summaryrefslogtreecommitdiffstats
path: root/drivers/firmware/efi
AgeCommit message (Collapse)Author
2020-05-20efi/gop: Add an option to list out the available GOP modesArvind Sankar
Add video=efifb:list option to list the modes that are available. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-20-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-20efi/libstub: Add definitions for console input and eventsArvind Sankar
Add the required typedefs etc for using con_in's simple text input protocol, and for using the boottime event services. Also add the prototype for the "stall" boot service. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-19-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-20efi/libstub: Implement printk-style loggingArvind Sankar
Use the efi_printk function in efi_info/efi_err, and add efi_debug. This allows formatted output at different log levels. Add the notion of a loglevel instead of just quiet/not-quiet, and parse the efi=debug kernel parameter in addition to quiet. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200520170223.GA3333632@rani.riverdale.lan/ Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19ARM: decompressor: run decompressor in place if loaded via UEFIArd Biesheuvel
The decompressor can load from anywhere in memory, and the only reason the EFI stub code relocates it is to ensure it appears within the first 128 MiB of memory, so that the uncompressed kernel ends up at the right offset in memory. We can short circuit this, and simply jump into the decompressor startup code at the point where it knows where the base of memory lives. This also means there is no need to disable the MMU and caches, create new page tables and re-enable them. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
2020-05-19efi/printf: Turn vsprintf into vsnprintfArvind Sankar
Implement vsnprintf instead of vsprintf to avoid the possibility of a buffer overflow. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-17-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Abort on invalid formatArvind Sankar
If we get an invalid conversion specifier, bail out instead of trying to fix it up. The format string likely has a typo or assumed we support something that we don't, in either case the remaining arguments won't match up with the remaining format string. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-16-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Refactor code to consolidate padding and outputArvind Sankar
Consolidate the actual output of the formatted text into one place. Fix a couple of edge cases: 1. If 0 is printed with a precision of 0, the printf specification says that nothing should be output, with one exception (2b). 2. The specification for octal alternate format (%#o) adds the leading zero not as a prefix as the 0x for hexadecimal is, but by increasing the precision if necessary to add the zero. This means that a. %#.2o turns 8 into "010", but 1 into "01" rather than "001". b. %#.o prints 0 as "0" rather than "", unlike the situation for decimal, hexadecimal and regular octal format, which all output an empty string. Reduce the space allocated for printing a number to the maximum actually required (22 bytes for a 64-bit number in octal), instead of the 66 bytes previously allocated. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-15-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Handle null string inputArvind Sankar
Print "(null)" for 's' if the input is a NULL pointer. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-14-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Factor out integer argument retrievalArvind Sankar
Factor out the code to get the correct type of numeric argument into a helper function. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-13-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Factor out width/precision parsingArvind Sankar
Factor out the width/precision parsing into a helper function. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-12-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Merge 'p' with the integer formatsArvind Sankar
Treat 'p' as a hexadecimal integer with precision equal to the number of digits in void *. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-11-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Fix minor bug in precision handlingArvind Sankar
A negative precision should be ignored completely, and the presence of a valid precision should turn off the 0 flag. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-10-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Factor out flags parsing and handle '%' earlierArvind Sankar
Move flags parsing code out into a helper function. The '%%' case can be handled up front: it is not allowed to have flags, width etc. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-9-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Add 64-bit and 8-bit integer supportArvind Sankar
Support 'll' qualifier for long long by copying the decimal printing code from lib/vsprintf.c. For simplicity, the 32-bit code is used on 64-bit architectures as well. Support 'hh' qualifier for signed/unsigned char type integers. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-8-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/printf: Drop %n format and L qualifierArvind Sankar
%n is unused and deprecated. The L qualifer is parsed but not actually implemented. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-7-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/libstub: Optimize for size instead of speedArvind Sankar
