summaryrefslogtreecommitdiffstats
path: root/drivers/firewire
AgeCommit message (Collapse)Author
2009-03-24firewire: core: optimize propagation of BROADCAST_CHANNELStefan Richter
Cache the test result of whether a device implements BROADCAST_CHANNEL. This minimizes traffic on the bus after each bus reset. A majority of devices does not implement BROADCAST_CHANNEL. Remove busy retries; just rely on the hardware to retry requests to busy responders. Remove unnecessary log messages. Rename the flag is_irm to broadcast_channel_allocated to better reflect its meaning. Reset the flag earlier in fw_core_handle_bus_reset. Pass the generation down as a call parameter; that way generation can't be newer than card->broadcast_channel_allocated and device->node_id. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: core: simplify broadcast channel allocationStefan Richter
fw-iso.c has channel allocation code now, use it. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: core: increase bus manager grace periodStefan Richter
Per IEEE 1394 clause 8.4.2.5, bus manager capable nodes which are not incumbent shall wait at least 125ms before trying to establish themselves as bus manager. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: core: drop unused call parameters of close_transactionStefan Richter
All callers inserted NULL and 0 here. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add closure to async stream ioctlStefan Richter
This changes the as yet unreleased FW_CDEV_IOC_SEND_STREAM_PACKET ioctl to generate an fw_cdev_event_response event just like the other two ioctls for asynchronous request transmission do. This way, clients get feedback on successful or unsuccessful transmission. This also adds input validation for length, tag, channel, sy, speed. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: simplify FW_CDEV_IOC_SEND_REQUEST return valueStefan Richter
This changes the ioctl() return value of FW_CDEV_IOC_SEND_REQUEST and of the as yet unreleased FW_CDEV_IOC_SEND_BROADCAST_REQUEST. They used to return sizeof(struct fw_cdev_send_request *) + data_length which is obviously a failed attempt to emulate the return value of raw1394's respective interface which uses write() instead of ioctl(). However, the first summand, as size of a kernel pointer, is entirely meaningless to clients and the second summand is already known to clients. And the result does not resemble raw1394's write() return code anyway. So simplify it to a constant non-negative value, i.e. 0. The only dangers here would be that future client implementations check for error by ret != 0 instead of ret < 0 when running on top of an old kernel; or that current clients interpret ret = 0 or more as failure. But both are hypothetical cases which don't justify to return irritating values. While we touch this code, also remove "& 0x1f" from tcode in the call of fw_send_request. The tcode cannot be bigger than 0x1f at this point. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: fix race of ioctl_send_request with bus resetStefan Richter
The bus reset handler concurrently frees client->device->node. Use device->node_id instead. This is equivalent to device->node->node_id while device->generation is current. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: secure add_descriptor ioctlStefan Richter
The access permissions and ownership or ACL of /dev/fw* character device files will typically be set based on the device type of the respective nodes, as obtained by firewire-core from descriptors in the device's configuration ROM. An example policy is to deny write permission by default but grant write permission to files of AV/C video and audio devices and IIDC video devices. The FW_CDEV_IOC_ADD_DESCRIPTOR ioctl could be used to partly subvert such a policy: Find a device file with relaxed permissions, use the ioctl to add a descriptor with AV/C marker to the local node's ROM, thus gain access to the local node's character device file. (This is only possible if there are udev scripts installed which actively relax permissions for known device types and if there is a device of such a type connected.) Accessibility of the local node's device file is relevant to host security if the host contains two or more IEEE 1394 link layer controllers which are plugged into a single bus. Therefore change the ABI to deny FW_CDEV_IOC_ADD_DESCRIPTOR if the file belongs to a remote node. (This change has no impact on known implementers of the ABI: None of them uses the ioctl yet.) Also clarify the documentation: The ioctl affects all local nodes, not just one local node. Cc: stable@kernel.org Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: amendment to "add ioctl to query maximum transmission speed"Stefan Richter
The as yet unreleased FW_CDEV_IOC_GET_SPEED ioctl puts only a single integer into the parameter buffer. We can use ioctl()'s return value instead. (Also: Some whitespace change in firewire-cdev.h.) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: broadcast channel supportJay Fenlason
This patch adds the ISO broadcast channel support that is required of a 1394a IRM. In specific, if the local device the IRM, it allocates ISO channel 31 and sets the broadcast channel register of all devices on the local bus to BROADCAST_CHANNEL_INITIAL | BROADCAST_CHANNEL_VALID to indicate that channel 31 can be use for broadcast messages. One minor complication is that on startup the local device may become IRM before all the devices on the bus have been enumerated by the stack. Therefore we have to keep a "the local device is IRM" flag and possibly set the broadcast channel register of new devices at enumeration time. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: implement asynchronous stream transmissionJay Fenlason
