| Age | Commit message (Collapse) | Author |
|---|
|
The current deferred probe implementation can mess up suspend/resume
ordering if deferred probe thread is kicked off in parallel with the
main initcall thread (kernel_init thread) [1].
For example:
Say device-B is a consumer of device-A.
Initcall thread Deferred probe thread
=============== =====================
1. device-A is added.
2. device-B is added.
3. dpm_list is now [device-A, device-B].
4. driver-A defers probe of device-A.
5. device-A is moved to
end of dpm_list
6. dpm_list is now
[device-B, device-A]
7. driver-B is registereed and probes device-B.
8. dpm_list stays as [device-B, device-A].
The reverse order of dpm_list is used for suspend. So in this case
device-A would incorrectly get suspended before device-B.
Commit 716a7a259690 ("driver core: fw_devlink: Add support for batching
fwnode parsing") kicked off the deferred probe thread early during boot
to run in parallel with the initcall thread and caused suspend/resume
regressions. This patch removes the parallel run of the deferred probe
thread to avoid the suspend/resume regressions.
[1] - https://lore.kernel.org/lkml/CAGETcx8W96KAw-d_siTX4qHB_-7ddk0miYRDQeHE6E0_8qx-6Q@mail.gmail.com/
Fixes: 716a7a259690 ("driver core: fw_devlink: Add support for batching fwnode parsing")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200701194259.3337652-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The whole point behind adding driver_deferred_probe_force_trigger() in
commit 716a7a259690 ("driver core: fw_devlink: Add support for batching
fwnode parsing") was to skip the check for driver_deferred_probe_enable.
Otherwise, it's identical to driver_deferred_probe_trigger().
Delete the check in driver_deferred_probe_force_trigger() so that
fw_devlink_pause() and fw_devlink_resume() can kick off deferred probe
as intended. Without doing this forced deferred probe trigger, some
platforms seem to be crashing during boot because they assume probe
order of devices.
Fixes: 716a7a259690 ("driver core: fw_devlink: Add support for batching fwnode parsing")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200517173453.157703-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The amount of time spent parsing fwnodes of devices can become really
high if the devices are added in an non-ideal order. Worst case can be
O(N^2) when N devices are added. But this can be optimized to O(N) by
adding all the devices and then parsing all their fwnodes in one batch.
This commit adds fw_devlink_pause() and fw_devlink_resume() to allow
doing this.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20200515053500.215929-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the driver core fixes in here and this resolves a merge issue
with drivers/base/dd.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Message logged by 'dev_xxx()' or 'pr_xxx()' should end with a '\n'.
While at it, convert some "printk(KERN_" into equivalent but less verbose
(pr|dev)_xxx functions.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20200411133158.27390-1-christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
deferred_probe_timeout fires
In commit c8c43cee29f6 ("driver core: Fix
driver_deferred_probe_check_state() logic"), we set the default
driver_deferred_probe_timeout value to 30 seconds to allow for
drivers that are missing dependencies to have some time so that
the dependency may be loaded from userland after initcalls_done
is set.
However, Yoshihiro Shimoda reported that on his device that
expects to have unmet dependencies (due to "optional links" in
its devicetree), was failing to mount the NFS root.
In digging further, it seemed the problem was that while the
device properly probes after waiting 30 seconds for any missing
modules to load, the ip_auto_config() had already failed,
resulting in NFS to fail. This was due to ip_auto_config()
calling wait_for_device_probe() which doesn't wait for the
driver_deferred_probe_timeout to fire.
This patch tries to fix the issue by creating a waitqueue
for the driver_deferred_probe_timeout, and calling wait_event()
to make sure driver_deferred_probe_timeout is zero in
wait_for_device_probe() to make sure all the probing is
finished.
The downside to this solution is that kernel functionality that
uses wait_for_device_probe(), will block until the
driver_deferred_probe_timeout fires, regardless of if there is
any missing dependencies.
