summaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)Author
2020-12-01block: move the start_sect field to struct block_deviceChristoph Hellwig
Move the start_sect field to struct block_device in preparation of killing struct hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: move disk stat accounting to struct block_deviceChristoph Hellwig
Move the dkstats and stamp field to struct block_device in preparation of killing struct hd_struct. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: remove the nr_sects field in struct hd_structChristoph Hellwig
Now that the hd_struct always has a block device attached to it, there is no need for having two size field that just get out of sync. Additionally the field in hd_struct did not use proper serialization, possibly allowing for torn writes. By only using the block_device field this problem also gets fixed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Coly Li <colyli@suse.de> [bcache] Acked-by: Chao Yu <yuchao0@huawei.com> [f2fs] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: simplify bdev/disk lookup in blkdev_getChristoph Hellwig
To simplify block device lookup and a few other upcoming areas, make sure that we always have a struct block_device available for each disk and each partition, and only find existing block devices in bdget. The only downside of this is that each device and partition uses a little more memory. The upside will be that a lot of code can be simplified. With that all we need to look up the block device is to lookup the inode and do a few sanity checks on the gendisk, instead of the separate lookup for the gendisk. For blk-cgroup which wants to access a gendisk without opening it, a new blkdev_{get,put}_no_open low-level interface is added to replace the previous get_gendisk use. Note that the change to look up block device directly instead of the two step lookup using struct gendisk causes a subtile change in behavior: accessing a non-existing partition on an existing block device can now cause a call to request_module. That call is harmless, and in practice no recent system will access these nodes as they aren't created by udev and static /dev/ setups are unusual. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: remove i_bdevChristoph Hellwig
Switch the block device lookup interfaces to directly work with a dev_t so that struct block_device references are only acquired by the blkdev_get variants (and the blk-cgroup special case). This means that we now don't need an extra reference in the inode and can generally simplify handling of struct block_device to keep the lookups contained in the core block layer code. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Coly Li <colyli@suse.de> [bcache] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: use put_device in put_diskChristoph Hellwig
Use put_device to put the device instead of poking into the internals and using kobject_put. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: use disk_part_iter_exit in disk_part_iter_nextChristoph Hellwig
Call disk_part_iter_exit in disk_part_iter_next instead of duplicating the functionality. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: remove a superflous check in blkpg_do_ioctlChristoph Hellwig
sector_t is now always a u64, so this check is not needed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-01block: move blk_rq_bio_prep() to linux/blk-mq.hChaitanya Kulkarni
This is a preparation patch to have minimal block layer request bio append functionality in the context of the NVMeOF Passthru driver which falls in the fast path and doesn't need calls from blk_rq_append_bio(). Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-12-01block: use gcd() to fix chunk_sectors limit stackingMike Snitzer
commit 22ada802ede8 ("block: use lcm_not_zero() when stacking chunk_sectors") broke chunk_sectors limit stacking. chunk_sectors must reflect the most limited of all devices in the IO stack. Otherwise malformed IO may result. E.g.: prior to this fix, ->chunk_sectors = lcm_not_zero(8, 128) would result in blk_max_size_offset() splitting IO at 128 sectors rather than the required more restrictive 8 sectors. And since commit 07d098e6bbad ("block: allow 'chunk_sectors' to be non-power-of-2") care must be taken to properly stack chunk_sectors to be compatible with the possibility that a non-power-of-2 chunk_sectors may be stacked. This is why gcd() is used instead of reverting back to using min_not_zero(). Fixes: 22ada802ede8 ("block: use lcm_not_zero() when stacking chunk_sectors") Fixes: 07d098e6bbad ("block: allow 'chunk_sectors' to be non-power-of-2") Reported-by: John Dorminy <jdorminy@redhat.com> Reported-by: Bruce Johnston <bjohnsto@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: John Dorminy <jdorminy@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-30block: wbt: Remove unnecessary invoking of wbt_update_limits in wbt_initLei Chen
It's unnecessary to call wbt_update_limits explicitly within wbt_init, because it will be called in the following function wbt_queue_depth_changed. Signed-off-by: Lei Chen <lennychen@tencent.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-27Merge branch 'linus' into sched/core, to resolve semantic conflictIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2020-11-24smp: Cleanup smp_call_function*()Peter Zijlstra
