Age | Commit message (Collapse) | Author |
|
This patch adds the necessary MDIO interface node
to the Qualcomm IPQ4019 DTSI.
Built-in QCA8337N switch is managed using it,
and since we have a driver for it lets add it.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Misc fixes:
- an uclamp accounting fix
- three frequency invariance fixes and a readability improvement"
* tag 'sched-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix reset-on-fork from RT with uclamp
x86, sched: Move check for CPU type to caller function
x86, sched: Don't enable static key when starting secondary CPUs
x86, sched: Account for CPUs with less than 4 cores in freq. invariance
x86, sched: Bail out of frequency invariance if base frequency is unknown
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Two changes:
- fix exit event records
- extend x86 PMU driver enumeration to add Intel Jasper Lake CPU
support"
* tag 'perf-urgent-2020-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: fix parent pid/tid in task exit events
perf/x86/cstate: Add Jasper Lake CPU support
|
|
Pull networking fixes from David Miller:
1) Fix memory leak in netfilter flowtable, from Roi Dayan.
2) Ref-count leaks in netrom and tipc, from Xiyu Yang.
3) Fix warning when mptcp socket is never accepted before close, from
Florian Westphal.
4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.
5) Fix large delays during PTP synchornization in cxgb4, from Rahul
Lakkireddy.
6) team_mode_get() can hang, from Taehee Yoo.
7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
from Niklas Schnelle.
8) Fix handling of bpf XADD on BTF memory, from Jann Horn.
9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.
10) Missing queue memory release in iwlwifi pcie code, from Johannes
Berg.
11) Fix NULL deref in macvlan device event, from Taehee Yoo.
12) Initialize lan87xx phy correctly, from Yuiko Oshino.
13) Fix looping between VRF and XFRM lookups, from David Ahern.
14) etf packet scheduler assumes all sockets are full sockets, which is
not necessarily true. From Eric Dumazet.
15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.
16) fib_select_default() needs to handle nexthop objects, from David
Ahern.
17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.
18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.
19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.
20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
from Luke Nelson.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
selftests/bpf: Fix a couple of broken test_btf cases
tools/runqslower: Ensure own vmlinux.h is picked up first
bpf: Make bpf_link_fops static
bpftool: Respect the -d option in struct_ops cmd
selftests/bpf: Add test for freplace program with expected_attach_type
bpf: Propagate expected_attach_type when verifying freplace programs
bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
bpf, x86_32: Fix logic error in BPF_LDX zero-extension
bpf, x86_32: Fix clobbering of dst for BPF_JSET
bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
bpf: Fix reStructuredText markup
net: systemport: suppress warnings on failed Rx SKB allocations
net: bcmgenet: suppress warnings on failed Rx SKB allocations
macsec: avoid to set wrong mtu
mac80211: sta_info: Add lockdep condition for RCU list usage
mac80211: populate debugfs only after cfg80211 init
net: bcmgenet: correct per TX/RX ring statistics
net: meth: remove spurious copyright text
net: phy: bcm84881: clear settings on link down
chcr: Fix CPU hard lockup
...
|
|
When verifier_zext is true, we don't need to emit code
for zero-extension.
Fixes: 836256bf5f37 ("x32: bpf: eliminate zero extension code-gen")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423050637.GA4029@udknight
|
|
The current JIT clobbers the destination register for BPF_JSET BPF_X
and BPF_K by using "and" and "or" instructions. This is fine when the
destination register is a temporary loaded from a register stored on
the stack but not otherwise.
This patch fixes the problem (for both BPF_K and BPF_X) by always loading
the destination register into temporaries since BPF_JSET should not
modify the destination register.
This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way.
Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.com
|
|
The current JIT uses the following sequence to zero-extend into the
upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W},
when the destination register is not on the stack:
EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);
The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte
immediate; the current code emits only 1 byte of the immediate. This
means that the first 3 bytes of the next instruction will be treated as
the rest of the immediate, breaking the stream of instructions.
This patch fixes the problem by instead emitting "xor dst_hi,dst_hi"
to clear the upper 32 bits. This fixes the problem and is more efficient
than using MOV to load a zero immediate.