Reclaim the bloat from the addition of printf by optimizing the stub for size. With gcc 9, the text size of the stub is: ARCH before +printf -Os arm 35197 37889 34638 arm64 34883 38159 34479 i386 18571 21657 17025 x86_64 25677 29328 22144 Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-6-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/libstub: Add a basic printf implementationArvind Sankar
Copy vsprintf from arch/x86/boot/printf.c to get a simple printf implementation. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-5-nivedita@alum.mit.edu [ardb: add some missing braces in if...else clauses] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/libstub: Buffer output of efi_putsArvind Sankar
Use a buffer to convert the string to UTF-16. This will reduce the number of firmware calls required to print the string from one per character to one per string in most cases. Cast the input char to unsigned char before converting to efi_char16_t to avoid sign-extension in case there are any non-ASCII characters in the input. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-4-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/libstub: Rename efi_[char16_]printk to efi_[char16_]putsArvind Sankar
These functions do not support formatting, unlike printk. Rename them to puts to make that clear. Move the implementations of these two functions next to each other. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-3-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-19efi/libstub: Include dependencies of efistub.hArvind Sankar
Add #include directives for include files that efistub.h depends on, instead of relying on them having been included by the C source files prior to efistub.h. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200518190716.751506-2-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-17tpm: check event log version before reading final eventsLoïc Yhuel
This fixes the boot issues since 5.3 on several Dell models when the TPM is enabled. Depending on the exact grub binary, booting the kernel would freeze early, or just report an error parsing the final events log. We get an event log in the SHA-1 format, which doesn't have a tcg_efi_specid_event_head in the first event, and there is a final events table which doesn't match the crypto agile format. __calc_tpm2_event_size reads bad "count" and "efispecid->num_algs", and either fails, or loops long enough for the machine to be appear frozen. So we now only parse the final events table, which is per the spec always supposed to be in the crypto agile format, when we got a event log in this format. Fixes: c46f3405692de ("tpm: Reserve the TPM final events table") Fixes: 166a2809d65b2 ("tpm: Don't duplicate events from the final event log in the TCG2 log") Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1779611 Signed-off-by: Loïc Yhuel <loic.yhuel@gmail.com> Link: https://lore.kernel.org/r/20200512040113.277768-1-loic.yhuel@gmail.com Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Matthew Garrett <mjg59@google.com> [ardb: warn when final events table is missing or in the wrong format] Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-17efi: Pull up arch-specific prototype efi_systab_show_arch()Benjamin Thiel
Pull up arch-specific prototype efi_systab_show_arch() in order to fix a -Wmissing-prototypes warning: arch/x86/platform/efi/efi.c:957:7: warning: no previous prototype for ‘efi_systab_show_arch’ [-Wmissing-prototypes] char *efi_systab_show_arch(char *str) Signed-off-by: Benjamin Thiel <b.thiel@posteo.de> Link: https://lore.kernel.org/r/20200516132647.14568-1-b.thiel@posteo.de Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-15efi/libstub: Disable Shadow Call StackSami Tolvanen
Shadow stacks are not available in the EFI stub, filter out SCS flags. Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Will Deacon <will@kernel.org>
2020-05-14efi: cper: Add support for printing Firmware Error Record ReferencePunit Agrawal
While debugging a boot failure, the following unknown error record was seen in the boot logs. <...> BERT: Error records from previous boot: [Hardware Error]: event severity: fatal [Hardware Error]: Error 0, type: fatal [Hardware Error]: section type: unknown, 81212a96-09ed-4996-9471-8d729c8e69ed [Hardware Error]: section length: 0x290 [Hardware Error]: 00000000: 00000001 00000000 00000000 00020002 ................ [Hardware Error]: 00000010: 00020002 0000001f 00000320 00000000 ........ ....... [Hardware Error]: 00000020: 00000000 00000000 00000000 00000000 ................ [Hardware Error]: 00000030: 00000000 00000000 00000000 00000000 ................ <...> On further investigation, it was found that the error record with UUID (81212a96-09ed-4996-9471-8d729c8e69ed) has been defined in the UEFI Specification at least since v2.4 and has recently had additional fields defined in v2.7 Section N.2.10 Firmware Error Record Reference. Add support for parsing and printing the defined fields to give users a chance to figure out what went wrong. Signed-off-by: Punit Agrawal <punit1.agrawal@toshiba.co.jp> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Borislav Petkov <bp@alien8.de> Cc: James Morse <james.morse@arm.com> Cc: linux-acpi@vger.kernel.org Cc: linux-efi@vger.kernel.org Link: https://lore.kernel.org/r/20200512045502.3810339-1-punit1.agrawal@toshiba.co.jp Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-14efi/libstub/x86: Avoid EFI map buffer alloc in allocate_e820()Lenny Szubowicz
