| Age | Commit message (Collapse) | Author |
|---|
|
rockchip_saradc_resume
Fix the missing clk_disable_unprepare() of info->pclk
before return from rockchip_saradc_resume in the error
handling case when fails to prepare and enable info->clk.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Fixes: 44d6f2ef94f9 ("iio: adc: add driver for Rockchip saradc")
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201103120743.110662-1-miaoqinglang@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
One of a class of bugs pointed out by Lars in a recent review.
iio_push_to_buffers_with_timestamp() assumes the buffer used is aligned
to the size of the timestamp (8 bytes). This is not guaranteed in
this driver which uses an array of smaller elements on the stack.
As Lars also noted this anti pattern can involve a leak of data to
userspace and that indeed can happen here. We close both issues by
moving to a suitable structure in the iio_priv() data with alignment
explicitly requested. This data is allocated with kzalloc() so no
data can leak apart from previous readings.
In this driver the timestamp can end up in various different locations
depending on what other channels are enabled. As a result, we don't
use a structure to specify it's position as that would be misleading.
Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-9-jic23@kernel.org
|
|
The buffer is expressed as a u32 array, yet the extra space for
the s64 timestamp was expressed as sizeof(s64)/sizeof(u16).
This will result in 2 extra u32 elements.
Fix by dividing by sizeof(u32).
Fixes: e717f8c6dfec ("iio: adc: Add the TI ads124s08 ADC code")
Signed-off-by: Jonathan Cameron<Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Dan Murphy <dmurphy@ti.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200920112742.170751-8-jic23@kernel.org
|
|
By adding a few local variables and avoiding a void * for
a parameter we can easily make all the endian types explicit and
get rid of the warnings from sparse:
CHECK drivers/iio/adc/ti-adc084s021.c
drivers/iio/adc/ti-adc084s021.c:84:26: warning: incorrect type in assignment (different base types)
drivers/iio/adc/ti-adc084s021.c:84:26: expected unsigned short [usertype]
drivers/iio/adc/ti-adc084s021.c:84:26: got restricted __be16
drivers/iio/adc/ti-adc084s021.c:115:24: warning: cast to restricted __be16
drivers/iio/adc/ti-adc084s021.c:115:24: warning: cast to restricted __be16
drivers/iio/adc/ti-adc084s021.c:115:24: warning: cast to restricted __be16
drivers/iio/adc/ti-adc084s021.c:115:24: warning: cast to restricted __be16
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200722155103.979802-23-jic23@kernel.org
|
|
As we no longer support a try again if we cannot reenable the trigger
rename the function to reflect this. Also we don't do anything with
the value returned so stop it returning anything. For the few drivers
that didn't already print an error message in this patch, add such
a print.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Christian Oder <me@myself5.de>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: Nishant Malpani <nish.malpani25@gmail.com>
Cc: Daniel Baluta <daniel.baluta@oss.nxp.com>
Link: https://lore.kernel.org/r/20200920132548.196452-3-jic23@kernel.org
|
|
at91_adc_probe_dt is now small enough to be merged back in at91_adc_probe.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-8-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move the available trigger definition back in the driver to stop cluttering
the device tree. There is no functional change except that it actually
fixes the available triggers for at91sam9rl as it inherited the list from
at91sam9260 but actually has the triggers from at91sam9x5.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-6-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Move the possible resolution values back to the driver. This removes the
atmel,adc-res and atmel,adc-res-names properties, leaving only
atmel,adc-use-res. As atmel,adc-res-names had to contain "lowres" and
"highres", those where already the only allowed values for
atmel,adc-use-res.
Also introduce a new compatible string for the sama5d3 as this is the only
one with a different resolution. Also it doesn't even have the LOWRES
bit.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-3-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The driver is DT only since commit ead1c9f376db ("iio: adc: at91_adc:
remove platform data and move defs in driver file"). Remove the leftover
platform_device_id array.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20201128222818.1910764-2-alexandre.belloni@bootlin.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Use a heap allocated memory for the SPI transfer buffer. Using stack memory
can corrupt stack memory when using DMA on some systems.