Get rid of the __call_single_node union and cleanup the API a little to avoid external code relying on the structure layout as much. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
2020-11-20block/keyslot-manager: prevent crash when num_slots=1Eric Biggers
If there is only one keyslot, then blk_ksm_init() computes slot_hashtable_size=1 and log_slot_ht_size=0. This causes blk_ksm_find_keyslot() to crash later because it uses hash_ptr(key, log_slot_ht_size) to find the hash bucket containing the key, and hash_ptr() doesn't support the bits == 0 case. Fix this by making the hash table always have at least 2 buckets. Tested by running: kvm-xfstests -c ext4 -g encrypt -m inlinecrypt \ -o blk-crypto-fallback.num_keyslots=1 Fixes: 1b2628397058 ("block: Keyslot Manager for Inline Encryption") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: remove the update_bdev parameter to set_capacity_revalidate_and_notifyChristoph Hellwig
The update_bdev argument is always set to true, so remove it. Also rename the function to the slighly less verbose set_capacity_and_notify, as propagating the disk size to the block device isn't really revalidation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: fix the kerneldoc comment for __register_blkdevChristoph Hellwig
Switch the comment to talk about __register_blkdev instead of register_blkdev and document the new probe parameter. Fixes: 3da1a61e7046 ("block: add an optional probe callback to major_names") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: switch gendisk lookup to a simple xarrayChristoph Hellwig
Now that bdev_map is only used for finding gendisks, we can use a simple xarray instead of the regions tracking structure for it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: add an optional probe callback to major_namesChristoph Hellwig
Add a callback to the major_names array that allows a driver to override how to probe for dev_t that doesn't currently have a gendisk registered. This will help separating the lookup of the gendisk by dev_t vs probe action for a not currently registered dev_t. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: rework requesting modules for unclaimed devicesChristoph Hellwig
Instead of reusing the ranges in bdev_map, add a new helper that is called if no ranges was found. This is a first step to unpeel and eventually remove the complex ranges structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: split block_class_lockChristoph Hellwig
Split the block_class_lock mutex into one each to protect bdev_map and major_names. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: open code kobj_map into in block/genhd.cChristoph Hellwig
Copy and paste the kobj_map functionality in the block code in preparation for completely rewriting it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: cleanup del_gendisk a bitChristoph Hellwig
Merge three hidden gendisk checks into one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: remove __blkdev_driver_ioctlChristoph Hellwig
Just open code it in the few callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: remove set_device_roChristoph Hellwig
Fold set_device_ro into its only remaining caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: don't call into the driver for BLKROSETChristoph Hellwig
Now that all drivers that want to hook into setting or clearing the read-only flag use the set_read_only method, this code can be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: add a new set_read_only methodChristoph Hellwig
Add a new method to allow for driver-specific processing when setting or clearing the block device read-only state. This allows to replace the cumbersome and error-prone override of the whole ioctl implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-16block: don't call into the driver for BLKFLSBUFChristoph Hellwig
BLKFLSBUF is entirely contained in the block core, and there is no good reason to give the driver a hook into processing it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-14blk-cgroup: fix a hd_struct leak in blkcg_fill_root_iostatsChristoph Hellwig
disk_get_part needs to be paired with a disk_put_part. Cc: stable@vger.kernel.org Fixes: ef45fe470e1 ("blk-cgroup: show global disk stats in root cgroup io.stat") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-13block: mark flush request as IDLE when it is really finishedMing Lei
For avoiding use-after-free on flush request, we call its .end_io() from both timeout code path and __blk_mq_end_request(). When flush request's ref doesn't drop to zero, it is still used, we can't mark it as IDLE, so fix it by marking IDLE when its refcount drops to zero really. Fixes: 65ff5cd04551 ("blk-mq: mark flush request as IDLE in flush_end_io()") Signed-off-by: Ming Lei <ming.lei@redhat.com> Cc: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-12block: add a return value to set_capacity_revalidate_and_notifyChristoph Hellwig
Return if the function ended up sending an uevent or not. Cc: stable@vger.kernel.org # v5.9 Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-11-10scsi: block: Return status code in blk_mq_end_request()Hannes Reinecke