However, the previous patch reverts the default timeout value to
zero, so this side-effect will only affect users who specify a
driver_deferred_probe_timeout= value as a boot argument, where
the additional delay would be beneficial to allow modules to
load later during boot.
Thanks to Geert for chasing down that ip_auto_config was why NFS
was failing in this case!
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Basil Eljuse <Basil.Eljuse@arm.com>
Cc: Ferry Toth <fntoth@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: linux-pm@vger.kernel.org
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: c8c43cee29f6 ("driver core: Fix driver_deferred_probe_check_state() logic")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200422203245.83244-4-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
warnings
In commit c8c43cee29f6 ("driver core: Fix
driver_deferred_probe_check_state() logic") and following
changes the logic was changes slightly so that if there is no
driver to match whats found in the dtb, we wait the sepcified
seconds for modules to be loaded by userland, and then timeout,
where as previously we'd print "ignoring dependency for device,
assuming no driver" and immediately return -ENODEV after
initcall_done.
However, in the timeout case (which previously existed but was
practicaly un-used without a boot argument), the timeout message
uses dev_WARN(). This means folks are now seeing a big backtrace
in their boot logs if there a entry in their dts that doesn't
have a driver.
To fix this, lets use dev_warn(), instead of dev_WARN() to match
the previous error path.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Basil Eljuse <Basil.Eljuse@arm.com>
Cc: Ferry Toth <fntoth@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: linux-pm@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: c8c43cee29f6 ("driver core: Fix driver_deferred_probe_check_state() logic")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200422203245.83244-3-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch addresses a regression in 5.7-rc1+
In commit c8c43cee29f6 ("driver core: Fix
driver_deferred_probe_check_state() logic"), we both cleaned up
the logic and also set the default driver_deferred_probe_timeout
value to 30 seconds to allow for drivers that are missing
dependencies to have some time so that the dependency may be
loaded from userland after initcalls_done is set.
However, Yoshihiro Shimoda reported that on his device that
expects to have unmet dependencies (due to "optional links" in
its devicetree), was failing to mount the NFS root.
In digging further, it seemed the problem was that while the
device properly probes after waiting 30 seconds for any missing
modules to load, the ip_auto_config() had already failed,
resulting in NFS to fail. This was due to ip_auto_config()
calling wait_for_device_probe() which doesn't wait for the
driver_deferred_probe_timeout to fire.
Fixing that issue is possible, but could also introduce 30
second delays in bootups for users who don't have any
missing dependencies, which is not ideal.
So I think the best solution to avoid any regressions is to
revert back to a default timeout value of zero, and allow
systems that need to utilize the timeout in order for userland
to load any modules that supply misisng dependencies in the dts
to specify the timeout length via the exiting documented boot
argument.
Thanks to Geert for chasing down that ip_auto_config was why NFS
was failing in this case!
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Rob Herring <robh@kernel.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Basil Eljuse <Basil.Eljuse@arm.com>
Cc: Ferry Toth <fntoth@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Anders Roxell <anders.roxell@linaro.org>
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: c8c43cee29f6 ("driver core: Fix driver_deferred_probe_check_state() logic")
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200422203245.83244-2-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a place in the code where open-coded version of list entry accessors
list_last_entry() is used.
Replace that with the standard macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200324122023.9649-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Between printing the debug message and actual check atomic counter can be
altered. For better debugging experience read atomic counter value only once.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Link: https://lore.kernel.org/r/20200324122023.9649-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since other subsystems (like regulator) have similar arbitrary
timeouts for how long they try to resolve driver dependencies,
rename deferred_probe_timeout to driver_deferred_probe_timeout
and set it as global, so it can be shared.
Cc: linux-pm@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200225050828.56458-6-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that driver_deferred_probe_check_state() works better, and
we've converted the only user of
driver_deferred_probe_check_state_continue() we can simply
remove it and simplify some of the logic.