This change moves the buffer from the stack of the trigger handler call to
the heap of the buffer of the state struct. The size increases takes into
account the alignment for the timestamp, which is 8 bytes.
The 'data' buffer is split into 'tx_buf' and 'rx_buf', to make a clearer
separation of which part of the buffer should be used for TX & RX.
Fixes: af3008485ea03 ("iio:adc: Add common code for ADI Sigma Delta devices")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201124123807.19717-1-alexandru.ardelean@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
'st->ext_ref' & 'st->reg' are both non-zero/non-null at the same time, so
logically the code isn't broken.
But it is more correct to check that 'st->reg' is non-null, since we make
sure that the regulator is NULL (in probe) in case one isn't defined.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201127094038.91714-2-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This change converts the probe of this driver to use device-managed
register functions, and a devm_add_action_or_reset() for the regulator
disable.
With this, the exit & error paths can be removed.
Another side-effect is that this should avoid some static-analyzer's check
with respect to a potential null dereference of the regulator. The null
dereference isn't likely to happen (under normal operation), so there isn't
a requirement to have this fixed/backported in other releases.
As a note: this is removing spi_set_drvdata() since there is no other
spi_get_drvdata() (or dev_get_drvdata()) call that need it.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201127094038.91714-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
First set of new device support, features and cleanups for IIO in the 5.11 cycle
Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.
Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).
Listed by manufacturer
- dht11 temperature(drop)
- adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
adi,adis16480 adi,adf4350
- ams,as3935
- asahi-kasei,ak8974
- atmel,sama5d2-adc
- avago,apds9300 avago,apds9960
- bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
- brcm,iproc-static-adc
- capella,cm36651
- domintech,dmard06(drop)
- fsl,mag3110 fsl,mma8452 fsl,vf610-dac
- hoperf,hp03
- honeywell,hmc5843
- kionix,kxcjk1013
- maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
maxim,max31856 maxim,max31855k maxim,max44009
maxim,max5481 maxim,max5821
- meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
- mediatek,mt2701-auxadc
- melexis,mlx90614 melexis,mlx90632
- memsic,mmc35240(drop)
- microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
- murata,zap2326
- nxp,fxas21002c nxp,lpc1850-dac
- pni,rm3100
- qcom,pm8018-adc qcom,spmi-iadc
- renesas,isl29501 renesas,rcar-gyroadc
- samsung,sensorhub-rinato
- sensiron,sgp30
- sentech,sx9500
- sharp,gp2ap020a00f
- st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
- ti,adc084s021 ti,ads124s08
ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
- upisemi,us51882
- vishay,vcnl4035
- x-powers,axp209
New device support
* adi,ad5685
- Add support for AD5338R dual output 10-bit DAC
- Add DT-binding doc.
* mediatek,mt6360
- New driver for this SoC ADC with bindings and using new channel label
support in the IIO core.
* st,lsm6dsx
- Add support for LSM6DST
Core:
* Add "label" to device channels, provided via a new core callback. Including
DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup
Features
* semtech,sx9310
- Add control of hardware gain, proximity thresholds, hysteresis and
debounce.
- Increase what information on hardware configuration can be provided
via DT.
Cleanup and minor features
* adi,ad5685
- Add of_match_table
* adi,ad7292
- Drop pointless spi_set_drvdata() call
* adi,ad7298
- Drop platform data and tidy up external reference config.
* adi,ad7303
- Drop platform data handling as unused.
* adi,ad7768
- Add new label attribute for channels provided from dt.
* adi,ad7887
- devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
- Drop pointless spi_set_drvdata() call
* adi,adis16209
- Drop pointless spi_set_drvdata() call
* adi,adis16240
- White space fixup
* adi,adxl372
- use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
- Drop pointless semicolon.
* amstaos,tsl2563
- Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
- Use of_device_get_match_data() instead of open coding it.
