summaryrefslogtreecommitdiffstats
path: root/drivers/iio/accel
AgeCommit message (Collapse)Author
2013-11-17iio:accel:kxsd9 fix missing mutex unlockFrank Zago
This will leave a lock held after reading from the device, preventing any further reads. Signed-off-by: Frank Zago <frank@zago.net> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-02iio: hid_Sensors: fix crash during trigger unregisterSrinivas Pandruvada
We can't store the trigger instance created by iio_trigger_alloc, in trig field of iio_device structure. This needs to be stored in the driver private data. Othewise it can result in crash during module unload. Hence created a trig_ptr in the common data structure for each HID sensor IIO driver and storing here. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-24iio: accel: kxsd9: Remove redundant variableSachin Kamat
Return directly thereby eliminating an intermediate variable. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-16iio:st_accel: Drop redundant call to iio_sw_buffer_preenable()Lars-Peter Clausen
The equivalent of iio_sw_buffer_preenable() is now done in the IIO buffer core, so there is no need to do this from the driver anymore. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-25Merge 3.12-rc2 into staging-next.Greg Kroah-Hartman
This resolves the merge problem with two iio drivers that Stephen Rothwell pointed out. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-21iio:accel: Register buffer also without specific triggerDenis CIOCCA
This patch fix buffer registration that allows to use generic IIO trigger. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio: accel-core: st: Clean up error handling in probe()Lee Jones
Reduce the amount of those unnecessary goto calls, as in most cases we can simply return immediately. We also only call for the IRQ number once and use that value throughout. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio:bma180: Use iio_push_buffers_with_timestamp()Lars-Peter Clausen
Makes the code shorter and a bit less ugly. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-21iio: Fix bma180 dev-to-indio_dev conversion in suspend/resumePeter Meerwald
dev_to_iio_dev() is a false friend Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-09-15iio: Remove unnecessary casts for iio_push_to_buffers()Lars-Peter Clausen
Now that iio_push_to_buffers() takes a void pointer for the data parameter we can remove those casts to u8*. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-28iio: add Bosch BMA180 acceleration sensor driverOleksandr Kravchenko
This patch adds IIO driver for Bosch BMA180 triaxial acceleration sensor. http://dlnmh9ip6v2uc.cloudfront.net/datasheets/ Sensors/Accelerometers/BST-BMA180-DS000-07_2.pdf Signed-off-by: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-19iio: Remove unnecessary _write_raw_get_fmt() in several hid-sensor driversPeter Meerwald
IIO_VAL_INT_PLUS_MICRO is the default, no need to return it explicitly Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: accel: st_accel: Use devm_iio_device_allocSachin Kamat
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: accel: kxsd9: Use devm_iio_device_allocSachin Kamat
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: hid-sensor-accel-3d: Use devm_iio_device_allocSachin Kamat
Using devm_iio_device_alloc makes code simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: Add a comment to about alphabetical order to Kconfigs and MakefilesLars-Peter Clausen
Keeping Makefile and Kconfig entries in alphabetical order usually works better than just appending new entries at the end, since it reduces the amount of conflicts. This patch adds a comment to the IIO Kconfig and Makefile files to document that the entries should be kept in alphabetical order. Also reorder those entries which weren't in alphabetical order yet. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: hid-sensor-accel-3d: add module alias for autoloadAlexander Holler
Add a MODULE_DEVICE_TABLE in order to let hotplug mechanisms automatically load the driver. This makes it also possible to use the usual driver name instead of HID-SENSOR-2000xx which isn't very descriptive in kernel messages. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Acked-by:Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: reword help text of several IIO_ST driversPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: "Denis Ciocca" <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-03iio: Added ST-sensors platform data to select the DRDY interrupt pinDenis CIOCCA
This patch add support to redirect the DRDY interrupt on INT1 or INT2 on accelerometer and pressure sensors. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-05iio:common: Removed stuff macros, added num_data_channels on st_sensors ↵Denis CIOCCA
struct and added support on one-shot sysfs reads to 3 byte channel This patch introduce num_data_channels variable on st_sensors struct to manage different type of channels (size or number) in st_sensors_get_buffer_element function. Removed ST_SENSORS_NUMBER_DATA_CHANNELS and ST_SENSORS_BYTE_FOR_CHANNEL and used struct iio_chan_spec const *ch to catch data. Added 3 byte channel data support on one-shot reads. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-06-04iio:common: ST_SENSORS_LSM_CHANNELS macro changedDenis CIOCCA
Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-05-22iio: STMicroelectronics: remove three useless selectsPaul Bolle
Drivers for STMicroelectronics accelerometers, gyroscopes, and magnetometers were added in v3.9. They all have a (similar) select statement in their Kconfig files for a non-existant Kconfig symbol. These select statements can safely be removed. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-03-25iio:trigger: Introduce iio_tigger_{set,get}_drvdataLars-Peter Clausen
Introduce iio_tigger_{set,get}_drvdata which allows to attach driver specific data to a trigger. The functions wrap access to the triggers private_data field and all current users are updated to use iio_tigger_{set,get}_drvdata instead of directly accessing the private_data field. This is the first step towards removing the private_data field from the iio_trigger struct. The following coccinelle script has been used to update the drivers: <smpl> @@ struct iio_trigger *trigger; expression priv; @@ -trigger->private_data = priv +iio_trigger_set_drv_data(trigger, priv) @@ struct iio_trigger *trigger; @@ -trigger->private_data +iio_trigger_get_drv_data(trigger) </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-03-17iio:accel:kxsd9 move to info_mask_(shared_by_type/separate)Jonathan Cameron
