summaryrefslogtreecommitdiffstats
path: root/drivers/char/tpm
AgeCommit message (Collapse)Author
2017-04-03tpm: validate TPM 2.0 commandsJarkko Sakkinen
Check for every TPM 2.0 command that the command code is supported and the command buffer has at least the length that can contain the header and the handle area. For ContextSave and FlushContext we mark the body to be part of the handle area. This gives validation for these commands at zero cost, including the body of the command. The more important reason for this is that we can virtualize these commands in the same way as you would virtualize the handle area of a command. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2017-04-03tpm: export tpm2_flush_context_cmdJarkko Sakkinen
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2017-04-03tpm: move length validation to tpm_transmit()Jarkko Sakkinen
Check that the length matches the length reported by the response header already in tpm_transmit() to improve validation. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2017-04-03tpm_crb: encapsulate crb_wait_for_reg_32Jarkko Sakkinen
Encapsulated crb_wait_for_reg32() so that state changes in other CRB registers than TPM_CRB_CTRL_REQ_x can be waited. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Gang Wei <gang.wei@intel.com>
2017-04-03tpm_crb: map locality registersJarkko Sakkinen
In order to provide access to locality registers, this commits adds mapping of the head of the CRB registers, which are located right before the control area. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Gang Wei <gang.wei@intel.com>
2017-04-03tpm_tis_spi: Add small delay after last transferPeter Huewe
Testing the implementation with a Raspberry Pi 2 showed that under some circumstances its SPI master erroneously releases the CS line before the transfer is complete, i.e. before the end of the last clock. In this case the TPM ignores the transfer and misses for example the GO command. The driver is unable to detect this communication problem and will wait for a command response that is never going to arrive, timing out eventually. As a workaround, the small delay ensures that the CS line is held long enough, even with a faulty SPI master. Other SPI masters are not affected, except for a negligible performance penalty. Cc: <stable@vger.kernel.org> Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm_tis_spi: Remove limitation of transfers to MAX_SPI_FRAMESIZE bytesPeter Huewe
Limiting transfers to MAX_SPI_FRAMESIZE was not expected by the upper layers, as tpm_tis has no such limitation. Add a loop to hide that limitation. v2: Moved scope of spi_message to the top as requested by Jarkko Cc: <stable@vger.kernel.org> Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm_tis_spi: Check correct byte for wait state indicatorPeter Huewe
Wait states are signaled in the last byte received from the TPM in response to the header, not the first byte. Check rx_buf[3] instead of rx_buf[0]. Cc: <stable@vger.kernel.org> Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm_tis_spi: Abort transfer when too many wait states are signaledPeter Huewe
Abort the transfer with ETIMEDOUT when the TPM signals more than TPM_RETRY wait states. Continuing with the transfer in this state will only lead to arbitrary failures in other parts of the code. Cc: <stable@vger.kernel.org> Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm_tis_spi: Use single function to transfer dataPeter Huewe
The algorithm for sending data to the TPM is mostly identical to the algorithm for receiving data from the TPM, so a single function is sufficient to handle both cases. This is a prequisite for all the other fixes, so we don't have to fix everything twice (send/receive) v2: u16 instead of u8 for the length. Cc: <stable@vger.kernel.org> Fixes: 0edbfea537d1 ("tpm/tpm_tis_spi: Add support for spi phy") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Benoit Houyere <benoit.houyere@st.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm/tpm_crb: enter the low power state upon device suspendWinkler, Tomas
This fix enables a platform to enter the idle state (suspend-to-idle) The driver needs to request explicitly go_idle upon completion from the pm suspend handler. The runtime pm is disabled on suspend during prepare state by calling pm_runtime_get_noresume, hence we cannot relay on runtime pm to leave the device in low power state. Symmetrically cmdReady is called upon resume. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Siged-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm: select CONFIG_CRYPTOArnd Bergmann
We get a newly introduced harmless warning when CONFIG_CRYPTO is disabled: warning: (TCG_TPM && TRUSTED_KEYS && IMA) selects CRYPTO_HASH_INFO which has unmet direct dependencies (CRYPTO) This adds another select to avoid the warning, consistent with other users of the crypto code. Fixes: c1f92b4b04ad ("tpm: enhance TPM 2.0 PCR extend to support multiple banks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Huewe <peterhuewe@gmx.de> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm: msleep() delays - replace with usleep_range() in i2c nuvoton driverNayna Jain