Cc: linux-pm@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200225050828.56458-5-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
CONFIG_MODULES is set
When using modules, its common for the modules not to be loaded
until quite late by userland. With the current code,
driver_deferred_probe_check_state() will stop returning
EPROBE_DEFER after late_initcall, which can cause module
dependency resolution to fail after that.
So allow a longer window of 30 seconds (picked somewhat
arbitrarily, but influenced by the similar regulator core
timeout value) in the case where modules are enabled.
Cc: linux-pm@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200225050828.56458-3-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
driver_deferred_probe_check_state() has some uninituitive behavior.
* From boot to late_initcall, it returns -EPROBE_DEFER
* From late_initcall to the deferred_probe_timeout (if set)
it returns -ENODEV
* If the deferred_probe_timeout it set, after it fires, it
returns -ETIMEDOUT
This is a bit confusing, as its useful to have the function
return -EPROBE_DEFER while the timeout is still running. This
behavior has resulted in the somwhat duplicative
driver_deferred_probe_check_state_continue() function being
added.
Thus this patch tries to improve the logic, so that it behaves
as such:
* If late_initcall has passed, and modules are not enabled
it returns -ENODEV
* If modules are enabled and deferred_probe_timeout is set,
it returns -EPROBE_DEFER until the timeout, afterwhich it
returns -ETIMEDOUT.
* In all other cases, it returns -EPROBE_DEFER
This will make the deferred_probe_timeout value much more
functional, and will allow us to consolidate the
driver_deferred_probe_check_state() and
driver_deferred_probe_check_state_continue() logic in a later
patch.
Cc: linux-pm@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Todd Kjos <tkjos@google.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Kevin Hilman <khilman@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Link: https://lore.kernel.org/r/20200225050828.56458-2-john.stultz@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
If a device already has devres items attached before probing, a warning
backtrace is printed. However, this backtrace does not reveal the
offending device, leaving the user uninformed. Furthermore, using
WARN_ON() causes systems with panic-on-warn to reboot.
Fix this by replacing the WARN_ON() by a dev_crit() message.
Abort probing the device, to prevent doing more damage to the device's
resources.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191206132219.28908-1-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 134b23eec9e3a3c795a6ceb0efe2fa63e87983b2.
Based on a lot of email and in-person discussions, this patch series is
being reworked to address a number of issues that were pointed out that
needed to be taken care of before it should be merged. It will be
resubmitted with those changes hopefully soon.
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dev_groups added to struct driver
Persistent tag for others to pull this branch from
This is the first patch in a longer series that adds the ability for the
driver core to create and remove a list of attribute groups
automatically when the device is bound/unbound from a specific driver.
See:
https://lore.kernel.org/r/20190731124349.4474-2-gregkh@linuxfoundation.org
for details on this patch, and examples of how to use it in other
drivers.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add the ability for the driver core to create and remove a list of
attribute groups automatically when the device is bound/unbound from a
specific driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Richard Gong <richard.gong@linux.intel.com>
Link: https://lore.kernel.org/r/20190731124349.4474-2-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver core/bus adding supplier-consumer dependencies by default
enables functional dependencies to be tracked correctly even when the
consumer devices haven't had their drivers registered or loaded (if they
are modules).
However, when the bus incorrectly adds dependencies that it shouldn't
have added, the devices might never probe.
For example, if device-C is a consumer of device-S and they have
phandles to each other in DT, the following could happen:
1. Device-S get added first.
2. The bus add_links() callback will (incorrectly) try to link it as
a consumer of device-C.
3. Since device-C isn't present, device-S will be put in
"waiting-for-supplier" list.
4. Device-C gets added next.
5. All devices in "waiting-for-supplier" list are retried for linking.
6. Device-S gets linked as consumer to Device-C.
7. The bus add_links() callback will (correctly) try to link it as
a consumer of device-S.
