Age | Commit message (Collapse) | Author |
|
Track SDMA usage on a per process basis and report it through sysfs.
The value in the sysfs file indicates the amount of time SDMA has
been in-use by this process since the creation of the process.
This value is in microsecond granularity.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The current GWS usage model will only allows a single GWS-enabled
process to be active on the GPU at once. This ensures that a
barrier-using kernel gets a known amount of GPU hardware, to
prevent deadlock due to inability to go beyond the GWS barrier.
The HWS watches how many GWS entries are assigned to each process,
and goes into over-subscription mode when two processes need more
than the 64 that are available. The current KFD method for working
with this is to allocate all 64 GWS entries to each GWS-capable
process.
When more than one GWS-enabled process is in the runlist, we must
make sure the runlist is in over-subscription mode, so that the
HWS gets a chained RUN_LIST packet and continues scheduling
kernels.
Signed-off-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The previous way of using SDMA queue count to infer whether we should unmap
SDMA engines has bugs. The reason it did not cause issues is because MEC
firmware unmaps all queues (CP + SDMA) when a unmap package for compute
engine is received. Becasue of that, only one unmap queue package
is needed, instead of one unmap queue package for CP and each SDMA engine,
which results in much simpler driver code.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The previous code of calculating active CP queues is problematic if
some SDMA queues are inactive. Fix that by counting CP queues directly.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The queues represented in queue_bitmap are only CP queues.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The name is easier to understand the code.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move HWS hang detection into unmap_queues_cpsch to catch hangs in all
cases. If this happens during a reset, don't schedule another reset
because the reset already in progress is expected to take care of it.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
dqm->pipeline_mem wasn't used anywhere.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: shaoyunl <shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
If device reset/suspend/resume failed for some reason, dqm lock is
hold forever and this causes deadlock. Below is a kernel backtrace when
application open kfd after suspend/resume failed.
Instead of holding dqm lock in pre_reset and releasing dqm lock in
post_reset, add dqm->sched_running flag which is modified in
dqm->ops.start and dqm->ops.stop. The flag doesn't need lock protection
because write/read are all inside dqm lock.
For HWS case, map_queues_cpsch and unmap_queues_cpsch checks
sched_running flag before sending the updated runlist.
v2: For no-HWS case, when device is stopped, don't call
load/destroy_mqd for eviction, restore and create queue, and avoid
debugfs dump hdqs.
Backtrace of dqm lock deadlock:
[Thu Oct 17 16:43:37 2019] INFO: task rocminfo:3024 blocked for more
than 120 seconds.
[Thu Oct 17 16:43:37 2019] Not tainted
5.0.0-rc1-kfd-compute-rocm-dkms-no-npi-1131 #1
[Thu Oct 17 16:43:37 2019] "echo 0 >
/proc/sys/kernel/hung_task_timeout_secs" disables this message.
[Thu Oct 17 16:43:37 2019] rocminfo D 0 3024 2947
0x80000000
[Thu Oct 17 16:43:37 2019] Call Trace:
[Thu Oct 17 16:43:37 2019] ? __schedule+0x3d9/0x8a0
[Thu Oct 17 16:43:37 2019] schedule+0x32/0x70
[Thu Oct 17 16:43:37 2019] schedule_preempt_disabled+0xa/0x10
[Thu Oct 17 16:43:37 2019] __mutex_lock.isra.9+0x1e3/0x4e0
[Thu Oct 17 16:43:37 2019] ? __call_srcu+0x264/0x3b0
[Thu Oct 17 16:43:37 2019] ? process_termination_cpsch+0x24/0x2f0
[amdgpu]
[Thu Oct 17 16:43:37 2019] process_termination_cpsch+0x24/0x2f0
[amdgpu]
[Thu Oct 17 16:43:37 2019]
kfd_process_dequeue_from_all_devices+0x42/0x60 [amdgpu]
[Thu Oct 17 16:43:37 2019] kfd_process_notifier_release+0x1be/0x220
[amdgpu]
[Thu Oct 17 16:43:37 2019] __mmu_notifier_release+0x3e/0xc0
[Thu Oct 17 16:43:37 2019] exit_mmap+0x160/0x1a0
[Thu Oct 17 16:43:37 2019] ? __handle_mm_fault+0xba3/0x1200
[Thu Oct 17 16:43:37 2019] ? exit_robust_list+0x5a/0x110
[Thu Oct 17 16:43:37 2019] mmput+0x4a/0x120
[Thu Oct 17 16:43:37 2019] do_exit+0x284/0xb20
[Thu Oct 17 16:43:37 2019] ? handle_mm_fault+0xfa/0x200
[Thu Oct 17 16:43:37 2019] do_group_exit+0x3a/0xa0
[Thu Oct 17 16:43:37 2019] __x64_sys_exit_group+0x14/0x20
[Thu Oct 17 16:43:37 2019] do_syscall_64+0x4f/0x100
[Thu Oct 17 16:43:37 2019] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Suggested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This makes possible the vmid pasid mapping query through software.
