Age | Commit message (Collapse) | Author |
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A defconfig fix (Daniel Díaz)
- Disable relocation relaxation for the compressed kernel when not
built as -pie as in that case kernels built with clang and linked
with LLD fail to boot due to the linker optimizing some instructions
in non-PIE form; the gory details in the commit message (Arvind
Sankar)
- A fix for the "bad bp value" warning issued by the frame-pointer
unwinder (Josh Poimboeuf)
* tag 'x86_urgent_for_v5.9_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/fp: Fix FP unwinding in ret_from_fork
x86/boot/compressed: Disable relocation relaxation
x86/defconfigs: Explicitly unset CONFIG_64BIT in i386_defconfig
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a lockdep issue to avoid an asserting triggering during
early boot. There shouldn't be any incorrect behavior as the system
isn't concurrent at the time.
- The addition of a missing fence when installing early fixmap
mappings.
- A corretion to the K210 device tree's interrupt map.
- A fix for M-mode timer handling on the K210.
* tag 'riscv-for-linus-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Resurrect the MMIO timer implementation for M-mode systems
riscv: Fix Kendryte K210 device tree
riscv: Add sfence.vma after early page table changes
RISC-V: Take text_mutex in ftrace_init_nop()
|
|
The K210 doesn't implement rdtime in M-mode, and since that's where Linux runs
in the NOMMU systems that means we can't use rdtime. The K210 is the only
system that anyone is currently running NOMMU or M-mode on, so here we're just
inlining the timer read directly.
This also adds the CLINT driver as an !MMU dependency, as it's currently the
only timer driver availiable for these systems and without it we get a build
failure for some configurations.
Tested-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The Kendryte K210 SoC CLINT is compatible with Sifive clint v0
(sifive,clint0). Fix the Kendryte K210 device tree clint entry to be
inline with the sifive timer definition documented in
Documentation/devicetree/bindings/timer/sifive,clint.yaml.
The device tree clint entry is renamed similarly to u-boot device tree
definition to improve compatibility with u-boot defined device tree.
To ensure correct initialization, the interrup-cells attribute is added
and the interrupt-extended attribute definition fixed.
This fixes boot failures with Kendryte K210 SoC boards.
Note that the clock referenced is kept as K210_CLK_ACLK, which does not
necessarilly match the clint MTIME increment rate. This however does not
seem to cause any problem for now.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
This invalidates local TLB after modifying the page tables during early init as
it's too early to handle suprious faults as we otherwise do.
Fixes: f2c17aabc917 ("RISC-V: Implement compile-time fixed mappings")
Reported-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Syven Wang <syven.wang@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
[Palmer: Cleaned up the commit text]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix order in trace_hardirqs_off_caller() to make locking state
consistent even if the IRQ tracer calls into lockdep again. Touches
common code. Acked-by Peter Zijlstra.
- Correctly handle secure storage violation exception to avoid kernel
panic triggered by user space misbehaviour.
- Switch the idle->seqcount over to using raw_write_*() to avoid
"suspicious RCU usage".
- Fix memory leaks on hard unplug in pci code.
- Use kvmalloc instead of kmalloc for larger allocations in zcrypt.
- Add few missing __init annotations to static functions to avoid
section mismatch complains when functions are not inlined.
* tag 's390-5.9-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: add 3f program exception handler
lockdep: fix order in trace_hardirqs_off_caller()
s390/pci: fix leak of DMA tables on hard unplug
s390/init: add missing __init annotations
s390/zcrypt: fix kmalloc 256k failure
s390/idle: fix suspicious RCU usage
|
|
Pull arch/sh fixes from Rich Felker:
"Fixes for build and function regression"
* tag 'sh-for-5.9-part2' of git://git.libc.org/linux-sh:
sh: fix syscall tracing
sh: remove spurious circular inclusion from asm/smp.h
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Allow CPUs affected by erratum 1418040 to come online late
(previously we only fixed the other case - CPUs not affected by the
erratum coming up late).
- Fix branch offset in BPF JIT.
- Defer the stolen time initialisation to the CPU online time from the
CPU starting time to avoid a (sleep-able) memory allocation in an
atomic context.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: paravirt: Initialize steal time when cpu is online
arm64: bpf: Fix branch offset in JIT
arm64: Allow CPUs unffected by ARM erratum 1418040 to come in late
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.9:
- Opt us out of the DEBUG_VM_PGTABLE support for now as it's causing
crashes.
- Fix a long standing bug in our DMA mask handling that was hidden
until recently, and which caused problems with some drivers.
- Fix a boot failure on systems with large amounts of RAM, and no
hugepage support and using Radix MMU, only seen in the lab.
- A few other minor fixes.
Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Gautham R. Shenoy,
Hari Bathini, Ira Weiny, Nick Desaulniers, Shirisha Ganta, Vaibhav
Jain, and Vaidyanathan Srinivasan"
* tag 'powerpc-5.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/papr_scm: Limit the readability of 'perf_stats' sysfs attribute
cpuidle: pseries: Fix CEDE latency conversion from tb to us
powerpc/dma: Fix dma_map_ops::get_required_mask
Revert "powerpc/build: vdso linker warning for orphan sections"
powerpc/mm: Remove DEBUG_VM_PGTABLE support on powerpc
selftests/powerpc: Skip PROT_SAO test in guests/LPARS
powerpc/book3s64/radix: Fix boot failure with large amount of guest memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new CPU ID to the RAPL power capping driver and prevent
the ACPI processor idle driver from triggering RCU-lockdep complaints.
Specifics:
- Add support for the Lakefield chip to the RAPL power capping driver
(Ricardo Neri).
- Modify the ACPI processor idle driver to prevent it from triggering
RCU-lockdep complaints which has started to happen after recent
changes in that area (Peter Zijlstra)"
* tag 'pm-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Take over RCU-idle for C3-BM idle
cpuidle: Allow cpuidle drivers to take over RCU-idle
ACPI: processor: Use CPUIDLE_FLAG_TLB_FLUSHED
ACPI: processor: Use CPUIDLE_FLAG_TIMER_STOP
powercap: RAPL: Add support for Lakefield
|
|
There have been some reports of "bad bp value" warnings printed by the
frame pointer unwinder:
WARNING: kernel stack regs at 000000005bac7112 in sh:1014 has bad 'bp' value 0000000000000000
This warning happens when unwinding from an interrupt in
ret_from_fork(). If entry code gets interrupted, the state of the
frame pointer (rbp) may be undefined, which can confuse the unwinder,
resulting in warnings like the above.
There's an in_entry_code() check which normally silences such
warnings for entry code. But in this case, ret_from_fork() is getting
interrupted. It recently got moved out of .entry.text, so the
in_entry_code() check no longer works.
It could be moved back into .entry.text, but that would break the
noinstr validation because of the call to schedule_tail().
Instead, initialize each new task's RBP to point to the task's entry
regs via an encoded frame pointer. That will allow the unwinder to
reach the end of the stack gracefully.
Fixes: b9f6976bfb94 ("x86/entry/64: Move non entry code into .text section")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/f366bbf5a8d02e2318ee312f738112d0af74d16f.1600103007.git.jpoimboe@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
"Two small fixes for SNI machines"
* tag 'mips_fixes_5.9_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: SNI: Fix spurious interrupts
MIPS: SNI: Fix MIPS_L1_CACHE_SHIFT
|
|
Steal time initialization requires mapping a memory region which
invokes a memory allocation. Doing this at CPU starting time results
in the following trace when CONFIG_DEBUG_ATOMIC_SLEEP is enabled:
BUG: sleeping function called from invalid context at mm/slab.h:498
in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/1
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0-rc5+ #1
Call trace:
dump_backtrace+0x0/0x208
show_stack+0x1c/0x28
dump_stack+0xc4/0x11c
___might_sleep+0xf8/0x130
__might_sleep+0x58/0x90
slab_pre_alloc_hook.constprop.101+0xd0/0x118
kmem_cache_alloc_node_trace+0x84/0x270
__get_vm_area_node+0x88/0x210
get_vm_area_caller+0x38/0x40
__ioremap_caller+0x70/0xf8
ioremap_cache+0x78/0xb0
memremap+0x9c/0x1a8
init_stolen_time_cpu+0x54/0xf0
cpuhp_invoke_callback+0xa8/0x720
notify_cpu_starting+0xc8/0xd8
secondary_start_kernel+0x114/0x180
CPU1: Booted secondary processor 0x0000000001 [0x431f0a11]
However we don't need to initialize steal time at CPU starting time.
We can simply wait until CPU online time, just sacrificing a bit of
accuracy by returning zero for steal time until we know better.
