summaryrefslogtreecommitdiffstats
path: root/drivers/clk/renesas
AgeCommit message (Collapse)Author
2019-05-15clk: Remove io.h from clk-provider.hStephen Boyd
Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-05-07Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' ↵Stephen Boyd
and 'clk-spdx' into clk-next - Support for STM32F769 - Rework AT91 sckc DT bindings - Fix slow RC oscillator issue on sama5d3 - AT91 sam9x60 PMC support - SiFive FU540 PRCI and PLL support * clk-stm32f4: clk: stm32mp1: Add ddrperfm clock clk: stm32: Introduce clocks of STM32F769 board * clk-tegra: clk: tegra: divider: Mark Memory Controller clock as read-only clk: tegra: emc: Replace BUG() with WARN_ONCE() clk: tegra: emc: Fix EMC max-rate clamping clk: tegra: emc: Support multiple RAM codes clk: tegra: emc: Don't enable EMC clock manually clk: tegra124: Remove lock-enable bit from PLLM clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider clk: tegra: Don't enable already enabled PLLs * clk-at91: clk: at91: Mark struct clk_range as const clk: at91: add sam9x60 pmc driver dt-bindings: clk: at91: add bindings for SAM9X60 pmc clk: at91: add sam9x60 PLL driver clk: at91: master: Add sam9x60 support clk: at91: usb: Add sam9x60 support clk: at91: allow configuring generated PCR layout clk: at91: allow configuring peripheral PCR layout clk: at91: sckc: handle different RC startup time clk: at91: modernize sckc binding dt-bindings: clock: at91: new sckc bindings * clk-sifive-fu540: clk: sifive: add a driver for the SiFive FU540 PRCI IP block clk: analogbits: add Wide-Range PLL library dt-bindings: clk: add documentation for the SiFive PRCI driver * clk-spdx: clk: sunxi-ng: Use the correct style for SPDX License Identifier clk: sprd: Use the correct style for SPDX License Identifier clk: renesas: Use the correct style for SPDX License Identifier clk: qcom: Use the correct style for SPDX License Identifier clk: davinci: Use the correct style for SPDX License Identifier clk: actions: Use the correct style for SPDX License Identifier
2019-05-01clk: renesas: Use the correct style for SPDX License IdentifierNishad Kamdar
This patch corrects the SPDX License Identifier style in header files related to Clock Drivers for Renesas Socs. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used) Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46 Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-11clk: renesas: rcar-gen3: Remove unused variableStephen Boyd
This variable is no longer used and the compiler rightly complains that it should be removed. Drop it to silence the following: drivers/clk/renesas/rcar-gen3-cpg.c: In function 'cpg_sd_clk_register': drivers/clk/renesas/rcar-gen3-cpg.c:386:15: warning: unused variable 'i' [-Wunused-variable] unsigned int i; Cc: Geert Uytterhoeven <geert+renesas@glider.be> Fixes: b953eaaeb58e ("clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return value") Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-04clk: renesas: rcar-gen3: Fix cpg_sd_clock_round_rate() return valueTakeshi Kihara
cpg_sd_clock_round_rate() may return an unsupported clock rate for the requested clock rate. Therefore, when cpg_sd_clock_set_rate() sets the clock rate acquired by cpg_sd_clock_round_rate(), an error may occur. This is not conform the clk API design. This patch fixes that by making sure cpg_sd_clock_calc_div() considers only the division values defined in cpg_sd_div_table[]. With this fix, the cpg_sd_clock_round_rate() always return a support clock rate. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Fixes: 90c073e53909da85 ("clk: shmobile: r8a7795: Add SD divider support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: r8a77980: Fix RPC-IF module clock's parentSergei Shtylyov
Testing has shown that the RPC-IF module clock's parent is the RPCD2 clock, not the RPC one -- the RPC-IF register reads stall otherwise... Fixes: 94e3935b5756 ("clk: renesas: r8a77980: Add RPC clocks") Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Rename DRIF clocksTakeshi Kihara
