| Age | Commit message (Collapse) | Author |
|---|
|
For some reasons, running a simple qemu-kvm command with KCSAN will
reset AMD hosts. It turns out svm_vcpu_run() could not be instrumented.
Disable it for now.
# /usr/libexec/qemu-kvm -name ubuntu-18.04-server-cloudimg -cpu host
-smp 2 -m 2G -hda ubuntu-18.04-server-cloudimg.qcow2
=== console output ===
Kernel 5.6.0-next-20200408+ on an x86_64
hp-dl385g10-05 login:
<...host reset...>
HPE ProLiant System BIOS A40 v1.20 (03/09/2018)
(C) Copyright 1982-2018 Hewlett Packard Enterprise Development LP
Early system initialization, please wait...
Signed-off-by: Qian Cai <cai@lca.pw>
Message-Id: <20200415153709.1559-1-cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry updates from Thomas Gleixner:
"The x86 entry, exception and interrupt code rework
This all started about 6 month ago with the attempt to move the Posix
CPU timer heavy lifting out of the timer interrupt code and just have
lockless quick checks in that code path. Trivial 5 patches.
This unearthed an inconsistency in the KVM handling of task work and
the review requested to move all of this into generic code so other
architectures can share.
Valid request and solved with another 25 patches but those unearthed
inconsistencies vs. RCU and instrumentation.
Digging into this made it obvious that there are quite some
inconsistencies vs. instrumentation in general. The int3 text poke
handling in particular was completely unprotected and with the batched
update of trace events even more likely to expose to endless int3
recursion.
In parallel the RCU implications of instrumenting fragile entry code
came up in several discussions.
The conclusion of the x86 maintainer team was to go all the way and
make the protection against any form of instrumentation of fragile and
dangerous code pathes enforcable and verifiable by tooling.
A first batch of preparatory work hit mainline with commit
d5f744f9a2ac ("Pull x86 entry code updates from Thomas Gleixner")
That (almost) full solution introduced a new code section
'.noinstr.text' into which all code which needs to be protected from
instrumentation of all sorts goes into. Any call into instrumentable
code out of this section has to be annotated. objtool has support to
validate this.
Kprobes now excludes this section fully which also prevents BPF from
fiddling with it and all 'noinstr' annotated functions also keep
ftrace off. The section, kprobes and objtool changes are already
merged.
The major changes coming with this are:
- Preparatory cleanups
- Annotating of relevant functions to move them into the
noinstr.text section or enforcing inlining by marking them
__always_inline so the compiler cannot misplace or instrument
them.
- Splitting and simplifying the idtentry macro maze so that it is
now clearly separated into simple exception entries and the more
interesting ones which use interrupt stacks and have the paranoid
handling vs. CR3 and GS.
- Move quite some of the low level ASM functionality into C code:
- enter_from and exit to user space handling. The ASM code now
calls into C after doing the really necessary ASM handling and
the return path goes back out without bells and whistels in
ASM.
- exception entry/exit got the equivivalent treatment
- move all IRQ tracepoints from ASM to C so they can be placed as
appropriate which is especially important for the int3
recursion issue.
- Consolidate the declaration and definition of entry points between
32 and 64 bit. They share a common header and macros now.
- Remove the extra device interrupt entry maze and just use the
regular exception entry code.
- All ASM entry points except NMI are now generated from the shared
header file and the corresponding macros in the 32 and 64 bit
entry ASM.
- The C code entry points are consolidated as well with the help of
DEFINE_IDTENTRY*() macros. This allows to ensure at one central
point that all corresponding entry points share the same
semantics. The actual function body for most entry points is in an
instrumentable and sane state.
There are special macros for the more sensitive entry points, e.g.
INT3 and of course the nasty paranoid #NMI, #MCE, #DB and #DF.
They allow to put the whole entry instrumentation and RCU handling
into safe places instead of the previous pray that it is correct
approach.
- The INT3 text poke handling is now completely isolated and the
recursion issue banned. Aside of the entry rework this required
other isolation work, e.g. the ability to force inline bsearch.
- Prevent #DB on fragile entry code, entry relevant memory and
disable it on NMI, #MC entry, which allowed to get rid of the
nested #DB IST stack shifting hackery.
- A few other cleanups and enhancements which have been made
possible through this and already merged changes, e.g.
consolidating and further restricting the IDT code so the IDT
table becomes RO after init which removes yet another popular
attack vector
- About 680 lines of ASM maze are gone.