In allocate_e820(), call the EFI get_memory_map() service directly instead of indirectly via efi_get_memory_map(). This avoids allocation of a buffer and return of the full EFI memory map, which is not needed here and would otherwise need to be freed. Routine allocate_e820() only needs to know how many EFI memory descriptors there are in the map to allocate an adequately sized e820ext buffer, if it's needed. Note that since efi_get_memory_map() returns a memory map buffer sized with extra headroom, allocate_e820() now needs to explicitly factor that into the e820ext size calculation. Signed-off-by: Lenny Szubowicz <lszubowi@redhat.com> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-12efi/earlycon: Fix early printk for wider fontsDave Young
When I play with terminus fonts I noticed the efi early printk does not work because the earlycon code assumes font width is 8. Here add the code to adapt with larger fonts. Tested with all kinds of kernel built-in fonts on my laptop. Also tested with a local draft patch for 14x28 !bold terminus font. Signed-off-by: Dave Young <dyoung@redhat.com> Link: https://lore.kernel.org/r/20200412024927.GA6884@dhcp-128-65.nay.redhat.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-09gcc-10: mark more functions __init to avoid section mismatch warningsLinus Torvalds
It seems that for whatever reason, gcc-10 ends up not inlining a couple of functions that used to be inlined before. Even if they only have one single callsite - it looks like gcc may have decided that the code was unlikely, and not worth inlining. The code generation difference is harmless, but caused a few new section mismatch errors, since the (now no longer inlined) function wasn't in the __init section, but called other init functions: Section mismatch in reference from the function kexec_free_initrd() to the function .init.text:free_initrd_mem() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memremap() Section mismatch in reference from the function tpm2_calc_event_log_size() to the function .init.text:early_memunmap() So add the appropriate __init annotation to make modpost not complain. In both cases there were trivially just a single callsite from another __init function. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-05-06efi/libstub: Correct comment typosJoe Perches
Fix a couple typos in comments. Signed-off-by: Joe Perches <joe@perches.com> Link: https://lore.kernel.org/r/ec53e67b3ac928922807db3cb1585e911971dadc.1588273612.git.joe@perches.com Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-05efi/libstub: Make efi_printk() input argument const char*Ard Biesheuvel
To help the compiler figure out that efi_printk() will not modify the string it is given, make the input argument type const char*. While at it, simplify the implementation as well. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-05efi/libstub/x86: Work around LLVM ELF quirk build regressionArd Biesheuvel
When building the x86 EFI stub with Clang, the libstub Makefile rules that manipulate the ELF object files may throw an error like: STUBCPY drivers/firmware/efi/libstub/efi-stub-helper.stub.o strip: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10 objcopy: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10 This is the result of a LLVM feature [0] where symbol references are stored in a LLVM specific .llvm_addrsig section in a non-transparent way, causing generic ELF tools such as strip or objcopy to choke on them. So force the compiler not to emit these sections, by passing the appropriate command line option. [0] https://sourceware.org/bugzilla/show_bug.cgi?id=23817 Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Sami Tolvanen <samitolvanen@google.com> Reported-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: Fangrui Song <maskray@google.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-05efi/libstub: Fix mixed mode boot issue after macro refactorArvind Sankar
Commit 22090f84bc3f ("efi/libstub: unify EFI call wrappers for non-x86") refactored the macros that are used to provide wrappers for mixed-mode calls on x86, allowing us to boot a 64-bit kernel on 32-bit firmware. Unfortunately, this broke mixed mode boot due to the fact that efi_is_native() is not a macro on x86. All of these macros should go together, so rather than testing each one to see if it is defined, condition the generic macro definitions on a new ARCH_HAS_EFISTUB_WRAPPERS, and remove the wrapper definitions on x86 as well if CONFIG_EFI_MIXED is not enabled. Fixes: 22090f84bc3f ("efi/libstub: unify EFI call wrappers for non-x86") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200504150248.62482-1-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/libstub: Check return value of efi_parse_optionsArvind Sankar
efi_parse_options can fail if it is unable to allocate space for a copy of the command line. Check the return value to make sure it succeeded. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-12-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/x86: Support builtin command lineArvind Sankar
Add support for the x86 CMDLINE_BOOL and CMDLINE_OVERRIDE configuration options. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-11-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/libstub: Unify initrd loading across architecturesArvind Sankar
Factor out the initrd loading into a common function that can be called both from the generic efi-stub.c and the x86-specific x86-stub.c. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-10-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/x86: Move command-line initrd loading to efi_mainArvind Sankar
Consolidate the initrd loading in efi_main. The command line options now need to be parsed only once. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-9-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/libstub: Upgrade ignored dtb= argument message to errorArvind Sankar
Use efi_err if we ignore a command-line dtb= argument, so that it shows up even on a quiet boot. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-8-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/tpm: Use efi_err for error messagesArvind Sankar