According to the R-Car Gen3 Hardware Manual Errata for Rev. 1.50 of Feb 12, 2019, the DRIF clocks have been renamed as follows: DRIF0 to DRIF00 DRIF1 to DRIF01 DRIF2 to DRIF10 DRIF3 to DRIF11 DRIF4 to DRIF20 DRIF5 to DRIF21 DRIF6 to DRIF30 DRIF7 to DRIF31 Therefore, this patch renames the DRIF clocks from DRIFn to DRIFmm. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of Audio-DMACTakeshi Kihara
The clock sources of the AXI-bus clock (266.66 MHz) used for Audio-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N R-Car E3 --------------------------------------------------------------- Audio-DMAC0 S1D2 S1D2 S1D2 S1D2 Audio-DMAC1 S1D2 S1D2 S1D2 - As a result, change the parent clocks of the Audio-DMAC{0,1} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S1D2, and change the parent clock of the Audio-DMAC0 module on R-Car E3 to S1D2. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update R-Car D3, RZ/G2M, and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of SYS-DMACTakeshi Kihara
The clock sources of the AXI BUS clock (266.66 MHz) used for SYS-DMAC DMA transfers are: Channel R-Car H3 R-Car M3-W R-Car M3-N ------------------------------------------------- SYS-DMAC0 S0D3 S0D3 S0D3 SYS-DMAC1 S3D1 S3D1 S3D1 SYS-DMAC2 S3D1 S3D1 S3D1 As a result, change the parent clocks of the SYS-DMAC{1,2} module clocks on R-Car H3, R-Car M3-W, and R-Car M3-N to S3D1. NOTE: This information will be reflected in a future revision of the R-Car Gen3 Hardware Manual. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of HS-USBKazuya Mizuguchi
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the HS-USB module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [takeshi: Update R-Car H3, M3-N, and E3] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: rcar-gen3: Correct parent clock of EHCI/OHCIKazuya Mizuguchi
According to the R-Car Gen3 Hardware Manual Rev. 1.00, and the RZ/G2 Hardware Manual Rev. 0.61, the parent clock of the EHCI/OHCI module clocks on R-Car Gen3 and RZ/G2 SoCs is S3D2. Signed-off-by: Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com> [takeshi: Update R-Car H3, M3-N, and E3] Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [geert: Update RZ/G2M and RZ/G2E] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-04-02clk: renesas: r8a774c0: Add Z2 clockSimon Horman
Adds support for RZ/G2E (r8a774c0) Z2 clock. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Tested-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: r8a77990: Add Z2 clockTakeshi Kihara
Adds support for R-Car E3 (r8a77990) Z2 clock. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [simon: reworked changelog; rebased] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Support Z and Z2 clocks with high frequency parentsSimon Horman
Support Z and Z2 clocks with parent frequencies greater than UINT32_MAX Hz (~4.29GHz). The DIV_ROUND_CLOSEST_ULL() macro accepts a 64bit dividend and 32bit divisor. This leads to truncation of the divisor, which is the Z or Z2 parent clock frequency in HZ, on platforms where frequency of that clock is greater than UINT32_MAX Hz. To resolve this problem the DIV64_U64_ROUND_CLOSEST() macro, which takes on an unsigned 64bit dividend and divisor, is used. An earlier version of this patch made use of the existing DIV_ROUND_CLOSEST() macro, which accepts the prevailing type of the dividend and divisor. However, this does not compile on 32bit systems, such as i386 and mips, when called with the types used at this call site, an unsigned long long dividend and unsigned long divisor. This work is in preparation for supporting the Z2 clock on the R-Car Gen3 E3 (r8a77990) SoC which has a 4.8GHz parent clock. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Remove CLK_TYPE_GEN3_Z2Simon Horman
After recent reworking of Z and Z2 clk handling CLK_TYPE_GEN3_Z and CLK_TYPE_GEN3_Z2 have come to have precisely the same meaning. Remove this redundancy by eliminating the latter. This is not expected to have any run-time effect. As suggested by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Parameterise Z and Z2 clock offsetSimon Horman