There are a few open issues:
- An escape out of the noinstr section in the MCE handler which needs
some more thought but under the aspect that MCE is a complete
trainwreck by design and the propability to survive it is low, this
was not high on the priority list.
- Paravirtualization
When PV is enabled then objtool complains about a bunch of indirect
calls out of the noinstr section. There are a few straight forward
ways to fix this, but the other issues vs. general correctness were
more pressing than parawitz.
- KVM
KVM is inconsistent as well. Patches have been posted, but they
have not yet been commented on or picked up by the KVM folks.
- IDLE
Pretty much the same problems can be found in the low level idle
code especially the parts where RCU stopped watching. This was
beyond the scope of the more obvious and exposable problems and is
on the todo list.
The lesson learned from this brain melting exercise to morph the
evolved code base into something which can be validated and understood
is that once again the violation of the most important engineering
principle "correctness first" has caused quite a few people to spend
valuable time on problems which could have been avoided in the first
place. The "features first" tinkering mindset really has to stop.
With that I want to say thanks to everyone involved in contributing to
this effort. Special thanks go to the following people (alphabetical
order): Alexandre Chartre, Andy Lutomirski, Borislav Petkov, Brian
Gerst, Frederic Weisbecker, Josh Poimboeuf, Juergen Gross, Lai
Jiangshan, Macro Elver, Paolo Bonzin,i Paul McKenney, Peter Zijlstra,
Vitaly Kuznetsov, and Will Deacon"
* tag 'x86-entry-2020-06-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (142 commits)
x86/entry: Force rcu_irq_enter() when in idle task
x86/entry: Make NMI use IDTENTRY_RAW
x86/entry: Treat BUG/WARN as NMI-like entries
x86/entry: Unbreak __irqentry_text_start/end magic
x86/entry: __always_inline CR2 for noinstr
lockdep: __always_inline more for noinstr
x86/entry: Re-order #DB handler to avoid *SAN instrumentation
x86/entry: __always_inline arch_atomic_* for noinstr
x86/entry: __always_inline irqflags for noinstr
x86/entry: __always_inline debugreg for noinstr
x86/idt: Consolidate idt functionality
x86/idt: Cleanup trap_init()
x86/idt: Use proper constants for table size
x86/idt: Add comments about early #PF handling
x86/idt: Mark init only functions __init
x86/entry: Rename trace_hardirqs_off_prepare()
x86/entry: Clarify irq_{enter,exit}_rcu()
x86/entry: Remove DBn stacks
x86/entry: Remove debug IDT frobbing
x86/entry: Optimize local_db_save() for virt
...
|
|
Convert #MC to IDTENTRY_MCE:
- Implement the C entry points with DEFINE_IDTENTRY_MCE
- Emit the ASM stub with DECLARE_IDTENTRY_MCE
- Remove the ASM idtentry in 64bit
- Remove the open coded ASM entry code in 32bit
- Fixup the XEN/PV code
- Remove the old prototypes
- Remove the error code from *machine_check_vector() as
it is always 0 and not used by any of the functions
it can point to. Fixup all the functions as well.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20200505135314.334980426@linutronix.de
|
|
is_intercept takes an INTERCEPT_* constant, not SVM_EXIT_*; because
of this, the compiler was removing the body of the conditionals,
as if is_intercept returned 0.
This unveils a latent bug: when clearing the VINTR intercept,
int_ctl must also be changed in the L1 VMCB (svm->nested.hsave),
just like the intercept itself is also changed in the L1 VMCB.
Otherwise V_IRQ remains set and, due to the VINTR intercept being clear,
we get a spurious injection of a vector 0 interrupt on the next
L2->L1 vmexit.
