summaryrefslogtreecommitdiffstats
path: root/arch/sparc
AgeCommit message (Collapse)Author
2018-12-20vfs: Suppress MS_* flag defs within the kernel unless explicitly enabledDavid Howells
Only the mount namespace code that implements mount(2) should be using the MS_* flags. Suppress them inside the kernel unless uapi/linux/mount.h is included. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: David Howells <dhowells@redhat.com>
2018-12-20dma-mapping: zero memory returned from dma_alloc_*Christoph Hellwig
If we want to map memory from the DMA allocator to userspace it must be zeroed at allocation time to prevent stale data leaks. We already do this on most common architectures, but some architectures don't do this yet, fix them up, either by passing GFP_ZERO when we use the normal page allocator or doing a manual memset otherwise. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Sam Ravnborg <sam@ravnborg.org> [sparc]
2018-12-20bpf: sparc64: Enable sparc64 jit to provide bpf_line_infoMartin KaFai Lau
This patch enables sparc64's bpf_int_jit_compile() to provide bpf_line_info by calling bpf_prog_fill_jited_linfo(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-19sparc/iommu: fix ->map_sg return valueChristoph Hellwig
Just decrementing the sz value will lead to an incorrect return value. Instead of just introducing a local variable switch to the standard for_each_sg helper and standard naming of the arguments. Fixes: ce65d36f3e ("sparc: remove the sparc32_dma_ops indirection") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2018-12-19sparc/io-unit: fix ->map_sg return valueChristoph Hellwig
Just decrementing the sz value will lead to an incorrect return value. Instead of just introducing a local variable switch to the standard for_each_sg helper and standard naming of the arguments. Fixes: ce65d36f3e ("sparc: remove the sparc32_dma_ops indirection") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2018-12-13dma-mapping: bypass indirect calls for dma-directChristoph Hellwig
Avoid expensive indirect calls in the fast path DMA mapping operations by directly calling the dma_direct_* ops if we are using the directly mapped DMA operations. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13dma-mapping: always build the direct mapping codeChristoph Hellwig
All architectures except for sparc64 use the dma-direct code in some form, and even for sparc64 we had the discussion of a direct mapping mode a while ago. In preparation for directly calling the direct mapping code don't bother having it optionally but always build the code in. This is a minor hardship for some powerpc and arm configs that don't pull it in yet (although they should in a relase ot two), and sparc64 which currently doesn't need it at all, but it will reduce the ifdef mess we'd otherwise need significantly. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Jesper Dangaard Brouer <brouer@redhat.com> Tested-by: Tony Luck <tony.luck@intel.com>
2018-12-13sparc: use DT node full_name in sparc_dma_alloc_resourceChristoph Hellwig
The sparc tree already has this change for the pre-refactored code, but pulling it into the dma-mapping tree like this should ease the merge conflicts a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: David Miller <davem@davemloft.net>
2018-12-11sparc: merge 32-bit and 64-bit version of pci.hChristoph Hellwig
There are enough common defintions that a single header seems nicer. Also drop the pointless <linux/dma-mapping.h> include. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2018-12-11sparc: move the leon PCI memory space comment to <asm/leon.h>Christoph Hellwig
It has nothing to do with the content of the pci.h header. Suggested by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net>
2018-12-11sparc: remove not required includes from dma-mapping.hChristoph Hellwig
The only thing we need to explicitly pull in is the defines for the CPU type. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net>
2018-12-11sparc: remove the sparc32_dma_ops indirectionChristoph Hellwig
There is no good reason to have a double indirection for the sparc32 dma ops, so remove the sparc32_dma_ops and define separate dma_map_ops instance for the different IOMMU types. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net>
2018-12-11sparc: factor the dma coherent mapping into helperChristoph Hellwig
Factor the code to remap memory returned from the DMA coherent allocator into two helpers that can be shared by the IOMMU and direct mapping code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2018-12-11sparc: remove not needed sbus_dma_ops methodsChristoph Hellwig
No need to BUG_ON() on the cache maintainance ops - they are no-ops by default, and there is nothing in the DMA API contract that prohibits calling them on sbus devices (even if such drivers are unlikely to ever appear). Similarly a dma_supported method that always returns 0 is rather pointless. The only thing that indicates is that no one ever calls the method on sbus devices. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: David S. Miller <davem@davemloft.net>