8. This isn't allowed because it would create a cyclic device links.
Neither devices will get probed since the supplier is marked as
dependent on the consumer. And the consumer will never probe because the
consumer can't get resources from the supplier.
Without this patch, things stay in this broken state. However, with this
patch, the execution will continue like this:
9. Device-C's driver is loaded.
10. Device-C's driver removes Device-S as a consumer of Device-C.
11. Device-C's driver adds Device-C as a consumer of Device-S.
12. Device-S probes.
14. Device-C probes.
kbuild test robot reported missing documentation for device.has_edit_links
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20190731221721.187713-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Some subsystems, such as pinctrl, allow continuing to defer probe
indefinitely. This is useful for devices that depend on resources
provided by devices that are only probed after the init stage.
One example of this can be seen on Tegra, where the DPAUX hardware
contains pinmuxing controls for pins that it shares with an I2C
controller. The I2C controller is typically used for communication
with a monitor over HDMI (DDC). However, other instances of the I2C
controller are used to access system critical components, such as a
PMIC. The I2C controller driver will therefore usually be a builtin
driver, whereas the DPAUX driver is part of the display driver that
is loaded from a module to avoid bloating the kernel image with all
of the DRM/KMS subsystem.
In this particular case the pins used by this I2C/DDC controller
become accessible very late in the boot process. However, since the
controller is only used in conjunction with display, that's not an
issue.
Unfortunately the driver core currently outputs a warning message
when a device fails to get the pinctrl before the end of the init
stage. That can be confusing for the user because it may sound like
an unwanted error occurred, whereas it's really an expected and
harmless situation.
In order to eliminate this warning, this patch allows callers of the
driver_deferred_probe_check_state() helper to specify that they want
to continue deferring probe, regardless of whether we're past the
init stage or not. All of the callers of that function are updated
for the new signature, but only the pinctrl subsystem passes a true
value in the new persist parameter if appropriate.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190621151725.20414-1-thierry.reding@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In commit 376991db4b64 ("driver core: Postpone DMA tear-down until after
devres release"), we changed the ordering of tearing down the device DMA
ops and releasing all the device's resources; this was because the DMA ops
should be maintained until we release the device's managed DMA memories.
However, we have seen another crash on an arm64 system when a
device driver probe fails:
hisi_sas_v3_hw 0000:74:02.0: Adding to iommu group 2
scsi host1: hisi_sas_v3_hw
BUG: Bad page state in process swapper/0 pfn:313f5
page:ffff7e0000c4fd40 count:1 mapcount:0
mapping:0000000000000000 index:0x0
flags: 0xfffe00000001000(reserved)
raw: 0fffe00000001000 ffff7e0000c4fd48 ffff7e0000c4fd48
0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
bad because of flags: 0x1000(reserved)
Modules linked in:
CPU: 49 PID: 1 Comm: swapper/0 Not tainted
5.1.0-rc1-43081-g22d97fd-dirty #1433
Hardware name: Huawei D06/D06, BIOS Hisilicon D06 UEFI
RC0 - V1.12.01 01/29/2019
Call trace:
dump_backtrace+0x0/0x118
show_stack+0x14/0x1c
dump_stack+0xa4/0xc8
bad_page+0xe4/0x13c
free_pages_check_bad+0x4c/0xc0
__free_pages_ok+0x30c/0x340
__free_pages+0x30/0x44
__dma_direct_free_pages+0x30/0x38
dma_direct_free+0x24/0x38
dma_free_attrs+0x9c/0xd8
dmam_release+0x20/0x28
release_nodes+0x17c/0x220
devres_release_all+0x34/0x54
really_probe+0xc4/0x2c8
driver_probe_device+0x58/0xfc
device_driver_attach+0x68/0x70
__driver_attach+0x94/0xdc
bus_for_each_dev+0x5c/0xb4
driver_attach+0x20/0x28
bus_add_driver+0x14c/0x200
driver_register+0x6c/0x124
__pci_register_driver+0x48/0x50
sas_v3_pci_driver_init+0x20/0x28
do_one_initcall+0x40/0x25c
kernel_init_freeable+0x2b8/0x3c0
kernel_init+0x10/0x100
ret_from_fork+0x10/0x18
Disabling lock debugging due to kernel taint
BUG: Bad page state in process swapper/0 pfn:313f6
page:ffff7e0000c4fd80 count:1 mapcount:0
mapping:0000000000000000 index:0x0
[ 89.322983] flags: 0xfffe00000001000(reserved)
raw: 0fffe00000001000 ffff7e0000c4fd88 ffff7e0000c4fd88
0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff
0000000000000000
The crash occurs for the same reason.
