summaryrefslogtreecommitdiffstats
path: root/drivers/iio
AgeCommit message (Collapse)Author
2015-11-05Merge tag 'spi-v4.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
2015-11-04Merge remote-tracking branches 'spi/topic/omap-100k', ↵Mark Brown
'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-27Merge 4.3-rc7 into staging-nextGreg Kroah-Hartman
We want the other staging patches in this branch as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-12iio:light:apds9960 Fix sparse endian warnings.Jonathan Cameron
This patch is a tidy up of warnings from the autobuilder. >> drivers/iio/light/apds9960.c:495:32: sparse: cast to restricted __le16 drivers/iio/light/apds9960.c:635:24: sparse: cast to restricted __le16 >> drivers/iio/light/apds9960.c:672:21: sparse: incorrect type in assignment (different base types) drivers/iio/light/apds9960.c:672:21: expected unsigned short [unsigned] [usertype] buf drivers/iio/light/apds9960.c:672:21: got restricted __le16 [usertype] <noident> Signed-off-by: Jonathan Cameron <jic23@kernel.org> Cc: mranostay@gmail.com Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-12iio:measurement specialties core: Fix endian sparse warnings.Jonathan Cameron
This patch changes various types to the appropriate endian specific versions. Also introduces an additional local variable to avoid a single variable being used for both be and cpu endianness. These aren't bugs as such, but clearing them up does make the code clearer. Warning was: sparse warnings: (new ones prefixed by >>) >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:126:9: sparse: cast to restricted __be32 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:126:9: sparse: cast to restricted __be32 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:126:9: sparse: cast to restricted __be32 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:126:9: sparse: cast to restricted __be32 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:126:9: sparse: cast to restricted __be32 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:126:9: sparse: cast to restricted __be32 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:127:16: sparse: cast to restricted __be32 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:127:16: sparse: cast to restricted __be32 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:127:16: sparse: cast to restricted __be32 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:127:16: sparse: cast to restricted __be32 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:127:16: sparse: cast to restricted __be32 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:127:16: sparse: cast to restricted __be32 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:208:18: sparse: incorrect type in assignment (different base types) drivers/iio/common/ms_sensors/ms_sensors_i2c.c:208:18: expected unsigned short [unsigned] [addressable] [usertype] send_buf drivers/iio/common/ms_sensors/ms_sensors_i2c.c:208:18: got restricted __be16 [usertype] <noident> >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 >> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:216:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:230:18: sparse: incorrect type in assignment (different base types) drivers/iio/common/ms_sensors/ms_sensors_i2c.c:230:18: expected unsigned short [unsigned] [addressable] [usertype] send_buf drivers/iio/common/ms_sensors/ms_sensors_i2c.c:230:18: got restricted __be16 [usertype] <noident> drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 drivers/iio/common/ms_sensors/ms_sensors_i2c.c:239:19: sparse: cast to restricted __be64 Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11iio:dac:m62332: use dynamic scaleHartmut Knaack
Some regulators can supply multiple voltages. To take changing voltages into account, the scale needs to be calculated on every read access. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11iio:dac:m62332: address some style issuesHartmut Knaack
Fix some indentation issues and separate returns by empty lines (IIO style). Also rename the channel mask in _read_raw() to mask. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11iio:dac:m62332: drop unrequired variableHartmut Knaack
A return variable is not required in _write_raw(), and dropping it reduces complexity, as well. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11iio:dac:m62332: use ARRAY_SIZEHartmut Knaack
Make use of ARRAY_SIZE to prevent buffer issues. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11iio:dac:m62332: shutdown on removeHartmut Knaack
The regulator framework requests to balance regulator_enable() calls with regulator_disable() calls. To meet this requirement, set channels to 0 on remove, which implies a regulator_disable() call in case that channel was enabled. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11iio:dac:m62332: share scale and offsetHartmut Knaack
This device simply uses its Vcc as reference voltage, so the same scale applies for all channels. Also offset doesn't appear to be different for any channel. Represent this by switching these two attributes to info_mask_shared_by_type. Signed-off-by: Hartmut Knaack <knaack.h@gmx.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11iio: hdc100x: correct IIO_CHAN_INFO_OFFSET valueMatt Ranostay
