summaryrefslogtreecommitdiffstats
path: root/drivers/base
AgeCommit message (Collapse)Author
2019-08-16Merge tag 'soundwire-5.3-rc5' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-linus Vinod writes: soundwire fixes for v5.3-rc5 Pierre sent fixes which are queued now for v5.3-rc5 are: - regmap dependecy - cadence register definitions * tag 'soundwire-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: soundwire: fix regmap dependencies and align with other serial links soundwire: cadence_master: fix definitions for INTSTAT0/1 soundwire: cadence_master: fix register definition for SLAVE_STATE
2019-08-10Merge tag 'driver-core-5.3-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two small fixes for some driver core issues that have been reported. There is also a kernfs "fix" here, which was then reverted because it was found to cause problems in linux-next. The driver core fixes both resolve reported issues, one with gpioint stuff that showed up in 5.3-rc1, and the other finally (and hopefully) resolves a very long standing race when removing glue directories. It's nice to get that issue finally resolved and the developers involved should be applauded for the persistence it took to get this patch finally accepted. All of these have been in linux-next for a while with no reported issues. Well, the one reported issue, hence the revert :)" * tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Revert "kernfs: fix memleak in kernel_ops_readdir()" kernfs: fix memleak in kernel_ops_readdir() driver core: Fix use-after-free and double free on glue directory driver core: platform: return -ENXIO for missing GpioInt
2019-08-09soundwire: fix regmap dependencies and align with other serial linksPierre-Louis Bossart
The existing code has a mixed select/depend usage which makes no sense. config SOUNDWIRE_BUS tristate select REGMAP_SOUNDWIRE config REGMAP_SOUNDWIRE tristate depends on SOUNDWIRE_BUS Let's remove one layer of Kconfig definitions and align with the solutions used by all other serial links. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20190718230215.18675-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-30driver core: Fix use-after-free and double free on glue directoryMuchun Song
There is a race condition between removing glue directory and adding a new device under the glue dir. It can be reproduced in following test: CPU1: CPU2: device_add() get_device_parent() class_dir_create_and_add() kobject_add_internal() create_dir() // create glue_dir device_add() get_device_parent() kobject_get() // get glue_dir device_del() cleanup_glue_dir() kobject_del(glue_dir) kobject_add() kobject_add_internal() create_dir() // in glue_dir sysfs_create_dir_ns() kernfs_create_dir_ns(sd) sysfs_remove_dir() // glue_dir->sd=NULL sysfs_put() // free glue_dir->sd // sd is freed kernfs_new_node(sd) kernfs_get(glue_dir) kernfs_add_one() kernfs_put() Before CPU1 remove last child device under glue dir, if CPU2 add a new device under glue dir, the glue_dir kobject reference count will be increase to 2 via kobject_get() in get_device_parent(). And CPU2 has been called kernfs_create_dir_ns(), but not call kernfs_new_node(). Meanwhile, CPU1 call sysfs_remove_dir() and sysfs_put(). This result in glue_dir->sd is freed and it's reference count will be 0. Then CPU2 call kernfs_get(glue_dir) will trigger a warning in kernfs_get() and increase it's reference count to 1. Because glue_dir->sd is freed by CPU1, the next call kernfs_add_one() by CPU2 will fail(This is also use-after-free) and call kernfs_put() to decrease reference count. Because the reference count is decremented to 0, it will also call kmem_cache_free() to free the glue_dir->sd again. This will result in double free. In order to avoid this happening, we also should make sure that kernfs_node for glue_dir is released in CPU1 only when refcount for glue_dir kobj is 1 to fix this race. The following calltrace is captured in kernel 4.14 with the following patch applied: commit 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier") -------------------------------------------------------------------------- [ 3.633703] WARNING: CPU: 4 PID: 513 at .../fs/kernfs/dir.c:494 Here is WARN_ON(!atomic_read(&kn->count) in kernfs_get(). .... [ 