This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way, and the verifier implements a zero-extension optimization. But the
JIT should avoid emitting incorrect encodings regardless.
Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-1-luke.r.nels@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Ensure context synchronisation after a write to APIAKey.
- Fix bullet list formatting in Documentation/arm64/amu.rst to
eliminate doc warnings.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Documentation: arm64: fix amu.rst doc warnings
arm64: sync kernel APIAKey when installing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix scripts/config to properly handle ':' in string type CONFIG
options
- fix unneeded rebuilds of DT schema check rule
- git rid of ordering dependency between <linux/vermagic.h> and
<linux/module.h> to fix build errors in some network drivers
- clean up generated headers of host arch with 'make ARCH=um mrproper'
* tag 'kbuild-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
h8300: ignore vmlinux.lds
Documentation: kbuild: fix the section title format
um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/
arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h>
kbuild: fix DT binding schema rule again to avoid needless rebuilds
scripts/config: allow colons in option strings for sed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I
found after restarting my randconfig build testing that had been
dormant for a while.
On the Nokia N950/N9 phone, a DT fix is required to address a boot
regression.
For the bcm283x (Raspberry Pi), two DT fixes address minor issues"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: imx8: select SOC_BUS
soc: tegra: fix tegra_pmc_get_suspend_mode definition
soc: fsl: dpio: avoid stack usage warning
soc: fsl: dpio: fix incorrect pointer conversions
ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y
ARM: dts: bcm283x: Disable dsi0 node
firmware: xilinx: make firmware_debugfs_root static
drivers: soc: xilinx: fix firmware driver Kconfig dependency
ARM: dts: bcm283x: Add cells encoding format to firmware bus
ARM: dts: OMAP3: disable RNG on N950/N9
|
|
https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.7, please pull the following:
- Nicolas provides a fix for 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's
firmware bus DMA limitations") which missed adding proper
#address-cells and #size-cells properties and he also disables the DSI
node which should have been disabled by default but was not.
* tag 'arm-soc/for-5.7/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Disable dsi0 node
ARM: dts: bcm283x: Add cells encoding format to firmware bus
Link: https://lore.kernel.org/r/20200417171725.1084-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
In this workflow:
$ make ARCH=um defconfig && make ARCH=um -j8
[snip]
$ make ARCH=um mrproper
[snip]
$ make ARCH=um defconfig O=./build_um && make ARCH=um -j8 O=./build_um
[snip]
CC scripts/mod/empty.o
In file included from ../include/linux/types.h:6,
from ../include/linux/mod_devicetable.h:12,
from ../scripts/mod/devicetable-offsets.c:3:
../include/uapi/linux/types.h:5:10: fatal error: asm/types.h: No such file or directory
5 | #include <asm/types.h>
| ^~~~~~~~~~~~~
compilation terminated.
make[2]: *** [../scripts/Makefile.build:100: scripts/mod/devicetable-offsets.s] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [/home/iha/sdb/opensource/lkmp/linux-kselftest.git/Makefile:1140: prepare0] Error 2
make[1]: Leaving directory '/home/iha/sdb/opensource/lkmp/linux-kselftest.git/build_um'
make: *** [Makefile:180: sub-make] Error 2
The cause of the error was because arch/$(SUBARCH)/include/generated files
weren't properly cleaned by `make ARCH=um mrproper`.
Fixes: a788b2ed81ab ("kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build")
Reported-by: Theodore Ts'o <tytso@mit.edu>
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Vitor Massaru Iha <vitor@massaru.org>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: Brendan Higgins <brendanhiggins@google.com>
Link: https://groups.google.com/forum/#!msg/kunit-dev/QmA27YEgEgI/hvS1kiz2CwAJ
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
As the bug report [1] pointed out, <linux/vermagic.h> must be included
after <linux/module.h>.
I believe we should not impose any include order restriction. We often
sort include directives alphabetically, but it is just coding style
convention. Technically, we can include header files in any order by
making every header self-contained.
