summaryrefslogtreecommitdiffstats
path: root/drivers/base
AgeCommit message (Collapse)Author
2013-05-23Merge tag 'driver-core-3.10-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg Kroah-Hartman: "Here are 3 tiny driver core fixes for 3.10-rc2. A needed symbol export, a change to make it easier to track down offending sysfs files with incorrect attributes, and a klist bugfix. All have been in linux-next for a while" * tag 'driver-core-3.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: klist: del waiter from klist_remove_waiters before wakeup waitting process driver core: print sysfs attribute name when warning about bogus permissions driver core: export subsys_virtual_register
2013-05-21driver core: print sysfs attribute name when warning about bogus permissionsdyoung@redhat.com
Make it obvious to see what attribute is using bogus permissions. Signed-off-by: Dave Young <dyoung@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-21driver core: export subsys_virtual_registerGreg Kroah-Hartman
Modules want to call this function, so it needs to be exported. Reported-by: Daniel Mack <zonque@gmail.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-05-12PM: Avoid calling kfree() under spinlock in dev_pm_put_subsys_data()Shuah Khan
Fix dev_pm_put_subsys_data() so that it doesn't call kfree() under a spinlock and make it return 1 whenever it leaves NULL power.subsys_data (regardless of the reason). Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Reviewed-by: Pavel Machek <pavel@ucw.cz> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-05-01Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: "Assorted fixes and cleanups to the existing drivers plus a new driver for IMS Passenger Control Unit device they use for ther in-flight entertainment system." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits) Input: trackpoint - Optimize trackpoint init to use power-on reset Input: apbps2 - convert to devm_ioremap_resource() Input: ALPS - use %ph to print buffers ARM - shmobile: Armadillo800EVA: Move st1232 reset pin handling Input: st1232 - add reset pin handling Input: st1232 - convert to devm_* infrastructure Input: MT - handle semi-mt devices in core Input: adxl34x - use spi_get_drvdata() Input: ad7877 - use spi_get_drvdata() and spi_set_drvdata() Input: ads7846 - use spi_get_drvdata() and spi_set_drvdata() Input: ims-pcu - fix a memory leak on error Input: sysrq - supplement reset sequence with timeout functionality Input: tegra-kbc - support for defining row/columns based on SoC Input: imx_keypad - switch to using managed resources Input: arc_ps2 - add support for device tree Input: mma8450 - fix signed 12bits to 32bits conversion Input: eeti_ts - remove redundant null check Input: edt-ft5x06 - remove redundant null check before kfree Input: ad714x - add CONFIG_PM_SLEEP to suspend/resume functions Input: adxl34x - add CONFIG_PM_SLEEP to suspend/resume functions ...
2013-05-01dma-buf: Add debugfs supportSumit Semwal
Add debugfs support to make it easier to print debug information about the dma-buf buffers. Cc: Dave Airlie <airlied@redhat.com> [minor fixes on init and warning fix] Cc: Dan Carpenter <dan.carpenter@oracle.com> [remove double unlock in fail case] Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2013-05-01dma-buf: replace dma_buf_export() with dma_buf_export_named()Sumit Semwal
For debugging purposes, it is useful to have a name-string added while exporting buffers. Hence, dma_buf_export() is replaced with dma_buf_export_named(), which additionally takes 'exp_name' as a parameter. For backward compatibility, and for lazy exporters who don't wish to name themselves, a #define dma_buf_export() is also made available, which adds a __FILE__ instead of 'exp_name'. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> [Thanks for the idea!] Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2013-04-30Merge tag 'pm+acpi-3.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI updates from Rafael J Wysocki: - ARM big.LITTLE cpufreq driver from Viresh Kumar. - exynos5440 cpufreq driver from Amit Daniel Kachhap. - cpufreq core cleanup and code consolidation from Viresh Kumar and Stratos Karafotis. - cpufreq scalability improvement from Nathan Zimmer. - AMD "frequency sensitivity feedback" powersave bias for the ondemand cpufreq governor from Jacob Shin. - cpuidle code consolidation and cleanups from Daniel Lezcano. - ARM OMAP cpuidle fixes from Santosh Shilimkar and Daniel Lezcano. - ACPICA fixes and other improvements from Bob Moore, Jung-uk Kim, Lv Zheng, Yinghai Lu, Tang Chen, Colin Ian King, and Linn Crosetto. - ACPI core updates related to hotplug from Toshi Kani, Paul Bolle, Yasuaki Ishimatsu, and Rafael J Wysocki. - Intel Lynxpoint LPSS (Low-Power Subsystem) support improvements from Rafael J Wysocki and Andy Shevchenko. * tag 'pm+acpi-3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (192 