3.633986] Call trace: [ 3.633991] kernfs_create_dir_ns+0xa8/0xb0 [ 3.633994] sysfs_create_dir_ns+0x54/0xe8 [ 3.634001] kobject_add_internal+0x22c/0x3f0 [ 3.634005] kobject_add+0xe4/0x118 [ 3.634011] device_add+0x200/0x870 [ 3.634017] _request_firmware+0x958/0xc38 [ 3.634020] request_firmware_into_buf+0x4c/0x70 .... [ 3.634064] kernel BUG at .../mm/slub.c:294! Here is BUG_ON(object == fp) in set_freepointer(). .... [ 3.634346] Call trace: [ 3.634351] kmem_cache_free+0x504/0x6b8 [ 3.634355] kernfs_put+0x14c/0x1d8 [ 3.634359] kernfs_create_dir_ns+0x88/0xb0 [ 3.634362] sysfs_create_dir_ns+0x54/0xe8 [ 3.634366] kobject_add_internal+0x22c/0x3f0 [ 3.634370] kobject_add+0xe4/0x118 [ 3.634374] device_add+0x200/0x870 [ 3.634378] _request_firmware+0x958/0xc38 [ 3.634381] request_firmware_into_buf+0x4c/0x70 -------------------------------------------------------------------------- Fixes: 726e41097920 ("drivers: core: Remove glue dirs from sysfs earlier") Signed-off-by: Muchun Song <smuchun@gmail.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Prateek Sood <prsood@codeaurora.org> Link: https://lore.kernel.org/r/20190727032122.24639-1-smuchun@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30driver core: platform: return -ENXIO for missing GpioIntBrian Norris
Commit daaef255dc96 ("driver: platform: Support parsing GpioInt 0 in platform_get_irq()") broke the Embedded Controller driver on most LPC Chromebooks (i.e., most x86 Chromebooks), because cros_ec_lpc expects platform_get_irq() to return -ENXIO for non-existent IRQs. Unfortunately, acpi_dev_gpio_irq_get() doesn't follow this convention and returns -ENOENT instead. So we get this error from cros_ec_lpc: couldn't retrieve IRQ number (-2) I see a variety of drivers that treat -ENXIO specially, so rather than fix all of them, let's fix up the API to restore its previous behavior. I reported this on v2 of this patch: https://lore.kernel.org/lkml/20190220180538.GA42642@google.com/ but apparently the patch had already been merged before v3 got sent out: https://lore.kernel.org/lkml/20190221193429.161300-1-egranata@chromium.org/ and the result is that the bug landed and remains unfixed. I differ from the v3 patch by: * allowing for ret==0, even though acpi_dev_gpio_irq_get() specifically documents (and enforces) that 0 is not a valid return value (noted on the v3 review) * adding a small comment Reported-by: Brian Norris <briannorris@chromium.org> Reported-by: Salvatore Bellizzi <salvatore.bellizzi@linux.seppia.net> Cc: Enrico Granata <egranata@chromium.org> Cc: <stable@vger.kernel.org> Fixes: daaef255dc96 ("driver: platform: Support parsing GpioInt 0 in platform_get_irq()") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Enrico Granata <egranata@google.com> Link: https://lore.kernel.org/r/20190729204954.25510-1-briannorris@chromium.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-28Merge tag 'char-misc-5.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small char and misc driver fixes for 5.3-rc2 to resolve some reported issues. Nothing major at all, some binder bugfixes for issues found, some new mei device ids, firmware building warning fixes, habanalabs fixes, a few other build fixes, and a MAINTAINERS update. All of these have been in linux-next with no reported issues" * tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: test_firmware: fix a memory leak bug hpet: Fix division by zero in hpet_time_div() eeprom: make older eeprom drivers select NVMEM_SYSFS vmw_balloon: Remove Julien from the maintainers list fpga-manager: altera-ps-spi: Fix build error mei: me: add mule creek canyon (EHL) device ids binder: prevent transactions to context manager from its own process. binder: Set end of SG buffer area properly. firmware: Fix missing inline firmware: fix build errors in paged buffer handling code habanalabs: don't reset device when getting VRHOT habanalabs: use %pad for printing a dma_addr_t