Parameterise the offset of control bits within the FRQCRC register for Z and Z2 clocks. This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which uses a different offset for control bits to other, already, supported SoCs. As suggested by Geert Uytterhoeven. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: rcar-gen3: Parameterise Z and Z2 clock fixed divisorTakeshi Kihara
Parameterise Z and Z2 clock fixed divisor to allow clocks with a fixed divisor other than 2, the value used by all such clocks supported to date. This is in preparation for supporting the Z2 clock on the R-Car E3 (r8a77990) SoC which has a fixed divisor of 4. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [simon: squashed several patches; rewrote changelog; added r8a774a1 change] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: r9a06g032: Add missing PCI USB clockGareth Williams
The clock driver is missing support for the clk_pci_usb clock that is present on the SoC. This is added to allow the clock to be supported. Signed-off-by: Gareth Williams <gareth.williams.jx@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-04-02clk: renesas: r7s9210: Always use readl()Geert Uytterhoeven
On arm32, there is no reason to use the (soon deprecated) clk_readl(). Hence use the generic readl() instead. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-03-18clk: renesas: rcar-gen3: Pass name/offset to cpg_sd_clk_register()Geert Uytterhoeven
Explicitly pass the clock's name and register offset to cpg_sd_clk_register(), so the latter doesn't have to extract them from the cpg_core_clk object. This keeps all cpg_core_clk parsing and unmarshalling contained in a single function (rcar_gen3_cpg_clk_register()). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-25clk: renesas: r8a774a1: Fix LAST_DT_CORE_CLKFabrizio Castro
Enum LAST_DT_CORE_CLK needs updating as R8A774A1_CLK_CANFD was recently added and it's the core clock with the highest index. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Fixes: 9d034e151b40 ("clk: renesas: r8a774a1: Add missing CANFD clock") Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-21clk: renesas: r8a774c0: Fix LAST_DT_CORE_CLKFabrizio Castro
Enum LAST_DT_CORE_CLK needs updating as R8A774C0_CLK_CANFD was recently added and it's the core clock with the highest index. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Fixes: 2a6efbc6da5d248c ("clk: renesas: r8a774c0: Add missing CANFD clock") Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-02-05clk: renesas: r8a774c0: Add TMU clockBiju Das
This patch adds the TMU clocks to the R8A774C0 SoC. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-05clk: renesas: r8a77980: Add RPC clocksSergei Shtylyov
Describe the RPCSRC internal clock and the RPC[D2] clocks derived from it, as well as the RPC-IF module clock, in the R-Car V3H (R8A77980) CPG/MSSR driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-05clk: renesas: rcar-gen3: Add RPC clocksSergei Shtylyov
The RPCSRC internal clock is controlled by the RPCCKCR.DIV[4:3] on all the R-Car gen3 SoCs except V3M (R8A77970) but the encoding of this field is different between SoCs; it makes sense to support the most common case of this encoding in the R-Car gen3 CPG driver... After adding the RPCSRC clock, we can add the RPC[D2] clocks derived from it and controlled by the RPCCKCR register on all the R-Car gen3 SoCs except V3M (R8A77970); the composite clock driver seems handy for this task, using the spinlock added in the previous patch... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-25clk: renesas: rcar-gen3: Add spinlockSergei Shtylyov
Protect the CPG register read-modify-write sequence with a spinlock. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-25clk: renesas: rcar-gen3: Factor out cpg_reg_modify()Sergei Shtylyov
There's quite often repeated sequence of a CPG register read-modify-write, so it seems worth factoring it out into a function -- this saves 68 bytes of the object code (AArch64 gcc 4.8.5) and simplifies protecting all such sequences with a spinlock in the next patch... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-24clk: renesas: r8a774c0: Correct parent clock of DUGeert Uytterhoeven
