| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm updates from Dave Airlie:
"This is going to rebuild more than drm as it adds a new helper to
list.h for doing bulk updates. Seemed like a reasonable addition to
me.
Otherwise the usual merge window stuff lots of i915 and amdgpu, not so
much nouveau, and piles of everything else.
Core:
- Adds a new list.h helper for doing bulk list updates for TTM.
- Don't leak fb address in smem_start to userspace (comes with EXPORT
workaround for people using mali out of tree hacks)
- udmabuf device to turn memfd regions into dma-buf
- Per-plane blend mode property
- ref/unref replacements with get/put
- fbdev conflicting framebuffers code cleaned up
- host-endian format variants
- panel orientation quirk for Acer One 10
bridge:
- TI SN65DSI86 chip support
vkms:
- GEM support.
- Cursor support
amdgpu:
- Merge amdkfd and amdgpu into one module
- CEC over DP AUX support
- Picasso APU support + VCN dynamic powergating
- Raven2 APU support
- Vega20 enablement + kfd support
- ACP powergating improvements
- ABGR/XBGR display support
- VCN jpeg support
- xGMI support
- DC i2c/aux cleanup
- Ycbcr 4:2:0 support
- GPUVM improvements
- Powerplay and powerplay endian fixes
- Display underflow fixes
vmwgfx:
- Move vmwgfx specific TTM code to vmwgfx
- Split out vmwgfx buffer/resource validation code
- Atomic operation rework
bochs:
- use more helpers
- format/byteorder improvements
qxl:
- use more helpers
i915:
- GGTT coherency getparam
- Turn off resource streamer API
- More Icelake enablement + DMC firmware
- Full PPGTT for Ivybridge, Haswell and Valleyview
- DDB distribution based on resolution
- Limited range DP display support
nouveau:
- CEC over DP AUX support
- Initial HDMI 2.0 support
virtio-gpu:
- vmap support for PRIME objects
tegra:
- Initial Tegra194 support
- DMA/IOMMU integration fixes
msm:
- a6xx perf improvements + clock prefix
- GPU preemption optimisations
- a6xx devfreq support
- cursor support
rockchip:
- PX30 support
- rgb output interface support
mediatek:
- HDMI output support on mt2701 and mt7623
rcar-du:
- Interlaced modes on Gen3
- LVDS on R8A77980
- D3 and E3 SoC support
hisilicon:
- misc fixes
mxsfb:
- runtime pm support
sun4i:
- R40 TCON support
- Allwinner A64 support
- R40 HDMI support
omapdrm:
- Driver rework changing display pipeline ordering to use common code
- DMM memory barrier and irq fixes
- Errata workarounds
exynos:
- out-bridge support for LVDS bridge driver
- Samsung 16x16 tiled format support
- Plane alpha and pixel blend mode support
tilcdc:
- suspend/resume update
mali-dp:
- misc updates"
* tag 'drm-next-2018-10-24' of git://anongit.freedesktop.org/drm/drm: (1382 commits)
firmware/dmc/icl: Add missing MODULE_FIRMWARE() for Icelake.
drm/i915/icl: Fix signal_levels
drm/i915/icl: Fix DDI/TC port clk_off bits
drm/i915/icl: create function to identify combophy port
drm/i915/gen9+: Fix initial readout for Y tiled framebuffers
drm/i915: Large page offsets for pread/pwrite
drm/i915/selftests: Disable shrinker across mmap-exhaustion
drm/i915/dp: Link train Fallback on eDP only if fallback link BW can fit panel's native mode
drm/i915: Fix intel_dp_mst_best_encoder()
drm/i915: Skip vcpi allocation for MSTB ports that are gone
drm/i915: Don't unset intel_connector->mst_port
drm/i915: Only reset seqno if actually idle
drm/i915: Use the correct crtc when sanitizing plane mapping
drm/i915: Restore vblank interrupts earlier
drm/i915: Check fb stride against plane max stride
drm/amdgpu/vcn:Fix uninitialized symbol error
drm: panel-orientation-quirks: Add quirk for Acer One 10 (S1003)
drm/amd/amdgpu: Fix debugfs error handling
drm/amdgpu: Update gc_9_0 golden settings.
drm/amd/powerplay: update PPtable with DC BTC and Tvr SocLimit fields
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
"A bit bigger than normal as I've been busy this cycle.
There's a few things with dependencies and a few things subsystem
maintainers didn't pick up, so I'm taking them thru my tree.