commits) cpufreq: Revert incorrect commit 5800043 cpufreq: MAINTAINERS: Add co-maintainer cpuidle: add maintainer entry ACPI / thermal: do not always return THERMAL_TREND_RAISING for active trip points ARM: s3c64xx: cpuidle: use init/exit common routine cpufreq: pxa2xx: initialize variables ACPI: video: correct acpi_video_bus_add error processing SH: cpuidle: use init/exit common routine ARM: S5pv210: compiling issue, ARM_S5PV210_CPUFREQ needs CONFIG_CPU_FREQ_TABLE=y ACPI: Fix wrong parameter passed to memblock_reserve cpuidle: fix comment format pnp: use %*phC to dump small buffers isapnp: remove debug leftovers ARM: imx: cpuidle: use init/exit common routine ARM: davinci: cpuidle: use init/exit common routine ARM: kirkwood: cpuidle: use init/exit common routine ARM: calxeda: cpuidle: use init/exit common routine ARM: tegra: cpuidle: use init/exit common routine for tegra3 ARM: tegra: cpuidle: use init/exit common routine for tegra2 ARM: OMAP4: cpuidle: use init/exit common routine ...
2013-04-29Merge branch 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wqLinus Torvalds
Pull workqueue updates from Tejun Heo: "A lot of activities on workqueue side this time. The changes achieve the followings. - WQ_UNBOUND workqueues - the workqueues which are per-cpu - are updated to be able to interface with multiple backend worker pools. This involved a lot of churning but the end result seems actually neater as unbound workqueues are now a lot closer to per-cpu ones. - The ability to interface with multiple backend worker pools are used to implement unbound workqueues with custom attributes. Currently the supported attributes are the nice level and CPU affinity. It may be expanded to include cgroup association in future. The attributes can be specified either by calling apply_workqueue_attrs() or through /sys/bus/workqueue/WQ_NAME/* if the workqueue in question is exported through sysfs. The backend worker pools are keyed by the actual attributes and shared by any workqueues which share the same attributes. When attributes of a workqueue are changed, the workqueue binds to the worker pool with the specified attributes while leaving the work items which are already executing in its previous worker pools alone. This allows converting custom worker pool implementations which want worker attribute tuning to use workqueues. The writeback pool is already converted in block tree and there are a couple others are likely to follow including btrfs io workers. - WQ_UNBOUND's ability to bind to multiple worker pools is also used to make it NUMA-aware. Because there's no association between work item issuer and the specific worker assigned to execute it, before this change, using unbound workqueue led to unnecessary cross-node bouncing and it couldn't be helped by autonuma as it requires tasks to have implicit node affinity and workers are assigned randomly. After these changes, an unbound workqueue now binds to multiple NUMA-affine worker pools so that queued work items are executed in the same node. This is turned on by default but can be disabled system-wide or for individual workqueues. Crypto was requesting NUMA affinity as encrypting data across different nodes can contribute noticeable overhead and doing it per-cpu was too limiting for certain cases and IO throughput could be bottlenecked by one CPU being fully occupied while others have idle cycles. While the new features required a lot of changes including restructuring locking, it didn't complicate the execution paths much. The unbound workqueue handling is now closer to per-cpu ones and the new features are implemented by simply associating a workqueue with different sets of backend worker pools without changing queue, execution or flush paths. As such, even though the amount of change is very high, I feel relatively safe in that it isn't likely to cause subtle issues with basic correctness of work item execution and handling. If something is wrong, it's likely to show up as being associated with worker pools with the wrong attributes or OOPS while workqueue attributes are being changed or during CPU hotplug. While this creates more backend worker pools, it doesn't add too many more workers unless, of course, there are many workqueues with unique combinations of attributes. Assuming everything else is the same, NUMA awareness costs an extra worker pool per NUMA node with online CPUs. There are also a couple things which are being routed outside the workqueue tree. - block tree pulled in workqueue for-3.10 so that writeback worker pool can be converted to unbound workqueue with sysfs control exposed. This simplifies the code, makes writeback workers NUMA-aware and allows tuning nice level and CPU affinity via sysfs. - The conversion to workqueue means that there's no 1:1 association between a specific worker, which makes writeback folks unhappy as they want to be able to