Allow userspace and other firewire drivers (fw-ipv4 I'm looking at you!) to send Asynchronous Transmit Streams as described in 7.8.3 of release 1.1 of the 1394 Open Host Controller Interface Specification. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (tweaks)
2009-03-24firewire: core: normalize a function argument nameStefan Richter
It's called "payload" rather than "data" almost everywhere in fw-transaction.c. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: normalize a variable nameStefan Richter
Standardize on if (err) handle_error; and if (ret < 0) handle_error; Don't call a variable err if we store values in it which mean success. Also, offset some return statements by a blank line since this how we do it in drivers/firewire. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: core: remove condition which is always falseStefan Richter
reread_bus_info_block() only gets to see devices whose config_rom_length is at least 6 (ROM header, bus info block, root directory header). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: core: move some functionsStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: core: clean up includesStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: simplify a schedule_delayed_work wrapperStefan Richter
The kernel API documentation says that queue_delayed_work() returns 0 (only) if the work was already queued. The return codes of schedule_delayed_work() are not documented but the same. In init_iso_resource(), the work has never been queued yet, hence we can assume schedule_delayed_work() to be a guaranteed success there. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add ioctls for iso resource management, amendmentStefan Richter
Some fixes: - Remove stale documentation. - Fix a != vs. == thinko that got in the way of channel management. - Try bandwidth deallocation even if channel deallocation failed. A simplification: - fw_cdev_allocate_iso_resource.channels is now ordered like libdc1394's dc1394_iso_allocate_channel() channels_allowed argument. By the way, I looked closer at cards from NEC, TI, and VIA, and noticed that they all don't implement IEEE 1394a behaviour which is meant to deviate from IEEE 1212's notion of lock compare-swap. This means that we have to do two lock transactions instead of one in many cases where one transaction would already succeed on a fully 1394a compliant IRM. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: shut down iso context before freeing the bufferStefan Richter
DMA must be halted before we DMA-unmap and free the DMA buffer. Since we cannot rely on the client to stop the context before it closes the fd, we have to reorder fw_iso_buffer_destroy vs. fw_iso_context_destroy. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: replace some spin_lock_irqsave by spin_lock_irqStefan Richter
All of these functions are entered with IRQs enabled. Hence the unconditional spin_unlock_irq can be used. Function: Caller context: dequeue_event() client process, via read(2) fill_bus_reset_event() fw-device.c update worqueue job release_client_resource() client process, via ioctl(2) fw_device_op_release() client process, via close(2) Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: extend transaction payload size checkStefan Richter
Make the size check of ioctl_send_request and ioctl_send_broadcast_request speed dependent. Also change the error return code from -EINVAL to -EIO to distinguish this from other errors concerning the ioctl parameters. Another payload size limit for which we don't check here though is the remote node's Bus_Info_Block.max_rec. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: restrict broadcast write requests to Units SpaceStefan Richter
We don't want random users write to Memory Space (e.g. PCs with physical DMA filters down) or to core CSRs like Reset_Start. This does not protect SBP-2 target CSRs. But properly behaving SBP-2 targets ignore broadcast write requests to these registers, and the maximum damage which can happen with laxer targets is DOS. But there are ways to create DOS situations anyway if there are devices with weak device file permissions (like audio/video devices) present at the same bus as an SBP-2 target. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add ioctl for broadcast write requestsJay Fenlason, Stefan Richter
Write transactions to the broadcast node ID are a convenient way to trigger functions of multiple nodes at once. IIDC is a protocol which can make use of this if multiple cameras with same command_regs_base are connected at the same bus. Based on Date: Wed, 10 Sep 2008 11:32:16 -0400 From: Jay Fenlason <fenlason@redhat.com> Subject: [patch] SEND_BROADCAST_REQUEST Changes: ioctl_send_request() and ioctl_send_broadcast_request() now share code. Broadcast speed corrected to S100. Check for proper tcode. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add ioctl to query maximum transmission speedStefan Richter
While the speed of asynchronous transactions is automatically chosen by the kernel, the speed of isochronous streams has to be chosen by the initiating client. In case of 1394a bus topologies, the maximum possible speed could be figured out with some effort by evaluation of the remote node's link speed field in the config ROM, the local node's link speed field, and the PHY speeds and topologic information in the local node's or IRM's topology map CSR. However, this does not work in case of 1394b buses. Hence add an ioctl to export the maximum speed which the kernel already determined. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add ioctls for manual iso resource managementStefan Richter