Currently, arch-specific MODULE_ARCH_VERMAGIC is defined in
<asm/module.h>, which is not included from <linux/vermagic.h>.
Hence, the straight-forward fix-up would be as follows:
|--- a/include/linux/vermagic.h
|+++ b/include/linux/vermagic.h
|@@ -1,5 +1,6 @@
| /* SPDX-License-Identifier: GPL-2.0 */
| #include <generated/utsrelease.h>
|+#include <linux/module.h>
|
| /* Simply sanity version stamp for modules. */
| #ifdef CONFIG_SMP
This works enough, but for further cleanups, I split MODULE_ARCH_VERMAGIC
definitions into <asm/vermagic.h>.
With this, <linux/module.h> and <linux/vermagic.h> will be orthogonal,
and the location of MODULE_ARCH_VERMAGIC definitions will be consistent.
For arc and ia64, MODULE_PROC_FAMILY is only used for defining
MODULE_ARCH_VERMAGIC. I squashed it.
For hexagon, nds32, and xtensa, I removed <asm/modules.h> entirely
because they contained nothing but MODULE_ARCH_VERMAGIC definition.
Kbuild will automatically generate <asm/modules.h> at build-time,
wrapping <asm-generic/module.h>.
[1] https://lore.kernel.org/lkml/20200411155623.GA22175@zn.tnic
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
|
|
Improve readability of the function intel_set_max_freq_ratio() by moving
the check for KNL CPUs there, together with checks for GLM and SKX.
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200416054745.740-5-ggherdovich@suse.cz
|
|
The static key arch_scale_freq_key only needs to be enabled once (at
boot). This change fixes a bug by which the key was enabled every time cpu0
is started, even as a secondary CPU during cpu hotplug. Secondary CPUs are
started from the idle thread: setting a static key from there means
acquiring a lock and may result in sleeping in the idle task, causing CPU
lockup.
Another consequence of this change is that init_counter_refs() is now
called on each CPU correctly; previously the function on_each_cpu() was
used, but it was called at boot when the only online cpu is cpu0.
[ggherdovich@suse.cz: Tested and wrote changelog]
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200416054745.740-4-ggherdovich@suse.cz
|
|
If a CPU has less than 4 physical cores, MSR_TURBO_RATIO_LIMIT will
rightfully report that the 4C turbo ratio is zero. In such cases, use the
1C turbo ratio instead for frequency invariance calculations.
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Reported-by: Like Xu <like.xu@linux.intel.com>
Reported-by: Neil Rickert <nwr10cst-oslnx@yahoo.com>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Link: https://lkml.kernel.org/r/20200416054745.740-3-ggherdovich@suse.cz
|
|
Some hypervisors such as VMWare ESXi 5.5 advertise support for
X86_FEATURE_APERFMPERF but then fill all MSR's with zeroes. In particular,
MSR_PLATFORM_INFO set to zero tricks the code that wants to know the base
clock frequency of the CPU (highest non-turbo frequency), producing a
division by zero when computing the ratio turbo_freq/base_freq necessary
for frequency invariant accounting.
It is to be noted that even if MSR_PLATFORM_INFO contained the appropriate
data, APERF and MPERF are constantly zero on ESXi 5.5, thus freq-invariance
couldn't be done in principle (not that it would make a lot of sense in a
VM anyway). The real problem is advertising X86_FEATURE_APERFMPERF. This
appears to be fixed in more recent versions: ESXi 6.7 doesn't advertise
that feature.
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200416054745.740-2-ggherdovich@suse.cz
|
|
The Jasper Lake processor is Tremont microarchitecture, reuse the
glm_cstates table of Goldmont and Goldmont Plus to enable the C-states
residency profiling.
