summaryrefslogtreecommitdiffstats
path: root/drivers/block
AgeCommit message (Collapse)Author
2013-02-28Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "A few groups of patches here. Alex has been hard at work improving the RBD code, layout groundwork for understanding the new formats and doing layering. Most of the infrastructure is now in place for the final bits that will come with the next window. There are a few changes to the data layout. Jim Schutt's patch fixes some non-ideal CRUSH behavior, and a set of patches from me updates the client to speak a newer version of the protocol and implement an improved hashing strategy across storage nodes (when the server side supports it too). A pair of patches from Sam Lang fix the atomicity of open+create operations. Several patches from Yan, Zheng fix various mds/client issues that turned up during multi-mds torture tests. A final set of patches expose file layouts via virtual xattrs, and allow the policies to be set on directories via xattrs as well (avoiding the awkward ioctl interface and providing a consistent interface for both kernel mount and ceph-fuse users)." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (143 commits) libceph: add support for HASHPSPOOL pool flag libceph: update osd request/reply encoding libceph: calculate placement based on the internal data types ceph: update support for PGID64, PGPOOL3, OSDENC protocol features ceph: update "ceph_features.h" libceph: decode into cpu-native ceph_pg type libceph: rename ceph_pg -> ceph_pg_v1 rbd: pass length, not op for osd completions rbd: move rbd_osd_trivial_callback() libceph: use a do..while loop in con_work() libceph: use a flag to indicate a fault has occurred libceph: separate non-locked fault handling libceph: encapsulate connection backoff libceph: eliminate sparse warnings ceph: eliminate sparse warnings in fs code rbd: eliminate sparse warnings libceph: define connection flag helpers rbd: normalize dout() calls rbd: barriers are hard rbd: ignore zero-length requests ...
2013-02-28Merge branch 'for-3.9/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver bits from Jens Axboe: "After the block IO core bits are in, please grab the driver updates from below as well. It contains: - Fix ancient regression in dac960. Nobody must be using that anymore... - Some good fixes from Guo Ghao for loop, fixing both potential oopses and deadlocks. - Improve mtip32xx for NUMA systems, by being a bit more clever in distributing work. - Add IBM RamSan 70/80 driver. A second round of fixes for that is pending, that will come in through for-linus during the 3.9 cycle as per usual. - A few xen-blk{back,front} fixes from Konrad and Roger. - Other minor fixes and improvements." * 'for-3.9/drivers' of git://git.kernel.dk/linux-block: loopdev: ignore negative offset when calculate loop device size loopdev: remove an user triggerable oops loopdev: move common code into loop_figure_size() loopdev: update block device size in loop_set_status() loopdev: fix a deadlock xen-blkback: use balloon pages for persistent grants xen-blkfront: drop the use of llist_for_each_entry_safe xen/blkback: Don't trust the handle from the frontend. xen-blkback: do not leak mode property block: IBM RamSan 70/80 driver fixes rsxx: add slab.h include to dma.c drivers/block/mtip32xx: add missing GENERIC_HARDIRQS dependency block: remove new __devinit/exit annotations on ramsam driver block: IBM RamSan 70/80 device driver drivers/block/mtip32xx/mtip32xx.c:1726:5: sparse: symbol 'mtip_send_trim' was not declared. Should it be static? drivers/block/mtip32xx/mtip32xx.c:4029:1: sparse: symbol 'mtip_workq_sdbf0' was not declared. Should it be static? dac960: return success instead of -ENOTTY mtip32xx: add trim support mtip32xx: Add workqueue and NUMA support block: delete super ancient PC-XT driver for 1980's hardware
2013-02-28Merge branch 'for-3.9/core' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block IO core bits from Jens Axboe: "Below are the core block IO bits for 3.9. It was delayed a few days since my workstation kept crashing every 2-8h after pulling it into current -git, but turns out it is a bug in the new pstate code (divide by zero, will report separately). In any case, it contains: - The big cfq/blkcg update from Tejun and and Vivek. - Additional block and writeback tracepoints from Tejun. - Improvement of the should sort (based on queues) logic in the plug flushing. - _io() variants of the wait_for_completion() interface, using io_schedule() instead of schedule() to contribute to io wait properly. - Various little fixes. You'll get two trivial merge conflicts, which should be easy enough to fix up" Fix up the trivial conflicts due to hlist traversal cleanups (commit b67bfe0d42ca: "hlist: drop the node parameter from iterators"). * 'for-3.9/core' of git://git.kernel.dk/linux-block: (39 commits) block: remove redundant check to bd_openers() block: use i_size_write() in bd_set_size() cfq: fix lock imbalance with failed allocations drivers/block/swim3.c: fix null pointer dereference block: don't select PERCPU_RWSEM block: account iowait time when waiting for completion of IO request sched: add wait_for_completion_io[_timeout] writeback: add more tracepoints block: add block_{touch|dirty}_buffer tracepoint buffer: make touch_buffer() an exported function block: add @req to bio_{front|back}_merge tracepoints block: add missing block_bio_complete() tracepoint block: Remove should_sort judgement when flush blk_plug block,elevator: use new hashtable implementation cfq-iosched: add hierarchical cfq_group statistics cfq-iosched: collect stats from dead cfqgs cfq-iosched: separate out cfqg_stats_reset() from cfq_pd_reset_stats() blkcg: make blkcg_print_blkgs() grab q locks instead of blkcg lock block: RCU free request_queue blkcg: implement blkg_[rw]stat_recursive_sum() and blkg_[rw]stat_merge() ...
