summaryrefslogtreecommitdiffstats
path: root/drivers/bus
AgeCommit message (Collapse)Author
2013-07-02Merge tag 'dt-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree changes from Arnd Bergmann: "These changes from 30 individual branches for the most part update device tree files, but there are also a few source code changes that have crept in this time, usually in order to atomically move over a driver from using hardcoded data to DT probing. A number of platforms change their DT files to use the C preprocessor, which is causing a bit of churn, but that is hopefully only this once" * tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (372 commits) ARM: at91: dt: rm9200ek: add spi support ARM: at91: dt: rm9200: add spi support ARM: at91/DT: at91sam9n12: add SPI DMA client infos ARM: at91/DT: sama5d3: add SPI DMA client infos ARM: at91/DT: fix SPI compatibility string ARM: Kirkwood: Fix the internal register ranges translation ARM: dts: bcm281xx: change comment to C89 style ARM: mmc: bcm281xx SDHCI driver (dt mods) ARM: nomadik: add the new clocks to the device tree clk: nomadik: implement the Nomadik clocks properly ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support arm: mvebu: enable mini-PCIe connectors on Armada 370 RD ARM: shmobile: irqpin: add a DT property to enable masking on parent ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ...
2013-07-02Merge tag 'soc-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC specific changes from Arnd Bergmann: "These changes are all to SoC-specific code, a total of 33 branches on 17 platforms were pulled into this. Like last time, Renesas sh-mobile is now the platform with the most changes, followed by OMAP and EXYNOS. Two new platforms, TI Keystone and Rockchips RK3xxx are added in this branch, both containing almost no platform specific code at all, since they are using generic subsystem interfaces for clocks, pinctrl, interrupts etc. The device drivers are getting merged through the respective subsystem maintainer trees. One more SoC (u300) is now multiplatform capable and several others (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving towards that goal with this series but need more work. Also noteworthy is the work on PCI here, which is traditionally part of the SoC specific code. With the changes done by Thomas Petazzoni, we can now more easily have PCI host controller drivers as loadable modules and keep them separate from the platform code in drivers/pci/host. This has already led to the discovery that three platforms (exynos, spear and imx) are actually using an identical PCIe host controller and will be able to share a driver once support for spear and imx is added." * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits) ARM: integrator: let pciv3 use mem/premem from device tree ARM: integrator: set local side PCI addresses right ARM: dts: Add pcie controller node for exynos5440-ssdk5440 ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC ARM: EXYNOS: Enable PCIe support for Exynos5440 pci: Add PCIe driver for Samsung Exynos ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data ARM: keystone: Move CPU bringup code to dedicated asm file ARM: multiplatform: always pick one CPU type ARM: imx: select syscon for IMX6SL ARM: keystone: select ARM_ERRATA_798181 only for SMP ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1 ARM: OMAP2+: AM43x: resolve SMP related build error dmaengine: edma: enable build for AM33XX ARM: edma: Add EDMA crossbar event mux support ARM: edma: Add DT and runtime PM support to the private EDMA API dmaengine: edma: Add TI EDMA device tree binding arm: add basic support for Rockchip RK3066a boards arm: add debug uarts for rockchip rk29xx and rk3xxx series arm: Add basic clocks for Rockchip rk3066a SoCs ...
2013-06-17drivers: bus: add a new driver for WEIMHuang Shijie
The WEIM(Wireless External Interface Module) works like a bus. You can attach many different devices on it, such as NOR, onenand. In the case of i.MX6q-sabreauto, the NOR is connected to WEIM. This patch also adds the devicetree binding document. The driver only works when the devicetree is enabled. Signed-off-by: Huang Shijie <b32955@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-06-14Merge tag 'cleanup-3.11-4' of git://git.infradead.org/users/jcooper/linux ↵Olof Johansson
into next/cleanup From Jason Cooper, mvebu cleanup for v3.11 (round 4): - use pr_fmt in mvebu-mbus driver * tag 'cleanup-3.11-4' of git://git.infradead.org/users/jcooper/linux: bus: mvebu-mbus: Use pr_fmt Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-08bus: mvebu-mbus: Use pr_fmtEzequiel Garcia
In order to clean message printing, we replace pr_info with pr_fmt. This is purely cosmetic change, with the sole purpose of making the code a bit more readable. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-06-03drivers/bus: arm-cci: fix combined ARMv6+v7 buildArnd Bergmann
When we build a kernel with support for both ARMv6 and ARMv7, gas is trying to be helpful by pointing out that the arm-cci driver would not work on ARMv6: /tmp/ccu1LDeU.s: Assembler messages: /tmp/ccu1LDeU.s:450: Error: selected processor does not support ARM mode `wfi ' /tmp/ccu1LDeU.s:451: Error: selected processor does not support ARM mode `wfe ' make[4]: *** [drivers/bus/arm-cci.o] Error 1 We know that the driver will only be used on ARMv7, hence we can annotate the inline assembly listing to allow those instructions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Dave Martin <dave.martin@linaro.org>
2013-05-30ARM: OMAP2+: Remove omap4 ocp2scp pdataTony Lindgren
This is omap4+ only and no longer needed as omap4+ can be booted using device tree. Also remove the related pdata handling from the driver and the now unneeded platform_data/omap_ocp2scp.h. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Olof Johansson <olof@lixom.net> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-29drivers/bus: arm-cci: function to enable CCI ports from early boot codeNicolas Pitre
This provides cci_enable_port_for_self(). This is the counterpart to cci_disable_port_by_cpu(self). This is meant to be called from the MCPM machine specific power_up_setup callback code when the appropriate affinity level needs to be initialized. The code therefore has to be position independent as the MMU is still off and it cannot rely on any stack space. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Dave Martin <dave.martin@linaro.org>
2013-05-29drivers: bus: add ARM CCI supportLorenzo Pieralisi
