| Age | Commit message (Collapse) | Author |
|---|
|
The doorbell offset could mean the byte offset or the dword offset,
and the 0 offset place is also different, sometimes the start of PCI
doorbell bar or the start of process doorbell pages. Use better name
to avoid confusion.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The bitmap index calculation should reverse the logic used on allocation
so it will clear the same bit used on allocation
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
v2: Removed redundant 0x before %p.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Allocate doorbells according to the doorbell routing information on
SOC15 ASICs (Vega10 and later). On older ASICs we continue to use the
queue_id as the doorbell ID to maintain compatibility with the Thunk.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Use bit-rotate for better clarity and remove _MASK from the #defines as
these represent mmap types.
Centralize all the parsing of the mmap offset in kfd_mmap and add device
parameter to doorbell and reserved_mem map functions.
Encode gpu_id into upper bits of vm_pgoff. This frees up the lower bits
for encoding the the doorbell ID on Vega10.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This prepares for GFXv9 (Vega10), which has 64-bit doorbells.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Just print a pointer instead of casting
v2: Remove the 0x prefix, since %p prints that automatically, and remove
it from one other spot as well
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
PASID management is moving into KGD. Limiting the PASID range to the
number of doorbell pages is no longer practical.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Handle errors in doorbell aperture initialization instead of BUG_ON.
iounmap doorbell aperture during finalization.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Remove BUG_ONs that check for NULL pointer arguments that are
dereferenced in the same function. Dereferencing the NULL pointer
will generate a BUG anyway, so the explicit check is redundant and
unnecessary overhead.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Upstream prefers the !x notation to x==NULL or x==false. Along those lines
change the ==true or !=NULL references as well. Also make the references
to !x the same, excluding () for readability.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Consolidate log commands so that dev_info(NULL, "Error...") uses the more
accurate pr_err, remove the module name from the log (can be seen via
dynamic debugging with +m), and the function name (can be seen via
dynamic debugging with +f). We also don't need debug messages saying
what function we're in. Those can be added by devs when needed
Don't print vendor and device ID in error messages. They are typically
the same for all GPUs in a multi-GPU system. So this doesn't add any
value to the message.
Lastly, remove parentheses around %d, %i and 0x%llX.
According to kernel.org:
"Printing numbers in parentheses (%d) adds no value and should be
avoided."
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Linux 4.8-rc8
There was a lot of fallout in the imx/amdgpu/i915 drivers, so backmerge
it now to avoid troubles.
* tag 'v4.8-rc8': (1442 commits)
Linux 4.8-rc8
fault_in_multipages_readable() throws set-but-unused error
mm: check VMA flags to avoid invalid PROT_NONE NUMA balancing
radix tree: fix sibling entry handling in radix_tree_descend()
radix tree test suite: Test radix_tree_replace_slot() for multiorder entries
fix memory leaks in tracing_buffers_splice_read()
tracing: Move mutex to protect against resetting of seq data
MIPS: Fix delay slot emulation count in debugfs
MIPS: SMP: Fix possibility of deadlock when bringing CPUs online
mm: delete unnecessary and unsafe init_tlb_ubc()
huge tmpfs: fix Committed_AS leak
shmem: fix tmpfs to handle the huge= option properly
blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
MIPS: Fix pre-r6 emulation FPU initialisation
arm64: kgdb: handle read-only text / modules
arm64: Call numa_store_cpu_info() earlier.
locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
nvme-rdma: only clear queue flags after successful connect
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
perf/core: Limit matching exclusive events to one PMU
...
|
|
Signed-off-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The doorbell offset is formatted with a 0x prefix to suggest it is
a hexadecimal value, when in fact %d is being used and this is confusing.
Use %X instead to match the proceeding 0x prefix.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The current code can only support one kgd instance. We have to
support multiple kgd instances in one system. i.e two amdgpu or two
radeon or one amdgpu + one radeon or more than two kgd instances.
Signed-off-by: Xihan Zhang <xihan.zhang@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
This patch splits the current kfd_get_process_device_data() to two
functions, one that specifically creates a pdd and another one which
just do lookup.
This is done to enhance the readability and maintainability of the code.
Signed-off-by: Alexey Skidanov <Alexey.Skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
This patch fixes a compilation error when using certain configuration by
including the file io.h in kfd_doorbell.c
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
This patch adds the process module and three helper modules:
- kfd_process, which handles process which open /dev/kfd
- kfd_doorbell, which provides helper functions for doorbell allocation,
release and mapping to userspace
- kfd_pasid, which provides helper functions for pasid allocation and release
- kfd_aperture, which provides helper functions for managing the LDS, Local GPU
memory and Scratch memory apertures of the process
This patch only contains the basic kfd_process module, which doesn't contain
the reference to the queue scheduler. This was done to allow easier code review.
Also, this patch doesn't contain the calls to the IOMMU driver for binding the
pasid to the device. Again, this was done to allow easier code review
The kfd_process object is created when a process opens /dev/kfd and is closed
when the mm_struct of that process is teared-down.
v3:
Removed kfd_vidmem.c file
Replaced direct mmput call to mmu_notifier release
Removed typedefs
Moved bool field to end of the structure
Added new kernel params for gart usage limitation
Added initialization of sa manager
Fixed debug messages
Remove support for LDS in 32 bit
Changed code to support mmap of doorbell pages from userspace
Added documentation for apertures
v4: Replaced RCU by SRCU for kfd_process list management
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Rename kfd_aperture.c to kfd_flat_memory.c
Protect against multiple init calls
MQD size is H/W dependent so moved it to device info structure
Rename kfd_mem_obj structure's members
Use delayed function for process tear-down
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