In this case, on the really_probe() failure path, we are still clearing
the DMA ops prior to releasing the device's managed memories.
This patch fixes this issue by reordering the DMA ops teardown and the
call to devres_release_all() on the failure path.
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Asynchronous driver probing can help much on kernel fastboot, and
this option can provide a flexible way to optimize and quickly verify
async driver probe.
Also it will help in below cases:
* Some driver actually covers several families of HWs, some of which
could use async probing while others don't. So we can't simply
turn on the PROBE_PREFER_ASYNCHRONOUS flag in driver, but use this
cmdline option, like igb driver async patch discussed at
https://www.spinics.net/lists/netdev/msg545986.html
* For SOC (System on Chip) with multiple spi or i2c controllers, most
of the slave spi/i2c devices will be assigned with fixed controller
number, while async probing may make those controllers get different
index for each boot, which prevents those controller drivers to be
async probed. For platforms not using these spi/i2c slave devices,
they can use this cmdline option to benefit from the async probing.
Suggested-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When unbinding the (IOMMU-enabled) R-Car SATA device on Salvator-XS
(R-Car H3 ES2.0), in preparation of rebinding against vfio-platform for
device pass-through for virtualization:
echo ee300000.sata > /sys/bus/platform/drivers/sata_rcar/unbind
the kernel crashes with:
Unable to handle kernel paging request at virtual address ffffffbf029ffffc
Mem abort info:
ESR = 0x96000006
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000006
CM = 0, WnR = 0
swapper pgtable: 4k pages, 39-bit VAs, pgdp = 000000007e8c586c
[ffffffbf029ffffc] pgd=000000073bfc6003, pud=000000073bfc6003, pmd=0000000000000000
Internal error: Oops: 96000006 [#1] SMP
Modules linked in:
CPU: 0 PID: 1098 Comm: bash Not tainted 5.0.0-rc5-salvator-x-00452-g37596f884f4318ef #287
Hardware name: Renesas Salvator-X 2nd version board based on r8a7795 ES2.0+ (DT)
pstate: 60400005 (nZCv daif +PAN -UAO)
pc : __free_pages+0x8/0x58
lr : __dma_direct_free_pages+0x50/0x5c
sp : ffffff801268baa0
x29: ffffff801268baa0 x28: 0000000000000000
x27: ffffffc6f9c60bf0 x26: ffffffc6f9c60bf0
x25: ffffffc6f9c60810 x24: 0000000000000000
x23: 00000000fffff000 x22: ffffff8012145000
x21: 0000000000000800 x20: ffffffbf029fffc8
x19: 0000000000000000 x18: ffffffc6f86c42c8
x17: 0000000000000000 x16: 0000000000000070
x15: 0000000000000003 x14: 0000000000000000
x13: ffffff801103d7f8 x12: 0000000000000028
x11: ffffff8011117604 x10: 0000000000009ad8
x9 : ffffff80110126d0 x8 : ffffffc6f7563000
x7 : 6b6b6b6b6b6b6b6b x6 : 0000000000000018
x5 : ffffff8011cf3cc8 x4 : 0000000000004000
x3 : 0000000000080000 x2 : 0000000000000001
x1 : 0000000000000000 x0 : ffffffbf029fffc8
Process bash (pid: 1098, stack limit = 0x00000000c38e3e32)
Call trace:
__free_pages+0x8/0x58
__dma_direct_free_pages+0x50/0x5c
arch_dma_free+0x1c/0x98
dma_direct_free+0x14/0x24
dma_free_attrs+0x9c/0xdc
dmam_release+0x18/0x20
release_nodes+0x25c/0x28c
devres_release_all+0x48/0x4c
device_release_driver_internal+0x184/0x1f0
device_release_driver+0x14/0x1c
unbind_store+0x70/0xb8
drv_attr_store+0x24/0x34
sysfs_kf_write+0x4c/0x64
kernfs_fop_write+0x154/0x1c4
__vfs_write+0x34/0x164
vfs_write+0xb4/0x16c
ksys_write+0x5c/0xbc
__arm64_sys_write+0x14/0x1c
el0_svc_common+0x98/0x114
el0_svc_handler+0x1c/0x24
el0_svc+0x8/0xc
Code: d51b4234 17fffffa a9bf7bfd 910003fd (b9403404)