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Move the arch-specific code into arch/arm64/kvm
- Start the post-32bit cleanup
- Cherry-pick a few non-invasive pre-NV patches
x86:
- Rework of TLB flushing
- Rework of event injection, especially with respect to nested
virtualization
- Nested AMD event injection facelift, building on the rework of
generic code and fixing a lot of corner cases
- Nested AMD live migration support
- Optimization for TSC deadline MSR writes and IPIs
- Various cleanups
- Asynchronous page fault cleanups (from tglx, common topic branch
with tip tree)
- Interrupt-based delivery of asynchronous "page ready" events (host
side)
- Hyper-V MSRs and hypercalls for guest debugging
- VMX preemption timer fixes
s390:
- Cleanups
Generic:
- switch vCPU thread wakeup from swait to rcuwait
The other architectures, and the guest side of the asynchronous page
fault work, will come next week"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (256 commits)
KVM: selftests: fix rdtsc() for vmx_tsc_adjust_test
KVM: check userspace_addr for all memslots
KVM: selftests: update hyperv_cpuid with SynDBG tests
x86/kvm/hyper-v: Add support for synthetic debugger via hypercalls
x86/kvm/hyper-v: enable hypercalls regardless of hypercall page
x86/kvm/hyper-v: Add support for synthetic debugger interface
x86/hyper-v: Add synthetic debugger definitions
KVM: selftests: VMX preemption timer migration test
KVM: nVMX: Fix VMX preemption timer migration
x86/kvm/hyper-v: Explicitly align hcall param for kvm_hyperv_exit
KVM: x86/pmu: Support full width counting
KVM: x86/pmu: Tweak kvm_pmu_get_msr to pass 'struct msr_data' in
KVM: x86: announce KVM_FEATURE_ASYNC_PF_INT
KVM: x86: acknowledgment mechanism for async pf page ready notifications
KVM: x86: interrupt based APF 'page ready' event delivery
KVM: introduce kvm_read_guest_offset_cached()
KVM: rename kvm_arch_can_inject_async_page_present() to kvm_arch_can_dequeue_async_page_present()
KVM: x86: extend struct kvm_vcpu_pv_apf_data with token info
Revert "KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously"
KVM: VMX: Replace zero-length array with flexible-array
...
|
|
The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com> [hyperv]
Acked-by: Gao Xiang <xiang@kernel.org> [erofs]
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Wei Liu <wei.liu@kernel.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.de
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Change kvm_pmu_get_msr() to get the msr_data struct, as the host_initiated
field from the struct could be used by get_msr. This also makes this API
consistent with kvm_pmu_set_msr. No functional changes.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Message-Id: <20200529074347.124619-2-like.xu@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently, APF mechanism relies on the #PF abuse where the token is being
passed through CR2. If we switch to using interrupts to deliver page-ready
notifications we need a different way to pass the data. Extent the existing
'struct kvm_vcpu_pv_apf_data' with token information for page-ready
notifications.
While on it, rename 'reason' to 'flags'. This doesn't change the semantics
as we only have reasons '1' and '2' and these can be treated as bit flags
but KVM_PV_REASON_PAGE_READY is going away with interrupt based delivery
making 'reason' name misleading.
The newly introduced apf_put_user_ready() temporary puts both flags and
token information, this will be changed to put token only when we switch
to interrupt based notifications.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200525144125.143875-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Similar to VMX, the state that is captured through the currently available
IOCTLs is a mix of L1 and L2 state, dependent on whether the L2 guest was
running at the moment when the process was interrupted to save its state.
In particular, the SVM-specific state for nested virtualization includes
the L1 saved state (including the interrupt flag), the cached L2 controls,
and the GIF.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This allows fetching the registers from the hsave area when setting
up the NPT shadow MMU, and is needed for KVM_SET_NESTED_STATE (which
runs long after the CR0, CR4 and EFER values in vcpu have been switched
to hold L2 guest state).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
According to the AMD manual, the effect of turning off EFER.SVME while a
guest is running is undefined. We make it leave guest mode immediately,
similar to the effect of clearing the VMX bit in MSR_IA32_FEAT_CTL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The authoritative state does not come from the VMCB once in guest mode,
but KVM_SET_NESTED_STATE can still perform checks on L1's provided SVM
controls because we get them from userspace.
Therefore, split out a function to do them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The L1 flags can be found in the save area of svm->nested.hsave, fish
it from there so that there is one fewer thing to migrate.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now that the int_ctl field is stored in svm->nested.ctl.int_ctl, we can
use it instead of vcpu->arch.hflags to check whether L2 is running
in V_INTR_MASKING mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This bit was added to nested VMX right when nested_run_pending was
introduced, but it is not yet there in nSVM. Since we can have pending
events that L0 injected directly into L2 on vmentry, we have to transfer
them into L1's queue.
For this to work, one important change is required: svm_complete_interrupts
(which clears the "injected" fields from the previous VMRUN, and updates them
from svm->vmcb's EXITINTINFO) must be placed before we inject the vmexit.
This is not too scary though; VMX even does it in vmx_vcpu_run.