2019-07-27Merge tag 'libnvdimm-fixes-5.3-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fixes from Dan Williams: "A collection of locking and async operations fixes for v5.3-rc2. These had been soaking in a branch targeting the merge window, but missed due to a regression hunt. This fixed up version has otherwise been in -next this past week with no reported issues. In order to gain confidence in the locking changes the pull also includes a debug / instrumentation patch to enable lockdep coverage for libnvdimm subsystem operations that depend on the device_lock for exclusion. As mentioned in the changelog it is a hack, but it works and documents the locking expectations of the sub-system in a way that others can use lockdep to verify. The driver core touches got an ack from Greg. Summary: - Fix duplicate device_unregister() calls (multiple threads competing to do unregister work when scheduling device removal from a sysfs attribute of the self-same device). - Fix badblocks registration order bug. Ensure region badblocks are initialized in advance of namespace registration. - Fix a deadlock between the bus lock and probe operations. - Export device-core infrastructure to coordinate async operations via the device ->dead state. - Add device-core infrastructure to validate device_lock() usage with lockdep" * tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: driver-core, libnvdimm: Let device subsystems add local lockdep coverage libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl() libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant libnvdimm/region: Register badblocks before namespaces libnvdimm/bus: Prevent duplicate device_unregister() calls drivers/base: Introduce kill_device()
2019-07-23firmware: Fix missing inlineTakashi Iwai
I mistakenly dropped the inline while resolving the patch conflicts in the previous fix patch. Without inline, we get compiler warnings wrt unused functions. Note that Mauro's original patch contained the correct changes; it's all my fault to submit a patch before a morning coffee. Fixes: c8917b8ff09e ("firmware: fix build errors in paged buffer handling code") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190723081159.22624-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-22firmware: fix build errors in paged buffer handling codeMauro Rossi
fw_{grow,map}_paged_buf() need to be defined as static inline when CONFIG_FW_LOADER_PAGED_BUF is not enabled, infact fw_free_paged_buf() is also defined as static inline when CONFIG_FW_LOADER_PAGED_BUF is not enabled. Fixes the following mutiple definition building errors for Android kernel: drivers/base/firmware_loader/fallback_efi.o: In function `fw_grow_paged_buf': fallback_efi.c:(.text+0x0): multiple definition of `fw_grow_paged_buf' drivers/base/firmware_loader/main.o:(.text+0x73b): first defined here drivers/base/firmware_loader/fallback_efi.o: In function `fw_map_paged_buf': fallback_efi.c:(.text+0xf): multiple definition of `fw_map_paged_buf' drivers/base/firmware_loader/main.o:(.text+0x74a): first defined here [ slightly corrected the patch description -- tiwai ] Fixes: 5342e7093ff2 ("firmware: Factor out the paged buffer handling code") Fixes: 82fd7a8142a1 ("firmware: Add support for loading compressed files") Signed-off-by: Mauro Rossi <issor.oruam@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20190722055536.15342-1-tiwai@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-19Merge branch 'work.mount0' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs mount updates from Al Viro: "The first part of mount updates. Convert filesystems to use the new mount API" * 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) mnt_init(): call shmem_init() unconditionally constify ksys_mount() string arguments don't bother with registering rootfs init_rootfs(): don't bother with init_ramfs_fs() vfs: Convert smackfs to use the new mount API vfs: Convert selinuxfs to use the new mount API vfs: Convert securityfs to use the new mount API vfs: Convert apparmorfs to use the new mount API vfs: Convert openpromfs to use the new mount API vfs: Convert xenfs to use the new mount API vfs: Convert gadgetfs to use the new mount API vfs: Convert oprofilefs to use the new mount API vfs: Convert ibmasmfs to use the new mount API vfs: Convert qib_fs/ipathfs to use the new mount API vfs: Convert efivarfs to use the new mount API vfs: Convert configfs to use the new mount API vfs: Convert binfmt_misc to use the new mount API convenience helper: get_tree_single() convenience helper get_tree_nodev() vfs: Kill sget_userns() ...