Signed-off-by: Harry Pan <harry.pan@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200402190658.1.Ic02e891daac41303aed1f2fc6c64f6110edd27bd@changeid
|
|
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
tools/vm: fix cross-compile build
coredump: fix null pointer dereference on coredump
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path
shmem: fix possible deadlocks on shmlock_user_lock
vmalloc: fix remap_vmalloc_range() bounds checks
mm/shmem: fix build without THP
mm/ksm: fix NULL pointer dereference when KSM zero page is enabled
tools/build: tweak unused value workaround
checkpatch: fix a typo in the regex for $allocFunctions
mm, gup: return EINTR when gup is interrupted by fatal signals
mm/hugetlb: fix a addressing exception caused by huge_pte_offset
MAINTAINERS: add an entry for kfifo
mm/userfaultfd: disable userfaultfd-wp on x86_32
slub: avoid redzone when choosing freepointer location
sh: fix build error in mm/init.c
|
|
Userfaultfd-wp is not yet working on 32bit hosts, but it's accidentally
enabled previously. Disable it.
Fixes: 5a281062af1d ("userfaultfd: wp: add WP pagetable tracking to x86")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Link: http://lkml.kernel.org/r/20200413141608.109211-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The closing parenthesis is missing.
Fixes: bfeb022f8fe4 ("mm/memory_hotplug: add pgprot_t to mhp_params")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Link: http://lkml.kernel.org/r/20200413014743.16353-1-masahiroy@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A direct write to a APxxKey_EL1 register requires a context
synchronization event to ensure that indirect reads made by subsequent
instructions (e.g. AUTIASP, PACIASP) observe the new value.
When we initialize the boot task's APIAKey in boot_init_stack_canary()
via ptrauth_keys_switch_kernel() we miss the necessary ISB, and so there
is a window where instructions are not guaranteed to use the new APIAKey
value. This has been observed to result in boot-time crashes where
PACIASP and AUTIASP within a function used a mixture of the old and new
key values.
Fix this by having ptrauth_keys_switch_kernel() synchronize the new key
value with an ISB. At the same time, __ptrauth_key_install() is renamed
to __ptrauth_key_install_nosync() so that it is obvious that this
performs no synchronization itself.
Fixes: 28321582334c261c ("arm64: initialize ptrauth keys for kernel booting task")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Will Deacon <will@kernel.org>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Will Deacon <will@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master
PPC KVM fix for 5.7
- Fix a regression introduced in the last merge window, which results
in guests in HPT mode dying randomly.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master
KVM: s390: Fix for 5.7 and maintainer update
- Silence false positive lockdep warning
- add Claudio as reviewer
|
|
This patch fixes an encoding bug in emit_stx for BPF_B when the source
register is BPF_REG_FP.
The current implementation for BPF_STX BPF_B in emit_stx saves one REX
byte when the operands can be encoded using Mod-R/M alone. The lower 8
bits of registers %rax, %rbx, %rcx, and %rdx can be accessed without using
a REX prefix via %al, %bl, %cl, and %dl, respectively. Other registers,
(e.g., %rsi, %rdi, %rbp, %rsp) require a REX prefix to use their 8-bit
equivalents (%sil, %dil, %bpl, %spl).
The current code checks if the source for BPF_STX BPF_B is BPF_REG_1
or BPF_REG_2 (which map to %rdi and %rsi), in which case it emits the
required REX prefix. However, it misses the case when the source is
BPF_REG_FP (mapped to %rbp).
The result is that BPF_STX BPF_B with BPF_REG_FP as the source operand
will read from register %ch instead of the correct %bpl. This patch fixes
the problem by fixing and refactoring the check on which registers need
the extra REX byte. Since no BPF registers map to %rsp, there is no need
to handle %spl.
Fixes: 622582786c9e0 ("net: filter: x86: internal BPF JIT")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200418232655.23870-1-luke.r.nels@gmail.com
|
|
Since cd758a9b57ee "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT
page fault handler", it's been possible in fairly rare circumstances to
load a non-present PTE in kvmppc_book3s_hv_page_fault() when running a
guest on a POWER8 host.
Because that case wasn't checked for, we could misinterpret the non-present
PTE as being a cache-inhibited PTE. That could mismatch with the
corresponding hash PTE, which would cause the function to fail with -EFAULT
a little further down. That would propagate up to the KVM_RUN ioctl()
generally causing the KVM userspace (usually qemu) to fall over.