The fixes from Johan didn't get into linux-next, but they've been
waiting for some time now and they are what's left of what subsystem
maintainers didn't pick up.
Summary:
- Sync dtc with upstream version v1.4.7-14-gc86da84d30e4
- Work to get rid of direct accesses to struct device_node name and
type pointers in preparation for removing them. New helpers for
parsing DT cpu nodes and conversions to use the helpers. printk
conversions to %pOFn for printing DT node names. Most went thru
subystem trees, so this is the remainder.
- Fixes to DT child node lookups to actually be restricted to child
nodes instead of treewide.
- Refactoring of dtb targets out of arch code. This makes the support
more uniform and enables building all dtbs on c6x, microblaze, and
powerpc.
- Various DT binding updates for Renesas r8a7744 SoC
- Vendor prefixes for Facebook, OLPC
- Restructuring of some ARM binding docs moving some peripheral
bindings out of board/SoC binding files
- New "secure-chosen" binding for secure world settings on ARM
- Dual licensing of 2 DT IRQ binding headers"
* tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits)
ARM: dt: relicense two DT binding IRQ headers
power: supply: twl4030-charger: fix OF sibling-node lookup
NFC: nfcmrvl_uart: fix OF child-node lookup
net: stmmac: dwmac-sun8i: fix OF child-node lookup
net: bcmgenet: fix OF child-node lookup
drm/msm: fix OF child-node lookup
drm/mediatek: fix OF sibling-node lookup
of: Add missing exports of node name compare functions
dt-bindings: Add OLPC vendor prefix
dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus
dt-bindings: thermal: samsung: Add SPDX license identifier
dt-bindings: clock: samsung: Add SPDX license identifiers
dt-bindings: timer: ostm: Add R7S9210 support
dt-bindings: phy: rcar-gen2: Add r8a7744 support
dt-bindings: can: rcar_can: Add r8a7744 support
dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support
dt-bindings: watchdog: renesas-wdt: Document r8a7744 support
dt-bindings: thermal: rcar: Add device tree support for r8a7744
Documentation: dt: Add binding for /secure-chosen/stdout-path
dt-bindings: arm: zte: Move sysctrl bindings to their own doc
...
|
|
Use the new of_get_compatible_child() helper to lookup the legacy
pwrlevels child node instead of using of_find_compatible_node(), which
searches the entire tree from a given start node and thus can return an
unrelated (i.e. non-child) node.
This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the probed device's node).
While at it, also fix the related child-node reference leak.
Fixes: e2af8b6b0ca1 ("drm/msm: gpu: Use OPP tables if we can")
Cc: stable <stable@vger.kernel.org> # 4.12
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
This patch uses the proper do_div() macro to perform u64 division and
guards against overflow if the result is too large for the unsigned long
return type
Fixes: a2c3c0a54d4c drm/msm/a6xx: Add devfreq support for a6xx
Cc: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
A small fixup I posted with my v2 patch [1] that was dropped.
[1]- https://lists.freedesktop.org/archives/freedreno/2018-October/003647.html
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The CP performance counter selects were accidentally marked as protected
so they couldn't be written from PM4 streams. Remove the protection
because user space does have an interest in setting up their own
counters.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
We are currently leaking a drm_crtc_commit struct for every atomic
commit containing plane state. The dpu plane destroy function cleans up
the fb reference manually, but fails to release the commit ref. As a
result, we just keep allocating drm_crtc_commits without ever freeing
them. Fortunately there's a helper function which will clean up all of
our mess at once, so use that.
Thanks to Doug Anderson for reporting the memory leak (and leaving
breadcrumbs from kmemleak!).
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This patch uses the proper do_div() macro to perform u64 division and
guards against overflow if the result is too large for the unsigned long
return type
Fixes: de0a3d094de0 drm/msm: re-factor devfreq code
Cc: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
As done treewide earlier, this catches several more open-coded
allocation size calculations that were added to the kernel during the
merge window. This performs the following mechanical transformations
using Coccinelle:
kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...)
kvzalloc(a * b, ...) -> kvcalloc(a, b, ...)
devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...)
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Implement routines to estimate GPU busy time and fetching the
current frequency for the polling interval. This is required by
the devfreq framework which recommends a frequency change if needed.
The driver code then tries to set this new frequency on the GPU by
sending an Out Of Band(OOB) request to the GMU.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The devfreq framework requires the drivers to provide busy time estimations.
