal for multiple HCAs This patch adds a dedicated per HCA bound thread to process CQ callbacks. Reviewed-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Add dual-rail NUMA awareness for PSM processesRamkrishna Vepa
The driver currently selects a HCA based on the algorithm that PSM chooses, contexts within a HCA or across. The HCA can also be chosen by the user. Either way, this patch assigns a CPU on the NUMA node local to the selected HCA. This patch also tries to select the HCA closest to the NUMA node of the CPU assigned via taskset to PSM process. If this HCA is unusable then another unit is selected based on the algorithm that is currently enforced or selected by PSM - round robin context selection 'within' or 'across' HCA's. Fixed a bug wherein contexts are setup on the NUMA node on which the processes are opened (setup_ctxt()) and not on the NUMA node that the driver recommends the CPU on. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Add optional NUMA affinityRamkrishna Vepa
This patch adds context relative numa affinity conditioned on the module parameter numa_aware. The qib_ctxtdata has an additional node_id member and qib_create_ctxtdata() has an addition node_id parameter. The allocations within the hdr queue and eager queue setup routines now take this additional member and adjust allocations as necesary. PSM will pass the either current numa node or the node closest to the HCA depending on numa_aware. Verbs will always use the node closest to the HCA. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Ramkrishna Vepa <ramkrishna.vepa@intel.com> Signed-off-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Update minor version numberVinit Agnihotri
External PSM repositories have advanced the minor number for a variety of reasons. The driver needs to increase to avoid warnings. Signed-off-by: Vinit Agnihotri <vinit.abhay.agnihotri@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Remove atomic_inc_not_zero() from QP RCUMike Marciniszyn
Follow Documentation/RCU/rcuref.txt guidance in removing atomic_inc_not_zero() from QP RCU implementation. This patch also removes an unneeded synchronize_rcu() in the add path. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-21IB/qib: Add DCA supportMike Marciniszyn
This patch adds DCA cache warming for systems that support DCA. The code uses cpu affinity notification to react to an affinity change from a user mode program like irqbalance and (re-)program the chip accordingly. This notification avoids reading the current cpu on every interrupt. Reviewed-by: Dean Luick <dean.luick@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> [ Add Kconfig dependency on SMP && GENERIC_HARDIRQS to avoid failure to build due to undefined struct irq_affinity_notify. - Roland ] Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/cma: Export AF_IB statisticsSean Hefty
Report AF_IB source and destination addresses through netlink interface. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ucma: Allow user space to specify AF_IB when joining multicastSean Hefty
Allow user space applications to join multicast groups using MGIDs directly. MGIDs may be passed using AF_IB addresses. Since the current multicast join command only supports addresses as large as sockaddr_in6, define a new structure for joining addresses specified using sockaddr_ib. Since AF_IB allows the user to specify the qkey when resolving a remote UD QP address, when joining the multicast group use the qkey value, if one has been assigned. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ucma: Allow user space to pass AF_IB into resolveSean Hefty
Allow user space applications to call resolve_addr using AF_IB. To support sockaddr_ib, we need to define a new structure capable of handling the larger address size. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ucma: Allow user space to bind to AF_IBSean Hefty
Support user space binding to addresses using AF_IB. Since sockaddr_ib is larger than sockaddr_in6, we need to define a larger structure when binding using AF_IB. This time we use sockaddr_storage to cover future cases. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2013-06-20RDMA/ucma: Name changes to indicate only IP addresses supportedSean Hefty
Several commands into the RDMA CM from user space are restricted to supporting addresses which fit into a sockaddr_in6 structure: bind address, resolve address, and join multicast. With the addition of AF_IB, we need to support addresses which are larger than sockaddr_in6. This will be done by adding new commands that exchange address information using sockaddr_storage. However, to support existing applications, we maintain the current commands and structures, but rename them to indicate that they only support IPv4 and v6 addresses. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>