2013-02-27nbd: fix sparse warningAlex Elder
I just fixed this in "drivers/block/rbd.c" and I noticed that "drivers/block/nbd.c" has the same problem. Fix a warning issued by sparse by adding some lockdep annotations to indicate the queue lock gets dropped (because it's held when do_nbd_request() is called) and re-acquired within the function. Signed-off-by: Alex Elder <elder@inktank.com> Cc: Paul Clements <paul.clements@steeleye.com> Cc: Paul Clements <paul.clements@us.sios.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27nbd: show read-only state in sysfsPaolo Bonzini
Pass the read-only flag to set_device_ro, so that it will be visible to the block layer and in sysfs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: Alex Bligh <alex@alex.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27nbd: fsync and kill block device on shutdownPaolo Bonzini
There are two problems with shutdown in the NBD driver. 1: Receiving the NBD_DISCONNECT ioctl does not sync the filesystem. This patch adds the sync operation into __nbd_ioctl()'s NBD_DISCONNECT handler. This is useful because BLKFLSBUF is restricted to processes that have CAP_SYS_ADMIN, and the NBD client may not possess it (fsync of the block device does not sync the filesystem, either). 2: Once we clear the socket we have no guarantee that later reads will come from the same backing storage. The patch adds calls to kill_bdev() in __nbd_ioctl()'s socket clearing code so the page cache is cleaned, lest reads that hit on the page cache will return stale data from the previously-accessible disk. Example: # qemu-nbd -r -c/dev/nbd0 /dev/sr0 # file -s /dev/nbd0 /dev/stdin: # UDF filesystem data (version 1.5) etc. # qemu-nbd -d /dev/nbd0 # qemu-nbd -r -c/dev/nbd0 /dev/sda # file -s /dev/nbd0 /dev/stdin: # UDF filesystem data (version 1.5) etc. While /dev/sda has: # file -s /dev/sda /dev/sda: x86 boot sector; etc. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Paul Clements <Paul.Clements@steeleye.com> Cc: Alex Bligh <alex@alex.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27nbd: support FLUSH requestsAlex Bligh
Currently, the NBD device does not accept flush requests from the Linux block layer. If the NBD server opened the target with neither O_SYNC nor O_DSYNC, however, the device will be effectively backed by a writeback cache. Without issuing flushes properly, operation of the NBD device will not be safe against power losses. The NBD protocol has support for both a cache flush command and a FUA command flag; the server will also pass a flag to note its support for these features. This patch adds support for the cache flush command and flag. In the kernel, we receive the flags via the NBD_SET_FLAGS ioctl, and map NBD_FLAG_SEND_FLUSH to the argument of blk_queue_flush. When the flag is active the block layer will send REQ_FLUSH requests, which we translate to NBD_CMD_FLUSH commands. FUA support is not included in this patch because all free software servers implement it with a full fdatasync; thus it has no advantage over supporting flush only. Because I [Paolo] cannot really benchmark it in a realistic scenario, I cannot tell if it is a good idea or not. It is also not clear if it is valid for an NBD server to support FUA but not flush. The Linux block layer gives a warning for this combination, the NBD protocol documentation says nothing about it. The patch also fixes a small problem in the handling of flags: nbd->flags must be cleared at the end of NBD_DO_IT, but the driver was not doing that. The bug manifests itself as follows. Suppose you two different client/server pairs to start the NBD device. Suppose also that the first client supports NBD_SET_FLAGS, and the first server sends NBD_FLAG_SEND_FLUSH; the second pair instead does neither of these two things. Before this patch, the second invocation of NBD_DO_IT will use a stale value of nbd->flags, and the second server will issue an error every time it receives an NBD_CMD_FLUSH command. This bug is pre-existing, but it becomes much more important after this patch; flush failures make the device pretty much unusable, unlike Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bligh <alex@alex.org.uk> Acked-by: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27drbd: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27block/loop: convert to idr_alloc()Tejun Heo
Convert to the much saner new idr interface. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27block/loop: don't use idr_remove_all()Tejun Heo