---[ end trace 8c564cdd3a1a840f ]---
While I've bisected this to commit e8e683ae9a736407 ("iommu/of: Fix
probe-deferral"), and reverting that commit on post-v5.0-rc4 kernels
does fix the problem, this turned out to be a red herring.
On arm64, arch_teardown_dma_ops() resets dev->dma_ops to NULL.
Hence if a driver has used a managed DMA allocation API, the allocated
DMA memory will be freed using the direct DMA ops, while it may have
been allocated using a custom DMA ops (iommu_dma_ops in this case).
Fix this by reversing the order of the calls to devres_release_all() and
arch_teardown_dma_ops().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new device link flag, DL_FLAG_AUTOPROBE_CONSUMER, to request the
driver core to probe for a consumer driver automatically after binding
a driver to the supplier device on a persistent managed device link.
As unbinding the supplier driver on a managed device link causes the
consumer driver to be detached from its device automatically, this
flag provides a complementary mechanism which is needed to address
some "composite device" use cases.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Call the asynchronous probe routines on a CPU local to the device node. By
doing this we should be able to improve our initialization time
significantly as we can avoid having to access the device from a remote
node which may introduce higher latency.
For example, in the case of initializing memory for NVDIMM this can have a
significant impact as initialing 3TB on remote node can take up to 39
seconds while initialing it on a local node only takes 23 seconds. It is
situations like this where we will see the biggest improvement.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Probe devices asynchronously instead of the driver. This results in us
seeing the same behavior if the device is registered before the driver or
after. This way we can avoid serializing the initialization should the
driver not be loaded until after the devices have already been added.
The motivation behind this is that if we have a set of devices that
take a significant amount of time to load we can greatly reduce the time to
load by processing them in parallel instead of one at a time. In addition,
each device can exist on a different node so placing a single thread on one
CPU to initialize all of the devices for a given driver can result in poor
performance on a system with multiple nodes.
This approach can reduce the time needed to scan SCSI LUNs significantly.
The only way to realize that speedup is by enabling more concurrency which
is what is achieved with this patch.
To achieve this it was necessary to add a new member "async_driver" to the
device_private structure to store the driver pointer while we wait on the
deferred probe call.
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Try to consolidate all of the locking and unlocking of both the parent and
device when attaching or removing a driver from a given device.
To do that I first consolidated the lock pattern into two functions
__device_driver_lock and __device_driver_unlock. After doing that I then
created functions specific to attaching and detaching the driver while
acquiring these locks. By doing this I was able to reduce the number of
spots where we touch need_parent_lock from 12 down to 4.
This patch should produce no functional changes, it is meant to be a code
clean-up/consolidation only.
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
bitflag
Add an additional bit flag to the device_private struct named "dead".