2019-07-18proc/sysctl: add shared variables for range checkMatteo Croce
In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18drivers/base/memory.c: get rid of find_memory_block_hinted()David Hildenbrand
No longer needed, let's remove it. Also, drop the "hint" parameter completely from "find_memory_block_by_id", as nobody needs it anymore. [david@redhat.com: v3] Link: http://lkml.kernel.org/r/20190620183139.4352-7-david@redhat.com [david@redhat.com: handle zero-length walks] Link: http://lkml.kernel.org/r/1c2edc22-afd7-2211-c4c7-40e54e5007e8@redhat.com Link: http://lkml.kernel.org/r/20190614100114.311-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Qian Cai <cai@lca.pw> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/memory_hotplug: move and simplify walk_memory_blocks()David Hildenbrand
Let's move walk_memory_blocks() to the place where memory block logic resides and simplify it. While at it, add a type for the callback function. Link: http://lkml.kernel.org/r/20190614100114.311-6-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Mike Travis <mike.travis@hpe.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Qian Cai <cai@lca.pw> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/memory_hotplug: rename walk_memory_range() and pass start+size instead of ↵David Hildenbrand
pfns walk_memory_range() was once used to iterate over sections. Now, it iterates over memory blocks. Rename the function, fixup the documentation. Also, pass start+size instead of PFNs, which is what most callers already have at hand. (we'll rework link_mem_sections() most probably soon) Follow-up patches will rework, simplify, and move walk_memory_blocks() to drivers/base/memory.c. Note: walk_memory_blocks() only works correctly right now if the start_pfn is aligned to a section start. This is the case right now, but we'll generalize the function in a follow up patch so the semantics match the documentation. [akpm@linux-foundation.org: remove unused variable] Link: http://lkml.kernel.org/r/20190614100114.311-5-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oscar Salvador <osalvador@suse.de> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Juergen Gross <jgross@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: Arun KS <arunks@codeaurora.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm: make register_mem_sect_under_node() staticDavid Hildenbrand
It is only used internally. Link: http://lkml.kernel.org/r/20190614100114.311-4-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Keith Busch <keith.busch@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18drivers/base/memory: use "unsigned long" for block idsDavid Hildenbrand
Block ids are just shifted section numbers, so let's also use "unsigned long" for them, too. Link: http://lkml.kernel.org/r/20190614100114.311-3-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm: section numbers use the type "unsigned long"David Hildenbrand
Patch series "mm: Further memory block device cleanups", v1. Some further cleanups around memory block devices. Especially, clean up and simplify walk_memory_range(). Including some other minor cleanups. This patch (of 6): We are using a mixture of "int" and "unsigned long". Let's make this consistent by using "unsigned long" everywhere. We'll do the same with memory block ids next. While at it, turn the "unsigned long i" in removable_show() into an int - sections_per_block is an int. [akpm@linux-foundation.org: s/unsigned long i/unsigned long nr/] [david@redhat.com: v3] Link: http://lkml.kernel.org/r/20190620183139.4352-2-david@redhat.com Link: http://lkml.kernel.org/r/20190614100114.311-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Arun KS <arunks@codeaurora.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/memory_hotplug: make unregister_memory_block_under_nodes() never failDavid Hildenbrand
We really don't want anything during memory hotunplug to fail. We always pass a valid memory block device, that check can go. Avoid allocating memory and eventually failing. As we are always called under lock, we can use a static piece of memory. This avoids having to put the structure onto the stack, having to guess about the stack size of callers. Patch inspired by a patch from Oscar Salvador. In the future, there might be no need to iterate over nodes at all. mem->nid should tell us exactly what to remove. Memory block devices with mixed nodes (added during boot) should properly fenced off and never removed. Link: http://lkml.kernel.org/r/20190527111152.16324-11-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Hildenbrand <david@redhat.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arun KS <arunks@codeaurora.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/memory_hotplug: remove memory block devices before arch_remove_memory()David Hildenbrand