tell which filesystem caused a problem from backtrace on systems with many filesystems mounted. This is resolved by allowing work items to set debug info string which is printed when the task is dumped. As this change involves unifying implementations of dump_stack() and friends in arch codes, it's being routed through Andrew's -mm tree." * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: (84 commits) workqueue: use kmem_cache_free() instead of kfree() workqueue: avoid false negative WARN_ON() in destroy_workqueue() workqueue: update sysfs interface to reflect NUMA awareness and a kernel param to disable NUMA affinity workqueue: implement NUMA affinity for unbound workqueues workqueue: introduce put_pwq_unlocked() workqueue: introduce numa_pwq_tbl_install() workqueue: use NUMA-aware allocation for pool_workqueues workqueue: break init_and_link_pwq() into two functions and introduce alloc_unbound_pwq() workqueue: map an unbound workqueues to multiple per-node pool_workqueues workqueue: move hot fields of workqueue_struct to the end workqueue: make workqueue->name[] fixed len workqueue: add workqueue->unbound_attrs workqueue: determine NUMA node of workers accourding to the allowed cpumask workqueue: drop 'H' from kworker names of unbound worker pools workqueue: add wq_numa_tbl_len and wq_numa_possible_cpumask[] workqueue: move pwq_pool_locking outside of get/put_unbound_pool() workqueue: fix memory leak in apply_workqueue_attrs() workqueue: fix unbound workqueue attrs hashing / comparison workqueue: fix race condition in unbound workqueue free path workqueue: remove pwq_lock which is no longer used ...
2013-04-29Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge first batch of fixes from Andrew Morton: - A couple of kthread changes - A few minor audit patches - A number of fbdev patches. Florian remains AWOL so I'm picking up some of these. - A few kbuild things - ocfs2 updates - Almost all of the MM queue (And in the meantime, I already have the second big batch from Andrew pending in my mailbox ;^) * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (149 commits) memcg: take reference before releasing rcu_read_lock mem hotunplug: fix kfree() of bootmem memory mmKconfig: add an option to disable bounce mm, nobootmem: do memset() after memblock_reserve() mm, nobootmem: clean-up of free_low_memory_core_early() fs/buffer.c: remove unnecessary init operation after allocating buffer_head. numa, cpu hotplug: change links of CPU and node when changing node number by onlining CPU mm: fix memory_hotplug.c printk format warning mm: swap: mark swap pages writeback before queueing for direct IO swap: redirty page if page write fails on swap file mm, memcg: give exiting processes access to memory reserves thp: fix huge zero page logic for page with pfn == 0 memcg: avoid accessing memcg after releasing reference fs: fix fsync() error reporting memblock: fix missing comment of memblock_insert_region() mm: Remove unused parameter of pages_correctly_reserved() firmware, memmap: fix firmware_map_entry leak mm/vmstat: add note on safety of drain_zonestat mm: thp: add split tail pages to shrink page list in page reclaim mm: allow for outstanding swap writeback accounting ...
2013-04-29Merge tag 'regmap-v3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "In user visible terms just a couple of enhancements here, though there was a moderate amount of refactoring required in order to support the register cache sync performance improvements. - Support for block and asynchronous I/O during register cache syncing; this provides a use case dependant performance improvement. - Additional debugfs information on the memory consuption and register set" * tag 'regmap-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (23 commits) regmap: don't corrupt work buffer in _regmap_raw_write() regmap: cache: Fix format specifier in dev_dbg regmap: cache: Make regcache_sync_block_raw static regmap: cache: Write consecutive registers in a single block write regmap: cache: Split raw and non-raw syncs regmap: cache: Factor out block sync regmap: cache: Factor out reg_present support from rbtree cache regmap: cache: Use raw I/O to sync rbtrees if we can regmap: core: Provide regmap_can_raw_write() operation regmap: cache: Provide a get address of value operation regmap: Cut down on the average # of nodes in the rbtree cache regmap: core: Make raw write available to regcache regmap: core: Warn on invalid operation combinations regmap: irq: Clarify error message when we fail to request primary IRQ regmap: rbtree Expose total memory consumption in the rbtree debugfs entry regmap: debugfs: Add a registers `range' file regmap: debugfs: Simplify calculation of `c->max_reg' regmap: cache: Store caches in native register format where possible regmap: core: Split out in place value parsing regmap: cache: Use regcache_get_value() to check if we updated ...