The GPU driver relies on the hardware performance counteres for the busy time
estimations, but different hardware revisions have counters which can be
sourced from different clocks. So the busy time estimation will be target
dependent. Additionally on targets where the clocks are completely controlled
by the on chip microcontroller, fetching and setting the current GPU frequency
will be different. This patch aims to embrace these differences by re-factoring
the devfreq code a bit.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Add a simple function to read 64 registers in the GMU domain
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Devfreq turns on and starts recommending power level as soon as it is
initialized. The GPU is still not powered on by the time the devfreq
init happens and this leads to problems on GPU's where register access
is needed to get/set power levels. So we start suspended and only restart
devfreq when GPU is powered on.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The target definition for a630 didn't set a reasonable
value for inactive_period so it defaulted to zero and
we were essentially powering down after every submission.
Set it back to the default value to keep the GPU from
bouncing too much during regular workloads.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This patch unifies the naming of DRM functions for reference counting
of struct drm_framebuffer. The resulting code is more aligned with the
rest of the Linux kernel interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The only HFI communication with the GMU on sdm845 happens
during initialization and all commands are synchronous. A fancy
interrupt tasklet and associated infrastructure is entirely
not eeded and puts us at the mercy of the scheduler.
Instead poll for the message signal and handle the response
immediately and go on our way.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The point of the 'force_dma' parameter for of_dma_configure
is to force the device to be set up even if DMA capability is
not described by the firmware which is exactly the use case
we have for GMU - we need SMMU to get set up but we have no
other dma capabilities since memory is managed by the GPU
driver. Currently we pass false so of_dma_configure() fails
and subsequently GMU and GPU probe does as well.
Fixes: 4b565ca5a2c ("drm/msm: Add A6XX device support")
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
In the case where preemption is not enabled, this patch simply skips
preemption related initialization in hardware init sequence.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The return from the call to _mixer_stages can be a negative error
code however this is being assigned to an unsigned variable 'stages'
hence the check is always false. Fix this by making 'stages' an
int.
Detected by Coccinelle ("Unsigned expression compared with zero:
stages < 0")
Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The current design greedily takes a big chunk of the PDC
register space instead of just the GPU specific sections
which conflicts with other drivers and generally makes
a mess of things.
Furthermore we only need to map the GPU PDC sections
just once during init so map the memory inside the function
that uses it and adjust the pointers and register offsets
accordingly.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
>From the review for the DT bindings for the GPU/GMU it
was suggested that the phandle for the GMU be
'qcom,gmu' instead of just 'gmu'.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
When CONFIG_DEV_COREDUMP isn't defined msm_gpu_crashstate_capture
doesn't pass the correct parameters.
drivers/gpu/drm/msm/msm_gpu.c: In function ‘recover_worker’:
drivers/gpu/drm/msm/msm_gpu.c:479:34: error: passing argument 2 of ‘msm_gpu_crashstate_capture’ from incompatible pointer type [-Werror=incompatible-pointer-types]
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: expected ‘char *’ but argument is of type ‘struct msm_gem_submit *’
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:479:2: error: too many arguments to function ‘msm_gpu_crashstate_capture’
msm_gpu_crashstate_capture(gpu, submit, comm, cmd);
^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/msm/msm_gpu.c:388:13: note: declared here
static void msm_gpu_crashstate_capture(struct msm_gpu *gpu, char *comm,
In current code the function msm_gpu_crashstate_capture parameters.
Fixes: cdb95931dea3 ("drm/msm/gpu: Add the buffer objects from the submit to the crash dump")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-By: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The index of the perf table was being set in the wrong bit position
in the register. With this fix, the GPU clock can be seen running at
desired frequency.
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The [v]snprintf() functions return the size that *would have* been
written into the buffer, rather than the size *actually* written.
Which results in us trying to memcpy() past the end of the stack.
What we really want is [v]scnprintf().
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
cur_master in dpu_encoder is assigned at modeset and cleared on
.disable(). Unfortunately dpms (or enable/disable) does not guarantee a
modeset, so cur_master is NULL when we try to re-enable it.
This patch moves the NULL assignment to setup_display where it will be
re-assigned later in the function.
Tested-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Remove unneeded checks from _dpu_plane_get_aspace.
v3: change _dpu_plane_get_aspace to return a struct
*msm_gem_address_space instead passing in a pointer of the same
type to edit. Remove uneeded arguments.