Commit 500462a9de65 "timers: Switch to a non-cascading wheel" replaced the 'classic' timer wheel, which aimed for near 'exact' expiry of the timers. Their analysis was that the vast majority of timeout timers are used as safeguards, not as real timers, and are cancelled or rearmed before expiration. The only exception noted to this were networking timers with a small expiry time. Not included in the analysis was the TPM polling timer, which resulted in a longer normal delay and, every so often, a very long delay. The non-cascading wheel delay is based on CONFIG_HZ. For a description of the different rings and their delays, refer to the comments in kernel/time/timer.c. Below are the delays given for rings 0 - 2, which explains the longer "normal" delays and the very, long delays as seen on systems with CONFIG_HZ 250. * HZ 1000 steps * Level Offset Granularity Range * 0 0 1 ms 0 ms - 63 ms * 1 64 8 ms 64 ms - 511 ms * 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s) * HZ 250 * Level Offset Granularity Range * 0 0 4 ms 0 ms - 255 ms * 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s) * 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s) Below is a comparison of extending the TPM with 1000 measurements, using msleep() vs. usleep_delay() when configured for 1000 hz vs. 250 hz, before and after commit 500462a9de65. linux-4.7 | msleep() usleep_range() 1000 hz: 0m44.628s | 1m34.497s 29.243s 250 hz: 1m28.510s | 4m49.269s 32.386s linux-4.7 | min-max (msleep) min-max (usleep_range) 1000 hz: 0:017 - 2:760s | 0:015 - 3:967s 0:014 - 0:418s 250 hz: 0:028 - 1:954s | 0:040 - 4:096s 0:016 - 0:816s This patch replaces the msleep() with usleep_range() calls in the i2c nuvoton driver with a consistent max range value. Signed-of-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org (linux-4.8) Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm crb: Work around BIOS's that report the wrong ACPI region sizeJason Gunthorpe
The expectation is that the if the CRB cmd/rsp buffer falls within the ACPI region that the entire buffer will be within the reason. Otherwise resource reservation will fail when it crosses regions. Work around this BIOS bug by limiting the cmd/rsp buffer to the length of the declared ACPI region. BIOS vendors should fix this by making the ACPI and register length declarations consistent. Reported-by: Davide Guerri <davide.guerri@gmail.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Davide Guerri <davide.guerri@gmail.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-04-03tpm_tis_core: Choose appropriate timeout for reading burstcountAlexander Steffen
TIS v1.3 for TPM 1.2 and PTP for TPM 2.0 disagree about which timeout value applies to reading a valid burstcount. It is TIMEOUT_D according to TIS, but TIMEOUT_A according to PTP, so choose the appropriate value depending on whether we deal with a TPM 1.2 or a TPM 2.0. This is important since according to the PTP TIMEOUT_D is much smaller than TIMEOUT_A. So the previous implementation could run into timeouts with a TPM 2.0, even though the TPM was behaving perfectly fine. During tpm2_probe TIMEOUT_D will be used even with a TPM 2.0, because TPM_CHIP_FLAG_TPM2 is not yet set. This is fine, since the timeout values will only be changed afterwards by tpm_get_timeouts. Until then TIS_TIMEOUT_D_MAX applies, which is large enough. Cc: stable@vger.kernel.org Fixes: aec04cbdf723 ("tpm: TPM 2.0 FIFO Interface") Signed-off-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Peter Huewe <peter.huewe@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-20tpm: declare tpm2_get_pcr_allocation() as staticJarkko Sakkinen
There's no need to export tpm2_get_pcr_alloation() because it is only a helper function for tpm2_auto_startup(). For the same reason it does not make much sense to maintain documentation for it. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-15tpm: Fix expected number of response bytes of TPM1.2 PCR ExtendStefan Berger
The TPM1.2 PCR Extend operation only returns 20 bytes in the body, which is the size of the PCR state. This fixes a problem where IMA gets errors with every PCR Extend. Fixes: c659af78eb7b ("tpm: Check size of response before accessing data") Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm xen: drop unneeded chip variableJulia Lawall
The call that used chip was dropped in 1f0f30e404b3. Drop the leftover declaration and initialization. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm: fix misspelled "facilitate" in module parameter descriptionDmitry Torokhov