Let's factor out removing of memory block devices, which is only necessary for memory added via add_memory() and friends that created memory block devices. Remove the devices before calling arch_remove_memory(). This finishes factoring out memory block device handling from arch_add_memory() and arch_remove_memory(). Link: http://lkml.kernel.org/r/20190527111152.16324-10-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Oscar Salvador <osalvador@suse.de> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qian Cai <cai@lca.pw> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/memory_hotplug: create memory block devices after arch_add_memory()David Hildenbrand
Only memory to be added to the buddy and to be onlined/offlined by user space using /sys/devices/system/memory/... needs (and should have!) memory block devices. Factor out creation of memory block devices. Create all devices after arch_add_memory() succeeded. We can later drop the want_memblock parameter, because it is now effectively stale. Only after memory block devices have been added, memory can be onlined by user space. This implies, that memory is not visible to user space at all before arch_add_memory() succeeded. While at it - use WARN_ON_ONCE instead of BUG_ON in moved unregister_memory() - introduce find_memory_block_by_id() to search via block id - Use find_memory_block_by_id() in init_memory_block() to catch duplicates Link: http://lkml.kernel.org/r/20190527111152.16324-8-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Qian Cai <cai@lca.pw> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Mathieu Malaterre <malat@debian.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18mm/memory_hotplug: allow arch_remove_memory() without CONFIG_MEMORY_HOTREMOVEDavid Hildenbrand
We want to improve error handling while adding memory by allowing to use arch_remove_memory() and __remove_pages() even if CONFIG_MEMORY_HOTREMOVE is not set to e.g., implement something like: arch_add_memory() rc = do_something(); if (rc) { arch_remove_memory(); } We won't get rid of CONFIG_MEMORY_HOTREMOVE for now, as it will require quite some dependencies for memory offlining. Link: http://lkml.kernel.org/r/20190527111152.16324-7-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Mark Brown <broonie@kernel.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Rob Herring <robh@kernel.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Arun KS <arunks@codeaurora.org> Cc: Qian Cai <cai@lca.pw> Cc: Mathieu Malaterre <malat@debian.org> Cc: Baoquan He <bhe@redhat.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18drivers/base/memory: pass a block_id to init_memory_block()David Hildenbrand
We'll rework hotplug_memory_register() shortly, so it no longer consumes pass a section. [cai@lca.pw: fix a compilation warning] Link: http://lkml.kernel.org/r/1559320186-28337-1-git-send-email-cai@lca.pw Link: http://lkml.kernel.org/r/20190527111152.16324-6-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Andrew Banman <andrew.banman@hpe.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arun KS <arunks@codeaurora.org> Cc: Baoquan He <bhe@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chintan Pandya <cpandya@codeaurora.org> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Jun Yao <yaojun8558363@gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Logan Gunthorpe <logang@deltatee.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "mike.travis@hpe.com" <mike.travis@hpe.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rich Felker <dalias@libc.org> Cc: Rob Herring <robh@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wei Yang <richard.weiyang@gmail.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-18driver-core, libnvdimm: Let device subsystems add local lockdep coverageDan Williams