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
KFD (kernel fusion driver) is the kernel driver
for the compute backend for usermode compute
stack.
v2: squash in updates (Alex)
v3: squash in rebase fixes (Alex)
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Signed-off-by: Philip Cox <Philip.Cox@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Existing QUEUE_TYPE_SDMA means PCIe optimized SDMA queues.
Introduce a new QUEUE_TYPE_SDMA_XGMI, which is optimized
for non-PCIe transfer such as XGMI.
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
MEC FW for some new asic requires all SDMA MQDs to be in a continuous
trunk of memory right after HIQ MQD. Add a field in device queue manager
to hold the HIQ/SDMA MQD memory object and allocate MQD trunk on device
queue manager initialization.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Previously mqd managers was initialized on demand. As there
are only a few type of mqd managers, the on demand initialization
doesn't save too much memory. Initialize them on device
queue initialization instead and delete the get_mqd_manager
interface. This makes codes more organized for future changes.
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Global function mqd_manager_init just calls asic-specific functions and it
is not necessary. Delete it and introduce a mqd_manager_init interface in
dqm for asic-specific mqd manager init. Call mqd_manager_init interface
directly to initialize mqd manager
Signed-off-by: Oak Zeng <ozeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Maximumly support 64 sdma queues
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Vega20 supports 8 SDMA queues per engine
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Wavefront context save data is of interest to userspace clients for
debugging static wavefront state. The MQD contains two parameters
required to parse the control stack and the control stack itself
is kept in the MQD from gfx9 onwards.
Add an ioctl to fetch the context save area and control stack offsets
and to copy the control stack to a userspace address if it is kept in
the MQD.
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
On Raven there is only one SDMA engine instead of previously assumed two,
so we need to adapt our code to this new scenario.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This will make reading code much easier.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The reset will be performed in a new hw_exception work thread to
handle HWS hang without blocking the thread that detected the hang.
Signed-off-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
This is needed to prevent deadlocks when MMU notifiers run in
reclaim-FS context and take the DQM lock for userptr evictions.
Previously this was done by making all memory allocations under
DQM locks GFP_NOIO. This is error prone. Using
memalloc_nofs_save/restore will reliably affect all memory
allocations anywhere in the kernel while the DQM lock is held.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Signed-off-by: John Bridgman <john.bridgman@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
When the TTM memory manager in KGD evicts BOs, all user mode queues
potentially accessing these BOs must be evicted temporarily. Once
user mode queues are evicted, the eviction fence is signaled,
allowing the migration of the BO to proceed.
A delayed worker is scheduled to restore all the BOs belonging to
the evicted process and restart its queues.