While at it, add __init to the functions that are only called by
pv_time_init() which is __init.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Fixes: e0685fa228fd ("arm64: Retrieve stolen time as paravirtualized guest")
Cc: stable@vger.kernel.org
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20200916154530.40809-1-drjones@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Running the eBPF test_verifier leads to random errors looking like this:
[ 6525.735488] Unexpected kernel BRK exception at EL1
[ 6525.735502] Internal error: ptrace BRK handler: f2000100 [#1] SMP
[ 6525.741609] Modules linked in: nls_utf8 cifs libdes libarc4 dns_resolver fscache binfmt_misc nls_ascii nls_cp437 vfat fat aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul efi_pstore sha2_ce sha256_arm64 sha1_ce evdev efivars efivarfs ip_tables x_tables autofs4 btrfs blake2b_generic xor xor_neon zstd_compress raid6_pq libcrc32c crc32c_generic ahci xhci_pci libahci xhci_hcd igb libata i2c_algo_bit nvme realtek usbcore nvme_core scsi_mod t10_pi netsec mdio_devres of_mdio gpio_keys fixed_phy libphy gpio_mb86s7x
[ 6525.787760] CPU: 3 PID: 7881 Comm: test_verifier Tainted: G W 5.9.0-rc1+ #47
[ 6525.796111] Hardware name: Socionext SynQuacer E-series DeveloperBox, BIOS build #1 Jun 6 2020
[ 6525.804812] pstate: 20000005 (nzCv daif -PAN -UAO BTYPE=--)
[ 6525.810390] pc : bpf_prog_c3d01833289b6311_F+0xc8/0x9f4
[ 6525.815613] lr : bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c
[ 6525.820832] sp : ffff8000130cbb80
[ 6525.824141] x29: ffff8000130cbbb0 x28: 0000000000000000
[ 6525.829451] x27: 000005ef6fcbf39b x26: 0000000000000000
[ 6525.834759] x25: ffff8000130cbb80 x24: ffff800011dc7038
[ 6525.840067] x23: ffff8000130cbd00 x22: ffff0008f624d080
[ 6525.845375] x21: 0000000000000001 x20: ffff800011dc7000
[ 6525.850682] x19: 0000000000000000 x18: 0000000000000000
[ 6525.855990] x17: 0000000000000000 x16: 0000000000000000
[ 6525.861298] x15: 0000000000000000 x14: 0000000000000000
[ 6525.866606] x13: 0000000000000000 x12: 0000000000000000
[ 6525.871913] x11: 0000000000000001 x10: ffff8000000a660c
[ 6525.877220] x9 : ffff800010951810 x8 : ffff8000130cbc38
[ 6525.882528] x7 : 0000000000000000 x6 : 0000009864cfa881
[ 6525.887836] x5 : 00ffffffffffffff x4 : 002880ba1a0b3e9f
[ 6525.893144] x3 : 0000000000000018 x2 : ffff8000000a4374
[ 6525.898452] x1 : 000000000000000a x0 : 0000000000000009
[ 6525.903760] Call trace:
[ 6525.906202] bpf_prog_c3d01833289b6311_F+0xc8/0x9f4
[ 6525.911076] bpf_prog_d53bb52e3f4483f9_F+0x38/0xc8c
[ 6525.915957] bpf_dispatcher_xdp_func+0x14/0x20
[ 6525.920398] bpf_test_run+0x70/0x1b0
[ 6525.923969] bpf_prog_test_run_xdp+0xec/0x190
[ 6525.928326] __do_sys_bpf+0xc88/0x1b28
[ 6525.932072] __arm64_sys_bpf+0x24/0x30
[ 6525.935820] el0_svc_common.constprop.0+0x70/0x168
[ 6525.940607] do_el0_svc+0x28/0x88
[ 6525.943920] el0_sync_handler+0x88/0x190
[ 6525.947838] el0_sync+0x140/0x180
[ 6525.951154] Code: d4202000 d4202000 d4202000 d4202000 (d4202000)
[ 6525.957249] ---[ end trace cecc3f93b14927e2 ]---
The reason is the offset[] creation and later usage, while building
the eBPF body. The code currently omits the first instruction, since
build_insn() will increase our ctx->idx before saving it.
That was fine up until bounded eBPF loops were introduced. After that
introduction, offset[0] must be the offset of the end of prologue which
is the start of the 1st insn while, offset[n] holds the
offset of the end of n-th insn.
When "taken loop with back jump to 1st insn" test runs, it will
eventually call bpf2a64_offset(-1, 2, ctx). Since negative indexing is
permitted, the current outcome depends on the value stored in
ctx->offset[-1], which has nothing to do with our array.
If the value happens to be 0 the tests will work. If not this error
triggers.
commit 7c2e988f400e ("bpf: fix x64 JIT code generation for jmp to 1st insn")
fixed an indentical bug on x86 when eBPF bounded loops were introduced.
So let's fix it by creating the ctx->offset[] differently. Track the
beginning of instruction and account for the extra instruction while
calculating the arm instruction offsets.
Fixes: 2589726d12a1 ("bpf: introduce bounded loops")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Jiri Olsa <jolsa@kernel.org>
Co-developed-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Co-developed-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200917084925.177348-1-ilias.apalodimas@linaro.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
On A20R machines the interrupt pending bits in cause register need to be
updated by requesting the chipset to do it. This needs to be done to
find the interrupt cause and after interrupt service. In
commit 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions") the
function to do after service update got lost, which caused spurious
interrupts.
Fixes: 0b888c7f3a03 ("MIPS: SNI: Convert to new irq_chip functions")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Make acpi_processor_idle() use the generic TLB flushing code.
This again removes RCU usage after rcu_idle_enter().