I typoed "facilitate" as "faciltate" a few years back... Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-14tpm_tis: fix the error handling of init_tis()Wei Yongjun
Add the missing platform_driver_unregister() and remove the duplicate platform_device_unregister(force_pdev) in the error handling case. Fixes: 00194826e6be ("tpm_tis: Clean up the force=1 module parameter") Cc: stable@vger.kernel.org Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: silence an array overflow warningDan Carpenter
We should check that we're within bounds first before checking that "chip->active_banks[i] != TPM2_ALG_ERROR" so I've re-ordered the two checks. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: fix the type of owned field in cap_tStefan Berger
In cap_t the size of the type bool is assumed to be one byte. This commit sorts out the issue by changing the type to u8. Fixes: c659af78eb7b ("tpm: Check size of response before accessing data") Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: add securityfs support for TPM 2.0 firmware event logNayna Jain
Unlike the device driver support for TPM 1.2, the TPM 2.0 does not support the securityfs pseudo files for displaying the firmware event log. This patch enables support for providing the TPM 2.0 event log in binary form. TPM 2.0 event log supports a crypto agile format that records multiple digests, which is different from TPM 1.2. This patch enables the tpm_bios_log_setup for TPM 2.0 and adds the event log parser which understand the TPM 2.0 crypto agile format. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: enhance read_log_of() to support Physical TPM event logNayna Jain
Physical TPMs use Open Firmware Device Tree bindings that are similar to the IBM Power virtual TPM to support event log. However, these properties store the values in different endianness for Physical and Virtual TPM. This patch fixes the endianness issue by doing appropriate conversion based on Physical or Virtual TPM. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: enhance TPM 2.0 PCR extend to support multiple banksNayna Jain
The current TPM 2.0 device driver extends only the SHA1 PCR bank but the TCG Specification[1] recommends extending all active PCR banks, to prevent malicious users from setting unused PCR banks with fake measurements and quoting them. The existing in-kernel interface(tpm_pcr_extend()) expects only a SHA1 digest. To extend all active PCR banks with differing digest sizes, the SHA1 digest is padded with trailing 0's as needed. This patch reuses the defined digest sizes from the crypto subsystem, adding a dependency on CRYPTO_HASH_INFO module. [1] TPM 2.0 Specification referred here is "TCG PC Client Specific Platform Firmware Profile for TPM 2.0" Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: implement TPM 2.0 capability to get active PCR banksNayna Jain
This patch implements the TPM 2.0 capability TPM_CAP_PCRS to retrieve the active PCR banks from the TPM. This is needed to enable extending all active banks as recommended by TPM 2.0 TCG Specification. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Kenneth Goldman <kgold@linux.vnet.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: fix RC value check in tpm2_seal_trustedJarkko Sakkinen
The error code handling is broken as any error code that has the same bits set as TPM_RC_HASH passes. Implemented tpm2_rc_value() helper to parse the error value from FMT0 and FMT1 error codes so that these types of mistakes are prevented in the future. Fixes: 5ca4c20cfd37 ("keys, trusted: select hash algorithm for TPM2 chips") Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2017-02-03tpm_tis: fix iTPM probe via probe_itpm() functionMaciej S. Szmigiero
probe_itpm() function is supposed to send command without an itpm flag set and if this fails to repeat it, this time with the itpm flag set. However, commit 41a5e1cf1fe15 ("tpm/tpm_tis: Split tpm_tis driver into a core and TCG TIS compliant phy") moved the itpm flag from an "itpm" variable to a TPM_TIS_ITPM_POSSIBLE chip flag, so setting the (now function-local) itpm variable no longer had any effect. Finally, this function-local itpm variable was removed by commit 56af322156dbe9 ("tpm/tpm_tis: remove unused itpm variable") Tested only on non-iTPM TIS TPM. Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: Begin the process to deprecate user_read_timerJason Gunthorpe
For a long time the cdev read/write interface had this strange idea that userspace had to read the result within 60 seconds otherwise it is discarded. Perhaps this made sense under some older locking regime, but in the modern kernel it is not required and is just dangerous. Since something may be relying on this, double the timeout and print a warning. We can remove the code in a few years, but this should be enough to prevent new users. Suggested-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-02-03tpm: remove tpm_read_index and tpm_write_index from tpm.hJarkko Sakkinen