On ARM multi-cluster systems coherency between cores running on different clusters is managed by the cache-coherent interconnect (CCI). It allows broadcasting of TLB invalidates and memory barriers and it guarantees cache coherency at system level through snooping of slave interfaces connected to it. This patch enables the basic infrastructure required in Linux to handle and programme the CCI component. Non-local variables used by the CCI management functions called by power down function calls after disabling the cache must be flushed out to main memory in advance, otherwise incoherency of those values may occur if they are sitting in the cache of some other CPU when power down functions execute. Driver code ensures that relevant data structures are flushed from inner and outer caches after the driver probe is completed. CCI slave port resources are linked to set of CPUs through bus masters phandle properties that link the interface resources to masters node in the device tree. Documentation describing the CCI DT bindings is provided with the patch. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
2013-04-11bus: mvebu: fix mistake in PCIe window target attribute for KirkwoodThomas Petazzoni
The target and attributes for the PCIe address decoding windows were not correct on Kirkwood for the second PCIe interface. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-30bus: mvebu-mbus: Restore checking for coherency fabric hardwareNeil Greatorex
The new mvebu-mbus driver was not checking the device tree for coherency fabric hardware and hence was not setting the hw_io_coherency flag in mbus_state. This prevented the mvsdio driver from operating correctly. This patch restores the check. Signed-off-by: Neil Greatorex <neil@fatboyfat.co.uk> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-28bus: introduce an Marvell EBU MBus driverThomas Petazzoni
The Marvell EBU SoCs have a configurable physical address space layout: the physical ranges of memory used to address PCI(e) interfaces, NOR flashes, SRAM and various other types of memory are configurable by software, through a mechanism of so-called 'address decoding windows'. This new driver mvebu-mbus consolidates the existing code to address the configuration of these memory ranges, which is spread into mach-mvebu, mach-orion5x, mach-mv78xx0, mach-dove and mach-kirkwood. Following patches convert each Marvell EBU SoC family to use this driver, therefore removing the old code that was configuring the address decoding windows. It is worth mentioning that the MVEBU_MBUS Kconfig option is intentionally added as a blind option. The new driver implements and exports the mv_mbus_dram_info() function, which is used by various Marvell drivers throughout the tree to get access to window configuration parameters that they require. This function is also implemented in arch/arm/plat-orion/addr-map.c, which ultimately gets removed at the end of this patch series. So, in order to preserve bisectability, we want to ensure that *either* this new driver, *or* the legacy code in plat-orion/addr-map.c gets compiled in. By making MVEBU_MBUS a blind option, we are sure that only a platform that does 'select MVEBU_MBUS' will get this new driver compiled in. Therefore, throughout the next patches that convert the Marvell sub-architectures one after the other to this new driver, we add the 'select MVEBU_MBUS' and also ensure to remove plat-orion/addr-map.c from the build for this specific sub-architecture. This ensures that bisectability is preserved. Ealier versions of this driver had a DT binding, but since those were not yet agreed upon, they were removed. The driver still uses of_device_id to find the SoC specific details according to the string passed to mvebu_mbus_init(). The plan is to re-introduce a proper DT binding as a followup set of patches. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-01-03Drivers: misc: remove __dev* attributes.Greg Kroah-Hartman
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-16ARM: OMAP: Fix drivers to depend on omap for internal devicesTony Lindgren
These devices are not available on other architectures, so let's limit them to omap. If the driver subsystem maintainers want to build test system wide changes without building for each target, it's easy to carry a test patch that just strips out the depends entries from Kconfig files. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-11-07drivers: bus: ocp2scp: add pdata supportKishon Vijay Abraham I
ocp2scp was not having pdata support which makes *musb* fail for non-dt boot in OMAP platform. The pdata will have information about the devices that is connected to ocp2scp. ocp2scp driver will now make use of this information to create the devices that is attached to ocp2scp. This is needed to fix MUSB regression caused by commit c9e4412a (arm: omap: phy: remove unused functions from omap-phy-internal.c) Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: updated comments for regression info] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-10-01drivers: bus: omap_l3: fixup merge conflict resolutionOlof Johansson
This fixes a local merge conflict resolution done wrong locally in arm-soc for-next. soc.h was added on a cleanup branch, but the driver was moved and the header no longer needed. Signed-off-by: Olof Johansson <olof@lixom.net> [ .. and I did the same wrong merge, since git automatically does the whole rename detection etc, so applying this patch from Olof - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-01Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
2012-09-20drivers: bus: omap_l3: use resources instead of hardcoded irqsOlof Johansson
This fixes up a merge conflict due to the move of the driver and cleanups of platform data around the same time. Moving to the resource is what we want anyway, so do it in this branch. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [olof: rewrote with this branch as base, same end result] Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
2012-09-19drivers: bus: Move the OMAP interconnect driver to drivers/bus/Santosh Shilimkar
OMAP interconnect drivers are used for the interconnect error handling. Since they are bus driver, lets move it to newly created drivers/bus. Tested-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-04drivers: bus: omap-ocp2scp: Fix compile errorKishon Vijay Abraham I
Fixes: CC [M] drivers/bus/omap-ocp2scp.o drivers/bus/omap-ocp2scp.c:70:1: error: '__mod_of_device_table' aliased to undefined symbol 'omap_usb2_id_table' Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-22drivers: bus: add a new driver for omap-ocp2scpKishon Vijay Abraham I
Adds a new driver *omap-ocp2scp*. This driver takes the responsibility of creating all the devices that is connected to OCP2SCP. In the case of OMAP4, USB2PHY is connected to ocp2scp. This also includes device tree support for ocp2scp driver and the documentation with device tree binding information is updated. Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>