This adds ioctls for allocation and deallocation of a channel or/and bandwidth without auto-reallocation and without auto-deallocation. The benefit of these ioctls is that libraw1394-style isochronous resource management can be implemented without write access to the IRM's character device file. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: add ioctls for isochronous resource managementJay Fenlason, Stefan Richter
Based on Date: Tue, 18 Nov 2008 11:41:27 -0500 From: Jay Fenlason <fenlason@redhat.com> Subject: [Patch V4] Add ISO resource management support with several changes to the ABI and implementation. Only the part of the ABI which enables auto-reallocation and auto-deallocation is included here. This implements ioctls for kernel-assisted allocation of isochronous channels and isochronous bandwidth. The benefits are: - The client does not have to have write access to the /dev/fw* device corresponding to the IRM. - The client does not have to perform reallocation after bus resets. - Channel and bandwidth are deallocated by the kernel if the file is closed before the client deallocated the resources. Thus resources are released even if the client crashes. It is anticipated that future in-kernel code (firewire-core IRM code; the firewire port of firedtv), will use the fw-iso.c portions of this code too. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: David Moore <dcm@acm.org>
2009-03-24firewire: core: topology header fixStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: sort includesStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: unify names of struct types and of their instancesStefan Richter
to indicate that they are specializations of struct event or of struct client_resource, respectively. struct response was both an event and a client_resource; it is now split into struct outbound_transaction_resource and ~_event in order to document more explicitly which types of client resources exist. struct request and struct_request_event are renamed to struct inbound_transaction_resource and ~_event because requests and responses occur in outbound and in inbound transactions. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: reference-count client instancesStefan Richter
The lifetime of struct client instances must be longer than the lifetime of any client resource. This fixes a possible race between fw_device_op_release and transaction completions. It also prepares for new ioctls for isochronous resource management which will involve delayed processing of client resources. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Reviewed-by: David Moore <dcm@acm.org>
2009-03-24firewire: prevent creation of multiple IR DMA contexts for the same channelStefan Richter
OHCI-1394 1.1 clause 10.4.3 says: "If more than one IR DMA context specifies receives for packets from the same isochronous channel, the context destination for that channel's packets is undefined." Any userspace client and in the future also kernelspace clients can allocate IR DMA contexts for any channel. We don't want them to interfere with each other, hence it is preferable to return -EBUSY if allocation of a second context for a channel is attempted. Notes: - This limitation is OHCI-1394 specific, therefore its proper place of implementation is down in the low-level driver. - Since the <linux/firewire-cdev.h> ABI simply maps one userspace iso client context to one hardware iso context, this OHCI-1394 limitation alas requires userspace to implement its own multiplexing of iso reception from the same channel and card to multiple clients when needed. - The limitation is independent of channel allocation at the IRM; the latter is really only important for the initiation of iso transmission but not of iso reception. - We don't need to do the same for IT DMA because OHCI-1394 does not have any ties between IT contexts and channels. Only the voluntary channel allocation protocol via the IRM, globally to the FireWire bus, can ensure proper isochronous transmit behaviour anyway. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: use list_first_entryStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: core: remove unused definitionsStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: remove line breaks before function namesStefan Richter
type function_name(parameters); is nice to look at but was not used consistently. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: standardize a variable nameStefan Richter
"ret" is the new "retval". Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: core: remove obsolete assertionsStefan Richter
This code never changes. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: core: remove outdated commentStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: address handler input validationStefan Richter
Like before my commit 1415d9189e8c59aa9c77a3bba419dcea062c145f, fw_core_add_address_handler() does not align the address region now. Instead the caller is required to pass valid parameters. Since one of the callers of fw_core_add_address_handler() is the cdev userspace interface, we now check for valid input. If the client is buggy, we give it a hint with -EINVAL. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: use an idr rather than a linked list for resourcesJay Fenlason