According to the RZ/G Series, 2nd Generation Hardware Manual Rev 0.61, the parent clock of the DU module clocks on RZ/G2E is S1D1. Fixes: 906e0a4a6d1ef2d3 ("clk: renesas: cpg-mssr: Add r8a774c0 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-01-21clk: renesas: r8a774a1: Add missing CANFD clockFabrizio Castro
This patch adds the missing CANFD clock to the r8a774a1 specific clock driver. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-01-21clk: renesas: r8a774c0: Add missing CANFD clockFabrizio Castro
This patch adds the missing CANFD clock to the r8a774c0 specific clock driver. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-14Merge branch 'clk-of' into clk-nextStephen Boyd
* clk-of: clk: Use of_node_name_eq for node name comparisons
2018-12-14clk: Use of_node_name_eq for node name comparisonsRob Herring
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. For instances using of_node_cmp, this has the side effect of now using case sensitive comparisons. This should not matter for any FDT based system which all of these are. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Tero Kristo <t-kristo@ti.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: linux-renesas-soc@vger.kernel.org Cc: linux-clk@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> (clk-mstp) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (ux500) Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-14Merge branches 'clk-renesas', 'clk-allwinner', 'clk-tegra', 'clk-meson' and ↵Stephen Boyd
'clk-rockchip' into clk-next * clk-renesas: clk: renesas: rcar-gen3: Add HS400 quirk for SD clock clk: renesas: rcar-gen3: Add documentation for SD clocks clk: renesas: rcar-gen3: Set state when registering SD clocks clk: renesas: r8a77995: Simplify PLL3 multiplier/divider clk: renesas: r8a77995: Add missing CPEX clock clk: renesas: r8a77995: Remove non-existent SSP clocks clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocks clk: renesas: r8a77995: Correct parent clock of DU clk: renesas: r8a77990: Correct parent clock of DU clk: renesas: r8a77970: Add CPEX clock clk: renesas: r8a77965: Add CPEX clock clk: renesas: r8a7796: Add CPEX clock clk: renesas: r8a7795: Add CPEX clock clk: renesas: r8a774a1: Add CPEX clock dt-bindings: clock: r8a7796: Remove CSIREF clock dt-bindings: clock: r8a7795: Remove CSIREF clock clk: renesas: Mark rza2_cpg_clk_register static clk: renesas: r7s9210: Add USB clocks clk: renesas: r8a77970: Add RPC clocks clk: renesas: r7s9210: Add SDHI clocks * clk-allwinner: clk: sunxi-ng: a64: Allow parent change for VE clock clk: sunxi-ng: a33: Set CLK_SET_RATE_PARENT for all audio module clocks clk: sunxi-ng: a33: Use sigma-delta modulation for audio PLL clk: sunxi-ng: h3: Allow parent change for ve clock clk: sunxi-ng: add support for suniv F1C100s SoC dt-bindings: clock: Add Allwinner suniv F1C100s CCU clk: sunxi-ng: h3/h5: Fix CSI_MCLK parent clk: sunxi-ng: r40: Force LOSC parent to RTC LOSC output clk: sunxi-ng: sun50i: a64: Use sigma-delta modulation for audio PLL clk: sunxi-ng: a64: Fix gate bit of DSI DPHY clk: sunxi-ng: Enable DE2_CCU for SUN8I and SUN50I clk: sunxi-ng: Add support for H6 DE3 clocks dt-bindings: clock: sun8i-de2: Add H6 DE3 clock description clk: sunxi-ng: h6: Set video PLLs limits clk: sunxi-ng: Use u64 for calculation of NM rate clk: sunxi-ng: Adjust MP clock parent rate when allowed clk: sunxi-ng: sun50i: h6: Fix MMC clock mux width clk: sunxi-ng: enable so-said LDOs for A64 SoC's pll-mipi clock * clk-tegra: clk: tegra: Return the exact clock rate from clk_round_rate clk: tegra30: Use Tegra CPU powergate helper function soc/tegra: pmc: Drop SMP dependency from CPU APIs clk: tegra: Fix maximum audio sync clock for Tegra124/210 clk: tegra: get rid of duplicate defines clk: tegra20: Check whether direct PLLM sourcing is turned off for EMC clk: tegra20: Turn EMC clock gate into divider * clk-meson: (25 commits) clk: meson: axg-audio: use the clk input helper function clk: meson: add clk-input helper function clk: meson: Mark some things static clk: meson: meson8b: add the read-only video clock trees clk: meson: meson8b: add the fractional divider for vid_pll_dco clk: meson: meson8b: fix the offset of vid_pll_dco's N value clk: meson: Fix GXL HDMI PLL fractional bits width clk: meson: meson8b: add the CPU clock post divider clocks clk: meson: meson8b: rename cpu_div2/cpu_div3 to cpu_in_div2/cpu_in_div3 clk: meson: clk-regmap: add read-only gate ops clk: meson: meson8b: allow changing the CPU clock tree clk: meson: meson8b: run from the XTAL when changing the CPU frequency clk: meson: meson8b: add support for more M/N values in sys_pll clk: meson: meson8b: mark the CPU clock as CLK_IS_CRITICAL clk: meson: meson8b: do not use cpu_div3 for cpu_scale_out_sel clk: meson: clk-pll: check if the clock is already enabled clk: meson: meson8b: fix the width of the cpu_scale_div clock clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table clk: meson: meson8b: use the HHI syscon if available dt-bindings: clock: meson8b: use the registers from the HHI syscon ... * clk-rockchip: clk: rockchip: add clock-id to gate of ACODEC for rk3328 clk: rockchip: add clock ID of ACODEC for rk3328 clk: rockchip: fix ID of 8ch clock of I2S1 for rk3328 clk: rockchip: fix I2S1 clock gate register for rk3328 clk: rockchip: make rk3188 hclk_vio_bus critical clk: rockchip: fix rk3188 sclk_mac_lbtest parameter ordering clk: rockchip: fix rk3188 sclk_smc gate data clk: rockchip: fix typo in rk3188 spdif_frac parent
2018-12-10clk: renesas: Remove usage of CLK_IS_BASICStephen Boyd
This flag doesn't look to be used by any code, just set in various clk init structures and then never tested again. Remove it from these drivers as it doesn't provide any benefit. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: <linux-renesas-soc@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-12-07Merge tag 'clk-renesas-for-v4.21-tag2' of ↵Stephen Boyd
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-renesas Pull Renesas clk driver updates from Geert Uytterhoeven: - Add support for CPEX (timer) clocks on various R-Car Gen3 and RZ/G2 SoCs - Add support for SDHI HS400 clocks on early revisions of R-Car H3 and M3-W - Miscellaneous fixes based on the Hardware Manual Errata * tag 'clk-renesas-for-v4.21-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: rcar-gen3: Add HS400 quirk for SD clock clk: renesas: rcar-gen3: Add documentation for SD clocks clk: renesas: rcar-gen3: Set state when registering SD clocks clk: renesas: r8a77995: Simplify PLL3 multiplier/divider clk: renesas: r8a77995: Add missing CPEX clock clk: renesas: r8a77995: Remove non-existent SSP clocks clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocks clk: renesas: r8a77995: Correct parent clock of DU clk: renesas: r8a77990: Correct parent clock of DU clk: renesas: r8a77970: Add CPEX clock clk: renesas: r8a77965: Add CPEX clock clk: renesas: r8a7796: Add CPEX clock clk: renesas: r8a7795: Add CPEX clock clk: renesas: r8a774a1: Add CPEX clock dt-bindings: clock: r8a7796: Remove CSIREF clock dt-bindings: clock: r8a7795: Remove CSIREF clock
2018-12-07clk: renesas: rcar-gen3: Add HS400 quirk for SD clockNiklas Söderlund
On H3 (ES1.x, ES2.0) and M3-W (ES1.0, ES1.1) the clock setting for HS400 needs a quirk to function properly. The reason for the quirk is that there are two settings which produces same divider value for the SDn clock. On the effected boards the one currently selected results in HS400 not working. This change uses the same method as the Gen2 CPG driver and simply ignores the first clock setting as this is the offending one when selecting the settings. Which of the two possible settings is used have no effect for SDR104. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-07clk: renesas: rcar-gen3: Add documentation for SD clocksNiklas Söderlund
Document the known use cases of the different clock settings. This is useful as different SoC and ES versions use different settings to do the same thing as there is more than one combination to achieve the same SDn clock speed. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-07clk: renesas: rcar-gen3: Set state when registering SD clocksNiklas Söderlund