- Constify some driver data
- Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
- Drop platform data as mostly dead code.
- Tidy up reference voltage logic
* atmel-sama5d2
- Drop a pointless semicolon
- Merge buffer and trigger init into a separate function
- Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
- Drop a pointless semicolon
* bosch,bmc150
- Drop a pointless semicolon
- Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
- Drop a pointless semicolon
* fsl,mma8452
- Constification
* (google),cros_ec
- Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
- Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
- Drop a pointless semicolon
* invensense,icm426xx
- Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
- Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
- Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
- Stop relying on users counter form input device in ISR.
* st,lsm6dsx
- add vdd and vddio regulator control (including binding update)
* st,stm32-adc
- Tidy up code for dma transfers.
- Adapt clock duty cycle for proper functioning. Note no known problems
with existing boards.
* st,vl53l0x-i2c
- Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
- Put back i2c_device_id table as needed for greybus probing.
* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
...
|
|
This seems to have been copied from a driver that calls spi_set_drvdata()
but doesn't call spi_get_drvdata().
Setting a private object on the SPI device's object isn't necessary if it
won't be accessed.
This change removes the spi_set_drvdata() call.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Tested-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Reviewed-by: Marcelo Schmitt <marcelo.schmitt1@gmail.com>
Link: https://lore.kernel.org/r/20201119142720.86326-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning
by explicitly adding a break statement instead of letting the code fall
through to the next case.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/b3c1c3f9c76f2f0e832f956587f227e44af57d3d.1605896060.git.gustavoars@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This change switches to the new devm_iio_triggered_buffer_setup_ext()
function and removes the iio_buffer_set_attrs() call, for assigning the
HW FIFO attributes to the buffer.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200929125949.69934-7-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This change is mostly cosmetic, but it's also a pre-cursor to the
the change for 'iio_buffer_set_attrs()', where the helper gets updated to
better support multiple IIO buffers for 1 IIO device.
The only functional change is that the error message for the trigger alloc
failure is bound to the parent device vs the IIO device object.
Also, the new at91_adc_buffer_and_trigger_init() function was moved after
the definition of the 'at91_adc_fifo_attributes'.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20200929125949.69934-3-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This is conversion of the driver to use device-managed functions.
The IIO registration and triggered buffer setup both have device-managed
versions.
The regulator disable needs to be handled via an action_or_reset handler.
With these changes, the remove hook is removed, and the error path is
cleaned up in probe.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201113091648.148589-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
For proper operation, STM32 ADC should be used with a clock duty cycle
of 50%, in the range of 49% to 51%. Depending on the clock tree, divider
can be used in case clock duty cycle is out of this range.
In case clk_get_scaled_duty_cycle() returns an error, kindly apply a
divider by default (don't make the probe fail).
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Link: https://lore.kernel.org/r/1604681846-31234-1-git-send-email-fabrice.gasnier@st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add MT6360 ADC driver including Charger Current, Voltage, and
Temperature.
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Link: https://lore.kernel.org/r/1603181267-15610-4-git-send-email-gene.chen.richtek@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
- Remove processing related to DMA in irq handler as this
data transfer is managed directly in DMA callback.
- Update comment in stm32_adc_set_watermark() function.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Link: https://lore.kernel.org/r/20201105142941.27301-1-olivier.moysan@st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
For better identification of the channels.
Signed-off-by: Cristian Pop <cristian.pop@analog.com>
Link: https://lore.kernel.org/r/20200928090959.88842-3-cristian.pop@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When the command feature of the ADC is used, it is possible to program
the ADC, and specify at each step what input should be processed, and in
comparison to what reference.
This broke the AUX and battery readings when the touchscreen was
enabled, most likely because the CMD feature would change the VREF all
the time.
Now, when AUX or battery are read, we temporarily disable the CMD
feature, which means that we won't get touchscreen readings in that time
frame. But it now gives correct values for AUX / battery, and the
touchscreen isn't disabled for long enough to be an actual issue.