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Removed all impossible checks from the function, which eliminates
the need for a return value. This function is also never used
outside of dpu_plane.c, so the function is made static.
v3: Using helper function _dpu_plane_get_kms() instead of doing
it locally.
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Removes redundant tests for _dpu_crtc_vblank_enable_no_lock.
Function return type is now void and all function calls have
been changed accordingly.
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
All checks for _dpu_crtc_power_enable are not true, so the function
can never return an error code. This removes the need for the
function as pm_runtime functions can be used instead.
v3: Separated _dpu_crtc_power_enable into _dpu_crtc_power_enable and
_dpu_crtc_power_disable for clarity.
v4: Removed both _dpu_crtc_power_enable and _dpu_crtc_power_disable
and called pm_runtime_get_sync and pm_runtime_put_sync from all
call points
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Removes impossible checks in dpu_crtc.c.
Variable assignments are moved up to be initializations where
possible. Some variables are no longer used, these are removed.
v3: reverted back to original patch
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Removes unnecessary checks from dpu_plane_atomic_disable, old_state
argument for both dpu_plane_atomic_disable and
dpu_plane_sspp_atomic_update is removed as it is no longer used.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Removes some checks from dpu_plane.c that will never result in an error.
Subsequent variable assignments become part of the initialization wherever
possible. Unused variables are removed.
v3: removed additional impossible checks and called helper function
_dpu_plane_get_kms() where possible.
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Bruce Wang <bzwang@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
TP_printk is not synchronous, so storing pointers and then later
dereferencing them is a Bad Idea. This patch stores everything locally to
avoid display stomped memory.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
[seanpaul fixed up commit msg typo on apply]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
It's useful to know which bits of the flush come from extra_flush_bits
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
We're printing the frame_busy_mask in a trace, but after it's been
cleared. This, as it turns out, is pretty pointless.
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
There's no benefit in falling out of the if, just return directly.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
All of the checks in dpu_plane_sspp_atomic_update() are impossible, so
remove them and make the function void. This removes the need to error
check in dpu_plane_atomic_update(). Additionally, remove impossible checks
in dpu_plane_atomic_update().
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
plane->state->visible encompasses all of these checks and more, so we
can just check visible.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
It's doing the same thing dpu_plane_enabled() is.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
dpu_plane_atomic_check() is a very thin wrapper around
dpu_plane_sspp_atomic_check(). All it does is a NULL-check of state->fb,
which is already done by drm_atomic_helper_check_plane_state(). Further,
the helper sets state->visible = false when this is true. So remove
dpu_plane_atomic_check() and just use dpu_plane_sspp_atomic_check()
directly.
Changes in v2:
- Fix spelling mistake in Subject (Jeykumar)
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
src/dst rects are checked in both atomic_check and atomic_update, with
the more comprehensive check occurring in atomic_update, which is
backwards. So consolodate the checks in atomic_check.
Changes in v2:
- Use the correct crtc state (Jeykumar)
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
This patch removes some checks which are impossible to hit. As a result,
we can move some of the local var assignments into the declarations.
Changes in v2:
- None
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
enum dpu_ad isn't used and can be safely removed.
Reviewed-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
RM maintained a redundant definition for display topology
to identify the no. of hw blocks needed for a display
and their hardware dependencies. This information can be
implicitly deduced from the msm_display_topology structure
available in RM reserve request. In addition to getting
rid of the redundant topology, this change also removes
the topology name enums and their usages.
changes in v4:
- remove the topology name enum entirely (Sean)
changes in v5:
- remove RM topology definition and their
references (Sean)
- Implement helper for dual mixer CRTC (Sean)
changes in v6:
- avoid heap memory for topology (Sean)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
DPU, being over protective, validates every parameter of a
module. This change traces the call stack for some of encoder
functions affected by previous set of clean up patches and
cleans up unwanted validations.
changes in v5:
- Introduced in the series
changes in v6:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Connector states were passed around RM to update the custom
topology connector property with chosen topology data. Now that
we got rid of both custom properties and topology names, this
change cleans up the mechanism to pass connector states across
RM helpers and encoder functions.
changes in v5:
- Introduced in the series
changes in v6:
- remove parameter checking in rm reserve (Jordan)
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Encoder H_TILE values are not used for allocating the hw blocks.
no. of hw_intf blocks provides the info.
changes in v4:
- remove irrelevant changes (Sean)
- retain log macros (Sean)
changes in v5:
- none
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