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Several conflicts, seemingly all over the place. I used Stephen Rothwell's sample resolutions for many of these, if not just to double check my own work, so definitely the credit largely goes to him. The NFP conflict consisted of a bug fix (moving operations past the rhashtable operation) while chaning the initial argument in the function call in the moved code. The net/dsa/master.c conflict had to do with a bug fix intermixing of making dsa_master_set_mtu() static with the fixing of the tagging attribute location. cls_flower had a conflict because the dup reject fix from Or overlapped with the addition of port range classifiction. __set_phy_supported()'s conflict was relatively easy to resolve because Andrew fixed it in both trees, so it was just a matter of taking the net-next copy. Or at least I think it was :-) Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup() intermixed with changes on how the sdif and caller_net are calculated in these code paths in net-next. The remaining BPF conflicts were largely about the addition of the __bpf_md_ptr stuff in 'net' overlapping with adjustments and additions to the relevant data structure where the MD pointer macros are used. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06arch: switch the default on ARCH_HAS_SG_CHAINChristoph Hellwig
These days architectures are mostly out of the business of dealing with struct scatterlist at all, unless they have architecture specific iommu drivers. Replace the ARCH_HAS_SG_CHAIN symbol with a ARCH_NO_SG_CHAIN one only enabled for architectures with horrible legacy iommu drivers like alpha and parisc, and conditionally for arm which wants to keep it disable for legacy platforms. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
2018-12-06sparc: remove the mapping_error dma_map_ops methodChristoph Hellwig
Sparc already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-12-04Merge branch 'for-mingo' of ↵Ingo Molnar
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/rcu Pull RCU changes from Paul E. McKenney: - Convert RCU's BUG_ON() and similar calls to WARN_ON() and similar. - Replace calls of RCU-bh and RCU-sched update-side functions to their vanilla RCU counterparts. This series is a step towards complete removal of the RCU-bh and RCU-sched update-side functions. ( Note that some of these conversions are going upstream via their respective maintainers. ) - Documentation updates, including a number of flavor-consolidation updates from Joel Fernandes. - Miscellaneous fixes. - Automate generation of the initrd filesystem used for rcutorture testing. - Convert spin_is_locked() assertions to instead use lockdep. ( Note that some of these conversions are going upstream via their respective maintainers. ) - SRCU updates, especially including a fix from Dennis Krein for a bag-on-head-class bug. - RCU torture-test updates. Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: 1) Some implicit switch fallthrough fixes from Stephen Rothwell. 2) Missing of_node_put() in various sparc drivers from Yangtao Li. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: drivers/tty: add missing of_node_put() drivers/sbus/char: add of_node_put() sbus: char: add of_node_put() sparc32: supress another implicit-fallthrough warning sparc32: suppress an implicit-fallthrough warning sparc: suppress the implicit-fallthrough warning arch/sparc: Use kzalloc_node
2018-11-30Merge tag 'trace-v4.20-rc3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "While rewriting the function graph tracer, I discovered a design flaw that was introduced by a patch that tried to fix one bug, but by doing so created another bug. As both bugs corrupt the output (but they do not crash the kernel), I decided to fix the design such that it could have both bugs fixed. The original fix, fixed time reporting of the function graph tracer when doing a max_depth of one. This was code that can test how much the kernel interferes with userspace. But in doing so, it could corrupt the time keeping of the function profiler. The issue is that the curr_ret_stack variable was being used for two different meanings. One was to keep track of the stack pointer on the ret_stack (shadow stack used by the function graph tracer), and the other use case was the graph call depth. Although, the two may be closely related, where they got updated was the issue that lead to the two different bugs that required the two use cases to be updated differently. The big issue with this fix is that it requires changing each architecture. The good news is, I was able to remove a lot of code that was duplicated within the architectures and place it into a single location. Then I could make the fix in one place. I pushed this code into linux-next to let it settle over a week, and before doing so, I cross compiled all the affected architectures to make sure that they built fine. In the mean time, I also pulled in a patch that fixes the sched_switch previous tasks state output, that was not actually correct" * tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: sched, trace: Fix prev_state output in sched_switch tracepoint function_graph: Have profiler use curr_ret_stack and not depth function_graph: Reverse the order of pushing the ret_stack and the callback function_graph: Move return callback before update of curr_ret_stack function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack function_graph: Make ftrace_push_return_trace() static sparc/function_graph: Simplify with function_graph_enter() sh/function_graph: Simplify with function_graph_enter() s390/function_graph: Simplify with function_graph_enter() riscv/function_graph: Simplify with function_graph_enter() powerpc/function_graph: Simplify with function_graph_enter() parisc: function_graph: Simplify with function_graph_enter() nds32: function_graph: Simplify with function_graph_enter() MIPS: function_graph: Simplify with function_graph_enter() microblaze: function_graph: Simplify with function_graph_enter() arm64: function_graph: Simplify with function_graph_enter() ARM: function_graph: Simplify with function_graph_enter() x86/function_graph: Simplify with function_graph_enter() function_graph: Create function_graph_enter() to consolidate architecture code