2013-04-29numa, cpu hotplug: change links of CPU and node when changing node number by ↵Yasuaki Ishimatsu
onlining CPU When booting x86 system contains memoryless node, node numbers of CPUs on memoryless node were changed to nearest online node number by init_cpu_to_node() because the node is not online. In my system, node numbers of cpu#30-44 and 75-89 were changed from 2 to 0 as follows: $ numactl --hardware available: 2 nodes (0-1) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 node 0 size: 32394 MB node 0 free: 27898 MB node 1 cpus: 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 node 1 size: 32768 MB node 1 free: 30335 MB If we hot add memory to memoryless node and offine/online all CPUs on the node, node numbers of these CPUs are changed to correct node numbers by srat_detect_node() because the node become online. In this case, node numbers of cpu#30-44 and 75-89 were changed from 0 to 2 in my system as follows: $ numactl --hardware available: 3 nodes (0-2) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 node 0 size: 32394 MB node 0 free: 27218 MB node 1 cpus: 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 node 1 size: 32768 MB node 1 free: 30014 MB node 2 cpus: 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 node 2 size: 16384 MB node 2 free: 16384 MB But "cpu to node" and "node to cpu" links were not changed as follows: $ ls /sys/devices/system/cpu/cpu30/|grep node node0 $ ls /sys/devices/system/node/node0/|grep cpu30 cpu30 "numactl --hardware" shows that cpu30 belongs to node 2. But sysfs links does not change. This patch changes "cpu to node" and "node to cpu" links when node number changed by onlining CPU. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29mm: Remove unused parameter of pages_correctly_reserved()Tang Chen
nr_pages is not used in pages_correctly_reserved(). So remove it. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com> Reviewed-by: Wen Congyang <wency@cn.fujitsu.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29mm, hotplug: avoid compiling memory hotremove functions when disabledDavid Rientjes
__remove_pages() is only necessary for CONFIG_MEMORY_HOTREMOVE. PowerPC pseries will return -EOPNOTSUPP if unsupported. Adding an #ifdef causes several other functions it depends on to also become unnecessary, which saves in .text when disabled (it's disabled in most defconfigs besides powerpc, including x86). remove_memory_block() becomes static since it is not referenced outside of drivers/base/memory.c. Build tested on x86 and powerpc with CONFIG_MEMORY_HOTREMOVE both enabled and disabled. Signed-off-by: David Rientjes <rientjes@google.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29drivers/base/node.c: switch to register_hotmemory_notifier()Andrew Morton
Squishes a warning which my change to hotplug_memory_notifier() added. I want to keep that warning, because it is punishment for failnig to check the hotplug_memory_notifier() return value. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-28Merge branch 'pm-assorted'Rafael J. Wysocki
* pm-assorted: PM / OPP: add documentation to RCU head in struct opp PM / sleep: invalidate TEST_CPUS and TEST_CORE support for freeze state PM / sleep: add TEST_PLATFORM support for freeze state
2013-04-28Merge branch 'pm-runtime'Rafael J. Wysocki
* pm-runtime: PM / Runtime: Improve prepare handling at system suspend for genpd PM / Runtime: Asyncronous idle|suspend parent devices at removal PM / Runtime: Asyncronous idle|suspend devices at system resume
2013-04-16Merge remote-tracking branch 'regmap/topic/range' into regmap-nextMark Brown
2013-04-16Merge remote-tracking branch 'regmap/topic/irq' into regmap-nextMark Brown
2013-04-16Merge remote-tracking branch 'regmap/topic/cache' into regmap-nextMark Brown
2013-04-16Merge remote-tracking branch 'regmap/topic/async' into regmap-nextMark Brown
2013-04-16regmap: don't corrupt work buffer in _regmap_raw_write()Stephen Warren