These are non-generic functions and do not belong to tpm.h. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
2017-01-23tpm: Check size of response before accessing dataStefan Berger
Make sure that we have not received less bytes than what is indicated in the header of the TPM response. Also, check the number of bytes in the response before accessing its data. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2017-01-23tpm_tis: use default timeout value if chip reports it as zeroMaciej S. Szmigiero
Since commit 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Atmel 3203 TPM on ThinkPad X61S (TPM firmware version 13.9) no longer works. The initialization proceeds fine until we get and start using chip-reported timeouts - and the chip reports C and D timeouts of zero. It turns out that until commit 8e54caf407b98e ("tpm: Provide a generic means to override the chip returned timeouts") we had actually let default timeout values remain in this case, so let's bring back this behavior to make chips like Atmel 3203 work again. Use a common code that was introduced by that commit so a warning is printed in this case and /sys/class/tpm/tpm*/timeouts correctly says the timeouts aren't chip-original. Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Cc: stable@vger.kernel.org Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm: Do not print an error message when doing TPM auto startupJason Gunthorpe
This is a regression when this code was reworked and made the error print unconditional. The original code deliberately suppressed printing of the first error message so it could quietly sense TPM_ERR_INVALID_POSTINIT. Fixes: a502feb67b47 ("tpm: Clean up reading of timeout and duration capabilities") Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm, tpm_crb: Handle 64-bit resource in crb_check_resource()Jiandi An
crb_check_resource() in TPM CRB driver calls acpi_dev_resource_memory() which only handles 32-bit resources. Adding a call to acpi_dev_resource_address_space() in TPM CRB driver which handles 64-bit resources. Signed-off-by: Jiandi An <anjiandi@codeaurora.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm/tpm_tis_spi: drop duplicate header module.hGeliang Tang
Drop duplicate header module.h from tpm_tis_spi.c. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm/st33zp24: Remove unneeded linux/miscdevice.h includeCorentin Labbe
tpm/st33zp24/st33zp24.c does not use any miscdevice so this patch remove this unnecessary inclusion. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm/vtpm: fix kdoc warningsWinkler, Tomas
Use corret kdoc format for function description and eliminate warning of type: tpm_ibmvtpm.c:66: warning: No description found for parameter 'count' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tmp: use pdev for parent device in tpm_chip_allocWinkler, Tomas
The tpm stack uses pdev name convention for the parent device. Fix that also in tpm_chip_alloc(). Fixes: 3897cd9c8d1d ("tpm: Split out the devm stuff from tpmm_chip_alloc")' Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm/tpm2-chip: fix kdoc errorsWinkler, Tomas
Use correct kdoc format, describe correct parameters and return values. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2017-01-23tpm: add kdoc for tpm_transmit and tpm_transmit_cmdWinkler, Tomas
Functions tpm_transmit and transmit_cmd are referenced from other functions kdoc hence deserve documentation. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-12-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds
Merge more updates from Andrew Morton: - a few misc things - kexec updates - DMA-mapping updates to better support networking DMA operations - IPC updates - various MM changes to improve DAX fault handling - lots of radix-tree changes, mainly to the test suite. All leading up to reimplementing the IDA/IDR code to be a wrapper layer over the radix-tree. However the final trigger-pulling patch is held off for 4.11. * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (114 commits) radix tree test suite: delete unused rcupdate.c radix tree test suite: add new tag check radix-tree: ensure counts are initialised radix tree test suite: cache recently freed objects radix tree test suite: add some more functionality idr: reduce the number of bits per level from 8 to 6 rxrpc: abstract away knowledge of IDR internals tpm: use idr_find(), not idr_find_slowpath() idr: add ida_is_empty radix tree test suite: check multiorder iteration radix-tree: fix replacement for multiorder entries radix-tree: add radix_tree_split_preload() radix-tree: add radix_tree_split radix-tree: add radix_tree_join radix-tree: delete radix_tree_range_tag_if_tagged() radix-tree: delete radix_tree_locate_item() radix-tree: improve multiorder iterators btrfs: fix race in btrfs_free_dummy_fs_info() radix-tree: improve dump output radix-tree: make radix_tree_find_next_bit more useful ...