(XXX make every C3 invalidate TLBs, not just C3-BM)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>") forgot
to select the correct MIPS_L1_CACHE_SHIFT for SNI RM. This breaks non
coherent DMA because of a wrong allocation alignment.
Fixes: 930beb5ac09a ("MIPS: introduce MIPS_L1_CACHE_SHIFT_<N>")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
Yunhai Zhang recently fixed a VGA software scrollback bug in commit
ebfdfeeae8c0 ("vgacon: Fix for missing check in scrollback handling"),
but that then made people look more closely at some of this code, and
there were more problems on the vgacon side, but also the fbcon software
scrollback.
We don't really have anybody who maintains this code - probably because
nobody actually _uses_ it any more. Sure, people still use both VGA and
the framebuffer consoles, but they are no longer the main user
interfaces to the kernel, and haven't been for decades, so these kinds
of extra features end up bitrotting and not really being used.
So rather than try to maintain a likely unused set of code, I'll just
aggressively remove it, and see if anybody even notices. Maybe there
are people who haven't jumped on the whole GUI badnwagon yet, and think
it's just a fad. And maybe those people use the scrollback code.
If that turns out to be the case, we can resurrect this again, once
we've found the sucker^Wmaintainer for it who actually uses it.
Reported-by: NopNop Nop <nopitydays@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Cc: 张云海 <zhangyunhai@nsfocus.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The x86-64 psABI [0] specifies special relocation types
(R_X86_64_[REX_]GOTPCRELX) for indirection through the Global Offset
Table, semantically equivalent to R_X86_64_GOTPCREL, which the linker
can take advantage of for optimization (relaxation) at link time. This
is supported by LLD and binutils versions 2.26 onwards.
The compressed kernel is position-independent code, however, when using
LLD or binutils versions before 2.27, it must be linked without the -pie
option. In this case, the linker may optimize certain instructions into
a non-position-independent form, by converting foo@GOTPCREL(%rip) to $foo.
This potential issue has been present with LLD and binutils-2.26 for a
long time, but it has never manifested itself before now:
- LLD and binutils-2.26 only relax
movq foo@GOTPCREL(%rip), %reg
to
leaq foo(%rip), %reg
which is still position-independent, rather than
mov $foo, %reg
which is permitted by the psABI when -pie is not enabled.
- GCC happens to only generate GOTPCREL relocations on mov instructions.
- CLang does generate GOTPCREL relocations on non-mov instructions, but
when building the compressed kernel, it uses its integrated assembler
(due to the redefinition of KBUILD_CFLAGS dropping -no-integrated-as),
which has so far defaulted to not generating the GOTPCRELX
relocations.
Nick Desaulniers reports [1,2]:
"A recent change [3] to a default value of configuration variable
(ENABLE_X86_RELAX_RELOCATIONS OFF -> ON) in LLVM now causes Clang's
integrated assembler to emit R_X86_64_GOTPCRELX/R_X86_64_REX_GOTPCRELX
relocations. LLD will relax instructions with these relocations based
on whether the image is being linked as position independent or not.
When not, then LLD will relax these instructions to use absolute
addressing mode (R_RELAX_GOT_PC_NOPIC). This causes kernels built with
Clang and linked with LLD to fail to boot."
Patch series [4] is a solution to allow the compressed kernel to be
linked with -pie unconditionally, but even if merged is unlikely to be
backported. As a simple solution that can be applied to stable as well,
prevent the assembler from generating the relaxed relocation types using
the -mrelax-relocations=no option. For ease of backporting, do this
unconditionally.
[0] https://gitlab.com/x86-psABIs/x86-64-ABI/-/blob/master/x86-64-ABI/linker-optimization.tex#L65
[1] https://lore.kernel.org/lkml/20200807194100.3570838-1-ndesaulniers@google.com/
[2] https://github.com/ClangBuiltLinux/linux/issues/1121
[3] https://reviews.llvm.org/rGc41a18cf61790fc898dcda1055c3efbf442c14c0
[4] https://lore.kernel.org/lkml/20200731202738.2577854-1-nivedita@alum.mit.edu/
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200812004308.1448603-1-nivedita@alum.mit.edu
|
|
Program exception 3f (secure storage violation) can only be detected
when the CPU is running in SIE with a format 4 state description,
e.g. running a protected guest. Because of this and because user
space partly controls the guest memory mapping and can trigger this
exception, we want to send a SIGSEGV to the process running the guest
and not panic the kernel.
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Cc: <stable@vger.kernel.org> # 5.7
Fixes: 084ea4d611a3 ("s390/mm: add (non)secure page access exceptions handlers")
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
commit f606b3ef47c9 ("s390/pci: adapt events for zbus") removed the
zpci_disable_device() call for a zPCI event with PEC 0x0304 because
the device is already deconfigured by the platform.
This however skips the Linux side of the disable in particular it leads
to leaking the DMA tables and bitmaps because zpci_dma_exit_device() is
never called on the device.