Fixes: b96952f498db ("IIO: Ingenic JZ47xx: Add touchscreen mode.")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201103201238.161083-1-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The reference voltage for the battery is clearly marked as 1.2V in the
programming manual. With this fixed, the battery channel now returns
correct values.
Fixes: a515d6488505 ("IIO: Ingenic JZ47xx: Add support for JZ4770 SoC ADC.")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Artur Rojek <contact@artur-rojek.eu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201104192843.67187-1-paul@crapouillou.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Since overrun interrupt support has been added, there's a regression when
two ADCs are used at the same time, with:
- an ADC configured to use IRQs. EOCIE bit is set. The handler is normally
called in this case.
- an ADC configured to use DMA. EOCIE bit isn't set. EOC triggers the DMA
request. It's then automatically cleared by DMA read. But the handler
gets called due to status bit is temporarily set (IRQ triggered by the
other ADC).
This is a regression as similar issue had been fixed earlier by
commit dcb10920179a ("iio: adc: stm32-adc:
fix a race when using several adcs with dma and irq").
Issue is that stm32_adc_eoc_enabled() returns non-zero value (always)
since OVR bit has been added and enabled for both DMA and IRQ case.
Remove OVR mask in IER register, and rely only on CSR status for overrun.
To avoid subsequent calls to interrupt routine on overrun, CSR OVR bit has
to be cleared. CSR OVR bit cannot be cleared directly by software.
To do this ADC must be stopped first, and OVR bit in ADC ISR has
to be cleared.
Also add a check in ADC IRQ handler to report spurious IRQs.
Fixes: cc06e67d8fa5 ("iio: adc: stm32-adc: Add check on overrun interrupt")
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201021085313.5335-1-olivier.moysan@st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A break is not needed if it is preceded by a return
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20201019172824.32166-1-trix@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
dev_comp field is used in a couple of places but it is never set. This
results in kernel oops when dereferencing a NULL pointer. Set the
`dev_comp` field correctly in the probe function.
Fixes: 6d97024dce23 ("iio: adc: mediatek: mt6577-auxadc, add mt6765 support")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201018194644.3366846-1-fparent@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201027200853.1596699-1-trix@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201027201128.1597230-1-trix@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The amount of changes is smaller at this round (what a surprise), but
lots of activity is seen. Most of changes are about ASoC driver
development, especially Intel platforms. Here are some highlights:
General:
- Replace all tasklet usages with other alternatives
- Cleanup of the ASoC error unwinding code
- Fixes for trivial issues caught by static checker
- Spell fixes allover the places
ALSA Core:
- Lockdep fix for control devices
- Fix for potential OSS sequencer mutex stalls
HD-audio and USB-audio:
- SoundBlaster AE-7 support
- Changes in quirk table for the rename handling
- Quirks for HP and ASUS machines, Pioneer DJ DJM-250MK2.
ASoC:
- Lots of updates for Intel SOF and SoundWire enablement
- Replacement of the DSP driver for some older x86 systems; the new
code was written from scratch, better maintenance expected
- Helpers for parsing auxiluary devices from the device tree
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764"
* tag 'sound-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (498 commits)
ALSA: hda/hdmi: fix incorrect locking in hdmi_pcm_close
ALSA: hda: fix jack detection with Realtek codecs when in D3
ALSA: fireworks: use semicolons rather than commas to separate statements
ALSA: hda: use semicolons rather than commas to separate statements
ALSA: hda/i915 - fix list corruption with concurrent probes
ASoC: dmaengine: Document support for TX only or RX only streams
ASoC: mchp-spdiftx: remove 'TX' from playback stream name
ASoC: ti: davinci-mcasp: Use &pdev->dev for early dev_warn
ASoC: tas2764: Add the driver for the TAS2764
dt-bindings: tas2764: Add the TAS2764 binding doc
ASoC: Intel: catpt: Add explicit DMADEVICES kconfig dependency
ASoC: Intel: catpt: Fix compilation when CONFIG_MODULES is disabled
ASoC: stm32: dfsdm: add actual resolution trace
ASoC: stm32: dfsdm: change rate limits
ASoC: qcom: sc7180: Add support for audio over DP
Asoc: qcom: lpass-platform : Increase buffer size
ASoC: qcom: Add support for lpass hdmi driver
Asoc: qcom: lpass:Update lpaif_dmactl members order
Asoc:qcom:lpass-cpu:Update dts property read API
ASoC: dt-bindings: Add dt binding for lpass hdmi
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the large set of staging and IIO driver updates for 5.10-rc1.