During suspend/resume of the GPU we also evict all processes to allow
KGD to save BOs in system memory, since VRAM will be lost.
v2:
* Account for eviction when updating of q->is_active in MQD manager
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
GFXv7 and v8 dGPUs use a different addressing mode for KFD compared
to APUs (GPUVM64 vs HSA64). And dGPUs don't support MTYPE_CC. They
use MTYPE_UC instead for memory that requires coherency.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Some dGPUs don't support HWS. Allow them to use a per-device
sched_policy that may be different from the global default.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
A second-level user mode trap handler can be installed. The CWSR trap
handler jumps to the secondary trap handler conditionally for any
conditions not handled by it. This can be used e.g. for debugging or
catching math exceptions.
When CWSR is disabled, the user mode trap handler is installed as
first level trap handler.
Signed-off-by: Shaoyun.liu <shaoyun.liu@amd.com>
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Remove empty initialize function.
Rename register_process to update_qpd to avoid confusion with the
non-ASIC-specific register_process.
Shorten ops_asic_specific to asic_ops.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Separate device queue termination from process queue manager
termination. Unmap all queues at once instead of one at a time.
Unmap device queues before the PASID is unbound, in the
kfd_process_iommu_unbind_callback.
When resetting wavefronts in non-HWS mode, do it before the VMID is
released.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: shaoyun liu <shaoyun.liu@amd.com>
Signed-off-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Yong Zhao <Yong.Zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
The hard-coded values related to VMID were removed in KFD, as those
values can be calculated in the KFD initialization function.
v2: remove unnecessary local variable
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Adjust latencies and timeouts for dequeueing with HWS and consolidate
them in one place. Make them longer to allow long running waves to
complete without causing a timeout. The timeout is twice as long as the
latency plus some buffer to make sure we don't detect a timeout
prematurely.
Change timeouts for dequeueing HQDs without HWS. KFD_UNMAP_LATENCY is
more consistent with what the HWS does for user queues.
Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Dead code.
Change-Id: Ic0bb1bcca87e96bc5e8fa9894727b0de152e8818
Signed-off-by: Jay Cornwall <Jay.Cornwall@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Update the KGD to KFD interface to allow sharing pipes with queue
granularity instead of pipe granularity.
This allows for more interesting pipe/queue splits.
v2: fix overflow check for res.queue_mask
v3: fix shift overflow when setting res.queue_mask
v4: fix comment in is_pipeline_enabled()
v5: clamp res.queue_mask to the first MEC only
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
- inline functions need to be static inline, otherwise gcc can opt to
not inline and the linker gets unhappy.
- no forward decls for inline functions, just include the right headers.
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Ben Goz <ben.goz@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1466500235-21282-2-git-send-email-daniel.vetter@ffwll.ch
|
|
This patch adds support for static user-mode queues in QCM.
Queues which are designated as static can NOT be preempted by
the CP microcode when it is executing its scheduling algorithm.
This is needed for supporting the debugger feature, because we
can't allow the CP to preempt queues which are currently being debugged.
The number of queues that can be designated as static is limited by the
number of HQDs (Hardware Queue Descriptors).
Signed-off-by: Yair Shachar <yair.shachar@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
|
|
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch creates a new structure for asic specific operations, instead
of using the existing structure of operations.
This is done to make the code flow more logic, readable and maintainable.
The change is done only to the device queue manager module at this point.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
get_pipes_num() calls BUG_ON so we can't set it as inline because it produces a
warning as BUG_ON() uses static variables when it is expanded.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
This patch fixes a bug in the initialization of the pipelines. The
init_pipelines() function was called with a constant value of 0 in the
first_pipe argument. This is an error because amdkfd doesn't handle pipe 0.
The correct way is to pass the value that get_first_pipe() returns as the
argument for first_pipe.
This bug appeared in 3.19 (first version with amdkfd) and it causes around 15%
drop in CPU performance of Kaveri (A10-7850).
v2: Don't set get_first_pipe() as inline because it calls BUG_ON()
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Michel Dänzer <michel.daenzer@amd.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into drm-next
This backmerges drm-fixes into drm-next mainly for the amdkfd
stuff, I'm not 100% confident, but it builds and the amdkfd
folks can fix anything up.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Conflicts:
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c
drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.h
|
|
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch replaces the two current amdkfd module parameters with a new one.
