summaryrefslogtreecommitdiffstats
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)Author
2020-08-18drm/amd/display: Reset scrambling on Test PatternChris Park
[Why] Programming is missing the sequence where for eDP the scrambling is reset when testing for eye diagram test pattern. [How] Include the required register in the definition Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-18drm/amd/display: fix dcn3 wide timing dsc validationDmytro Laktyushkin
Wide timing DSC requires odm. Since spreadsheet is missing this dsc validation we have to modify DML vba code ourselves. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-18drm/amd/display: Fix DFPstate hang due to view port changedPaul Hsieh
[Why] Place the cursor in the center of screen between two pipes then adjusting the viewport but cursour doesn't update cause DFPstate hang. [How] If viewport changed, update cursor as well. Cc: stable@vger.kernel.org Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-18drm/amd/display: Assign correct left shiftChris Park
[Why] Reading for DP alt registers return incorrect values due to LE_SF definition missing. [How] Define correct LE_SF or DP alt registers. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-18drm/amd/display: Call DMUB for eDP power controlChris Park
[Why] If DMUB is used, LVTMA VBIOS call can be used to control eDP instead of tranditional transmitter control. Interface is agreed with VBIOS for eDP to use this new path to program LVTMA registers. [How] Create DAL interface to send DMUB command for LVTMA as currently implemented in VBIOS. Signed-off-by: Chris Park <Chris.Park@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10drm/amdgpu/display: use GFP_ATOMIC in dcn20_validate_bandwidth_internalDaniel Kolesa
GFP_KERNEL may and will sleep, and this is being executed in a non-preemptible context; this will mess things up since it's called inbetween DC_FP_START/END, and rescheduling will result in the DC_FP_END later being called in a different context (or just crashing if any floating point/vector registers/instructions are used after the call is resumed in a different context). Signed-off-by: Daniel Kolesa <daniel@octaforge.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-08-10drm/amd/display: Blank stream before destroying HDCP sessionJaehyun Chung
[Why] Stream disable sequence incorretly destroys HDCP session while stream is not blanked and while audio is not muted. This sequence causes a flash of corruption during mode change and an audio click. [How] Change sequence to blank stream before destroying HDCP session. Audio will also be muted by blanking the stream. Cc: stable@vger.kernel.org Signed-off-by: Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10drm/amd/display: Switch to immediate mode for updating infopacketsAnthony Koo
[Why] Using FRAME_UPDATE will result in infopacket to be potentially updated one frame late. In commit stream scenarios for previously active stream, some stale infopacket data from previous config might be erroneously sent out on initial frame after stream is re-enabled. [How] Switch to using IMMEDIATE_UPDATE mode Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-10drm/amd/display: Fix incorrect backlight register offset for DCNAric Cyr
[Why] Typo in backlight refactor inctroduced wrong register offset. [How] Change DCE to DCN register map for PWRSEQ_REF_DIV Cc: stable@vger.kernel.org Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Display goes blank after instIgor Kravchenko
[why] Display goes blank after driver installation. Aux tuning parameters must be used for 2.x only. Wrong dc_golden_table offset was used. [How] Implement a new enc3_hw_init function without VBIOS constants usage to be called for 3.x Calculate dc_golden_table offset using sum of base dce_info offset and golden table offset Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Change null plane state swizzle mode to 4kb_sGeorge Shen
[Why] During SetPathMode and UpdatePlanes, the plane state can be null. We default to linear swizzle mode when plane state is null. This resulted in bandwidth validation failing when trying to set 8K60 mode (which previously passed validation during rebuild timing list). [How] Change the default swizzle mode from linear to 4kb_s and update pitch accordingly. Signed-off-by: George Shen <george.shen@amd.com> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use helper function to check for HDMI signalJinZe.Xu
[How] Use dc_is_hdmi_signal to determine signal type. Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: AMD OUI (DPCD 0x00300) skipped on some sinkAric Cyr
[Why] Sink OUI supported cap is not set so driver skips programming it. [How] Revert the change the skips OUI programming if the cap is not set Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix logger contextHarry Wentland
[Why&How] use correct logger context Signed-off-by: Harry Wentland <harry.wentland@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: populate new dml variableDmytro Laktyushkin
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Read VBIOS Golden Settings TblIgor Kravchenko