Included in here are:
- new IIO drivers
- new IIO driver frameworks
- various IIO driver fixes and updates
- IIO device tree conversions to yaml
- so many minor staging driver coding style cleanups
- most cdev driver moved out of staging
- no staging drivers added or removed
Full details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (476 commits)
staging: comedi: check validity of wMaxPacketSize of usb endpoints found
staging: wfx: improve robustness of wfx_get_hw_rate()
staging: wfx: drop unicode characters from strings
staging: wfx: gpiod_get_value() can return an error
staging: wfx: increase robustness of hif_generic_confirm()
staging: wfx: wfx_init_common() returns NULL on error
staging: wfx: standardize the error when vif does not exist
staging: wfx: check memory allocation
staging: wfx: improve error handling of hif_join()
staging: dpaa2-switch: add a dpaa2_switch prefix to all functions in ethsw.c
staging: dpaa2-switch: add a dpaa2_switch_ prefix to all functions in ethsw-ethtool.c
staging: rtl8188eu: Fix long lines
dt-bindings: staging: wfx: silabs,wfx yaml conversion
staging: wfx: update copyrights dates
staging: wfx: fix QoS priority for slow buses
staging: wfx: fix BA sessions for older firmwares
staging: wfx: remove remaining code of 'secure link' feature
staging: wfx: fix handling of MMIC error
staging: vchiq: Fix list_for_each exit tests
staging: greybus: use __force when assigning __u8 value to snd_ctl_elem_type_t
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 5.10-rc1
They include a lot of different things, all related to the driver core
and/or some driver logic:
- sysfs common write functions to make it easier to audit sysfs
attributes
- device connection cleanups and fixes
- devm helpers for a few functions
- NOIO allocations for when devices are being removed
- minor cleanups and fixes
All have been in linux-next for a while with no reported issues"
* tag 'driver-core-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (31 commits)
regmap: debugfs: use semicolons rather than commas to separate statements
platform/x86: intel_pmc_core: do not create a static struct device
drivers core: node: Use a more typical macro definition style for ACCESS_ATTR
drivers core: Use sysfs_emit for shared_cpu_map_show and shared_cpu_list_show
mm: and drivers core: Convert hugetlb_report_node_meminfo to sysfs_emit
drivers core: Miscellaneous changes for sysfs_emit
drivers core: Reindent a couple uses around sysfs_emit
drivers core: Remove strcat uses around sysfs_emit and neaten
drivers core: Use sysfs_emit and sysfs_emit_at for show(device *...) functions
sysfs: Add sysfs_emit and sysfs_emit_at to format sysfs output
dyndbg: use keyword, arg varnames for query term pairs
driver core: force NOIO allocations during unplug
platform_device: switch to simpler IDA interface
driver core: platform: Document return type of more functions
Revert "driver core: Annotate dev_err_probe() with __must_check"
Revert "test_firmware: Test platform fw loading on non-EFI systems"
iio: adc: xilinx-xadc: use devm_krealloc()
hwmon: pmbus: use more devres helpers
devres: provide devm_krealloc()
syscore: Use pm_pr_dbg() for syscore_{suspend,resume}()
...
|
|
This change removes the old platform data for ad7298. It is only used to
provide whether to use an external regulator as a reference.