_regmap_raw_write() contains code to call regcache_write() to write values to the cache. That code calls memcpy() to copy the value data to the start of the work_buf. However, at least when _regmap_raw_write() is called from _regmap_bus_raw_write(), the value data is in the work_buf, and this memcpy() operation may over-write part of that value data, depending on the value of reg_bytes + pad_bytes. At least when using reg_bytes==1 and pad_bytes==0, corruption of the value data does occur. To solve this, remove the memcpy() operation, and modify the subsequent .parse_val() call to parse the original value buffer directly. At least in the case of 8-bit register address and 16-bit values, and writes of single registers at a time, this memcpy-then-parse combination used to cancel each-other out; for a work-buffer containing xx 89 03, the memcpy changed it to 89 03 03, and the parse_val changed it back to 89 89 03, thus leaving the value uncorrupted. This appears completely accidental though. Since commit 8a819ff "regmap: core: Split out in place value parsing", .parse_val only returns the parsed value, and does not modify the buffer, and hence does not (accidentally) undo the corruption caused by memcpy(). This caused bogus values to get written to HW, thus preventing e.g. audio playback on systems with a WM8903 CODEC. This patch fixes that. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-16Merge tag 'v3.9-rc7' into regmap-cacheMark Brown
Linux 3.9-rc7
2013-04-14Merge 3.9-rc7 into driver-core-nextGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-12PM / Runtime: Improve prepare handling at system suspend for genpdUlf Hansson
When genpd prepares for a system suspend it will fetch a runtime reference for the device. When returning it we now use the asyncronous runtime PM API. Thus we don't have to wait for the device to become idle|suspended before we move on and handle the next device in queue. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-12PM / Runtime: Asyncronous idle|suspend parent devices at removalUlf Hansson
For irq safe devices return the runtime reference for the parent by using the asyncronous runtime PM API. Thus we don't have to wait for it to become idle|suspended. Instead we can move on and handle the next device in queue. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-12PM / Runtime: Asyncronous idle|suspend devices at system resumeUlf Hansson
Use the asyncronous runtime PM API when returning the runtime reference for the device after the system resume is completed. By using the asyncronous runtime PM API we don't have to wait for each an every device to become idle|suspended. Instead we can move on and handle the next device in queue. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-11PM / Runtime: Idle devices asynchronously after probe|releaseUlf Hansson
Putting devices into idle|suspend in a synchronous manner means we are waiting for each device to become idle|suspended before the probe|release is fully done. This patch switch to use the asynchronous runtime PM API:s instead and thus improves the parallelism since we can move on and handle the next device in queue in an earlier phase. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-11driver core: handle user namespaces properly with the uid/gid devtmpfs changeGreg Kroah-Hartman
Now that devtmpfs is caring about uid/gid, we need to use the correct internal types so users who have USER_NS enabled will have things work properly for them. Thanks to Eric for pointing this out, and the patch review. Reported-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-10driver core: devtmpfs: fix compile failure with CONFIG_UIDGID_STRICT_TYPE_CHECKSMing Lei
If CONFIG_UIDGID_STRICT_TYPE_CHECKS is enalbed, the below compile failure will be triggered: drivers/base/devtmpfs.c: In function 'handle_create': drivers/base/devtmpfs.c:214:19: error: incompatible types when assigning to type 'kuid_t' from type 'uid_t' drivers/base/devtmpfs.c:215:19: error: incompatible types when assigning to type 'kgid_t' from type 'gid_t' make[2]: *** [drivers/base/devtmpfs.o] Error 1 This patch fixes the compile failure. Signed-off-by: Ming Lei <ming.lei@canonical.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-10devtmpfs: add base.h includeGreg Kroah-Hartman
This fixes a sparse warning, and is a good idea given that the devtmpfs_init() prototype is in this file. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-09regmap: Back out work buffer fixMark Brown
This reverts commit bc8ce4 (regmap: don't corrupt work buffer in _regmap_raw_write()) since it turns out that it can cause issues when taken in isolation from the other changes in -next that lead to its discovery. On the basis that nobody noticed the problems for quite some time without that subsequent work let's drop it from v3.9. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-08driver core: add uid and gid to devtmpfsKay Sievers