idr_destroy() can destroy idr by itself and idr_remove_all() is being deprecated. Drop its usage. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs pile (part one) from Al Viro: "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent locking violations, etc. The most visible changes here are death of FS_REVAL_DOT (replaced with "has ->d_weak_revalidate()") and a new helper getting from struct file to inode. Some bits of preparation to xattr method interface changes. Misc patches by various people sent this cycle *and* ocfs2 fixes from several cycles ago that should've been upstream right then. PS: the next vfs pile will be xattr stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) saner proc_get_inode() calling conventions proc: avoid extra pde_put() in proc_fill_super() fs: change return values from -EACCES to -EPERM fs/exec.c: make bprm_mm_init() static ocfs2/dlm: use GFP_ATOMIC inside a spin_lock ocfs2: fix possible use-after-free with AIO ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero target: writev() on single-element vector is pointless export kernel_write(), convert open-coded instances fs: encode_fh: return FILEID_INVALID if invalid fid_type kill f_vfsmnt vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op nfsd: handle vfs_getattr errors in acl protocol switch vfs_getattr() to struct path default SET_PERSONALITY() in linux/elf.h ceph: prepopulate inodes only when request is aborted d_hash_and_lookup(): export, switch open-coded instances 9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate() 9p: split dropping the acls from v9fs_set_create_acl() ...
2013-02-26libceph: update osd request/reply encodingSage Weil
Use the new version of the encoding for osd requests and replies. In the process, update the way we are tracking request ops and reply lengths and results in the struct ceph_osd_request. Update the rbd and fs/ceph users appropriately. The main changes are: - we keep pointers into the request memory for fields we need to update each time the request is sent out over the wire - we keep information about the result in an array in the request struct where the users can easily get at it. Signed-off-by: Sage Weil <sage@inktank.com> Reviewed-by: Alex Elder <elder@inktank.com>
2013-02-26rbd: pass length, not op for osd completionsAlex Elder
The only thing type-specific osd completion functions do with their osd op parameter is (in some cases) extract the number of bytes transferred from it. In the other cases, the xferred bytes field is not used, and total message data transfer byte count (which may well be zero) is used. Just set the object request transfer count in the main osd request callback function and provide that to the other routines. There is then no longer any need to pass the op pointer to the type-specific completion routines, so drop those parameters. Stop doing anything with the total message data length. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-02-26rbd: move rbd_osd_trivial_callback()Alex Elder
This function is slightly out of place, probably the result of an errant automatic merge or something. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Sage Weil <sage@inktank.com>
2013-02-26switch vfs_getattr() to struct pathAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-25rbd: eliminate sparse warningsAlex Elder
Fengguang Wu reminded me that there were outstanding sparse reports in the ceph and rbd code. This patch fixes these problems in rbd that lead to those reports: - Convert functions that are never referenced externally to have static scope. - Add a lockdep annotation to rbd_request_fn(), because it releases a lock before acquiring it again. This partially resolves: http://tracker.ceph.com/issues/4184 Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25rbd: normalize dout() callsAlex Elder
Add dout() calls to facilitate tracing of image and object requests. Change a few existing calls so they use __func__ rather than the hard-coded function name. Have calls always add ":" after the name of the function, and prefix pointer values with a consistent tag indicating what it represents. (Note that there remain some older dout() calls that are left untouched by this patch.) Issue a warning if rbd_osd_write_callback() ever gets a short write. This resolves: http://tracker.ceph.com/issues/4235 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25rbd: barriers are hardAlex Elder
Let's go shopping! I'm afraid this may not have gotten it right: 07741308 rbd: add barriers near done flag operations The smp_wmb() should have been done *before* setting the done flag, to ensure all other data was valid before marking the object request done. Switch to use atomic_inc_return() here to set the done flag, which allows us to verify we don't mark something done more than once. Doing this also implies general barriers before and after the call. And although a read memory barrier might have been sufficient before reading the done flag, convert this to a full memory barrier just to put this issue to bed. This resolves: http://tracker.ceph.com/issues/4238 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-25rbd: ignore zero-length requestsAlex Elder