This addresses the problem by catching that case and returning to the guest
instead.
For completeness, this fixes the radix page fault handler in the same
way. For radix this didn't cause any obvious misbehaviour, because we
ended up putting the non-present PTE into the guest's partition-scoped
page tables, leading immediately to another hypervisor data/instruction
storage interrupt, which would go through the page fault path again
and fix things up.
Fixes: cd758a9b57ee "KVM: PPC: Book3S HV: Use __gfn_to_pfn_memslot in HPT page fault handler"
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1820402
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
|
|
Frame pointers are completely broken by vmenter.S because it clobbers
RBP:
arch/x86/kvm/svm/vmenter.o: warning: objtool: __svm_vcpu_run()+0xe4: BP used as a scratch register
That's unavoidable, so just skip checking that file when frame pointers
are configured in.
On the other hand, ORC can handle that code just fine, so leave objtool
enabled in the !FRAME_POINTER case.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Message-Id: <01fae42917bacad18be8d2cbc771353da6603473.1587398610.git.jpoimboe@redhat.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Fixes: 199cd1d7b534 ("KVM: SVM: Split svm_vcpu_run inline assembly to separate file")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Boot regression fix for N950/N9
We need to tag RNG as disabled for N950/N9 as it blocked by the secure
mode. We have a similar change done for N900, but I missed adding it
for N950/N9 with the recent RNG changes.
* tag 'omap-for-v5.6/fixes-rc7-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: OMAP3: disable RNG on N950/N9
Link: https://lore.kernel.org/r/pull-1585340588-558327@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The diag 0x44 handler, which handles a directed yield, goes into a
a codepath that does a kvm_for_each_vcpu() and ultimately
deliverable_irqs(). The new check for kvm_s390_pv_cpu_is_protected()
contains an assertion that the vcpu->mutex is held, which isn't going
to be the case in this scenario.
The result is a plethora of these messages if the lock debugging
is enabled, and thus an implication that we have a problem.
WARNING: CPU: 9 PID: 16167 at arch/s390/kvm/kvm-s390.h:239 deliverable_irqs+0x1c6/0x1d0 [kvm]
...snip...
Call Trace:
[<000003ff80429bf2>] deliverable_irqs+0x1ca/0x1d0 [kvm]
([<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm])
[<000003ff8042ba82>] kvm_s390_vcpu_has_irq+0x2a/0xa8 [kvm]
[<000003ff804101e2>] kvm_arch_dy_runnable+0x22/0x38 [kvm]
[<000003ff80410284>] kvm_vcpu_on_spin+0x8c/0x1d0 [kvm]
[<000003ff80436888>] kvm_s390_handle_diag+0x3b0/0x768 [kvm]
[<000003ff80425af4>] kvm_handle_sie_intercept+0x1cc/0xcd0 [kvm]
[<000003ff80422bb0>] __vcpu_run+0x7b8/0xfd0 [kvm]
[<000003ff80423de6>] kvm_arch_vcpu_ioctl_run+0xee/0x3e0 [kvm]
[<000003ff8040ccd8>] kvm_vcpu_ioctl+0x2c8/0x8d0 [kvm]
[<00000001504ced06>] ksys_ioctl+0xae/0xe8
[<00000001504cedaa>] __s390x_sys_ioctl+0x2a/0x38
[<0000000150cb9034>] system_call+0xd8/0x2d8
2 locks held by CPU 2/KVM/16167:
#0: 00000001951980c0 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x90/0x8d0 [kvm]
#1: 000000019599c0f0 (&kvm->srcu){....}, at: __vcpu_run+0x4bc/0xfd0 [kvm]
Last Breaking-Event-Address:
[<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm]
irq event stamp: 11967
hardirqs last enabled at (11975): [<00000001502992f2>] console_unlock+0x4ca/0x650
hardirqs last disabled at (11982): [<0000000150298ee8>] console_unlock+0xc0/0x650
softirqs last enabled at (7940): [<0000000150cba6ca>] __do_softirq+0x422/0x4d8
softirqs last disabled at (7929): [<00000001501cd688>] do_softirq_own_stack+0x70/0x80
Considering what's being done here, let's fix this by removing the
mutex assertion rather than acquiring the mutex for every other vcpu.