Previous offset wasn't applied in the correct order and invalid. This patchset fixes this issue, and also has the correct scale value applied to the offset. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11Add ms8607 meas-spec driver supportLudovic Tancerel
Support for MS8607 temperature, pressure & humidity sensor. This part is using functions from MS5637 for temperature and pressure and HTU21 for humidity Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11Add ms5637 meas-spec driver supportLudovic Tancerel
Support for MS5637 temperature & pressure sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11Add htu21 meas-spec driver supportLudovic Tancerel
Support for HTU21 temperature & humidity sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-11Add tsys02d meas-spec driver supportLudovic Tancerel
Support for TSYS02D temperature sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-04Add tsys01 meas-spec driver supportLudovic Tancerel
Support for TSYS01 temperature sensor Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-04Add meas-spec sensors common partLudovic Tancerel
Measurement specialties drivers common part. These functions are used by further drivers in the patchset: TSYS01, TSYS02D, HTU21, MS5637, MS8607 Signed-off-by: Ludovic Tancerel <ludovic.tancerel@maplehightech.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: bmc150: Add SPI driverMarkus Pargmann
Add a simple SPI driver which initializes the spi regmap for the bmc150 core driver. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: bmc150: Split the driver into core and i2cMarkus Pargmann
Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: bcm150: Remove i2c_client from private dataMarkus Pargmann
i2c_client struct is now only used for debugging output. We can use the device struct as well so we can remove all struct i2c_client usage. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: bmc150: Use i2c regmapMarkus Pargmann
This replaces all usage of direct i2c accesses with regmap accesses. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Tested-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: remove gpio interrupt probing from drivers that use a single interruptOctavian Purdila
Commit 845c877009cf014b ("i2c / ACPI: Assign IRQ for devices that have GpioInt automatically") automatically assigns the first ACPI GPIO interrupt in client->irq, so we can remove the probing code from drivers that use only one interrupt. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: fix drivers that use 0 as a valid IRQ in client->irq (part 2)Octavian Purdila
Since commit dab472eb931bc291 ("i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned") 0 is not a valid i2c client irq anymore, so change all driver's checks accordingly. The same issue occurs when the device is instantiated via device tree with no IRQ, or from the i2c sysfs interface, even before the patch above. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: st_accel: fix interrupt handling on LIS3LV02Linus Walleij
This accelerometer accidentally either emits a DRDY signal or an IRQ signal. Accidentally I activated the IRQ signal as I thought it was analogous to the interrupt generator on other ST accelerometers. This was wrong. After this patch generic_buffer gives a nice stream of accelerometer readings. Fixes: 3acddf74f807778f "iio: st-sensors: add support for lis3lv02d accelerometer" Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: adc: twl4030: Fix ADC[3:6] readingsAdam YH Lee
MADC[3:6] reads incorrect values without these two following changes: - enable the 3v1 bias regulator for ADC[3:6] - configure ADC[3:6] lines as input, not as USB Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-10-03iio: mlx96014: Error checking from positive to negativeCrt Mori
Dan Carpenter reported a static checker report and after his mail I noticed that we actually return from function if positive value is obtained from i2c read. This was remainder from when code was not in separate function (which I changed during the review process). Static checker reported drivers/iio/temperature/mlx90614.c:167 mlx90614_iir_search() warn: this cast is a no-op which meant that cast before negating is useless. Dan also proposed a solution on nicer bit operation form. Also changed magic number to macro in process as that was confusing. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Crt Mori <cmo@melexis.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: mcp4531: Driver for Microchip digital potentiometersPeter Rosin
Add support for Microchip digital potentiometers and rheostats MCP4531, MCP4532, MCP4551, MCP4552 MCP4631, MCP4632, MCP4651, MCP4652 DEVICE Wipers Steps Resistor Opts (kOhm) i2c address MCP4531 1 129 5, 10, 50, 100 010111x MCP4532 1 129 5, 10, 50, 100 01011xx MCP4551 1 257 5, 10, 50, 100 010111x MCP4552 1 257 5, 10, 50, 100 01011xx MCP4631 2 129 5, 10, 50, 100 0101xxx MCP4632 2 129 5, 10, 50, 100 01011xx MCP4651 2 257 5, 10, 50, 100 0101xxx MCP4652 2 257 5, 10, 50, 100 01011xx Datasheet: http://www.microchip.com/downloads/en/DeviceDoc/22096b.pdf Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: lidar: add missing MODULE_DEVICE_TABLE for dtMatt Ranostay