If the device transitions to the Reserved state we call zpci_zdev_put()
but zpci_release_device() will not call zpci_disable_device() because
the state of the zPCI function is already ZPCI_FN_STATE_STANDBY.
If the device is put into the Standby state, zpci_disable_device() is
not called and the device is assumed to have been put in Standby through
platform action.
At this point the device may be removed by a subsequent event with PEC
0x0308 or 0x0306 which calls zpci_zdev_put() with the same problem
as above or the device may be configured again in which case
zpci_disable_device() is also not called.
Fix this by calling zpci_disable_device() explicitly for PEC 0x0304 as
before. To make it more clear that zpci_disable_device() may be called,
even if the lower level device has already been disabled by the
platform, add a comment to zpci_disable_device().
Cc: <stable@vger.kernel.org> # 5.8
Fixes: f606b3ef47c9 ("s390/pci: adapt events for zbus")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem.
Sometimes these functions are not inlined, and then the build
complains about section mismatch.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
After commit eb1f00237aca ("lockdep,trace: Expose tracepoints") the
lock tracepoints are visible to lockdep and RCU-lockdep is finding a
bunch more RCU violations that were previously hidden.
Switch the idle->seqcount over to using raw_write_*() to avoid the
lockdep annotation and thus the lock tracepoints.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
|
|
Addition of SECCOMP_FILTER exposed a longstanding bug in
do_syscall_trace_enter, whereby r0 (the 5th argument register) was
mistakenly used where r3 (syscall_nr) was intended. By overwriting r0
rather than r3 with -1 when attempting to block a syscall, the
existing code would instead have caused the syscall to execute with an
argument clobbered.
Commit 0bb605c2c7f2b4b3 then introduced skipping of the syscall when
do_syscall_trace_enter returns -1, so that the return value set by
seccomp filters would not be clobbered by -ENOSYS. This eliminated the
clobbering of the 5th argument register, but instead caused syscalls
made with a 5th argument of -1 to be misinterpreted as a request by
do_syscall_trace_enter to suppress the syscall.
Fixes: 0bb605c2c7f2b4b3 ("sh: Add SECCOMP_FILTER")
Fixes: ab99c733ae73cce3 ("sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME.")
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
|
|
Commit 0cd39f4600ed4de8 added inclusion of smp.h to lockdep.h,
creating a circular include dependency where arch/sh's asm/smp.h in
turn includes spinlock.h which depends on lockdep.h. Since our
asm/smp.h does not actually need spinlock.h, just remove it.
Fixes: 0cd39f4600ed4de8 ("locking/seqlock, headers: Untangle the spaghetti monster")
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: Rich Felker <dalias@libc.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A collection of fixes I've been accruing over the last few weeks, none
of them have been severe enough to warrant flushing the queue but it's
been long enough now that it's a good idea to send them in.
A handful of them are fixups for QSPI DT/bindings/compatibles, some
smaller fixes for system DMA clock control and TMU interrupts on i.MX,
a handful of fixes for OMAP, including a fix for DSI (display) on
omap5"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
arm64: dts: ns2: Fixed QSPI compatible string
ARM: dts: BCM5301X: Fixed QSPI compatible string
ARM: dts: NSP: Fixed QSPI compatible string
ARM: dts: bcm: HR2: Fixed QSPI compatible string
dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
arm64: dts: imx8mp: correct sdma1 clk setting
arm64: dts: imx8mq: Fix TMU interrupt property
ARM: dts: imx7d-zii-rmu2: fix rgmii phy-mode for ksz9031 phy
ARM: dts: vfxxx: Add syscon compatible with OCOTP
ARM: dts: imx6q-logicpd: Fix broken PWM
arm64: dts: imx: Add missing imx8mm-beacon-kit.dtb to build
ARM: dts: imx6q-prtwd2: Remove unneeded i2c unit name
ARM: dts: imx6qdl-gw51xx: Remove unneeded #address-cells/#size-cells
ARM: dts: imx7ulp: Correct gpio ranges
ARM: dts: ls1021a: fix QuadSPI-memory reg range
arm64: defconfig: Enable ptn5150 extcon driver
arm64: defconfig: Enable USB gadget with configfs
ARM: configs: Update Integrator defconfig
ARM: dts: omap5: Fix DSI base address and clocks
...
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.9, please pull the following:
- Florian fixes the Broadcom QSPI controller binding such that the most
specific compatible string is the left most one, and all existing
in-tree users are updated as well.
* tag 'arm-soc/for-5.9/devicetree-fixes' of https://github.com/Broadcom/stblinux:
arm64: dts: ns2: Fixed QSPI compatible string
ARM: dts: BCM5301X: Fixed QSPI compatible string
ARM: dts: NSP: Fixed QSPI compatible string
ARM: dts: bcm: HR2: Fixed QSPI compatible string
dt-bindings: spi: Fix spi-bcm-qspi compatible ordering
Link: https://lore.kernel.org/r/20200909211857.4144718-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.9, round 2:
- Fix the misspelling of 'interrupts' property in i.MX8MQ TMU DT node.