Fixes: 201ae986ead7 ("KVM: s390: protvirt: Implement interrupt injection")
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Link: https://lore.kernel.org/r/20200415190353.63625-1-farman@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 and objtool fixes from Thomas Gleixner:
"A set of fixes for x86 and objtool:
objtool:
- Ignore the double UD2 which is emitted in BUG() when
CONFIG_UBSAN_TRAP is enabled.
- Support clang non-section symbols in objtool ORC dump
- Fix switch table detection in .text.unlikely
- Make the BP scratch register warning more robust.
x86:
- Increase microcode maximum patch size for AMD to cope with new CPUs
which have a larger patch size.
- Fix a crash in the resource control filesystem when the removal of
the default resource group is attempted.
- Preserve Code and Data Prioritization enabled state accross CPU
hotplug.
- Update split lock cpu matching to use the new X86_MATCH macros.
- Change the split lock enumeration as Intel finaly decided that the
IA32_CORE_CAPABILITIES bits are not architectural contrary to what
the SDM claims. !@#%$^!
- Add Tremont CPU models to the split lock detection cpu match.
- Add a missing static attribute to make sparse happy"
* tag 'x86-urgent-2020-04-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/split_lock: Add Tremont family CPU models
x86/split_lock: Bits in IA32_CORE_CAPABILITIES are not architectural
x86/resctrl: Preserve CDP enable over CPU hotplug
x86/resctrl: Fix invalid attempt at removing the default resource group
x86/split_lock: Update to use X86_MATCH_INTEL_FAM6_MODEL()
x86/umip: Make umip_insns static
x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE
objtool: Make BP scratch register warning more robust
objtool: Fix switch table detection in .text.unlikely
objtool: Support Clang non-section symbols in ORC generation
objtool: Support Clang non-section symbols in ORC dump
objtool: Fix CONFIG_UBSAN_TRAP unreachable warnings
|
|
Tremont CPUs support IA32_CORE_CAPABILITIES bits to indicate whether
specific SKUs have support for split lock detection.
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200416205754.21177-4-tony.luck@intel.com
|
|
The Intel Software Developers' Manual erroneously listed bit 5 of the
IA32_CORE_CAPABILITIES register as an architectural feature. It is not.
Features enumerated by IA32_CORE_CAPABILITIES are model specific and
implementation details may vary in different cpu models. Thus it is only
safe to trust features after checking the CPU model.
Icelake client and server models are known to implement the split lock
detect feature even though they don't enumerate IA32_CORE_CAPABILITIES
[ tglx: Use switch() for readability and massage comments ]
Fixes: 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200416205754.21177-3-tony.luck@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Remove vdso code trying to free unallocated pages.
- Delete the space separator in the __emit_inst macro as it breaks the
clang integrated assembler.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Delete the space separator in __emit_inst
arm64: vdso: don't free unallocated pages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen update from Juergen Gross:
- a small cleanup patch
- a security fix for a bug in the Xen hypervisor to avoid enabling Xen
guests to crash dom0 on an unfixed hypervisor.
* tag 'for-linus-5.7-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: make _xen_start_info static
xen/xenbus: ensure xenbus_map_ring_valloc() returns proper grant status
|
|
Resctrl assumes that all CPUs are online when the filesystem is mounted,
and that CPUs remember their CDP-enabled state over CPU hotplug.
This goes wrong when resctrl's CDP-enabled state changes while all the
CPUs in a domain are offline.
When a domain comes online, enable (or disable!) CDP to match resctrl's
current setting.
Fixes: 5ff193fbde20 ("x86/intel_rdt: Add basic resctrl filesystem support")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200221162105.154163-1-james.morse@arm.com
|
|
Linux 3.14 unconditionally reads the RAPL PMU MSRs on boot, without handling
General Protection Faults on reading those MSRs. Rather than injecting a #GP,
which prevents boot, handle the MSRs by returning 0 for their data. Zero was
checked to be safe by code review of the RAPL PMU driver and in discussion
with the original driver author (eranian@google.com).