Some drivers want to tell userspace what uid and gid should be used for their device nodes, so allow that information to percolate through the driver core to userspace in order to make this happen. This means that some systems (i.e. Android and friends) will not need to even run a udev-like daemon for their device node manager and can just rely in devtmpfs fully, reducing their footprint even more. Signed-off-by: Kay Sievers <kay@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-05PM / OPP: add documentation to RCU head in struct oppNishanth Menon
commit dde8437 (PM / OPP: RCU reclaim) introduced rcu_head for struct opp. This aids freeing using kfree_rcu. However, we missed adding documentation for the same. This generates kernel doc warning: Warning(drivers/base/power/opp.c:70): No description found for parameter 'head' Add documentation as appropriate. [rjw: Changelog] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-04-05regmap: cache: Fix format specifier in dev_dbgStratos Karafotis
Fix format specifier in dev_dbg and suppress the following warning drivers/base/regmap/regcache.c: In function ‘regcache_sync_block_raw_flush’: drivers/base/regmap/regcache.c:593:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘size_t’ [-Wformat] Signed-off-by: Stratos Karafotis <stratosk@semaphore.gr> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-05regmap: cache: Make regcache_sync_block_raw staticSachin Kamat
regcache_sync_block_raw is used only in this file. Hence make it static. Silences the following warning: drivers/base/regmap/regcache.c:608:5: warning: symbol 'regcache_sync_block_raw' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2013-04-04Merge tag 'pm+acpi-3.9-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Revert of a recent cpuidle change that caused Nehalem machines to hang on boot from Alex Shi. - USB power management fix addressing a crash in the port device object's release routine from Rafael J Wysocki. - Device PM QoS fix for a potential deadlock related to sysfs interface from Rafael J Wysocki. - Fix for a cpufreq crash when the /cpus Device Tree node is missing from Paolo Pisati. - Fix for a build issue on ia64 related to the Boot Graphics Resource Table (BGRT) from Tony Luck. - Two fixes for ACPI handles being set incorrectly for device objects that don't correspond to any ACPI namespace nodes in the I2C and SPI subsystems from Rafael J Wysocki. - Fix for compiler warnings related to CONFIG_PM_DEVFREQ being unset from Rajagopal Venkat. - Fix for a symbol definition typo in cpufreq_governor.h from Borislav Petkov. * tag 'pm+acpi-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / BGRT: Don't let users configure BGRT on non X86 systems cpuidle / ACPI: recover percpu ACPI processor cstate ACPI / I2C: Use parent's ACPI_HANDLE() in acpi_i2c_register_devices() cpufreq: Correct header guards typo ACPI / SPI: Use parent's ACPI_HANDLE() in acpi_register_spi_devices() cpufreq: check OF node /cpus presence before dereferencing it PM / devfreq: Fix compiler warnings for CONFIG_PM_DEVFREQ unset PM / QoS: Avoid possible deadlock related to sysfs access USB / PM: Don't try to hide PM QoS flags from usb_port_device_release()
2013-04-03sysfs: fix crash_notes_size build warningArnd Bergmann
commit eca4549f57 "sysfs: Add crash_notes_size to export percpu note size" adds a printk that outputs a size_t value as %lu when it should be %zu, resulting in this warning. drivers/base/cpu.c: In function 'show_crash_notes_size': drivers/base/cpu.c:142:2: warning: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'unsigned int' [-Wformat=] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-04-01Merge tag 'v3.9-rc5' into wq/for-3.10Tejun Heo
Writeback conversion to workqueue will be based on top of wq/for-3.10 branch to take advantage of custom attrs and NUMA support for unbound workqueues. Mainline currently contains two commits which result in non-trivial merge conflicts with wq/for-3.10 and because block/for-3.10/core is based on v3.9-rc3 which contains one of the conflicting commits, we need a pre-merge-window merge anyway. Let's pull v3.9-rc5 into wq/for-3.10 so that the block tree doesn't suffer from workqueue merge conflicts. The two conflicts and their resolutions: * e68035fb65 ("workqueue: convert to idr_alloc()") in mainline changes worker_pool_assign_id() to use idr_alloc() instead of the old idr interface. worker_pool_assign_id() goes through multiple locking changes in wq/for-3.10 causing the following conflict. static int worker_pool_assign_id(struct worker_pool *pool) { int ret; <<<<<<< HEAD