- Correct 'ahb' clock for i.MX8MP SDMA1 in device tree.
- Fix pad QSPI1B_SCLK mux mode for UART3 on i.MX6SX.
* tag 'imx-fixes-5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6sx: fix the pad QSPI1B_SCLK mux mode for uart3
arm64: dts: imx8mp: correct sdma1 clk setting
arm64: dts: imx8mq: Fix TMU interrupt property
Link: https://lore.kernel.org/r/20200909143844.GA25109@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.9-rc cycle
Few fixes for omap based devices:
- Fix of_clk_get() error handling for omap-iommu
- Fix missing audio pinctrl entries for logicpd boards
- Fix video for logicpd-som-lv after switch to generic panels
- Fix omap5 DSI clocks base
* tag 'omap-for-v5.9/fixes-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap5: Fix DSI base address and clocks
ARM: dts: logicpd-som-lv-baseboard: Fix missing video
ARM: dts: logicpd-som-lv-baseboard: Fix broken audio
ARM: dts: logicpd-torpedo-baseboard: Fix broken audio
ARM: OMAP2+: Fix an IS_ERR() vs NULL check in _get_pwrdm()
Link: https://lore.kernel.org/r/pull-1599132064-54898@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull kvm fixes from Paolo Bonzini:
"A bit on the bigger side, mostly due to me being on vacation, then
busy, then on parental leave, but there's nothing worrisome.
ARM:
- Multiple stolen time fixes, with a new capability to match x86
- Fix for hugetlbfs mappings when PUD and PMD are the same level
- Fix for hugetlbfs mappings when PTE mappings are enforced (dirty
logging, for example)
- Fix tracing output of 64bit values
x86:
- nSVM state restore fixes
- Async page fault fixes
- Lots of small fixes everywhere"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: emulator: more strict rsm checks.
KVM: nSVM: more strict SMM checks when returning to nested guest
SVM: nSVM: setup nested msr permission bitmap on nested state load
SVM: nSVM: correctly restore GIF on vmexit from nesting after migration
x86/kvm: don't forget to ACK async PF IRQ
x86/kvm: properly use DEFINE_IDTENTRY_SYSVEC() macro
KVM: VMX: Don't freeze guest when event delivery causes an APIC-access exit
KVM: SVM: avoid emulation with stale next_rip
KVM: x86: always allow writing '0' to MSR_KVM_ASYNC_PF_EN
KVM: SVM: Periodically schedule when unregistering regions on destroy
KVM: MIPS: Change the definition of kvm type
kvm x86/mmu: use KVM_REQ_MMU_SYNC to sync when needed
KVM: nVMX: Fix the update value of nested load IA32_PERF_GLOBAL_CTRL control
KVM: fix memory leak in kvm_io_bus_unregister_dev()
KVM: Check the allocation of pv cpu mask
KVM: nVMX: Update VMCS02 when L2 PAE PDPTE updates detected
KVM: arm64: Update page shift if stage 2 block mapping not supported
KVM: arm64: Fix address truncation in traces
KVM: arm64: Do not try to map PUDs when they are folded into PMD
arm64/x86: KVM: Introduce steal-time cap
...
|
|
Now that we allow CPUs affected by erratum 1418040 to come in late,
this prevents their unaffected sibblings from coming in late (or
coming back after a suspend or hotplug-off, which amounts to the
same thing).
To allow this, we need to add ARM64_CPUCAP_OPTIONAL_FOR_LATE_CPU,
which amounts to set .type to ARM64_CPUCAP_WEAK_LOCAL_CPU_FEATURE.
Fixes: bf87bb0881d0 ("arm64: Allow booting of late CPUs affected by erratum 1418040")
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200911181611.2073183-1-maz@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Pull OpenRISC fixes from Stafford Horne:
"Fixes for compile issues pointed out by kbuild and one bug I found in
initrd with the 5.9 patches"
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Fix issue with get_user for 64-bit values
openrisc: Fix cache API compile issue when not inlining
openrisc: Reserve memblock for initrd
|
|
Don't ignore return values in rsm_load_state_64/32 to avoid
loading invalid state from SMM state area if it was tampered with
by the guest.
This is primarly intended to avoid letting guest set bits in EFER
(like EFER.SVME when nesting is disabled) by manipulating SMM save area.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827171145.374620-8-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
* check that guest is 64 bit guest, otherwise the SVM related fields
in the smm state area are not defined
* If the SMM area indicates that SMM interrupted a running guest,
check that EFER.SVME which is also saved in this area is set, otherwise
the guest might have tampered with SMM save area, and so indicate
emulation failure which should triple fault the guest.