Signed-off-by: Venkatesh Srinivas <venkateshs@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200416184254.248374-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fixes a NULL pointer dereference, caused by the PIT firing an interrupt
before the interrupt table has been initialized.
SET_PIT2 can race with the creation of the IRQchip. In particular,
if SET_PIT2 is called with a low PIT timer period (after the creation of
the IOAPIC, but before the instantiation of the irq routes), the PIT can
fire an interrupt at an uninitialized table.
Signed-off-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Jon Cargille <jcargill@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20200416191152.259434-1-jcargill@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally")
introduced an unintended linker error for i.MX6 configurations that have
ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE,
nor ARM_PSCI_FW are selected.
Fix this by having v7_cpu_resume() compiled only when cpu_resume() it
calls is available as well.
The C declaration for the function remains unguarded to avoid future code
inadvertently using a stub and introducing a regression to the bug the
original commit fixed.
Cc: <stable@vger.kernel.org>
Fixes: 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally")
Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Tested-by: Roland Hieber <rhi@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The default resource group ("rdtgroup_default") is associated with the
root of the resctrl filesystem and should never be removed. New resource
groups can be created as subdirectories of the resctrl filesystem and
they can be removed from user space.
There exists a safeguard in the directory removal code
(rdtgroup_rmdir()) that ensures that only subdirectories can be removed
by testing that the directory to be removed has to be a child of the
root directory.
A possible deadlock was recently fixed with
334b0f4e9b1b ("x86/resctrl: Fix a deadlock due to inaccurate reference").
This fix involved associating the private data of the "mon_groups"
and "mon_data" directories to the resource group to which they belong
instead of NULL as before. A consequence of this change was that
the original safeguard code preventing removal of "mon_groups" and
"mon_data" found in the root directory failed resulting in attempts to
remove the default resource group that ends in a BUG:
kernel BUG at mm/slub.c:3969!
invalid opcode: 0000 [#1] SMP PTI
Call Trace:
rdtgroup_rmdir+0x16b/0x2c0
kernfs_iop_rmdir+0x5c/0x90
vfs_rmdir+0x7a/0x160
do_rmdir+0x17d/0x1e0
do_syscall_64+0x55/0x1d0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by improving the directory removal safeguard to ensure that
subdirectories of the resctrl root directory can only be removed if they
are a child of the resctrl filesystem's root _and_ not associated with
the default resource group.
Fixes: 334b0f4e9b1b ("x86/resctrl: Fix a deadlock due to inaccurate reference")
Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/884cbe1773496b5dbec1b6bd11bb50cffa83603d.1584461853.git.reinette.chatre@intel.com
|
|
The SPLIT_LOCK_CPU() macro escaped the tree-wide sweep for old-style
initialization. Update to use X86_MATCH_INTEL_FAM6_MODEL().
Fixes: 6650cdd9a8cc ("x86/split_lock: Enable split lock detection by kernel")
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200416205754.21177-2-tony.luck@intel.com
|
|
Fix the following sparse warning:
arch/arm64/xen/../../arm/xen/enlighten.c:39:19: warning: symbol
'_xen_start_info' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20200415084853.5808-1-yanaijie@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull networking fixes from David Miller:
1) Disable RISCV BPF JIT builds when !MMU, from Björn Töpel.
2) nf_tables leaves dangling pointer after free, fix from Eric Dumazet.
3) Out of boundary write in __xsk_rcv_memcpy(), fix from Li RongQing.
4) Adjust icmp6 message source address selection when routes have a
preferred source address set, from Tim Stallard.
5) Be sure to validate HSR protocol version when creating new links,
from Taehee Yoo.
6) CAP_NET_ADMIN should be sufficient to manage l2tp tunnels even in
non-initial namespaces, from Michael Weiß.
7) Missing release firmware call in mlx5, from Eran Ben Elisha.
8) Fix variable type in macsec_changelink(), caught by KASAN. Fix from
Taehee Yoo.