For good reason, the standard device_lock() is marked lockdep_set_novalidate_class() because there is simply no sane way to describe the myriad ways the device_lock() ordered with other locks. However, that leaves subsystems that know their own local device_lock() ordering rules to find lock ordering mistakes manually. Instead, introduce an optional / additional lockdep-enabled lock that a subsystem can acquire in all the same paths that the device_lock() is acquired. A conversion of the NFIT driver and NVDIMM subsystem to a lockdep-validate device_lock() scheme is included. The debug_nvdimm_lock() implementation implements the correct lock-class and stacking order for the libnvdimm device topology hierarchy. Yes, this is a hack, but hopefully it is a useful hack for other subsystems device_lock() debug sessions. Quoting Greg: "Yeah, it feels a bit hacky but it's really up to a subsystem to mess up using it as much as anything else, so user beware :) I don't object to it if it makes things easier for you to debug." Cc: Ingo Molnar <mingo@redhat.com> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Link: https://lore.kernel.org/r/156341210661.292348.7014034644265455704.stgit@dwillia2-desk3.amr.corp.intel.com
2019-07-18drivers/base: Introduce kill_device()Dan Williams
The libnvdimm subsystem arranges for devices to be destroyed as a result of a sysfs operation. Since device_unregister() cannot be called from an actively running sysfs attribute of the same device libnvdimm arranges for device_unregister() to be performed in an out-of-line async context. The driver core maintains a 'dead' state for coordinating its own racing async registration / de-registration requests. Rather than add local 'dead' state tracking infrastructure to libnvdimm device objects, export the existing state tracking via a new kill_device() helper. The kill_device() helper simply marks the device as dead, i.e. that it is on its way to device_del(), or returns that the device was already dead. This can be used in advance of calling device_unregister() for subsystems like libnvdimm that might need to handle multiple user threads racing to delete a device. This refactoring does not change any behavior, but it is a pre-requisite for follow-on fixes and therefore marked for -stable. Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Fixes: 4d88a97aa9e8 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver...") Cc: <stable@vger.kernel.org> Tested-by: Jane Chu <jane.chu@oracle.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/156341207332.292348.14959761496009347574.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2019-07-18Merge tag 'pm-5.3-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These modify the Intel RAPL driver to allow it to use an MMIO interface to the hardware, make the int340X thermal driver provide such an interface for it, add Intel Ice Lake CPU IDs to the RAPL driver (these changes depend on the previously merged x86 arch changes), update cpufreq to use the PM QoS framework for managing the min and max frequency limits, and add update the imx-cpufreq-dt cpufreq driver to support i.MX8MN. Specifics: - Add MMIO interface support to the Intel RAPL power capping driver and update the int340X thermal driver to provide a RAPL MMIO interface (Zhang Rui, Stephen Rothwell). - Add Intel Ice Lake CPU IDs to the RAPL driver (Zhang Rui, Rajneesh Bhardwaj). - Make cpufreq use the PM QoS framework (instead of notifiers) for managing the min and max frequency constraints (Viresh Kumar). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang)" * tag 'pm-5.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (27 commits) cpufreq: Make cpufreq_generic_init() return void intel_rapl: need linux/cpuhotplug.h for enum cpuhp_state powercap/rapl: Add Ice Lake NNPI support to RAPL driver powercap/intel_rapl: add support for ICX-D powercap/intel_rapl: add support for ICX powercap/intel_rapl: add support for IceLake desktop intel_rapl: Fix module autoloading issue int340X/processor_thermal_device: add support for MMIO RAPL intel_rapl: support two power limits for every RAPL domain intel_rapl: support 64 bit register intel_rapl: abstract RAPL common code intel_rapl: cleanup hardcoded MSR access intel_rapl: cleanup some functions intel_rapl: abstract register access operations intel_rapl: abstract register address intel_rapl: introduce struct rapl_if_private intel_rapl: introduce intel_rapl.h intel_rapl: remove hardcoded register index intel_rapl: use reg instead of msr cpufreq: imx-cpufreq-dt: Add i.MX8MN support ...