While at it, the nested_vmexit_inject tracepoint is moved towards the
end of nested_svm_vmexit. This ensures that the synthesized EXITINTINFO
is visible in the trace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There is only one GIF flag for the whole processor, so make sure it is not clobbered
when switching to L2 (in which case we also have to include the V_GIF_ENABLE_MASK,
lest we confuse enable_gif/disable_gif/gif_set). When going back, L1 could in
theory have entered L2 without issuing a CLGI so make sure the svm_set_gif is
done last, after svm->vmcb->control.int_ctl has been copied back from hsave.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Extract the code that is needed to implement CLGI and STGI,
so that we can run it from VMRUN and vmexit (and in the future,
KVM_SET_NESTED_STATE). Skip the request for KVM_REQ_EVENT unless needed,
subsuming the evaluate_pending_interrupts optimization that is found
in enter_svm_guest_mode.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
kvm_vcpu_apicv_active must be false when nested virtualization is enabled,
so there is no need to check it in clgi_interception.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The control state changes on every L2->L0 vmexit, and we will have to
serialize it in the nested state. So keep it up to date in svm->nested.ctl
and just copy them back to the nested VMCB in nested_svm_vmexit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Restore the INT_CTL value from the guest's VMCB once we've stopped using
it, so that virtual interrupts can be injected as requested by L1.
V_TPR is up-to-date however, and it can change if the guest writes to CR8,
so keep it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In preparation for nested SVM save/restore, store all data that matters
from the VMCB control area into svm->nested. It will then become part
of the nested SVM state that is saved by KVM_SET_NESTED_STATE and
restored by KVM_GET_NESTED_STATE, just like the cached vmcs12 for nVMX.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This will come in handy when we put a struct vmcb_control_area in
svm->nested.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Use l1_tsc_offset to compute svm->vcpu.arch.tsc_offset and
svm->vmcb->control.tsc_offset, instead of relying on hsave.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Everything that is needed during nested state restore is now part of
nested_prepare_vmcb_control.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Split out filling svm->vmcb.save and svm->vmcb.control before VMRUN.
Only the latter will be useful when restoring nested SVM state.
This patch introduces no semantic change, so the MMU setup is still
done in nested_prepare_vmcb_save. The next patch will clean up things.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When restoring SVM nested state, the control state cache in svm->nested
will have to be filled, but the save state will not have to be moved
into svm->vmcb. Therefore, pull the code that handles the control area
into a separate function.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Unmapping the nested VMCB in enter_svm_guest_mode is a bit of a wart,
since the map argument is not used elsewhere in the function. There are
just two callers, and those are also the place where kvm_vcpu_map is
called, so it is cleaner to unmap there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
svm_load_mmu_pgd is delaying the write of GUEST_CR3 to prepare_vmcs02 as
an optimization, but this is only correct before the nested vmentry.
If userspace is modifying CR3 with KVM_SET_SREGS after the VM has
already been put in guest mode, the value of CR3 will not be updated.
Remove the optimization, which almost never triggers anyway.
This was was added in commit 689f3bf21628 ("KVM: x86: unify callbacks
to load paging root", 2020-03-16) just to keep the two vendor-specific
modules closer, but we'll fix VMX too.
Fixes: 689f3bf21628 ("KVM: x86: unify callbacks to load paging root")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The usual drill at this point, except there is no code to remove because this
case was not handled at all.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All events now inject vmexits before vmentry rather than after vmexit. Therefore,
exit_required is not set anymore and we can remove it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This allows exceptions injected by the emulator to be properly delivered
as vmexits. The code also becomes simpler, because we can just let all
L0-intercepted exceptions go through the usual path. In particular, our
emulation of the VMX #DB exit qualification is very much simplified,
because the vmexit injection path can use kvm_deliver_exception_payload
to update DR6.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In case an interrupt arrives after nested.check_events but before the
call to kvm_cpu_has_injectable_intr, we could end up enabling the interrupt
window even if the interrupt is actually going to be a vmexit. This is
useless rather than harmful, but it really complicates reasoning about
SVM's handling of the VINTR intercept. We'd like to never bother with
the VINTR intercept if V_INTR_MASKING=1 && INTERCEPT_INTR=1, because in
that case there is no interrupt window and we can just exit the nested
guest whenever we want.
This patch moves the opening of the interrupt window inside
inject_pending_event. This consolidates the check for pending
interrupt/NMI/SMI in one place, and makes KVM's usage of immediate
exits more consistent, extending it beyond just nested virtualization.