The old request code simply ignored zero-length requests. We should still operate that same way to avoid any changes in behavior. We can implement handling for special zero-length requests separately (see http://tracker.ceph.com/issues/4236). Add some assertions based on this new constraint. This resolves: http://tracker.ceph.com/issues/4237 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-22new helper: file_inode(file)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-22loopdev: ignore negative offset when calculate loop device sizeGuo Chao
Negative offset may cause loop device size larger than backing file size. $ fallocate -l 1M a $ losetup --offset 0xffffffffffff0000 /dev/loop0 a $ blockdev --getsize64 /dev/loop0 1114112 $ ls -l a -rw-r--r-- 1 root root 1048576 Jan 23 12:46 a $ cat /dev/loop0 cat: /dev/loop0: Input/output error It makes no sense to do that. Only apply offset when it's positive. Fix a typo in the comment by the way. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22loopdev: remove an user triggerable oopsGuo Chao
When loopdev is built as module and we pass an invalid parameter, loop_init() will return directly without deregister misc device, which will cause an oops when insert loop module next time because we left some garbage in the misc device list. Test case: sudo modprobe loop max_part=1024 (failed due to invalid parameter) sudo modprobe loop (oops) Clean up nicely to avoid such oops. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22loopdev: move common code into loop_figure_size()Guo Chao
Update block device size in accord with gendisk size and let userspace know the change in loop_figure_size(). This is a clean up to remove common code of loop_figure_size()'s two callers. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22loopdev: update block device size in loop_set_status()Guo Chao
Loop device driver sometimes fails to impose the size limit on the device. Keep issuing following two commands: losetup --offset 7517244416 --sizelimit 3224971264 /dev/loop0 backed_file blockdev --getsize64 /dev/loop0 blockdev reports file size instead of sizelimit several out of 100 times. The problems are: - losetup set up the device in two ioctl: LOOP_SET_FD and LOOP_SET_STATUS64. - LOOP_SET_STATUS64 only update size of gendisk. Block device size will be updated lazily when device comes to use. If udev rushes in between the two ioctl, it will bring in a block device whose size is backing file size. If the device is not released after LOOP_SET_STATUS64 ioctl, blockdev will not see the updated size. Update block size in LOOP_SET_STATUS64 ioctl. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Reported-by: M. Hindess <hindessm@uk.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22loopdev: fix a deadlockGuo Chao
bd_mutex and lo_ctl_mutex can be held in different order. Path #1: blkdev_open blkdev_get __blkdev_get (hold bd_mutex) lo_open (hold lo_ctl_mutex) Path #2: blkdev_ioctl lo_ioctl (hold lo_ctl_mutex) lo_set_capacity (hold bd_mutex) Lockdep does not report it, because path #2 actually holds a subclass of lo_ctl_mutex. This subclass seems creep into the code by mistake. The patch author actually just mentioned it in the changelog, see commit f028f3b2 ("loop: fix circular locking in loop_clr_fd()"), also see: http://marc.info/?l=linux-kernel&m=123806169129727&w=2 Path #2 hold bd_mutex to call bd_set_size(), I've protected it with i_mutex in a previous patch, so drop bd_mutex at this site. Signed-off-by: Guo Chao <yan@linux.vnet.ibm.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: M. Hindess <hindessm@uk.ibm.com> Cc: Nikanth Karthikesan <knikanth@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-22drivers/block/swim3.c: fix null pointer dereferenceCong Ding
The use of pointer fs should be after the null check. Signed-off-by: Cong Ding <dinggnu@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-21Merge tag 'driver-core-3.