Use efi_err instead of bare efi_printk for error messages. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-7-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/gop: Use efi_err for error messagesArvind Sankar
Use efi_err instead of bare efi_printk for error messages. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-6-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/x86: Use efi_err for error messagesArvind Sankar
Use efi_err instead of bare efi_printk for error messages. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-5-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/libstub: Move pr_efi/pr_efi_err into efi namespaceArvind Sankar
Rename pr_efi to efi_info and pr_efi_err to efi_err to make it more obvious that they are part of the EFI stub and not generic printk infra. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-4-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/libstub: Add a helper function to split 64-bit valuesArvind Sankar
In several places 64-bit values need to be split up into two 32-bit fields, in order to be backward-compatible with the old 32-bit ABIs. Instead of open-coding this, add a helper function to set a 64-bit value as two 32-bit fields. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-3-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-05-01efi/x86: Use correct size for boot_paramsArvind Sankar
struct boot_params is only 4096 bytes, not 16384. Fix this by using sizeof(struct boot_params) instead of hardcoding the incorrect value. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Link: https://lore.kernel.org/r/20200430182843.2510180-2-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-04-30efi/libstub: Avoid returning uninitialized data from setup_graphics()Heinrich Schuchardt
Currently, setup_graphics() ignores the return value of efi_setup_gop(). As AllocatePool() does not zero out memory, the screen information table will contain uninitialized data in this case. We should free the screen information table if efi_setup_gop() returns an error code. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Link: https://lore.kernel.org/r/20200426194946.112768-1-xypron.glpk@gmx.de Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-04-25efi/libstub: Re-enable command line initrd loading for x86Ard Biesheuvel
Commit: cf6b83664895a5 ("efi/libstub: Make initrd file loader configurable") inadvertently disabled support on x86 for loading an initrd passed via the initrd= option on the kernel command line. Add X86 to the newly introduced Kconfig option's title and depends declarations, so it gets enabled by default, as before. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: linux-efi@vger.kernel.org
2020-04-24efi: Move arch_tables check to callerArd Biesheuvel
Instead of making match_config_table() test its table_types pointer for NULL-ness, omit the call entirely if no arch_tables pointer was provided to efi_config_parse_tables(). Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-04-24efi: Clean up config table description arraysArd Biesheuvel
Increase legibility by adding whitespace to the efi_config_table_type_t arrays that describe which EFI config tables we look for when going over the firmware provided list. While at it, replace the 'name' char pointer with a char array, which is more space efficient on relocatable 64-bit kernels, as it avoids a 8 byte pointer and the associated relocation data (24 bytes when using RELA format) Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-04-24efi/libstub/x86: Avoid getter function for efi_is64Ard Biesheuvel
We no longer need to take special care when using global variables in the EFI stub, so switch to a simple symbol reference for efi_is64. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-04-24efi/libstub: Drop __pure getters for EFI stub optionsArd Biesheuvel
The practice of using __pure getter functions to access global variables in the EFI stub dates back to the time when we had to carefully prevent GOT entries from being emitted, because we could not rely on the toolchain to do this for us. Today, we use the hidden visibility pragma for all EFI stub source files, which now all live in the same subdirectory, and we apply a sanity check on the objects, so we can get rid of these getter functions and simply refer to global data objects directly. So switch over the remaining boolean variables carrying options set on the kernel command line. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-04-24efi/libstub: Drop __pure getter for efi_system_tableArd Biesheuvel
The practice of using __pure getter functions to access global variables in the EFI stub dates back to the time when we had to carefully prevent GOT entries from being emitted, because we could not rely on the toolchain to do this for us. Today, we use the hidden visibility pragma for all EFI stub source files, which now all live in the same subdirectory, and we apply a sanity check on the objects, so we can get rid of these getter functions and simply refer to global data objects directly. Start with efi_system_table(), and convert it into a global variable. While at it, make it a pointer-to-const, because we can. Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
2020-04-24efi: Kill __efistub_globalArvind Sankar
Now that both arm and x86 are using the linker script to place the EFI stub's global variables in the correct section, remove __efistub_global. Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20200416151227.3360778-4-nivedita@alum.mit.edu Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-29 17:54:00 +0000