9) Fix pause frame negotiation in marvell phy driver, from Clemens
Gruber.
10) Record RX queue early enough in tun packet paths such that XDP
programs will see the correct RX queue index, from Gilberto Bertin.
11) Fix double unlock in mptcp, from Florian Westphal.
12) Fix offset overflow in ARM bpf JIT, from Luke Nelson.
13) marvell10g needs to soft reset PHY when coming out of low power
mode, from Russell King.
14) Fix MTU setting regression in stmmac for some chip types, from
Florian Fainelli.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
amd-xgbe: Use __napi_schedule() in BH context
mISDN: make dmril and dmrim static
net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes
net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode
tipc: fix incorrect increasing of link window
Documentation: Fix tcp_challenge_ack_limit default value
net: tulip: make early_486_chipsets static
dt-bindings: net: ethernet-phy: add desciption for ethernet-phy-id1234.d400
ipv6: remove redundant assignment to variable err
net/rds: Use ERR_PTR for rds_message_alloc_sgs()
net: mscc: ocelot: fix untagged packet drops when enslaving to vlan aware bridge
selftests/bpf: Check for correct program attach/detach in xdp_attach test
libbpf: Fix type of old_fd in bpf_xdp_set_link_opts
libbpf: Always specify expected_attach_type on program load if supported
xsk: Add missing check on user supplied headroom size
mac80211: fix channel switch trigger from unknown mesh peer
mac80211: fix race in ieee80211_register_hw()
net: marvell10g: soft-reset the PHY when coming out of low power
net: marvell10g: report firmware version
net/cxgb4: Check the return from t4_query_params properly
...
|
|
Since its inception the module was meant to be disabled by default, but
the original commit failed to add the relevant property.
Fixes: 4aba4cf82054 ("ARM: dts: bcm2835: Add the DSI module nodes and clocks")
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Misc EFI fixes, including the boot failure regression caused by the
BSS section not being cleared by the loaders"
* tag 'efi-urgent-2020-04-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/x86: Revert struct layout change to fix kexec boot regression
efi/x86: Don't remap text<->rodata gap read-only for mixed mode
efi/x86: Fix the deletion of variables in mixed mode
efi/libstub/file: Merge file name buffers to reduce stack usage
Documentation/x86, efi/x86: Clarify EFI handover protocol and its requirements
efi/arm: Deal with ADR going out of range in efi_enter_kernel()
efi/x86: Always relocate the kernel for EFI handover entry
efi/x86: Move efi stub globals from .bss to .data
efi/libstub/x86: Remove redundant assignment to pointer hdr
efi/cper: Use scnprintf() for avoiding potential buffer overflow
|
|
The function returns no value.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Fixes: 199cd1d7b534 ("KVM: SVM: Split svm_vcpu_run inline assembly to separate file")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200409114926.1407442-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
__svm_vcpu_run is a leaf function and does not need
a frame pointer. %rbp is also destroyed a few instructions
later when guest registers are loaded.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200409120440.1427215-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix:
arch/x86/kvm/svm/sev.c: In function ‘sev_pin_memory’:
arch/x86/kvm/svm/sev.c:360:3: error: implicit declaration of function ‘release_pages’;\
did you mean ‘reclaim_pages’? [-Werror=implicit-function-declaration]
360 | release_pages(pages, npinned);
| ^~~~~~~~~~~~~
| reclaim_pages
because svm.c includes pagemap.h but the carved out sev.c needs it too.
Triggered by a randconfig build.
Fixes: eaf78265a4ab ("KVM: SVM: Move SEV code to separate file")
Signed-off-by: Borislav Petkov <bp@suse.de>
Message-Id: <20200411160927.27954-1-bp@alien8.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
svm_vcpu_run does not change stack or frame pointer anymore.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Message-Id: <20200414113612.104501-1-ubizjak@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
nested_vmx_exit_reflected() returns a bool, not int. As such, refer to
the return values as true/false in the comment instead of 1/0.
Signed-off-by: Oliver Upton <oupton@google.com>
Message-Id: <20200414221241.134103-1-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|