[Why] For ver.4.4 and higher VBIOS contains default setting table. {How] Read Golden Settings Table from VBIOS, apply Aux tuning parameters. Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use parameter for call to set output muxEric Bernstein
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Fix DP Compliance tests 4.3.2.1 and 4.3.2.2Aric Cyr
[Why] Test expects that we also read HPD_IRQ_VECTOR when checking for symbol loss as well lane status. [How] Read bytes 0x200-0x205 instead of just 0x202-0x205 Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use hw lock mgrWyatt Wood
[Why] Feature requires synchronization of dig, pipe, and cursor locking between driver and fw. [How] Set flag to force psr to use hw lock mgr. Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: dchubbub p-state warning during surface planes switchhersen wu
[Why] ramp_up_dispclk_with_dpp is to change dispclk, dppclk and dprefclk according to bandwidth requirement. call stack: rv1_update_clocks --> update_clocks --> dcn10_prepare_bandwidth / dcn10_optimize_bandwidth --> prepare_bandwidth / optimize_bandwidth. before change dcn hw, prepare_bandwidth will be called first to allow enough clock, watermark for change, after end of dcn hw change, optimize_bandwidth is executed to lower clock to save power for new dcn hw settings. below is sequence of commit_planes_for_stream: step 1: prepare_bandwidth - raise clock to have enough bandwidth step 2: lock_doublebuffer_enable step 3: pipe_control_lock(true) - make dchubp register change will not take effect right way step 4: apply_ctx_for_surface - program dchubp step 5: pipe_control_lock(false) - dchubp register change take effect step 6: optimize_bandwidth --> dc_post_update_surfaces_to_stream for full_date, optimize clock to save power at end of step 1, dcn clocks (dprefclk, dispclk, dppclk) may be changed for new dchubp configuration. but real dcn hub dchubps are still running with old configuration until end of step 5. this need clocks settings at step 1 should not less than that before step 1. this is checked by two conditions: 1. if (should_set_clock(safe_to_lower , new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) || new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz) 2. request_dpp_div = new_clocks->dispclk_khz > new_clocks->dppclk_khz the second condition is based on new dchubp configuration. dppclk for new dchubp may be different from dppclk before step 1. for example, before step 1, dchubps are as below: pipe 0: recout=(0,40,1920,980) viewport=(0,0,1920,979) pipe 1: recout=(0,0,1920,1080) viewport=(0,0,1920,1080) for dppclk for pipe0 need dppclk = dispclk new dchubp pipe split configuration: pipe 0: recout=(0,0,960,1080) viewport=(0,0,960,1080) pipe 1: recout=(960,0,960,1080) viewport=(960,0,960,1080) dppclk only needs dppclk = dispclk /2. dispclk, dppclk are not lock by otg master lock. they take effect after step 1. during this transition, dispclk are the same, but dppclk is changed to half of previous clock for old dchubp configuration between step 1 and step 6. This may cause p-state warning intermittently. [How] for new_clocks->dispclk_khz == clk_mgr_base->clks.dispclk_khz, we need make sure dppclk are not changed to less between step 1 and 6. for new_clocks->dispclk_khz > clk_mgr_base->clks.dispclk_khz, new display clock is raised, but we do not know ratio of new_clocks->dispclk_khz and clk_mgr_base->clks.dispclk_khz, new_clocks->dispclk_khz /2 does not guarantee equal or higher than old dppclk. we could ignore power saving different between dppclk = displck and dppclk = dispclk / 2 between step 1 and step 6. as long as safe_to_lower = false, set dpclk = dispclk to simplify condition check. CC: Stable <stable@vger.kernel.org> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Allow asic specific FSFT timing optimizationReza Amini
[Why] Each asic can optimize best based on its capabilities [How] Optimizing timing for a new pixel clock Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Disable idle optimizations before programming DCNJun Lei
[Why] Programming DCN is explicitly forbidden during idle optimzations allowed state. Existing implemenation relies on OS/DM, which is not robust. Instead DC should sequence this. Note that DC will not re-enter idle optimized state on its own, it is only responsible for catching out of sequence calls. It is still DM responsibility to sequence appropriate for optimized power, but this change removes the requirement for DM to cover the .1% case. [How] - elevate updates during idle optimized state to full updates - disable idle power optimizations prior to programming Signed-off-by: Jun Lei <jun.lei@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Use proper abm/backlight functions for DCN3Bhawanpreet Lakha
Use DCN21 functions instead of DCE110 Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Check lane status again after link training doneMartin Tsai