* Check that that guest CPUID supports SVM (due to the same issue as above)
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-4-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This code was missing and was forcing the L2 run with L1's msr
permission bitmap
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-3-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently code in svm_set_nested_state copies the current vmcb control
area to L1 control area (hsave->control), under assumption that
it mostly reflects the defaults that kvm choose, and later qemu
overrides these defaults with L2 state using standard KVM interfaces,
like KVM_SET_REGS.
However nested GIF (which is AMD specific thing) is by default is true,
and it is copied to hsave area as such.
This alone is not a big deal since on VMexit, GIF is always set to false,
regardless of what it was on VM entry. However in nested_svm_vmexit we
were first were setting GIF to false, but then we overwrite the control
fields with value from the hsave area. (including the nested GIF field
itself if GIF virtualization is enabled).
Now on normal vm entry this is not a problem, since GIF is usually false
prior to normal vm entry, and this is the value that copied to hsave,
and then restored, but this is not always the case when the nested state
is loaded as explained above.
To fix this issue, move svm_set_gif after we restore the L1 control
state in nested_svm_vmexit, so that even with wrong GIF in the
saved L1 control area, we still clear GIF as the spec says.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20200827162720.278690-2-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A build failure was raised by kbuild with the following error.
drivers/android/binder.c: Assembler messages:
drivers/android/binder.c:3861: Error: unrecognized keyword/register name `l.lwz ?ap,4(r24)'
drivers/android/binder.c:3866: Error: unrecognized keyword/register name `l.addi ?ap,r0,0'
The issue is with 64-bit get_user() calls on openrisc. I traced this to
a problem where in the internally in the get_user macros there is a cast
to long __gu_val this causes GCC to think the get_user call is 32-bit.
This binder code is really long and GCC allocates register r30, which
triggers the issue. The 64-bit get_user asm tries to get the 64-bit pair
register, which for r30 overflows the general register names and returns
the dummy register ?ap.
The fix here is to move the temporary variables into the asm macros. We
use a 32-bit __gu_tmp for 32-bit and smaller macro and a 64-bit tmp in
the 64-bit macro. The cast in the 64-bit macro has a trick of casting
through __typeof__((x)-(x)) which avoids the below warning. This was
barrowed from riscv.
arch/openrisc/include/asm/uaccess.h:240:8: warning: cast to pointer from integer of different size
I tested this in a small unit test to check reading between 64-bit and
32-bit pointers to 64-bit and 32-bit values in all combinations. Also I
ran make C=1 to confirm no new sparse warnings came up. It all looks
clean to me.
Link: https://lore.kernel.org/lkml/202008200453.ohnhqkjQ%25lkp@intel.com/
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
|
|
Merge commit 26d05b368a5c0 ("Merge branch 'kvm-async-pf-int' into HEAD")
tried to adapt the new interrupt based async PF mechanism to the newly
introduced IDTENTRY magic but unfortunately it missed the fact that
DEFINE_IDTENTRY_SYSVEC() doesn't call ack_APIC_irq() on its own and
all DEFINE_IDTENTRY_SYSVEC() users have to call it manually.
As the result all multi-CPU KVM guest hang on boot when
KVM_FEATURE_ASYNC_PF_INT is present. The breakage went unnoticed because no
KVM userspace (e.g. QEMU) currently set it (and thus async PF mechanism
is currently disabled) but we're about to change that.
Fixes: 26d05b368a5c0 ("Merge branch 'kvm-async-pf-int' into HEAD")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908135350.355053-3-vkuznets@redhat.com>
Tested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
DEFINE_IDTENTRY_SYSVEC() already contains irqentry_enter()/
irqentry_exit().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200908135350.355053-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
According to SDM 27.2.4, Event delivery causes an APIC-access VM exit.
Don't report internal error and freeze guest when event delivery causes
an APIC-access exit, it is handleable and the event will be re-injected
during the next vmentry.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1597827327-25055-2-git-send-email-wanpengli@tencent.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
svm->next_rip is reset in svm_vcpu_run() only after calling
svm_exit_handlers_fastpath(), which will cause SVM's
skip_emulated_instruction() to write a stale RIP.
We can move svm_exit_handlers_fastpath towards the end of
svm_vcpu_run(). To align VMX with SVM, keep svm_complete_interrupts()
close as well.
Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Paul K. <kronenpj@kronenpj.dyndns.org>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
[Also move vmcb_mark_all_clean before any possible write to the VMCB.