The original info_mask is going away in favour of the broken out versions. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-03-17iio:hid_sensors move to info_mask_(shared_by_type/separate)Jonathan Cameron
The original info_mask is going away in favour of the broken out versions. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-02-09iio:st_sensors fix build when !CONFIG_IIO_TRIGGERJonathan Cameron
Partly a case of removing unused headers and partly a case of ifdefing out the iio_trigger_ops structures. This has come about because of an 'unusual' separation of code in this driver. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Denis Ciocca <denis.ciocca@st.com>
2013-02-09iio: Use spi_sync_transfer()Lars-Peter Clausen
Use the new spi_sync_transfer() helper function instead of open-coding it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-31iio:accel: Add STMicroelectronics accelerometers driverDenis Ciocca
This patch adds a generic accelerometer driver for STMicroelectronics accelerometers, currently it supports: LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC, LIS331DLH, LSM303DL, LSM303DLM, LSM330. Signed-off-by: Denis Ciocca <denis.ciocca@st.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-26iio:accel:kxsd9 move out of stagingJonathan Cameron
This is a very simple driver giving basic access to this part over an spi bus. Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-25Merge 3.8-rc5 into staging-nextGreg Kroah-Hartman
This resolves a merge issue with a iio driver, and the zram code. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-14Merge tag 'staging-3.8-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg Kroah-Hartman: "Here are a number of small fixes to staging drivers for your 3.8-rc3 tree. Well, the omapdrm fixes aren't really "small" but they were waiting on a number of other drm patches to go in through the drm tree, and got delayed by my vacation over the holidays. They are totally self-contained, everyone involved have acked them, and they fix issues that people have been having with the driver. Other than that one, it's a bunch of tiny bugfixes for a number of reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>" * tag 'staging-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (36 commits) staging: zram: fix invalid memory references during disk write staging: tidspbridge: use prepare/unprepare on dsp clocks staging: tidspbridge: Fix build breakage due to splitting CM functions. staging: comedi: comedi_test: fix race when cancelling command staging: comedi: Kconfig: COMEDI_NI_AT_A2150 should select COMEDI_FC staging: comedi: prevent auto-unconfig of manually configured devices staging: comedi: fix minimum AO period for NI 625x and NI 628x staging: vme_pio2: fix oops on module unloading staging: speakup: avoid out-of-range access in synth_add() staging: speakup: avoid out-of-range access in synth_init() staging: rtl8192e: Fix failure to check pci_map_single() staging: rtl8187se: Fix failure to check pci_map_single() staging: drm/imx: fix double free bug in error path staging: drm/imx: several bug fixes staging: drm/imx: check return value of ipu_reset() staging: drm/omap: fix flags in dma buf exporting staging: drm/omap: use omapdss low level API staging/fwserial: Update TODO file per reviewer comments staging/fwserial: Limit tx/rx to 1394-2008 spec maximum staging/fwserial: Refine Kconfig help text ...
2013-01-07Merge branch 'staging-linus' into staging-nextGreg Kroah-Hartman
This is to get the comedi fixes, and resolve the issue in comdi_test.c and comedi_fops.c that were caused by changes in both branches. It also allows the fwserial driver changes to be applied, as they required the fixes that are in staging-linus. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-06hid: iio: rename struct hid_sensor_iio_common to hid_sensor_commonAlexander Holler
The structure with common attributes for hid-sensors isn't specific to the iio-subsystem, so rename it to hid_sensor_common. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-06iio: merge hid-sensor-attributes.h into hid-sensor-hub.hAlexander Holler
The stuff in hid-sensor-attributes.h is needed by every piece which uses hid-sensor-hub and merging it into hid-sensor-hub.h makes it accessible from outside the iio subdirectory. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-01-03Drivers: iio: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-27iio: hid-sensors: respect CONFIG_IIO_TRIGGERAlexander Holler
Not much to say, without that change, hid-sensor-trigger will be always compiled if HID_SENSOR_IIO_COMMON is selected which fails if CONFIG_IIO_TRIGGER is not set because CONFIG_IIO_CONSUMERS_PER_TRIGGER will not be defined. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-17iio: hid-sensor: Return proper error if kmemdup failsAxel Lin
Return -ENOMEM instead of 0 if kmemdup fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-11-10staging:iio: Add support for multiple buffersJonathan Cameron
Route all buffer writes through the demux. Addition or removal of a buffer results in tear down and setup of all the buffers for a given device. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Tested-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
2012-10-19iio: fix spelling of Accelerometer in KconfigPeter Meerwald
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Srinivas pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-08iio: Drop timestamp parameter from buffer store_to callbackLars-Peter Clausen
Drop timestamp parameter from buffer store_to callback and subsequently from iio_push_to_buffer. The timestamp parameter is unused and it seems likely that it will stay unused in the future, so it should be safe to remove it. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-07staging:iio: hid-sensors Use iio_push_to_bufferJonathan Cameron
Consistently use iio_push_to_buffer instead of manually calling the buffers store_to callback. These crossed with Lars-Peter's patch set doing every other case. Signed-off-by: Jonathan Cameron <jic23@kernel.org> Acked-by: srinivas pandruvada <srinivas.pandruvada@intel.com>
2012-09-06iio: hid-sensors: Added accelerometer 3Dsrinivas pandruvada
Added usage id processing for Accelerometer 3D.This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>