So, the logic is inverted a bit. The driver now tries to obtain a
regulator. If one is provided, then the external ref is used. The rest of
the logic should work as before.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201001141048.69050-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The order in which 'users' counter is decremented vs calling drivers'
close() method is implementation specific, and we should not rely on
it. Let's introduce driver private flag and use it to signal ISR
to exit when device is being closed.
This has a side-effect of fixing issue of accessing inut->users
outside of input->mutex protection.
Reported-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201006215509.GA2556081@dtor-ws
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This change inverts/reworks the logic to use an external reference via a
provided regulator.
Now the driver tries to obtain a regulator. If one is found, then it is
used. The rest of the driver logic already checks if there is a non-NULL
reference to a regulator, so it should be fine.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201002082723.184810-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AT91 ADC driver no longer uses the 'at91_add_device_adc' platform data
type. This is no longer used (at least in mainline boards).
This change removes the platform-data initialization from the driver, since
it is mostly dead code now.
Some definitions [from the platform data at91_adc.h include] have been
moved in the driver, since they are needed in the driver.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200930135048.11530-5-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This tries to solve a warning reported by the lkp bot:
>> drivers/iio/adc/at91_adc.c:1439:34: warning: unused variable
>> 'at91_adc_dt_ids' [-Wunused-const-variable]
static const struct of_device_id at91_adc_dt_ids[] = {
^
1 warning generated.
This warning has appeared after the AT91_ADC driver compilation has been
enabled via the COMPILE_TEST symbol dependency.
The warning is caused by the 'of_match_ptr()' helper which returns NULL if
OF is undefined. This driver should build only for device-tree context, so
a dependency on the OF Kconfig symbol has been added.
Also, the usage of of_match_ptr() helper has been removed since it
shouldn't ever return NULL (because the driver should not be built for the
non-OF context).
Fixes: 4027860dcc4c ("iio: Kconfig: at91_adc: add COMPILE_TEST dependency to driver")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200930135048.11530-4-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The main intent is to get rid of the cast for the void-pointer returned by
of_device_get_match_data().
This requires const-ifying the 'caps' and 'registers' references on the
at91_adc_state struct.
The caps can be obtained also from the old platform_data (in the
at91_adc_probe_pdata() function), but that cast is not touched in this
patch, since the old platform_data should be removed/cleaned-away.
Also, that cast deals with converting a kernel_ulong_t type to a pointer.
So, updating that cast doesn't yield any benefit.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200930135048.11530-3-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
This is a small tidy-up. The of_device_get_match_data() helper retrieves
the driver data from the OF table, without needed to explicitly know the
table variable (since it can retrieve it from the driver object).
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20200930135048.11530-2-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
|
|
Add a trace to report actual resolution of audio samples.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20201007153459.22155-3-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We need the IIO fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add missing of_node_put calls when exiting the for_each_child_of_node
loop in rcar_gyroadc_parse_subdevs early.
Also add goto-exception handling for the error paths in that loop.
Fixes: 059c53b32329 ("iio: adc: Add Renesas GyroADC driver")
Signed-off-by: Tobias Jordan <kernel@cdqe.de>
Link: https://lore.kernel.org/r/20200926161946.GA10240@agrajag.zerfleddert.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When the ADC is runtime suspended and starting a conversion, the stm32-adc
driver calls pm_runtime_get_sync() that gets cascaded to the parent
(e.g. runtime resume of stm32-adc-core driver). This also kicks the
autosuspend delay (e.g. 2s) of the parent.
Once the ADC is active, calling pm_runtime_get_sync() again (upon a new
capture) won't kick the autosuspend delay for the parent (stm32-adc-core
driver) as already active.
Currently, this makes the stm32-adc-core driver go in suspend state
every 2s when doing slow polling. As an example, doing a capture, e.g.
cat in_voltageY_raw at a 0.2s rate, the auto suspend delay for the parent
isn't refreshed. Once it expires, the parent immediately falls into
runtime suspended state, in between two captures, as soon as the child
driver falls into runtime suspend state:
- e.g. after 2s, + child calls pm_runtime_put_autosuspend() + 100ms
autosuspend delay of the child.