This additional flag provides a guarantee that when a device_del is
executed on a given interface an async worker will not attempt to attach
the driver following the earlier device_del call. Previously this
guarantee was not present and could result in the device_del call
attempting to remove a driver from an interface only to have the async
worker attempt to probe the driver later when it finally completes the
asynchronous probe call.
One additional change added was that I pulled the check for dev->driver
out of the __device_attach_driver call and instead placed it in the
__device_attach_async_helper call. This was motivated by the fact that the
only other caller of this, __device_attach, had already taken the
device_lock() and checked for dev->driver. Instead of testing for this
twice in this path it makes more sense to just consolidate the dev->dead
and dev->driver checks together into one set of checks.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
__device_release_driver() has to check dev->bus->need_parent_lock
before dropping the parent lock and acquiring it again as it may
attempt to drop a lock that hasn't been acquired or lock a device
that shouldn't be locked and create a lock imbalance.
Fixes: 8c97a46af04b (driver core: hold dev's parent lock when needed)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Move the async_synchronize_full call out of __device_release_driver and
into driver_detach.
The idea behind this is that the async_synchronize_full call will only
guarantee that any existing async operations are flushed. This doesn't do
anything to guarantee that a hotplug event that may occur while we are
doing the release of the driver will not be asynchronously scheduled.
By moving this into the driver_detach path we can avoid potential deadlocks
as we aren't holding the device lock at this point and we should not have
the driver we want to flush loaded so the flush will take care of any
asynchronous events the driver we are detaching might have scheduled.
Fixes: 765230b5f084 ("driver-core: add asynchronous probing support for drivers")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Correct function name and spelling/typo for device_block_probing()
in drivers/base/dd.c.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The simple_strtol() function is deprecated, use kstrtoint() instead.
Signed-off-by: Muchun Song <smuchun@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This goes through a lot of hooks just to call arch_teardown_dma_ops.
Replace it with a direct call instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
|
|
There is no good reason for this indirection given that the method
always exists.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
|
|
We need the driver core changes in here as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Commit 52cdbdd49853 (driver core: correct device's shutdown order)
introduced a regression by breaking device shutdown on some systems.
Namely, the devices_kset_move_last() call in really_probe() added by
that commit is a mistake as it may cause parents to follow children
in the devices_kset list which then causes shutdown to fail. For
example, if a device has children before really_probe() is called
for it (which is not uncommon), that call will cause it to be
reordered after the children in the devices_kset list and the
ordering of that list will not reflect the correct device shutdown
order any more.
Also it causes the devices_kset list to be constantly reordered
until all drivers have been probed which is totally pointless
overhead in the majority of cases and it only covered an issue
with system shutdown, while system-wide suspend/resume potentially
had the same issue on the affected platforms (which was not covered).
Moreover, the shutdown issue originally addressed by the change in
really_probe() made by commit 52cdbdd49853 is not present in 4.18-rc
any more, since dra7 started to use the sdhci-omap driver which
doesn't disable any regulators during shutdown, so the really_probe()
part of commit 52cdbdd49853 can be safely reverted. [The original
issue was related to the omap_hsmmc driver used by dra7 previously.]
For the above reasons, revert the really_probe() modifications made
by commit 52cdbdd49853.
The other code changes made by commit 52cdbdd49853 are useful and
they need not be reverted.
Fixes: 52cdbdd49853 (driver core: correct device's shutdown order)
Link: https://lore.kernel.org/lkml/CAFgQCTt7VfqM=UyCnvNFxrSw8Z6cUtAi3HUwR4_xPAc03SgHjQ@mail.gmail.com/
Reported-by: Pingfan Liu <kernelfans@gmail.com>
Tested-by: Pingfan Liu <kernelfans@gmail.com>
Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Deferred probe will currently wait forever on dependent devices to probe,
but sometimes a driver will never exist. It's also not always critical for
a driver to exist. Platforms can rely on default configuration from the
bootloader or reset defaults for things such as pinctrl and power domains.