The device tree compatible strings weren't properly registered for the pulsedlight-lidar-lite-v2 driver. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: chemical: vz89x hardware i2c workaroundMatt Ranostay
Chipset sometime updates in the middle of a reading causing it to reset the data pointer, and causing invalid reading of previous data. We can check for this invalid state by reading MSB of the resistance reading that is always zero, and by also confirming the VOC_short isn't zero. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: dac: ad5504: leave sysfs naming to the coreMartin Kepplinger
This shouldn't actually change anything since the core calls the events sysfs folder "events" anyways. Signed-off-by: Martin Kepplinger <martink@posteo.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: adc: max1363: leave sysfs naming to the coreMartin Kepplinger
This shouldn't actually change anything since the core calls the events sysfs folder "events" anyways. Signed-off-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30iio: adc: ad799x: leave sysfs naming to the coreMartin Kepplinger
This shouldn't change anything since the core calls the events folder "events" anyways. Signed-off-by: Martin Kepplinger <martink@posteo.de> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-30Merge tag 'iio-for-4.4a' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Jonathan writes: First round of new driver, new functionality and cleanups for IIO in the 4.4 cycle New device support * APDS9960 ALS + proximity driver * bmg160 SPI devices. * HDC100x humidity sensors * Holt HI-8435 threshold detector * mma8453Q accelerometer added to the mma8452 driver * mma86452FC and mma8653FC accelerometers added to the mma8452 driver * mxc4005 accelerometer * PulsedLight LIDAR * SensorTech VZ89x volatile organic compound sensor * UPISEMI uS5182d ALS and proximity sensors New core functionality * triggered events - use triggers to check for changes in threshold type detectors on devices with out interrupt support. First user is the holt comparator. * chemical concentration and resistance channel types. New driver functionality * vf610 - buffer support. - followup coccinelle warning fix. Core rework * buffers - break out callback buffer to own module. - move buffer implementations to a new subdirectory * percolate the error code form iio_event_getfd out to userspace rather than giving a missleading error later on. Cleanups * adddac drivers - use BIT macro where appropriate. * meter drivers - use BIT macro where appropriate. * ad7303 - add an OF match table to line up with the binding docs. * adc128s052 - add an OF match table to line up with the binding docs. * adf4350 - add an OF match table to line up with the binding docs * as3935 - add an OF match table to line up with the binding docs. * berlin2-adc - use GENMASK and BIT for masks - prevent attempting to sample multiple channels at once by moving a mutex scop - coding style cleanups * bmg150_magn - kconfig sort order was wrong - fix it. * bmg160 - use i2c regmap and drop all uses of i2c_client - separate i2c and core driver * cc10001_adc - kconfig sort order was wrong - fix it. * evgen (dummy driver helper module) - move interrupt generation to irq_work to reduce differences between the dummy driver and real hardware drivers. * hmc5843 - set the name dynamically rather than to a fixed value for one of the suported parts. - export module alias information to allow autoprobing of module. * lpc32xx - on failure to get resource or irq return -ENXIO as uppose to -EBUSY * max1027 - set .of_match_table to actually allow OF style matching. * max5821 - add MODULE_DEVICE_TABLE for OF table. * mma8452 - refactor to separate out chip specific data. - add freefall / motion interrupt source for devices that do their interrupts slightly differently. - update copywrite notice. - leave naming of events directory in sysfs to the core * mcp320x - set .of_match_table so that it can be use for OF style matching. * mlx90614 - Implement filter configuration (note the datasheet changed as a result of the driver reviews to include the values we needed ;) * opt3001 - drop .owner field as assigned by platform driver core. * si7020 - replace a bitmask on the humidity values with a more correct range check. * stk310 - improved error handling. - use BIT macro where appropriate and use the resulting defines instead of magic numbers in the code. - fix indentation * st-sensors - add debugfs register read hook * tsl4531 - fix error handling in check_id * twl6030 - fix module autoload for OF * iio-trig-sysfs - document add and remove attribute * trigger in staging - code alignment fixes. - braces on both branches of if statement if needed for one. * xilinx-xadc - push interrupts into hardirq context as there isn't much in them any more and it avoids breaking PREEMPT_RT builds due to the use of a spinlock between the hardirq and the thread. Tools * event-monitor - report unsupported events. We keep expanding what can come from drivers so give a helpful error if one turns up in an out of date userspace program. * generic-buffer - helpful message about needing to enable a channel to start the buffer.