lockdep_assert_held(&wq_pool_mutex); do { if (!idr_pre_get(&worker_pool_idr, GFP_KERNEL)) return -ENOMEM; ret = idr_get_new(&worker_pool_idr, pool, &pool->id); } while (ret == -EAGAIN); ======= mutex_lock(&worker_pool_idr_mutex); ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL); if (ret >= 0) pool->id = ret; mutex_unlock(&worker_pool_idr_mutex); >>>>>>> c67bf5361e7e66a0ff1f4caf95f89347d55dfb89 return ret < 0 ? ret : 0; } We want locking from the former and idr_alloc() usage from the latter, which can be combined to the following. static int worker_pool_assign_id(struct worker_pool *pool) { int ret; lockdep_assert_held(&wq_pool_mutex); ret = idr_alloc(&worker_pool_idr, pool, 0, 0, GFP_KERNEL); if (ret >= 0) { pool->id = ret; return 0; } return ret; } * eb2834285c ("workqueue: fix possible pool stall bug in wq_unbind_fn()") updated wq_unbind_fn() such that it has single larger for_each_std_worker_pool() loop instead of two separate loops with a schedule() call inbetween. wq/for-3.10 renamed pool->assoc_mutex to pool->manager_mutex causing the following conflict (earlier function body and comments omitted for brevity). static void wq_unbind_fn(struct work_struct *work) { ... spin_unlock_irq(&pool->lock); <<<<<<< HEAD mutex_unlock(&pool->manager_mutex); } ======= mutex_unlock(&pool->assoc_mutex); >>>>>>> c67bf5361e7e66a0ff1f4caf95f89347d55dfb89 schedule(); <<<<<<< HEAD for_each_cpu_worker_pool(pool, cpu) ======= >>>>>>> c67bf5361e7e66a0ff1f4caf95f89347d55dfb89 atomic_set(&pool->nr_running, 0); spin_lock_irq(&pool->lock); wake_up_worker(pool); spin_unlock_irq(&pool->lock); } } The resolution is mostly trivial. We want the control flow of the latter with the rename of the former. static void wq_unbind_fn(struct work_struct *work) { ... spin_unlock_irq(&pool->lock); mutex_unlock(&pool->manager_mutex); schedule(); atomic_set(&pool->nr_running, 0); spin_lock_irq(&pool->lock); wake_up_worker(pool); spin_unlock_irq(&pool->lock); } } Signed-off-by: Tejun Heo <tj@kernel.org>
2013-04-02PM / QoS: Avoid possible deadlock related to sysfs accessRafael J. Wysocki
Commit b81ea1b (PM / QoS: Fix concurrency issues and memory leaks in device PM QoS) put calls to pm_qos_sysfs_add_latency(), pm_qos_sysfs_add_flags(), pm_qos_sysfs_remove_latency(), and pm_qos_sysfs_remove_flags() under dev_pm_qos_mtx, which was a mistake, because it may lead to deadlocks in some situations. For example, if pm_qos_remote_wakeup_store() is run in parallel with dev_pm_qos_constraints_destroy(), they may deadlock in the following way: ====================================================== [ INFO: possible circular locking dependency detected ] 3.9.0-rc4-next-20130328-sasha-00014-g91a3267 #319 Tainted: G W ------------------------------------------------------- trinity-child6/12371 is trying to acquire lock: (s_active#54){++++.+}, at: [<ffffffff81301631>] sysfs_addrm_finish+0x31/0x60 but task is already holding lock: (dev_pm_qos_mtx){+.+.+.}, at: [<ffffffff81f07cc3>] dev_pm_qos_constraints_destroy+0x23/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (dev_pm_qos_mtx){+.+.+.}: [<ffffffff811811da>] lock_acquire+0x1aa/0x240 [<ffffffff83dab809>] __mutex_lock_common+0x59/0x5e0 [<ffffffff83dabebf>] mutex_lock_nested+0x3f/0x50 [<ffffffff81f07f2f>] dev_pm_qos_update_flags+0x3f/0xc0 [<ffffffff81f05f4f>] pm_qos_remote_wakeup_store+0x3f/0x70 [<ffffffff81efbb43>] dev_attr_store+0x13/0x20 [<ffffffff812ffdaa>] sysfs_write_file+0xfa/0x150 [<ffffffff8127f2c1>] __kernel_write+0x81/0x150 [<ffffffff812afc2d>] write_pipe_buf+0x4d/0x80 [<ffffffff812af57c>] splice_from_pipe_feed+0x7c/0x120 [<ffffffff812afa25>] __splice_from_pipe+0x45/0x80 [<ffffffff812b14fc>] splice_from_pipe+0x4c/0x70 [<ffffffff812b1538>] default_file_splice_write+0x18/0x30 [<ffffffff812afae3>] do_splice_from+0x83/0xb0 [<ffffffff812afb2e>] direct_splice_actor+0x1e/0x20 [<ffffffff812b0277>] splice_direct_to_actor+0xe7/0x200 [<ffffffff812b15bc>] do_splice_direct+0x4c/0x70 [<ffffffff8127eda9>] do_sendfile+0x169/0x300 [<ffffffff8127ff94>] SyS_sendfile64+0x64/0xb0 [<ffffffff83db7d18>] tracesys+0xe1/0xe6 -> #0 (s_active#54){++++.