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core patches from Greg Kroah-Hartman: "Here is the big driver core merge for 3.9-rc1 There are two major series here, both of which touch lots of drivers all over the kernel, and will cause you some merge conflicts: - add a new function called devm_ioremap_resource() to properly be able to check return values. - remove CONFIG_EXPERIMENTAL Other than those patches, there's not much here, some minor fixes and updates" Fix up trivial conflicts * tag 'driver-core-3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (221 commits) base: memory: fix soft/hard_offline_page permissions drivercore: Fix ordering between deferred_probe and exiting initcalls backlight: fix class_find_device() arguments TTY: mark tty_get_device call with the proper const values driver-core: constify data for class_find_device() firmware: Ignore abort check when no user-helper is used firmware: Reduce ifdef CONFIG_FW_LOADER_USER_HELPER firmware: Make user-mode helper optional firmware: Refactoring for splitting user-mode helper code Driver core: treat unregistered bus_types as having no devices watchdog: Convert to devm_ioremap_resource() thermal: Convert to devm_ioremap_resource() spi: Convert to devm_ioremap_resource() power: Convert to devm_ioremap_resource() mtd: Convert to devm_ioremap_resource() mmc: Convert to devm_ioremap_resource() mfd: Convert to devm_ioremap_resource() media: Convert to devm_ioremap_resource() iommu: Convert to devm_ioremap_resource() drm: Convert to devm_ioremap_resource() ...
2013-02-20Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k update from Geert Uytterhoeven. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Sort out !CONFIG_MMU_SUN3 vs. CONFIG_HAS_DMA swim: Add missing spinlock init
2013-02-20Merge branch 'stable/for-jens-3.9' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen into for-3.9/drivers Konrad writes: Please git pull the following branch: git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen.git stable/for-jens-3.9 which has bug-fixes that did not make it in v3.8. They all are marked as material for the stable tree as well. There are two bug-fixes for the code that has been in there for some time (that is the Jan's fix and one of mine). And there are two bug-fixes for the persistent grant feature that debuted in v3.8 for xen blk[back|front]end.
2013-02-19Merge branch 'testing' of github.com:ceph/ceph-client into into linux-3.8-cephAlex Elder
2013-02-19libceph: drop return value from page vector copy routinesAlex Elder
The return values provided for ceph_copy_to_page_vector() and ceph_copy_from_page_vector() serve no purpose, so get rid of them. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-19rbd: ignore result of ceph_copy_from_page_vector()Alex Elder
The result of ceph_copy_from_page_vector() is simply the length argument it is provided. This is called by rbd_obj_method_sync(), which returns the result if it's non-negative. But we always either ignore or overwrite that return value. So explicitly ignore what's returned by the copy function, and have rbd_obj_method_sync() always return either a negative errno or 0. We also return the result of ceph_copy_from_page_vector() in rbd_obj_read_sync(). There we still want to return the number of bytes transferred, but we can use the value we already have in hand rather than what ceph_copy_from_page_vector() provides. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-19rbd: prevent bytes transferred overflowAlex Elder
In rbd_obj_read_sync(), verify the number of bytes transferred won't exceed what can be represented by a size_t before using it to indicate the number of bytes to copy to the result buffer. (The real motivation for this is to prepare for the next patch.) Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-19libceph: allow STAT osd operationsAlex Elder
Add support for CEPH_OSD_OP_STAT operations in the osd client and in rbd. This operation sends no data to the osd; everything required is encoded in identity of the target object. The result will be ENOENT if the object doesn't exist. If it does exist and no other error occurs the server returns the size and last modification time of the target object as output data (in little endian format). The size is a 64 bit unsigned and the time is ceph_timespec structure (two unsigned 32-bit integers, representing a seconds and nanoseconds value). This resolves: http://tracker.ceph.com/issues/4007 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-19rbd: add parentheses to object request iterator macrosAlex Elder
The for_each_obj_request*() macros should parenthesize their uses of the ireq parameter. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-19xen-blkback: use balloon pages for persistent grantsRoger Pau Monne
With current persistent grants implementation we are not freeing the persistent grants after we disconnect the device. Since grant map operations change the mfn of the allocated page, and we can no longer pass it to __free_page without setting the mfn to a sane value, use balloon grant pages instead, as the gntdev device does. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Cc: stable@vger.kernel.org Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19xen-blkfront: drop the use of llist_for_each_entry_safeKonrad Rzeszutek Wilk