- stm32-adc-core switches off regulators, clocks and so on.
- They get switched on back again 100ms later in this example (at 2.2s).
So, use runtime_idle() callback in stm32-adc-core driver to call
pm_runtime_mark_last_busy() for the parent driver (stm32-adc-core),
to avoid this.
Fixes: 9bdbb1139ca1 ("iio: adc: stm32-adc: add power management support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/1593615328-5180-1-git-send-email-fabrice.gasnier@st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
After the move of the postenable code to preenable, the DMA start was
done before the DMA init, which is not correct.
The DMA is initialized in set_watermark. Because of this, we need to call
the DMA start functions in set_watermark, after the DMA init, instead of
preenable hook, when the DMA is not properly setup yet.
Fixes: f3c034f61775 ("iio: at91-sama5d2_adc: adjust iio_triggered_buffer_{predisable,postenable} positions")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Link: https://lore.kernel.org/r/20200923121748.49384-1-eugen.hristev@microchip.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
When returning or breaking early from a
`for_each_available_child_of_node()` loop, we need to explicitly call
`of_node_put()` on the child node to possibly release the node.
Fixes: 506d2e317a0a0 ("iio: adc: Add driver support for AD7292")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200925091045.302-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The AD9265 is a 16-bit, 125 MSPS analog-to-digital converter (ADC). The
AD9265 is designed to support communications applications where high
performance combined with low cost, small size, and versatility is
desired.
The ADC core features a multistage, differential pipelined architecture
with integrated output error correction logic to provide 16-bit accuracy at
125 MSPS data rates and guarantees no missing codes over the full operating
temperature range.
The ADC features a wide bandwidth differential sample-and-hold analog input
amplifier supporting a variety of user-selectable input ranges. It is
suitable for multiplexed systems that switch full-scale voltage levels in
successive channels and for sampling single-channel inputs at frequencies
well beyond the Nyquist rate. Combined with power and cost savings over
previously available ADCs, the AD9265 is suitable for applications in
communications, instrumentation and medical imaging.
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9434.pdf
The driver supports the same register set as the AD9467, so the support for
this chip is added to the 'ad9467' driver.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200924080518.96410-4-alexandru.ardelean@analog.com
|
|
The AD9434 is a 12-bit monolithic sampling analog-to-digital converter
(ADC) optimized for high performance, low power, and ease of use. The part
operates at up to a 500 MSPS conversion rate and is optimized for
outstanding dynamic performance in wideband carrier and broadband systems.
All necessary functions, including a sample-and-hold and voltage reference,
are included on the chip to provide a complete signal conversion solution.
The VREF pin can be used to monitor the internal reference or provide an
external voltage reference (external reference mode must be enabled through
the SPI port).
The ADC requires a 1.8 V analog voltage supply and a differential clock
for full performance operation. The digital outputs are LVDS (ANSI-644)
compatible and support twos complement, offset binary format, or Gray code.
A data clock output is available for proper output data timing.
Link: https://www.analog.com/media/en/technical-documentation/data-sheets/AD9434.pdf
The driver supports the same register set as the AD9467, so the support for
this chip is added to the 'ad9467' driver.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200924080518.96410-3-alexandru.ardelean@analog.com
|
|
There are 2 chip constants that can be added to the chip-info part. The
default output-mode and the VREF mask.
When adding new chips to this driver, these can be easily omitted, because
these also need to be updated in 2 switch statements.
However, if adding them in the chip-info constants, they are updated in a
single place and propagated in both switch statements.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20200924080518.96410-2-alexandru.ardelean@analog.com
|
|
Make use of devm_platform_get_and_ioremap_resource() provided by
driver core platform instead of duplicated analogue, dev_err() is
removed because it has been done in devm_ioremap_resource().
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/r/20200918083142.32816-1-bobo.shaobowang@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