The driver tries to figure out which state a SD clock is in when the clock is registered, instead of setting a known state. This can be problematic for two reasons. 1. If the clock driver can't figure out the state of the clock, registration of the clock fails, and setting of a known state by a clock user is not possible. 2. The state of the clock depends on if and how the bootloader configured it. The driver only checks that the rate is known, not if the clock is stopped or not for example. Fix this by setting a known state and making sure the clock is stopped. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-04clk: renesas: r8a77995: Simplify PLL3 multiplier/dividerGeert Uytterhoeven
116/6 can be simplified to 58/3. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-12-04clk: renesas: r8a77995: Add missing CPEX clockGeert Uytterhoeven
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Feb 28, 2018) added the CPEX clock on R-Car D3. This clock can be selected as a clock source for CMT1 (Compare Match Timer Type 1). Add the missing clock to the DT bindings header, and implement support for it in the clock driver. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-12-04clk: renesas: r8a77995: Remove non-existent SSP clocksGeert Uytterhoeven
The R-Car Gen3 HardWare Manual Errata for Rev. 0.80 (Dec 22, 2017, and Feb 28, 2018) removed the SSPSRC, SSP1, and SSP2 clocks on R-Car D3, as this SoC does not have a Stream and Security Processor. As these definitions were never used, they can just be removed. The freed slots in the DT bindings header must not be reused, though. Fixes: 714c53aa2e2d6d60 ("clk: renesas: Add r8a77995 CPG Core Clock Definitions") Fixes: d71e851d82c6cfe5 ("clk: renesas: cpg-mssr: Add R8A77995 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-12-04clk: renesas: r8a77995: Remove non-existent VIN5-7 module clocksGeert Uytterhoeven
R-Car Gen3 Hardware Manual Errata for Rev 0.80 of February 28, 2018, removed the module clocks for the Video Input Module (VIN) channels 5-7 on R-Car D3, as they do not exist on this SoC. Fixes: d71e851d82c6cfe5 ("clk: renesas: cpg-mssr: Add R8A77995 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-12-04clk: renesas: r8a77995: Correct parent clock of DUGeert Uytterhoeven
According to the R-Car Gen3 Hardware Manual Rev 1.00, the parent clock of the DU module clocks on R-Car D3 is S1D1. Fixes: d71e851d82c6cfe5 ("clk: renesas: cpg-mssr: Add R8A77995 support") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-12-04clk: renesas: r8a77990: Correct parent clock of DUTakeshi Kihara
According to the R-Car Gen3 Hardware Manual Rev 1.00, the parent clock of the DU module clocks on R-Car E3 is S1D1. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Fixes: 3570a2af473789c5 ("clk: renesas: cpg-mssr: Add support for R-Car E3") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2018-12-04clk: renesas: r8a77970: Add CPEX clockGeert Uytterhoeven
Implement support for the CPEX clock on R-Car V3M. This clock can be selected as a clock source for CMT1 (Compare Match Timer Type 1). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-12-04clk: renesas: r8a77965: Add CPEX clockGeert Uytterhoeven
Implement support for the CPEX clock on R-Car M3-N. This clock can be selected as a clock source for CMT1 (Compare Match Timer Type 1). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-12-04clk: renesas: r8a7796: Add CPEX clockGeert Uytterhoeven
Implement support for the CPEX clock on R-Car M3-W. This clock can be selected as a clock source for CMT1 (Compare Match Timer Type 1). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-12-04clk: renesas: r8a7795: Add CPEX clockGeert Uytterhoeven
Implement support for the CPEX clock on R-Car H3. This clock can be selected as a clock source for CMT1 (Compare Match Timer Type 1). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-12-04clk: renesas: r8a774a1: Add CPEX clockGeert Uytterhoeven
Implement support for the CPEX clock on RZ/G2M. This clock can be selected as a clock source for CMT1 (Compare Match Timer Type 1). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Stephen Boyd <sboyd@kernel.org>
2018-11-29clk: renesas: Mark rza2_cpg_clk_register staticStephen Boyd
This is only used in this file, so mark it static to silence a sparse warning. Cc: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-14 09:47:39 +0000