blk_mq_end_request() will use the block status returned from queue_rq() as argument, except in one instance in blk_mq_dispatch_rq_list(), where the generic BLK_STS_IOERR is used. Link: https://lore.kernel.org/r/20200930080256.90964-2-hare@suse.de Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-10-30blk-mq: mark flush request as IDLE in flush_end_io()Ming Lei
Mark flush request as IDLE in its .end_io(), aligning it with how normal requests behave. The flush request stays in in-flight tags if we're not using an IO scheduler, so we need to change its state into IDLE. Otherwise, we will hang in blk_mq_tagset_wait_completed_request() during error recovery because flush the request state is kept as COMPLETED. Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Cc: Chao Leng <lengchao@huawei.com> Cc: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-28block: advance iov_iter on bio_add_hw_page failureNaohiro Aota
When the bio's size reaches max_append_sectors, bio_add_hw_page returns 0 then __bio_iov_append_get_pages returns -EINVAL. This is an expected result of building a small enough bio not to be split in the IO path. However, iov_iter is not advanced in this case, causing the same pages are filled for the bio again and again. Fix the case by properly advancing the iov_iter for already processed pages. Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND") Cc: stable@vger.kernel.org # 5.8+ Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-26blk-cgroup: Pre-allocate tree node on blkg_conf_prepGabriel Krisman Bertazi
Similarly to commit 457e490f2b741 ("blkcg: allocate struct blkcg_gq outside request queue spinlock"), blkg_create can also trigger occasional -ENOMEM failures at the radix insertion because any allocation inside blkg_create has to be non-blocking, making it more likely to fail. This causes trouble for userspace tools trying to configure io weights who need to deal with this condition. This patch reduces the occurrence of -ENOMEMs on this path by preloading the radix tree element on a GFP_KERNEL context, such that we guarantee the later non-blocking insertion won't fail. A similar solution exists in blkcg_init_queue for the same situation. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-26blk-cgroup: Fix memleak on error pathGabriel Krisman Bertazi
If new_blkg allocation raced with blk_policy change and blkg_lookup_check fails, new_blkg is leaked. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-24Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" - lightnvm out-of-bounds fix (Colin) - SG allocation leak fix (Doug) - rnbd fixes (Gioh, Guoqing, Jack) - zone error translation fixes (Keith) - kerneldoc markup fix (Mauro) - zram lockdep fix (Peter) - Kill unused io_context members (Yufen) - NUMA memory allocation cleanup (Xianting) - NBD config wakeup fix (Xiubo) * tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits) block: blk-mq: fix a kernel-doc markup nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O null_blk: use zone status for max active/open nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected block: remove unused members for io_context blk-mq: remove the calling of local_memory_node() zram: Fix __zram_bvec_{read,write}() locking order skd_main: remove unused including <linux/version.h> sgl_alloc_order: fix memory leak lightnvm: fix out-of-bounds write to array devices->info[] ...
2020-10-23block: blk-mq: fix a kernel-doc markupMauro Carvalho Chehab
Fix a typo: blk_mq_run_hw_queue -> blk_mq_run_hw_queues Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-20blk-mq: remove the calling of local_memory_node()Xianting Tian
We don't need to check whether the node is memoryless numa node before calling allocator interface. SLUB(and SLAB,SLOB) relies on the page allocator to pick a node. Page allocator should deal with memoryless nodes just fine. It has zonelists constructed for each possible nodes. And it will automatically fall back into a node which is closest to the requested node. As long as __GFP_THISNODE is not enforced of course. The code comments of kmem_cache_alloc_node() of SLAB also showed this: * Fallback to other node is possible if __GFP_THISNODE is not set. blk-mq code doesn't set __GFP_THISNODE, so we can remove the calling of local_memory_node(). Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-15docs: bio: fix a kerneldoc markupMauro Carvalho Chehab
Fix this warning: ./block/bio.c:1098: WARNING: Inline emphasis start-string without end-string. The thing is that *iter is not a valid markup. That seems to be a typo: *iter -> @iter Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-15block: bio: fix a warning at the kernel-doc markupsMauro Carvalho Chehab