[Why] Some monitors could suffer symbol unlock but cannot send HPD IRQ to notic source device to handle link loss. This makes monitor stuck in abnormal status and causes black screen. [How] According to the suggestion from scalar vendor, to check lane status again after link training done. That can improve the comaptibility from current production monitors. Signed-off-by: Martin Tsai <martin.tsai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Don't compare dppclk before updating DTOAlvin Lee
[Why] In dcn3_update_clocks there are situations where dppclk is not lowered (i.e. stays the same), but DTO still needs to be increased before we program pipe frontend (i.e. in prepare_bandwidth). If we don't program the new DTO value before we program the pipe, we will underflow as soon as the pipe lock is released until the next call to dcn3_update_clocks where the DTO is updated. [How] Remove dppclk check before programming new DTO value. Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Rename bytes_pp to the correct bits_ppEryk Brol
[Why] Struct dcn_dsc_state is used for reading current state and parameters of DSC on a pipe, the target rate parameter uses bytes per pixel even though its reading BITS_PER_PIXEL register. [How] Changing it to Bits Per Pixel for consistency. Signed-off-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-08-06drm/amd/display: Clean up global sync param retrievalDmytro Laktyushkin
[Why] This change replaces older looping code in favor of these functions. [How] There are built in functions for extracting global sync params during mode validation now. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: 3.2.95Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: interface to obtain minimum plane size capsIgor Kravchenko
[Why] Implement an interface to obtain plane size caps [How] Add min_width, min_height fields to dc_plane_cap structure. Set values to 16x16 for discrete ASICs, and 64x64 for others. Signed-off-by: Igor Kravchenko <Igor.Kravchenko@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Improve compatibility by re-ordering info-packetsNaveed Ashfaq
[why] On DCN20, Some features would not be activated when ALLM was turned on. TV seemed to activate only the latest info packet sent, and the ALLM info packet was sent after the VSIF info packet. The packet indices was also inconsistent between DCN10 and DCN20. [how] Change the packet indices of DCN20 to match those of DCN10. This makes them consistent and also makes the vendor info packet be sent after the hfvsif info packet. Signed-off-by: Naveed Ashfaq <Naveed.Ashfaq@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Make new dc interface for adding dsc resourceAurabindo Pillai
[Why] dcn20_add_dsc_to_stream_resource is accessed in amdgpu_dm directly. This creates build error for configuration with DCN disabled. [How] Make the function available through a resource pool function so that dcn20 function need not be called directly. Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: rename dsc extended caps as dsc branch decoder capsWenjing Liu
[why] The capability fields are reserved for DSC branch only to report the capability related to the branch's DSC decoder. Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Implement AMD VSIF V3Reza Amini
[Why] To support V3 [How] Generate new VSIF for V3 Signed-off-by: Reza Amini <Reza.Amini@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: Add DSC parameters logging to debugfsEryk Brol
[why] Need to add new parameters to debugfs logging so we will know what parameters DSC is using for debug purposes. So we are adding a read function in debugfs to read DSC status registers Signed-off-by: Eryk Brol <eryk.brol@amd.com> Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-21drm/amd/display: remove unhelpful 5ms delayAric Cyr
[Why] Scaler vendor confirmed the 5ms was not helpful so no point in keeping it. [How] Revert 5ms delay after setting training pattern. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Ashley Thomas <Ashley.Thomas2@amd.com> Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: remove an unnecessary NULL checkDan Carpenter
The "stream" pointer can't be NULL and it's dereferenced on the line before so the check doesn't make sense. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Add missing DCN30 registers and fields for OTG_CRC_CNTL2Nicholas Kazlauskas
[Why] When enabling the debugfs for CRC capture we hit assertions caused by register address and field masks and shifts missing. [How] We want these registers programmed, so add in the SRI/SF entries for this register. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: handle failed allocation during stream constructionJosip Pavic
[Why] Failing to allocate a transfer function during stream construction leads to a null pointer dereference [How] Handle the failed allocation by failing the stream construction Cc: stable@vger.kernel.org Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: 3.2.94Aric Cyr
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: fix dcn3 p_state_change_support validation (v2)Dmytro Laktyushkin