2019-07-18Merge branch 'pm-cpufreq'Rafael J. Wysocki
* pm-cpufreq: cpufreq: Make cpufreq_generic_init() return void cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Add QoS requests for userspace constraints cpufreq: intel_pstate: Reuse refresh_frequency_limits() cpufreq: Register notifiers with the PM QoS framework PM / QoS: Add support for MIN/MAX frequency constraints PM / QOS: Pass request type to dev_pm_qos_read_value() PM / QOS: Rename __dev_pm_qos_read_value() and dev_pm_qos_raw_read_value() PM / QOS: Pass request type to dev_pm_qos_{add|remove}_notifier()
2019-07-15docs: driver-model: move it to the driver-api bookMauro Carvalho Chehab
The audience for the Kernel driver-model is clearly Kernel hackers. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> # ice driver changes
2019-07-12Merge tag 'driver-core-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and debugfs updates from Greg KH: "Here is the "big" driver core and debugfs changes for 5.3-rc1 It's a lot of different patches, all across the tree due to some api changes and lots of debugfs cleanups. Other than the debugfs cleanups, in this set of changes we have: - bus iteration function cleanups - scripts/get_abi.pl tool to display and parse Documentation/ABI entries in a simple way - cleanups to Documenatation/ABI/ entries to make them parse easier due to typos and other minor things - default_attrs use for some ktype users - driver model documentation file conversions to .rst - compressed firmware file loading - deferred probe fixes All of these have been in linux-next for a while, with a bunch of merge issues that Stephen has been patient with me for" * tag 'driver-core-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (102 commits) debugfs: make error message a bit more verbose orangefs: fix build warning from debugfs cleanup patch ubifs: fix build warning after debugfs cleanup patch driver: core: Allow subsystems to continue deferring probe drivers: base: cacheinfo: Ensure cpu hotplug work is done before Intel RDT arch_topology: Remove error messages on out-of-memory conditions lib: notifier-error-inject: no need to check return value of debugfs_create functions swiotlb: no need to check return value of debugfs_create functions ceph: no need to check return value of debugfs_create functions sunrpc: no need to check return value of debugfs_create functions ubifs: no need to check return value of debugfs_create functions orangefs: no need to check return value of debugfs_create functions nfsd: no need to check return value of debugfs_create functions lib: 842: no need to check return value of debugfs_create functions debugfs: provide pr_fmt() macro debugfs: log errors when something goes wrong drivers: s390/cio: Fix compilation warning about const qualifiers drivers: Add generic helper to match by of_node driver_find_device: Unify the match function with class_find_device() bus_find_device: Unify the match callback with class_find_device ...
2019-07-09Merge tag 'devprop-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "These add helpers for counting items in a property array and extend the "software nodes" support to be more convenient for representing device properties supplied by drivers and make the intel_cht_int33fe driver use that. Specifics: - Add helpers to count items in a property array (Andy Shevchenko). - Extend "software nodes" support to be more convenient for representing device properties supplied by drivers (Heikki Krogerus). - Add device_find_child_by_name() helper to the driver core (Heikki Krogerus). - Extend device connection code to also look for references provided via fwnode pointers (Heikki Krogerus). - Start to register proper struct device objects for USB Type-C muxes and orientation switches (Heikki Krogerus). - Update the intel_cht_int33fe driver to describe devices in a more general way with the help of "software nodes" (Heikki Krogerus)" * tag 'devprop-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: device property: Add helpers to count items in an array platform/x86: intel_cht_int33fe: Replacing the old connections with references platform/x86: intel_cht_int33fe: Supply fwnodes for the external dependencies platform/x86: intel_cht_int33fe: Provide fwnode for the USB connector platform/x86: intel_cht_int33fe: Provide software nodes for the devices platform/x86: intel_cht_int33fe: Remove unused fusb302 device property platform/x86: intel_cht_int33fe: Register max17047 in its own function usb: typec: Registering real device entries for the muxes device connection: Find connections also by checking the references device property: Introduce fwnode_find_reference() ACPI / property: Don't limit named child node matching to data nodes driver core: Add helper device_find_child_by_name() software node: Add software_node_get_reference_args() software node: Use kobject name when finding child nodes by name software node: Add support for static node descriptors software node: Simplify software_node_release() function software node: Allow node creation without properties
2019-07-09Merge tag 'pm-5.3-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update PCI and ACPI power management (improved handling of ACPI power resources and PCIe link delays, fixes related to corner cases, hibernation handling rework), fix and extend the operating performance points (OPP) framework, add new cpufreq drivers for Raspberry Pi and imx8m chips, update some other cpufreq drivers, clean up assorted pieces of PM code and documentation and update tools. Specifics: - Improve the handling of shared ACPI power resources in the PCI bus type layer (Mika Westerberg). - Make the PCI layer take link delays required by the PCIe spec into a