Using "@bio's parent" causes the following waring: ./block/bio.c:10: WARNING: Inline emphasis start-string without end-string. The main problem here is that this would be converted into: **bio**'s parent By kernel-doc, which is not a valid notation. It would be possible to use, instead, this kernel-doc markup: ``bio's`` parent Yet, here, is probably simpler to just use an altenative language: the parent of @bio Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-10-14Merge tag 'for-5.10/dm-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - Improve DM core's bio splitting to use blk_max_size_offset(). Also fix bio splitting for bios that were deferred to the worker thread due to a DM device being suspended. - Remove DM core's special handling of NVMe devices now that block core has internalized efficiencies drivers previously needed to be concerned about (via now removed direct_make_request). - Fix request-based DM to not bounce through indirect dm_submit_bio; instead have block core make direct call to blk_mq_submit_bio(). - Various DM core cleanups to simplify and improve code. - Update DM cryot to not use drivers that set CRYPTO_ALG_ALLOCATES_MEMORY. - Fix DM raid's raid1 and raid10 discard limits for the purposes of linux-stable. But then remove DM raid's discard limits settings now that MD raid can efficiently handle large discards. - A couple small cleanups across various targets. * tag 'for-5.10/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix request-based DM to not bounce through indirect dm_submit_bio dm: remove special-casing of bio-based immutable singleton target on NVMe dm: export dm_copy_name_and_uuid dm: fix comment in __dm_suspend() dm: fold dm_process_bio() into dm_submit_bio() dm: fix missing imposition of queue_limits from dm_wq_work() thread dm snap persistent: simplify area_io() dm thin metadata: Remove unused local variable when create thin and snap dm raid: remove unnecessary discard limits for raid10 dm raid: fix discard limits for raid1 and raid10 dm crypt: don't use drivers that have CRYPTO_ALG_ALLOCATES_MEMORY dm: use dm_table_get_device_name() where appropriate in targets dm table: make 'struct dm_table' definition accessible to all of DM core dm: eliminate need for start_io_acct() forward declaration dm: simplify __process_abnormal_io() dm: push use of on-stack flush_bio down to __send_empty_flush() dm: optimize max_io_len() by inlining max_io_len_target_boundary() dm: push md->immutable_target optimization down to __process_bio() dm: change max_io_len() to use blk_max_size_offset() dm table: stack 'chunk_sectors' limit to account for target-specific splitting
2020-10-13block: add zone specific block statusesKeith Busch
A zoned device with limited resources to open or activate zones may return an error when the host exceeds those limits. The same command may be successful if retried later, but the host needs to wait for specific zone states before it should expect a retry to succeed. Have the block layer provide an appropriate status for these conditions so applications can distinuguish this error for special handling. Cc: linux-api@vger.kernel.org Cc: Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-13Merge tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block driver updates from Jens Axboe: "Here are the driver updates for 5.10. A few SCSI updates in here too, in coordination with Martin as they depend on core block changes for the shared tag bitmap. This contains: - NVMe pull requests via Christoph: - fix keep alive timer modification (Amit Engel) - order the PCI ID list more sensibly (Andy Shevchenko) - cleanup the open by controller helper (Chaitanya Kulkarni) - use an xarray for the CSE log lookup (Chaitanya Kulkarni) - support ZNS in nvmet passthrough mode (Chaitanya Kulkarni) - fix nvme_ns_report_zones (Christoph Hellwig) - add a sanity check to nvmet-fc (James Smart) - fix interrupt allocation when too many polled queues are specified (Jeffle Xu) - small nvmet-tcp optimization (Mark Wunderlich) - fix a controller refcount leak on init failure (Chaitanya Kulkarni) - misc cleanups (Chaitanya Kulkarni) - major refactoring of the scanning code (Christoph Hellwig) - MD updates via Song: - Bug fixes in bitmap code, from Zhao Heming - Fix a work queue check, from Guoqing Jiang - Fix raid5 oops with reshape, from Song Liu - Clean up unused code, from Jason Yan - Discard improvements, from Xiao Ni - raid5/6 page offset support, from Yufen Yu - Shared tag bitmap for SCSI/hisi_sas/null_blk (John, Kashyap, Hannes) - null_blk open/active zone limit support (Niklas) - Set of bcache updates (Coly, Dongsheng, Qinglang)" * tag 'drivers-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (78 commits) md/raid5: fix oops during stripe resizing md/bitmap: fix memory leak of temporary bitmap md: fix the checking of wrong work queue md/bitmap: md_bitmap_get_counter returns wrong blocks md/bitmap: md_bitmap_read_sb uses wrong bitmap blocks md/raid0: remove unused function is_io_in_chunk_boundary() nvme-core: remove extra condition for vwc nvme-core: remove extra variable nvme: remove nvme_identify_ns_list nvme: refactor nvme_validate_ns nvme: move nvme_validate_ns nvme: query namespace identifiers before adding the namespace nvme: revalidate zone bitmaps in nvme_update_ns_info nvme: remove nvme_update_formats nvme: update the known admin effects nvme: set the queue limits in nvme_update_ns_info nvme: remove the 0 lba_shift check in nvme_update_ns_info nvme: clean up the check for too large logic block sizes nvme: freeze the queue over ->lba_shift updates nvme: factor out a nvme_configure_metadata helper ...