There are two functional changes here. They only affect corner cases,
but overall they simplify the inject_pending_event.
- re-injection of still-pending events will also use req_immediate_exit
instead of using interrupt-window intercepts. This should have no impact
on performance on Intel since it simply replaces an interrupt-window
or NMI-window exit for a preemption-timer exit. On AMD, which has no
equivalent of the preemption time, it may incur some overhead but an
actual effect on performance should only be visible in pathological cases.
- kvm_arch_interrupt_allowed and kvm_vcpu_has_events will return true
if an interrupt, NMI or SMI is blocked by nested_run_pending. This
makes sense because entering the VM will allow it to make progress
and deliver the event.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
L2 guest hang is observed after 'exit_required' was dropped and nSVM
switched to check_nested_events() completely. The hang is a busy loop when
e.g. KVM is emulating an instruction (e.g. L2 is accessing MMIO space and
we drop to userspace). After nested_svm_vmexit() and when L1 is doing VMRUN
nested guest's RIP is not advanced so KVM goes into emulating the same
instruction which caused nested_svm_vmexit() and the loop continues.
nested_svm_vmexit() is not new, however, with check_nested_events() we're
now calling it later than before. In case by that time KVM has modified
register state we may pick stale values from VMCB when trying to save
nested guest state to nested VMCB.
nVMX code handles this case correctly: sync_vmcs02_to_vmcs12() called from
nested_vmx_vmexit() does e.g 'vmcs12->guest_rip = kvm_rip_read(vcpu)' and
this ensures KVM-made modifications are preserved. Do the same for nSVM.
Generally, nested_vmx_vmexit()/nested_svm_vmexit() need to pick up all
nested guest state modifications done by KVM after vmexit. It would be
great to find a way to express this in a way which would not require to
manually track these changes, e.g. nested_{vmcb,vmcs}_get_field().
Co-debugged-with: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20200527090102.220647-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Restoring the ASID from the hsave area on VMEXIT is wrong, because its
value depends on the handling of TLB flushes. Just skipping the field in
copy_vmcb_control_area will do.
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Async page faults have to be trapped in the host (L1 in this case),
since the APF reason was passed from L0 to L1 and stored in the L1 APF
data page. This was completely reversed: the page faults were passed
to the guest, a L2 hypervisor.
Cc: stable@vger.kernel.org
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Take a u32 for the index in has_emulated_msr() to match hardware, which
treats MSR indices as unsigned 32-bit values. Functionally, taking a
signed int doesn't cause problems with the current code base, but could
theoretically cause problems with 32-bit KVM, e.g. if the index were
checked via a less-than statement, which would evaluate incorrectly for
MSR indices with bit 31 set.
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200218234012.7110-3-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Merge AMD fixes before doing more development work.
|
|
We can simply look at bits 52-53 to identify MMIO entries in KVM's page
tables. Therefore, there is no need to pass a mask to kvm_mmu_set_mmio_spte_mask.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD
|
|
Pull kvm fixes from Paolo Bonzini:
"A new testcase for guest debugging (gdbstub) that exposed a bunch of
bugs, mostly for AMD processors. And a few other x86 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix off-by-one error in kvm_vcpu_ioctl_x86_setup_mce
KVM: x86: Fix pkru save/restore when guest CR4.PKE=0, move it to x86.c
KVM: SVM: Disable AVIC before setting V_IRQ
KVM: Introduce kvm_make_all_cpus_request_except()
KVM: VMX: pass correct DR6 for GD userspace exit
KVM: x86, SVM: isolate vcpu->arch.dr6 from vmcb->save.dr6
KVM: SVM: keep DR6 synchronized with vcpu->arch.dr6
KVM: nSVM: trap #DB and #BP to userspace if guest debugging is on
KVM: selftests: Add KVM_SET_GUEST_DEBUG test
KVM: X86: Fix single-step with KVM_SET_GUEST_DEBUG
KVM: X86: Set RTM for DB_VECTOR too for KVM_EXIT_DEBUG
KVM: x86: fix DR6 delivery for various cases of #DB injection
KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly
|
|
This has already been handled in the prior call to svm_clear_vintr().
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1588771076-73790-5-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Code clean up and remove unnecessary intercept check for
INTERCEPT_VINTR.
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Message-Id: <1588771076-73790-4-git-send-email-suravee.suthikulpanit@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Adds a fastpath_t typedef since enum lines are a bit long, and replace
EXIT_FASTPATH_SKIP_EMUL_INS with two new exit_fastpath_completion enum values.