2015-09-23iio: light: apds9960: fix platform_no_drv_owner.cocci warningskbuild test robot
drivers/iio/light/apds9960.c:1125:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: apds9960: light: fix simple_return.cocci warningskbuild test robot
drivers/iio/light/apds9960.c:986:1-4: WARNING: end returns can be simpified Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci CC: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: adc: vf610: fix simple_return.cocci warningskbuild test robot
drivers/iio/adc/vf610_adc.c:766:1-4: WARNING: end returns can be simpified and declaration on line 755 can be dropped Simplify a trivial if-return sequence. Possibly combine with a preceding function call. Generated by: scripts/coccinelle/misc/simple_return.cocci CC: Sanchayan Maity <maitysanchayan@gmail.com> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: light: Add support for UPISEMI uS5182d als and proximity sensorAdriana Reus
Add support for UPISEMI us5182d als and proximity sensor. Supports raw readings. Data sheet for this device can be found here: http://www.upi-semi.com/temp/uS5182D-DS-P0103-temp.pdf Signed-off-by: Adriana Reus <adriana.reus@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: chemical: add SGX VZ89x VOC sensor supportMatt Ranostay
Add support for VZ89X sensors VOC and CO2 reporting channels in percentage which can be converted to part per million. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: resistance: add IIO_RESISTANCE channel typeMatt Ranostay
Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: chemical: Add IIO_CONCENTRATION channel typeMatt Ranostay
There are air quality sensors that report data back in parts per million of VOC (Volatile Organic Compounds) which are usually indexed from CO2 or another common pollutant. This patchset adds an IIO_CONCENTRATION type that returns a percentage of substance because no other channels types fit this use case. Modifiers for IIO_MOD_CO2 and IIO_MOD_VOC gas types are defined. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: adc: twl6030-gpadc: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: dac: max5821: Fix module autoload for OF platform driverLuis de Bethencourt
This platform driver has a OF device ID table but the OF module alias information is not created so module autoloading won't work. Signed-off-by: Luis de Bethencourt <luisbg@osg.samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: mma8452: leave sysfs namings to the iio coreMartin Kepplinger
This doesn't actually change anything since the core names the sysfs folder for the iio event attributes "events" anyways. It only leaves the job to the core. Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: mma8452: add copyright notice commentMartin Kepplinger
Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: mma8452: add support for MMA8652FC and MMA8653FCMartin Kepplinger
MMA8652FC and MMA8653FC don't provide the transient interrupt source, so the motion interrupt source is used by providing a new iio_chan_spec definition, so that other supported devices are not affected by this. Datasheets for the newly supported devices are available at Freescale's website: http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8652FC.pdf http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8653FC.pdf Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: mma8452: add freefall / motion interrupt sourceMartin Kepplinger
This adds the freefall / motion interrupt source definitions to the driver. It is used in this series' next patch, for chips that don't support the transient interrupt source. Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: mma8452: add support for MMA8453Q accelerometer chipMartin Kepplinger
This adds support for the 10 bit version if Freescale's accelerometers of this series. The datasheet is available at Freescale's website: http://cache.freescale.com/files/sensors/doc/data_sheet/MMA8453Q.pdf It creates a devicetree bindings file to document the new functionality and removes the driver from the trivial-devices list. Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-09-23iio: mma8452: refactor for seperating chip specific dataMartin Kepplinger
This adds a struct mma_chip_info to hold data that will remain specific to the chip in use. It is provided during probe() and linked in struct of_device_id. Also this suggests that the driver is called "mma8452" and now handles the MMA8452Q device, but is not limited to it. Signed-off-by: Martin Kepplinger <martin.kepplinger@theobroma-systems.com> Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-12 00:46:41 +0000