The current parameters that are being replaced are:
- Maximum number of HSA processes
- Maximum number of queues per process
The new parameter that replaces them is called "Maximum queues per device"
This replacement achieves two goals:
- Allows the user to have as many HSA processes as it wants (until
a maximum of 512 HSA processes in Kaveri).
- Removes the limitation the user had on maximum number of queues per HSA
process. E.g. the user can now have processes which only have one queue and
other processes which have hundreds of queues, while before the user
couldn't have more than 128 queues per process (as default).
The default value of the new parameter is 4096 (32 * 128, which were the
defaults of the old parameters). There is almost no additional GART memory
required for the default case. As a reminder, this amount of queues requires a
little bit below 4MB of GART memory.
v2:
In addition, This patch defines a new counter for queues accounting in the DQM
structure. This is done because the current counter only counts active queues
which allows the user to create more queues than the
max_num_of_queues_per_device module parameter allows.
However, we need the current counter for the runlist packet build process, so
the solution is to have a dedicated counter for this accounting.
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Ben Goz <ben.goz@amd.com>
|
|
This patch starts to add support for the VI APU in the DQM module.
Because most (more than 90%) of the DQM code is shared among AMD's APUs, we
chose a design that performs most/all the code in the shared DQM file
(kfd_device_queue_manager.c). If there is H/W specific code to be executed,
than it is written in an asic-specific extension function for that H/W.
That asic-specific extension function is called from the shared function at the
appropriate time. This requires that for every asic-specific extension function
that is implemented in a specific ASIC, there will be an equivalent
implementation in ALL ASICs, even if those implementations are just stubs.
That way we achieve:
- Maintainability: by having one copy of most of the code, we only need to
fix bugs at one locations
- Readability: very clear what is the shared code and what is done per ASIC
- Extensibility: very easy to add new H/W specific files/functions
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch does some re-org on the device_queue_manager structure. It takes out
all the function pointers from the structure and puts them in a new structure,
called device_queue_manager_ops. Then, it puts an instance of that structure
inside device_queue_manager.
This re-org is done to prepare the DQM module to support more than one AMD APU
(Kaveri).
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This patch adds support for SDMA user-mode queues to the QCM - the Queue
management system that manages queues-per-device and queues-per-process.
v2: Remove calls to interface function that initializes sdma engines.
v3: Use the new names of some of the defines.
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
|
|
The queue scheduler divides into two sections, one section is process bounded
and the other section is device bounded.
The device bounded section is handled by this module.
The DQM module handles queue setup, update and tear-down from the device side.
It also supports suspend/resume operation.
v3: Changed device_init, added the use of the new gart allocation functions an
Added documentation.
v4:
Fixed a race in DQM queue scheduler where dqm->lock must be held when accessing
dqm->queue_count and dqm->processes_count. This fixes runlist IB allocation
failures when DQM is under load.
Fixed race in DQM queue destruction where queues being destroyed must be
removed from qpd->queues_list prior to preemption, or concurrent queue
creation activity may reschedule them while their MQD is destroyed.
Fixed EOP queue size setting in CP_HPD_EOP_CONTROL, because the size is
specified as (log2(size_dwords)-1). The previous calculation assumed the
size was specified in bytes, which caused interference between EOP queues
when multiple MEC pipelines were active.
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime
Remove unused unmap_queue function
Various fixes (Style, typos)
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|
|
The kernel queue module enables the amdkfd to establish kernel queues, not
exposed to user space.
The kernel queues are used for HIQ (HSA Interface Queue) and DIQ (Debug
Interface Queue) operations
v3: Removed use of internal typedefs and added use of the new gart allocation
functions
v4: Fixed a miscalculation in kernel queue wrapping
v5:
Move amdkfd from drm/radeon/ to drm/amd/
Change format of mqd structure to match latest KV firmware
Add support for AQL queues creation to enable working with open-source HSA
runtime
Add define for kernel queue size
Various fixes
Signed-off-by: Ben Goz <ben.goz@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
|