The current code uses a linked list and a counter for storing resources and the corresponding handle numbers. By changing to an idr we can be safe from counter wrap-around giving two resources the same handle. Furthermore, the deallocation ioctls now check whether the resource to be freed is of the intended type. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Some rework by Stefan R: - The idr API documentation says we get an ID within 0...0x7fffffff. Hence we can rest assured that idr handles fit into cdev handles. - Fix some races. Add a client->in_shutdown flag for this purpose. - Add allocation retry to add_client_resource(). - It is possible to use idr_for_each() in fw_device_op_release(). - Fix ioctl_send_response() regression. - Small style changes. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: fix race of fw_device_op_release with bus resetStefan Richter
Unlink the client from the fw_device earlier in order to prevent bus reset events being added to client->event_list during shutdown. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: cdev: tcodes input validationStefan Richter
The behaviour of fw-transaction.c::fw_send_request is ill-defined for any other tcodes than read/ write/ lock request tcodes. Therefore prevent requests with wrong tcodes from entering the transaction layer. Maybe fw_send_request should check them itself, but I am not inclined to change it and fw_fill_request from void-valued functions to ones which return error codes and pass those up. Besides, maybe fw_send_request is going to support one more tcode than ioctl_send_request in the future (TCODE_STREAM_DATA). Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: convert client_list_lock to mutexStefan Richter
So far it is only taken in non-atomic contexts. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: add a client_list_lockJay Fenlason
This adds a client_list_lock, which only protects the device's client_list, so that future versions of the driver can call code that takes the card->lock while holding the client_list_lock. Adding this lock is much simpler than adding __ versions of all the functions that the future version may need. The one ordering issue is to make sure code never takes the client_list_lock with card->lock held. Since client_list_lock is only used in three places, that isn't hard. Signed-off-by: Jay Fenlason <fenlason@redhat.com> Update fill_bus_reset_event() accordingly. Include linux/spinlock.h. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-03-24firewire: Include iso timestamp in headers when header_size > 4David Moore
Previously, when an iso context had header_size > 4, the iso header (len/tag/channel/tcode/sy) was passed to userspace followed by quadlets stripped from the payload. This patch changes the behavior: header_size = 8 now passes the header quadlet followed by the timestamp quadlet. When header_size > 8, quadlets are stripped from the payload. The header_size = 4 case remains identical. Since this alters the semantics of the API, the firewire API version needs to be bumped concurrently with this change. This change also refactors the header copying code slightly to be much easier to read. Signed-off-by: David Moore <dcm@acm.org> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-02-01firewire: core: Remove card from list of cards when enable failsPetr Vandrovec
Signed-off-by: Petr Vandrovec <petr@vandrovec.name> After a controller initialization failure, addition of another card got stuck due to card_list corruption. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-01-29firewire: sbp2: add workarounds for 2nd and 3rd generation iPodsStefan Richter
According to https://bugs.launchpad.net/bugs/294391 - 3rd generation iPods need the "fix capacity" workaround after all (apparently they crash after the last sector was accessed), - 2nd generation iPods need the "128 kB maximum request size" workaround. Alas both iPod generations feature the same model ID in the config ROM, hence we can only define a shared quirks list entry for them. Luckily the fix capacity workaround did not show a negative effect in Jarod's tests with 2nd gen. iPod. A side note: Apple computers in target mode (or at least an x86 Mac mini) don't have firmware_version and model_id, hence none of the iPod quirks list entries is active for them. Tested-by: Jarod Wilson <jarod@redhat.com> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-01-28firewire: sbp2: fix DMA mapping leak on the failure pathStefan Richter
Reported-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> who also provided a first version of the fix. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-01-28firewire: sbp2: define some magic numbers as macrosStefan Richter
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-01-28firewire: sbp2: fix payload limit at S1600 and S3200Stefan Richter
1394-2008 clause 16.3.4.1 (1394b-2002 clause 16.3.1.1) defines tighter limits than 1394-2008 clause 6.2.2.3 (1394a-2000 clause 6.2.2.3). Our previously too large limit doesn't matter though if the controller reports its max_receive correctly. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
2009-01-24firewire: core: optimize card shutdownStefan Richter
This fixes a regression by "firewire: keep highlevel drivers attached during brief connection loss": There were 2 seconds unnecessary waiting added to the shutdown procedure of each controller. We use card->link as status flag to signal the device handler that there is no use to wait for a come-back. Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>