+}: [<ffffffff811800cf>] __lock_acquire+0x15bf/0x1e50 [<ffffffff811811da>] lock_acquire+0x1aa/0x240 [<ffffffff81300aa2>] sysfs_deactivate+0x122/0x1a0 [<ffffffff81301631>] sysfs_addrm_finish+0x31/0x60 [<ffffffff812ff77f>] sysfs_hash_and_remove+0x7f/0xb0 [<ffffffff813035a1>] sysfs_unmerge_group+0x51/0x70 [<ffffffff81f068f4>] pm_qos_sysfs_remove_flags+0x14/0x20 [<ffffffff81f07490>] __dev_pm_qos_hide_flags+0x30/0x70 [<ffffffff81f07cd5>] dev_pm_qos_constraints_destroy+0x35/0x250 [<ffffffff81f06931>] dpm_sysfs_remove+0x11/0x50 [<ffffffff81efcf6f>] device_del+0x3f/0x1b0 [<ffffffff81efd128>] device_unregister+0x48/0x60 [<ffffffff82d4083c>] usb_hub_remove_port_device+0x1c/0x20 [<ffffffff82d2a9cd>] hub_disconnect+0xdd/0x160 [<ffffffff82d36ab7>] usb_unbind_interface+0x67/0x170 [<ffffffff81f001a7>] __device_release_driver+0x87/0xe0 [<ffffffff81f00559>] device_release_driver+0x29/0x40 [<ffffffff81effc58>] bus_remove_device+0x148/0x160 [<ffffffff81efd07f>] device_del+0x14f/0x1b0 [<ffffffff82d344f9>] usb_disable_device+0xf9/0x280 [<ffffffff82d34ff8>] usb_set_configuration+0x268/0x840 [<ffffffff82d3a7fc>] usb_remove_store+0x4c/0x80 [<ffffffff81efbb43>] dev_attr_store+0x13/0x20 [<ffffffff812ffdaa>] sysfs_write_file+0xfa/0x150 [<ffffffff8127f71d>] do_loop_readv_writev+0x4d/0x90 [<ffffffff8127f999>] do_readv_writev+0xf9/0x1e0 [<ffffffff8127faba>] vfs_writev+0x3a/0x60 [<ffffffff8127fc60>] SyS_writev+0x50/0xd0 [<ffffffff83db7d18>] tracesys+0xe1/0xe6 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(dev_pm_qos_mtx); lock(s_active#54); lock(dev_pm_qos_mtx); lock(s_active#54); *** DEADLOCK *** To avoid that, remove the calls to functions mentioned above from under dev_pm_qos_mtx and introduce a separate lock to prevent races between functions that add or remove device PM QoS sysfs attributes from happening. Reported-by: Sasha Levin <sasha.levin@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-31Merge remote-tracking branch 'regmap/fix/async' into tmpMark Brown
2013-03-31Merge remote-tracking branch 'regmap/fix/core' into tmpMark Brown
2013-03-30regmap: cache: Write consecutive registers in a single block writeMark Brown
When syncing blocks of data using raw writes combine the writes into a single block write, saving us bus overhead for setup, addressing and teardown. Currently the block write is done unconditionally as it is expected that hardware which has a register format which can support raw writes will support auto incrementing writes, this decision may need to be revised in future. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2013-03-30regmap: cache: Split raw and non-raw syncsMark Brown
For code clarity after implementing block writes split out the raw and non-raw I/O sync implementations. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2013-03-30regmap: cache: Factor out block syncMark Brown
The idea of holding blocks of registers in device format is shared between at least rbtree and lzo cache formats so split out the loop that does the sync from the rbtree code so optimisations on it can be reused. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2013-03-30regmap: cache: Factor out reg_present support from rbtree cacheMark Brown
The idea of maintaining a bitmap of present registers is something that can usefully be used by other cache types that maintain blocks of cached registers so move the code out of the rbtree cache and into the generic regcache code. Refactor the interface slightly as we go to wrap the set bit and enlarge bitmap operations (since we never do one without the other) and make it more robust for reads of uncached registers by bounds checking before we look at the bitmap. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Reviewed-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
2013-03-29sysfs: Add crash_notes_size to export percpu note sizeZhang Yanfei
For percpu notes, we are exporting only address and not size. So the userspace tool kexec-tools is putting an upper limit of 1024 and putting the value in p_memsz and p_filesz fields. So the patch add the new sysfile crash_notes_size to export the exact percpu note size and let the kexec-tools parse it intead of using 1024. The idea came from Vivek Goyal. And a later patch will be sent to kexec-tools to let it parse the size. Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Acked-by: Simon Horman <horms@verge.net.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29driver core: platform.c: fix checkpatch errors and warningsFabio Porcedda
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-29driver core: warn that platform_driver_probe can not use deferred probingFabio Porcedda
Add documentation that platform_driver_probe() is incompatible with deferred probing. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-27regmap: async: Add missing returnMark Brown
Let's only write once... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>