This is often the case with initial platform support until various drivers
get enabled. There's at least 2 scenarios where deferred probe can render
a platform broken. Both involve using a DT which has more devices and
dependencies than the kernel supports. The 1st case is a driver may be
disabled in the kernel config. The 2nd case is the kernel version may
simply not have the dependent driver. This can happen if using a newer DT
(provided by firmware perhaps) with a stable kernel version. Deferred
probe issues can be difficult to debug especially if the console has
dependencies or userspace fails to boot to a shell.
There are also cases like IOMMUs where only built-in drivers are
supported, so deferring probe after initcalls is not needed. The IOMMU
subsystem implemented its own mechanism to handle this using OF_DECLARE
linker sections.
This commit adds makes ending deferred probe conditional on initcalls
being completed or a debug timeout. Subsystems or drivers may opt-in by
calling driver_deferred_probe_check_init_done() instead of
unconditionally returning -EPROBE_DEFER. They may use additional
information from DT or kernel's config to decide whether to continue to
defer probe or not.
The timeout mechanism is intended for debug purposes and WARNs loudly.
The remaining deferred probe pending list will also be dumped after the
timeout. Not that this timeout won't work for the console which needs
to be enabled before userspace starts. However, if the console's
dependencies are resolved, then the kernel log will be printed (as
opposed to no output).
Cc: Alexander Graf <agraf@suse.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
With Device Trees (DT), the dependencies of the devices are defined in the
DT, then the drivers parse that information to lookup the needed resources
that have as dependencies.
Since drivers and devices are registered in a non-deterministic way, it is
possible that a device that is a dependency has not been registered yet by
the time that is looked up.
In this case the driver that requires this dependency cannot probe and has
to defer it. So the driver core adds it to a list of deferred devices that
is iterated again every time that a new driver is probed successfully.
For debugging purposes it may be useful to know what are the devices whose
probe function was deferred. Add a debugfs entry showing that information.
$ cat /sys/kernel/debug/devices_deferred
48070000.i2c:twl@48:bci
musb-hdrc.0.auto
omapdrm.0
This information could be obtained partially by enabling debugging, but it
means that the kernel log has to be parsed and the probe deferral balanced
with the successes. This can be error probe and has to be done in a ad-hoc
manner by everyone who needs to debug these kind of issues.
Since the information is already known by the kernel, just show it to make
it easier to debug.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add initcall_debug logs for each driver device probe call, for example:
probe of a3800000.ramoops returned 1 after 3007 usecs
This replaces the previous code added to report times for deferred
probes. It also reports OF platform bus device creates that were
formerly lumped together in a single entry for function
of_platform_default_populate_init, as well as helping to annotate other
initcalls that involve device probing.
Remove restriction on printing probe times only during initcalls, since
initcall_debug now continues to show driver timing info past the boot
phase.
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These revert a recent PM core change that introduced a regression, fix
the build when the recently added Kryo cpufreq driver is selected, add
support for devices attached to multiple power domains to the generic
power domains (genpd) framework, add support for iowait boosting on
systens with hardware-managed P-states (HWP) enabled to the
intel_pstate driver, modify the behavior of the wakeup_count device
attribute in sysfs, fix a few issues and clean up some ugliness,
mostly in cpufreq (core and drivers) and in the cpupower utility.
Specifics:
- Revert a recent PM core change that attempted to fix an issue
related to device links, but introduced a regression (Rafael
Wysocki)
- Fix build when the recently added cpufreq driver for Kryo
processors is selected by making it possible to build that driver
as a module (Arnd Bergmann)
- Fix the long idle detection mechanism in the out-of-band (ondemand
and conservative) cpufreq governors (Chen Yu)
- Add support for devices in multiple power domains to the generic
power domains (genpd) framework (Ulf Hansson)
- Add support for iowait boosting on systems with hardware-managed
P-states (HWP) enabled to the intel_pstate driver and ma |