2016-12-14tpm: use idr_find(), not idr_find_slowpath()Matthew Wilcox
idr_find_slowpath() is not intended to be part of the public API, it's an implementation detail. There's no reason to skip straight to the slowpath here. Link: http://lkml.kernel.org/r/1480369871-5271-64-git-send-email-mawilcox@linuxonhyperv.com Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Peter Huewe <peterhuewe@gmx.de> Cc: Marcel Selhorst <tpmdd@selhorst.net> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-14Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull security subsystem updates from James Morris: "Generally pretty quiet for this release. Highlights: Yama: - allow ptrace access for original parent after re-parenting TPM: - add documentation - many bugfixes & cleanups - define a generic open() method for ascii & bios measurements Integrity: - Harden against malformed xattrs SELinux: - bugfixes & cleanups Smack: - Remove unnecessary smack_known_invalid label - Do not apply star label in smack_setprocattr hook - parse mnt opts after privileges check (fixes unpriv DoS vuln)" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (56 commits) Yama: allow access for the current ptrace parent tpm: adjust return value of tpm_read_log tpm: vtpm_proxy: conditionally call tpm_chip_unregister tpm: Fix handling of missing event log tpm: Check the bios_dir entry for NULL before accessing it tpm: return -ENODEV if np is not set tpm: cleanup of printk error messages tpm: replace of_find_node_by_name() with dev of_node property tpm: redefine read_log() to handle ACPI/OF at runtime tpm: fix the missing .owner in tpm_bios_measurements_ops tpm: have event log use the tpm_chip tpm: drop tpm1_chip_register(/unregister) tpm: replace dynamically allocated bios_dir with a static array tpm: replace symbolic permission with octal for securityfs files char: tpm: fix kerneldoc tpm2_unseal_trusted name typo tpm_tis: Allow tpm_tis to be bound using DT tpm, tpm_vtpm_proxy: add kdoc comments for VTPM_PROXY_IOC_NEW_DEV tpm: Only call pm_runtime_get_sync if device has a parent tpm: define a generic open() method for ascii & bios measurements Documentation: tpm: add the Physical TPM device tree binding documentation ...
2016-11-28tpm: adjust return value of tpm_read_logJason Gunthorpe
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28tpm: vtpm_proxy: conditionally call tpm_chip_unregisterJason Gunthorpe
If tpm_chip_register fails vtpm must not call tpm_chip_unregister: > [ 58.271017] [<ffffffff8155bd32>] dpm_sysfs_remove+0x22/0x60 > [ 58.271017] [<ffffffff8154e438>] device_del+0x58/0x280 > [ 58.271017] [<ffffffffa024c020>] tpm_chip_unregister+0x40/0xb0 [tpm] > [ 58.271017] [<ffffffffa0292360>] vtpm_proxy_fops_release+0x40/0x60 [tpm_vtpm_proxy] [jarkko.sakkinen@linux.intel.com: cleaned up unneeded goto away] Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Tested-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28tpm: Fix handling of missing event logJason Gunthorpe
The event log is an optional firmware feature, if the firmware does not support it then the securityfs files should not be created and no other notification given. - Uniformly return -ENODEV from the tpm_bios_log_setup cone if no event log is detected. - Check in ACPI if this node was discovered via ACPI. - Improve the check in OF to make sure there is a parent and to fail detection if the two log properties are not declared - Pass through all other error codes instead of filtering just some Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28tpm: Check the bios_dir entry for NULL before accessing itStefan Berger
Check the bios_dir entry for NULL before accessing it. Currently this crashes the driver when a TPM 2 is attached and the entries are NULL. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28tpm: return -ENODEV if np is not setColin Ian King
device_node np contains a garbage value from the stack and it is only set if chip->dev.parent->of_node is not null. Thus the check for a null np won't spot a garbage value of np from the stack if chip->dev.parent->of_node is null and if np contains an garbage non-null value. I believe the correct fix is to return -ENODEV if and only if chip->dev.parent->of_node is null. Found with static analysis by CoverityScan, CID 1377755 Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28tpm: cleanup of printk error messagesNayna Jain
This patch removes the unnecessary error messages on failing to allocate memory and replaces pr_err/printk with dev_dbg/dev_info as applicable. Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2016-11-28tpm: replace of_find_node_by_name() with dev of_node propertyNayna Jain
Using the device of_node property is a better way to refer to the device tree node rather than of_find_node_by_name(). Suggested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-16 00:03:11 +0000