Our validation is a known mess with actual validation mixed with topology configuration. This change makes sure topolgical validation is completed before any topology changes are made so we do not run into issues where we merge and split a pipe over the course of a single call. v2: Squash in compilation fix Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: p-state warning occurs while changing resolution from 120hz ↵hersen wu
to 60hz [Why] new calculated dispclk, dppclk are stored in context->bw_ctx.bw.dcn.clk.dispclk_khz, dppclk_khz. Current dispclk, dppclk are from dc->clk_mgr->clks.dispclk_khz. dcn_validate_bandwidth compute new dispclk, dppclk. dispclk will put in use after optimize_bandwidth when ramp_up_dispclk_with_dpp is called. There are two places for dppclk be put in use. One location is the same as the location as dispclk. Another is within update_dchubp_dpp which happens between pre_bandwidth and optimize_bandwidth. dppclk updated within update_dchubp_dpp will cause new clock values of dispclk and dppclk not be in use at the same time. when clocks are decreased, this may cause dppclk is lower than current configuration and let pipe stuck. for example, eDP + external dp, change resolution of DP from 1920x1080x144hz to 1280x960x60hz. before change: dispclk = 337889 dppclk = 337889 change mode, dcn_validate_bandwidth calculate dispclk = 143122 dppclk = 143122 update_dchubp_dpp be executed before dispclk be updated, dispclk = 337889, but dppclk use new value dispclk /2 = 168944. this will cause pipe pstate warning issue. [How] between pre_bandwidth and optimize_bandwidth, while dispclk is going to be decreased, keep dppclk = dispclk Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: reduce sr_xxx_time by 3 us when ppt disableChiawen Huang
[Why] when ppt disabled, the watermark doesn't get fine tune causing underflow. [How] It is a temporary solution to reduce sr_xxx_time by 3 us when ppt disable. Signed-off-by: Chiawen Huang <chiawen.huang@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: Power down hardware if set mode is not called before timeoutSung Lee
[WHY] In headless systems, if set mode is not called, hardware will not be powered down on boot, causing HW/SW discrepancies. Powering down hardware on boot will ensure SW state is accurate. [HOW] Set a timer callback on boot for 10 seconds. If set mode is not called within that time, power down hardware. Otherwise, do not power down. Signed-off-by: Sung Lee <sung.lee@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-14drm/amd/display: update dml varDmytro Laktyushkin
Update *DynamicMetadata variables for providing more flexibility. Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Harry Wentland <Harry.Wentland@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10Revert "drm/amd/display: add mechanism to skip DCN init"Changfeng
To avoid s3 faild at the first cycle on renoir platform, it needs to revert this patch: drm/amd/display: add mechanism to skip DCN init Signed-off-by: changfeng <Changfeng.Zhu@amd.com> Ackedy-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/display: Fix CSC remap matrix not being applied on dcn30Nicholas Kazlauskas
[Why] DCN3 has two gamut remap matrices. When using CSC adjustment the CM remap is set to bypass and MPCC remap is used. However to bypass CM some state in the context is modified and not restored correctly resulting in subsequent calls to disable MPCC remap as well. [How] Fix logic for save/restore of remap enable flag when programming MPCC remap matrix. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-10drm/amd/display: Use VUPDATE_NO_LOCK instead of VUPDATE for dcn30Nicholas Kazlauskas
[Why] Soft hangs occur when FreeSync is engaged since we utilize VUPDATE (which doesn't fire when holding the pipe lock) to send back vblank events when FreeSync is active. [How] The alternative (working) interrupt source for this mechanism is VUPDATE_NO_LOCK. We already use this all other DCN revisions so align dcn30 with those as well. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Add missing reg mask for dcn3Bhawanpreet Lakha
This field is missing for dcn3 so add it from dcn20. enc2_set_dynamic_metadata() trys to sets this and we get a generic_reg warning since the mask is not defined. Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Add logger for SMU msgWesley Chalmers
[WHY] We want to be able to see SMU messages sent and their responses Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by: Joshua Aberback <Joshua.Aberback@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-07-08drm/amd/display: Request PHYCLK adjustment on PHY enable/disableJoshua Aberback
[Why] Currently we don't explicitly send a request for a minimum PHYCLK, and we hope that the dependencies other clocks have will raise PHYCLK when needed. [How] - new clk_mgr function to keep track of PHYCLK requirements - request maximum requirement across all links - remove PHYCLK from clock state comparator, as it doesn't come from DML Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Eryk Brol <eryk.brol@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-15 04:16:30 +0000