2020-10-13Merge tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-blockLinus Torvalds
Pull block updates from Jens Axboe: - Series of merge handling cleanups (Baolin, Christoph) - Series of blk-throttle fixes and cleanups (Baolin) - Series cleaning up BDI, seperating the block device from the backing_dev_info (Christoph) - Removal of bdget() as a generic API (Christoph) - Removal of blkdev_get() as a generic API (Christoph) - Cleanup of is-partition checks (Christoph) - Series reworking disk revalidation (Christoph) - Series cleaning up bio flags (Christoph) - bio crypt fixes (Eric) - IO stats inflight tweak (Gabriel) - blk-mq tags fixes (Hannes) - Buffer invalidation fixes (Jan) - Allow soft limits for zone append (Johannes) - Shared tag set improvements (John, Kashyap) - Allow IOPRIO_CLASS_RT for CAP_SYS_NICE (Khazhismel) - DM no-wait support (Mike, Konstantin) - Request allocation improvements (Ming) - Allow md/dm/bcache to use IO stat helpers (Song) - Series improving blk-iocost (Tejun) - Various cleanups (Geert, Damien, Danny, Julia, Tetsuo, Tian, Wang, Xianting, Yang, Yufen, yangerkun) * tag 'block-5.10-2020-10-12' of git://git.kernel.dk/linux-block: (191 commits) block: fix uapi blkzoned.h comments blk-mq: move cancel of hctx->run_work to the front of blk_exit_queue blk-mq: get rid of the dead flush handle code path block: get rid of unnecessary local variable block: fix comment and add lockdep assert blk-mq: use helper function to test hw stopped block: use helper function to test queue register block: remove redundant mq check block: invoke blk_mq_exit_sched no matter whether have .exit_sched percpu_ref: don't refer to ref->data if it isn't allocated block: ratelimit handle_bad_sector() message blk-throttle: Re-use the throtl_set_slice_end() blk-throttle: Open code __throtl_de/enqueue_tg() blk-throttle: Move service tree validation out of the throtl_rb_first() blk-throttle: Move the list operation after list validation blk-throttle: Fix IO hang for a corner case blk-throttle: Avoid tracking latency if low limit is invalid blk-throttle: Avoid getting the current time if tg->last_finish_time is 0 blk-throttle: Remove a meaningless parameter for throtl_downgrade_state() block: Remove redundant 'return' statement ...
2020-10-12Merge branch 'work.iov_iter' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull compat iovec cleanups from Al Viro: "Christoph's series around import_iovec() and compat variant thereof" * 'work.iov_iter' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: security/keys: remove compat_keyctl_instantiate_key_iov mm: remove compat_process_vm_{readv,writev} fs: remove compat_sys_vmsplice fs: remove the compat readv/writev syscalls fs: remove various compat readv/writev helpers iov_iter: transparently handle compat iovecs in import_iovec iov_iter: refactor rw_copy_check_uvector and import_iovec iov_iter: move rw_copy_check_uvector() into lib/iov_iter.c compat.h: fix a spelling error in <linux/compat.h>
2020-10-09blk-mq: move cancel of hctx->run_work to the front of blk_exit_queueYang Yang
blk_exit_queue will free elevator_data, while blk_mq_run_work_fn will access it. Move cancel of hctx->run_work to the front of blk_exit_queue to avoid use-after-free. Fixes: 1b97871b501f ("blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release") Signed-off-by: Yang Yang <yang.yang@vivo.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09blk-mq: get rid of the dead flush handle code pathYufen Yu
After commit 923218f6166a ("blk-mq: don't allocate driver tag upfront for flush rq"), blk_mq_submit_bio() will call blk_insert_flush() directly to handle flush request rather than blk_mq_sched_insert_request() in the case of elevator. Then, all flush request either have set RQF_FLUSH_SEQ flag when call blk_mq_sched_insert_request(), or have inserted into hctx->dispatch. So, remove the dead code path. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: get rid of unnecessary local variableYufen Yu
Since whole elevator register is protectd by sysfs_lock, we don't need extras 'has_elevator'. Just use q->elevator directly. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09block: fix comment and add lockdep assertYufen Yu
After commit b89f625e28d4 ("block: don't release queue's sysfs lock during switching elevator"), whole elevator register and unregister function are covered by sysfs_lock. So, remove wrong comment and add lockdep assert. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-10-09blk-mq: use helper function to test hw stoppedYufen Yu
We have introduced helper function blk_mq_hctx_stopped() to test BLK_MQ_S_STOPPED. Signed-off-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-13 20:44:14 +0000