Replace llist_for_each_entry_safe with a while loop. llist_for_each_entry_safe can trigger a bug in GCC 4.1, so it's best to remove it and use a while loop and do the deletion manually. Specifically this bug can be triggered by hot-unplugging a disk, either by doing xm block-detach or by save/restore cycle. BUG: unable to handle kernel paging request at fffffffffffffff0 IP: [<ffffffffa0047223>] blkif_free+0x63/0x130 [xen_blkfront] The crash call trace is: ... bad_area_nosemaphore+0x13/0x20 do_page_fault+0x25e/0x4b0 page_fault+0x25/0x30 ? blkif_free+0x63/0x130 [xen_blkfront] blkfront_resume+0x46/0xa0 [xen_blkfront] xenbus_dev_resume+0x6c/0x140 pm_op+0x192/0x1b0 device_resume+0x82/0x1e0 dpm_resume+0xc9/0x1a0 dpm_resume_end+0x15/0x30 do_suspend+0x117/0x1e0 When drilling down to the assembler code, on newer GCC it does .L29: cmpq $-16, %r12 #, persistent_gnt check je .L30 #, out of the loop .L25: ... code in the loop testq %r13, %r13 # n je .L29 #, back to the top of the loop cmpq $-16, %r12 #, persistent_gnt check movq 16(%r12), %r13 # <variable>.node.next, n jne .L25 #, back to the top of the loop .L30: While on GCC 4.1, it is: L78: ... code in the loop testq %r13, %r13 # n je .L78 #, back to the top of the loop movq 16(%rbx), %r13 # <variable>.node.next, n jmp .L78 #, back to the top of the loop Which basically means that the exit loop condition instead of being: &(pos)->member != NULL; is: ; which makes the loop unbound. Since xen-blkfront is the only user of the llist_for_each_entry_safe macro remove it from llist.h. Orabug: 16263164 CC: stable@vger.kernel.org Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19xen/blkback: Don't trust the handle from the frontend.Konrad Rzeszutek Wilk
The 'handle' is the device that the request is from. For the life-time of the ring we copy it from a request to a response so that the frontend is not surprised by it. But we do not need it - when we start processing I/Os we have our own 'struct phys_req' which has only most essential information about the request. In fact the 'vbd_translate' ends up over-writing the preq.dev with a value from the backend. This assignment of preq.dev with the 'handle' value is superfluous so lets not do it. Cc: stable@vger.kernel.org Acked-by: Jan Beulich <jbeulich@suse.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-19xen-blkback: do not leak mode propertyJan Beulich
"be->mode" is obtained from xenbus_read(), which does a kmalloc() for the message body. The short string is never released, so do it along with freeing "be" itself, and make sure the string isn't kept when backend_changed() doesn't complete successfully (which made it desirable to slightly re-structure that function, so that the error cleanup can be done in one place). Reported-by: Olaf Hering <olaf@aepfle.de> CC: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2013-02-18block: IBM RamSan 70/80 driver fixesPhilip J Kelleher
This patch includes the following driver fixes for the IBM RamSan 70/80 driver: o Changed the creg_ctrl lock from a mutex to a spinlock. o Added a count check for ioctl calls. o Removed unnecessary casting of void pointers. o Made every function static that needed to be. o Added comments to explain things more thoroughly. Signed-off-by: Philip J Kelleher <pjk1939@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-02-18libceph: kill ceph_osdc_create_event() "one_shot" parameterAlex Elder
There is only one caller of ceph_osdc_create_event(), and it provides 0 as its "one_shot" argument. Get rid of that argument and just use 0 in its place. Replace the code in handle_watch_notify() that executes if one_shot is nonzero in the event with a BUG_ON() call. While modifying "osd_client.c", give handle_watch_notify() static scope. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "A couple small fixes for sparc including some THP brown-paper-bag material: 1) During the merging of all the THP support for various architectures, sparc missed adding a HAVE_ARCH_TRANSPARENT_HUGEPAGE to it's Kconfig, oops. 2) Sparc needs to be mindful of hugepages in get_user_pages_fast(). 3) Fix memory leak in SBUS probe, from Cong Ding. 4) The sunvdc virtual disk client driver has a test of the bitmask of vdisk server supported operations which was off by one bit" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sunvdc: Fix off-by-one in generic_request(). sparc64: Fix get_user_pages_fast() wrt. THP. sparc64: Add missing HAVE_ARCH_TRANSPARENT_HUGEPAGE. sparc: kernel/sbus.c: fix memory leakage
2013-02-14sunvdc: Fix off-by-one in generic_request().David S. Miller
The 'operations' bitmap corresponds one-for-one with the operation codes, no adjustment is necessary. Reported-by: Mark Kettenis <mark.kettenis@xs4all.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-14Merge branch 'delete-xt-disk' of ↵Jens Axboe