- Paolo]
|
|
Without this we get lockdep failures. They're spurious failures as SMP isn't
up when ftrace_init_nop() is called. As far as I can tell the easiest fix is
to just take the lock, which also seems like the safest fix.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
Even without in-kernel LAPIC we should allow writing '0' to
MSR_KVM_ASYNC_PF_EN as we're not enabling the mechanism. In
particular, QEMU with 'kernel-irqchip=off' fails to start
a guest with
qemu-system-x86_64: error: failed to set MSR 0x4b564d02 to 0x0
Fixes: 9d3c447c72fb2 ("KVM: X86: Fix async pf caused null-ptr-deref")
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200911093147.484565-1-vkuznets@redhat.com>
[Actually commit the version proposed by Sean Christopherson. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There may be many encrypted regions that need to be unregistered when a
SEV VM is destroyed. This can lead to soft lockups. For example, on a
host running 4.15:
watchdog: BUG: soft lockup - CPU#206 stuck for 11s! [t_virtual_machi:194348]
CPU: 206 PID: 194348 Comm: t_virtual_machi
RIP: 0010:free_unref_page_list+0x105/0x170
...
Call Trace:
[<0>] release_pages+0x159/0x3d0
[<0>] sev_unpin_memory+0x2c/0x50 [kvm_amd]
[<0>] __unregister_enc_region_locked+0x2f/0x70 [kvm_amd]
[<0>] svm_vm_destroy+0xa9/0x200 [kvm_amd]
[<0>] kvm_arch_destroy_vm+0x47/0x200
[<0>] kvm_put_kvm+0x1a8/0x2f0
[<0>] kvm_vm_release+0x25/0x30
[<0>] do_exit+0x335/0xc10
[<0>] do_group_exit+0x3f/0xa0
[<0>] get_signal+0x1bc/0x670
[<0>] do_signal+0x31/0x130
Although the CLFLUSH is no longer issued on every encrypted region to be
unregistered, there are no other changes that can prevent soft lockups for
very large SEV VMs in the latest kernel.
Periodically schedule if necessary. This still holds kvm->lock across the
resched, but since this only happens when the VM is destroyed this is
assumed to be acceptable.
Signed-off-by: David Rientjes <rientjes@google.com>
Message-Id: <alpine.DEB.2.23.453.2008251255240.2987727@chino.kir.corp.google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
MIPS defines two kvm types:
#define KVM_VM_MIPS_TE 0
#define KVM_VM_MIPS_VZ 1
In Documentation/virt/kvm/api.rst it is said that "You probably want to
use 0 as machine type", which implies that type 0 be the "automatic" or
"default" type. And, in user-space libvirt use the null-machine (with
type 0) to detect the kvm capability, which returns "KVM not supported"
on a VZ platform.
I try to fix it in QEMU but it is ugly:
https://lists.nongnu.org/archive/html/qemu-devel/2020-08/msg05629.html
And Thomas Huth suggests me to change the definition of kvm type:
https://lists.nongnu.org/archive/html/qemu-devel/2020-09/msg03281.html
So I define like this:
#define KVM_VM_MIPS_AUTO 0
#define KVM_VM_MIPS_VZ 1
#define KVM_VM_MIPS_TE 2
Since VZ and TE cannot co-exists, using type 0 on a TE platform will
still return success (so old user-space tools have no problems on new
kernels); the advantage is that using type 0 on a VZ platform will not
return failure. So, the only problem is "new user-space tools use type
2 on old kernels", but if we treat this as a kernel bug, we can backport
this patch to old stable kernels.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1599734031-28746-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When kvm_mmu_get_page() gets a page with unsynced children, the spt
pagetable is unsynchronized with the guest pagetable. But the
guest might not issue a "flush" operation on it when the pagetable
entry is changed from zero or other cases. The hypervisor has the
responsibility to synchronize the pagetables.
KVM behaved as above for many years, But commit 8c8560b83390
("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes")
inadvertently included a line of code to change it without giving any
reason in the changelog. It is clear that the commit's intention was to
change KVM_REQ_TLB_FLUSH -> KVM_REQ_TLB_FLUSH_CURRENT, so we don't
needlessly flush other contexts; however, one of the hunks changed
a nearby KVM_REQ_MMU_SYNC instead. This patch changes it back.
Link: https://lore.kernel.org/lkml/20200320212833.3507-26-sean.j.christopherson@intel.com/
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Message-Id: <20200902135421.31158-1-jiangshanlai@gmail.com>
fixes: 8c8560b83390 ("KVM: x86/mmu: Use KVM_REQ_TLB_FLUSH_CURRENT for MMU specific flushes")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A minor fix for the update of VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL field
in exit_ctls_high.
Fixes: 03a8871add95 ("KVM: nVMX: Expose load IA32_PERF_GLOBAL_CTRL
VM-{Entry,Exit} control")
Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Message-Id: <20200828085622.8365-5-chenyi.qiang@intel.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
check the allocation of per-cpu __pv_cpu_mask. Initialize ops only when
successful.
Signed-off-by: Haiwei Li <lihaiwei@tencent.com>
Message-Id: <d59f05df-e6d3-3d31-a036-cc25a2b2f33f@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When L2 uses PAE, L0 intercepts of L2 writes to CR0/CR3/CR4 call
load |