- EXIT_FASTPATH_EXIT_HANDLED kvm will still go through it's full run loop,
but it would skip invoking the exit handler.
- EXIT_FASTPATH_REENTER_GUEST complete fastpath, guest can be re-entered
without invoking the exit handler or going
back to vcpu_run
Tested-by: Haiwei Li <lihaiwei@tencent.com>
Cc: Haiwei Li <lihaiwei@tencent.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1588055009-12677-4-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Replace KVM's PT_PAGE_TABLE_LEVEL, PT_DIRECTORY_LEVEL and PT_PDPE_LEVEL
with the kernel's PG_LEVEL_4K, PG_LEVEL_2M and PG_LEVEL_1G. KVM's
enums are borderline impossible to remember and result in code that is
visually difficult to audit, e.g.
if (!enable_ept)
ept_lpage_level = 0;
else if (cpu_has_vmx_ept_1g_page())
ept_lpage_level = PT_PDPE_LEVEL;
else if (cpu_has_vmx_ept_2m_page())
ept_lpage_level = PT_DIRECTORY_LEVEL;
else
ept_lpage_level = PT_PAGE_TABLE_LEVEL;
versus
if (!enable_ept)
ept_lpage_level = 0;
else if (cpu_has_vmx_ept_1g_page())
ept_lpage_level = PG_LEVEL_1G;
else if (cpu_has_vmx_ept_2m_page())
ept_lpage_level = PG_LEVEL_2M;
else
ept_lpage_level = PG_LEVEL_4K;
No functional change intended.
Suggested-by: Barret Rhoden <brho@google.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200428005422.4235-4-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Snapshot the TDP level now that it's invariant (SVM) or dependent only
on host capabilities and guest CPUID (VMX). This avoids having to call
kvm_x86_ops.get_tdp_level() when initializing a TDP MMU and/or
calculating the page role, and thus avoids the associated retpoline.
Drop the WARN in vmx_get_tdp_level() as updating CPUID while L2 is
active is legal, if dodgy.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-11-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move CR0 caching into the standard register caching mechanism in order
to take advantage of the availability checks provided by regs_avail.
This avoids multiple VMREADs in the (uncommon) case where kvm_read_cr0()
is called multiple times in a single VM-Exit, and more importantly
eliminates a kvm_x86_ops hook, saves a retpoline on SVM when reading
CR0, and squashes the confusing naming discrepancy of "cache_reg" vs.
"decache_cr0_guest_bits".
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-8-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move CR4 caching into the standard register caching mechanism in order
to take advantage of the availability checks provided by regs_avail.
This avoids multiple VMREADs and retpolines (when configured) during
nested VMX transitions as kvm_read_cr4_bits() is invoked multiple times
on each transition, e.g. when stuffing CR0 and CR3.
As an added bonus, this eliminates a kvm_x86_ops hook, saves a retpoline
on SVM when reading CR4, and squashes the confusing naming discrepancy
of "cache_reg" vs. "decache_cr4_guest_bits".
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-7-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Save L1's TSC offset in 'struct kvm_vcpu_arch' and drop the kvm_x86_ops
hook read_l1_tsc_offset(). This avoids a retpoline (when configured)
when reading L1's effective TSC, which is done at least once on every
VM-Exit.
No functional change intended.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200502043234.12481-2-sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM is not handling the case where EIP wraps around the 32-bit address
space (that is, outside long mode). This is needed both in vmx.c
and in emulate.c. SVM with NRIPS is okay, but it can still print
an error to dmesg due to integer overflow.
Reported-by: Nick Peterson <everdox@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add an argument to interrupt_allowed and nmi_allowed, to checking if
interrupt injection is blocked. Use the hook to handle the case where
an interrupt arrives between check_nested_events() and the injection
logic. Drop the retry of check_nested_events() that hack-a-fixed the
same condition.
Blocking injection is also a bit of a hack, e.g. KVM should do exiting
and non-exiting interrupt processing in a single pass, but it's a more
precise hack. The old comment is also misleading, e.g. KVM_REQ_EVENT is
purely an optimization, setting it on every run loop (which KVM doesn't
do) should not affect functionality, only performance.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Message-Id: <20200423022550.15113-13-sean.j.christopherson@intel.com>
[Extend to SVM, add SMI and NMI. Even though NMI and SMI cannot come
asynchronously right now, making the fix generic is easy and removes a
special case. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