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux into for-3.9/drivers Paul writes: Please pull the following to get the removal of the original IBM PC-XT hard disk driver from the block layer (drivers/block/xd.c). As near as I can tell, it hasn't seen a run time fix in over a dozen years, and with drive sizes of 10-20MB, and performance of about 128kB/s maximum, it is no surprise that it has been completely unused for well over a decade. The removal was originally posted[1] well over a month ago, and since then, there has been nobody objecting to the removal, aside from someone who had mistakenly confused it with a completely different driver (hd.c)
2013-02-13rbd: add barriers near done flag operationsAlex Elder
Somehow, I missed this little item in Documentation/atomic_ops.txt: *** WARNING: atomic_read() and atomic_set() DO NOT IMPLY BARRIERS! *** Create and use some helper functions that include the proper memory barriers for manipulating the done field. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-13rbd: turn off interrupts for open/remove lockingAlex Elder
This commit: bc7a62ee5 rbd: prevent open for image being removed added checking for removing rbd before allowing an open, and used the same request spinlock for protecting that and updating the open count as is used for the request queue. However it used the non-irq protected version of the spinlocks. Fix that. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-13libceph: don't require r_num_pages for bio requestsAlex Elder
There is a check in the completion path for osd requests that ensures the number of pages allocated is enough to hold the amount of incoming data expected. For bio requests coming from rbd the "number of pages" is not really meaningful (although total length would be). So stop requiring that nr_pages be supplied for bio requests. This is done by checking whether the pages pointer is null before checking the value of nr_pages. Note that this value is passed on to the messenger, but there it's only used for debugging--it's never used for validation. While here, change another spot that used r_pages in a debug message inappropriately, and also invalidate the r_con_filling_msg pointer after dropping a reference to it. This resolves: http://tracker.ceph.com/issues/3875 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-13rbd: don't take extra bio reference for osd clientAlex Elder
Currently, if the OSD client finds an osd request has had a bio list attached to it, it drops a reference to it (or rather, to the first entry on that list) when the request is released. The code that added that reference (i.e., the rbd client) is therefore required to take an extra reference to that first bio structure. The osd client doesn't really do anything with the bio pointer other than transfer it from the osd request structure to outgoing (for writes) and ingoing (for reads) messages. So it really isn't the right place to be taking or dropping references. Furthermore, the rbd client already holds references to all bio structures it passes to the osd client, and holds them until the request is completed. So there's no need for this extra reference whatsoever. So remove the bio_put() call in ceph_osdc_release_request(), as well as its matching bio_get() call in rbd_osd_req_create(). This change could lead to a crash if old libceph.ko was used with new rbd.ko. Add a compatibility check at rbd initialization time to avoid this possibilty. This resolves: http://tracker.ceph.com/issues/3798 and http://tracker.ceph.com/issues/3799 Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-13rbd: prevent open for image being removedAlex Elder
An open request for a mapped rbd image can arrive while removal of that mapping is underway. We need to prevent such an open request from succeeding. (It appears that Maciej Galkiewicz ran into this problem.) Define and use a "removing" flag to indicate a mapping is getting removed. Set it in the remove path after verifying nothing holds the device open. And check it in the open path before allowing the open to proceed. Acquire the rbd device's lock around each of these spots to avoid any races accessing the flags and open_count fields. This addresses: http://tracker.newdream.net/issues/3427 Reported-by: Maciej Galkiewicz <maciejgalkiewicz@ragnarson.com> Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-02-13rbd: define flags field, use it for exists flagAlex Elder
Define a new rbd device flags field, manipulated using bit operations. Replace the use of the current "exists" flag with a bit in this new "flags" field. Add a little commentary about the "exists" flag, which does not need to be manipulated atomically. Signed-off-by: Alex Elder <elder@inktank.com> Reviewed-by: Josh Durgin <josh.durgin@inktank.com>