2018-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Trivial conflict in net/core/filter.c, a locally computed 'sdif' is now an argument to the function. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27sparc/function_graph: Simplify with function_graph_enter()Steven Rostedt (VMware)
The function_graph_enter() function does the work of calling the function graph hook function and the management of the shadow stack, simplifying the work done in the architecture dependent prepare_ftrace_return(). Have sparc use the new code, and remove the shadow stack management as well as having to set up the trace structure. This is needed to prepare for a fix of a design bug on how the curr_ret_stack is used. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Cc: stable@kernel.org Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback") Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-27sparc32: supress another implicit-fallthrough warningStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27sparc32: suppress an implicit-fallthrough warningStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27sparc: suppress the implicit-fallthrough warningStephen Rothwell
sparc builds with -Werror Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27sparc: Adjust bpf JIT prologue for PSEUDO calls.David Miller
Move all arguments into output registers from input registers. This path is exercised by test_verifier.c's "calls: two calls with args" test. Adjust BPF_TAILCALL_PROLOGUE_SKIP as needed. Let's also make the prologue length a constant size regardless of the combination of ->saw_frame_pointer and ->saw_tail_call settings. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-11-26sparc: Correct ctx->saw_frame_pointer logic.David Miller
We need to initialize the frame pointer register not just if it is seen as a source operand, but also if it is seen as the destination operand of a store or an atomic instruction (which effectively is a source operand). This is exercised by test_verifier's "non-invalid fp arithmetic" Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-26sparc: Fix JIT fused branch convergance.David Miller
On T4 and later sparc64 cpus we can use the fused compare and branch instruction. However, it can only be used if the branch destination is in the range of a signed 10-bit immediate offset. This amounts to 1024 instructions forwards or backwards. After the commit referenced in the Fixes: tag, the largest possible size program seen by the JIT explodes by a significant factor. As a result of this convergance takes many more passes since the expanded "BPF_LDX | BPF_MSH | BPF_B" code sequence, for example, contains several embedded branch on condition instructions. On each pass, as suddenly new fused compare and branch instances become valid, this makes thousands more in range for the next pass. And so on and so forth. This is most greatly exemplified by "BPF_MAXINSNS: exec all MSH" which takes 35 passes to converge, and shrinks the image by about 64K. To decrease the cost of this number of convergance passes, do the convergance pass before we have the program image allocated, just like other JITs (such as x86) do. Fixes: e0cea7ce988c ("bpf: implement ld_abs/ld_ind in native bpf") Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-11-23pcmcia: allow PCMCIA support independent of the architectureChristoph Hellwig
There is nothing architecture specific in the PCMCIA core, so allow building it everywhere. The actual host controllers will depend on ISA, PCI or a specific SOC. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-23PCI: consolidate the PCI_SYSCALL symbolChristoph Hellwig
Let architectures select the syscall support instead of duplicating the kconfig entry. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-23PCI: consolidate the PCI_DOMAINS and PCI_DOMAINS_GENERIC config optionsChristoph Hellwig
Move the definitions to drivers/pci and let the architectures select them. Two small differences to before: PCI_DOMAINS_GENERIC now selects PCI_DOMAINS, cutting down the churn for modern architectures. As the only architectured arm did previously also offer PCI_DOMAINS as a user visible choice in addition to selecting it from the relevant configs, this is gone now. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-23PCI: consolidate PCI config entry in drivers/pciChristoph Hellwig
There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAVE_PCI symbol that indicates availability of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the rest in drivers/pci. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Palmer Dabbelt <palmer@sifive.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Paul Burton <paul.burton@mips.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-11-20crypto: remove useless initializations of cra_listEric Biggers
Some algorithms initialize their .cra_list prior to registration. But this is unnecessary since crypto_register_alg() will overwrite .cra_list when adding the algorithm to the 'crypto_alg_list'. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignments. Exception: paes_s390.c uses cra_list to check whether the algorithm is registered or not, so I left that as-is for now. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-18arch/sparc: Use kzalloc_nodeSabyasachi Gupta
Replaced kmalloc_node + memset with kzalloc_node Signed-off-by: Sabyasachi Gupta <sabyasachi.linux@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: generate uapi header and system call table filesFiroz Khan
System call table generation script must be run to gener- ate unistd_32/64.h and syscall_table_32/64/c32.h files. This patch will have changes which will invokes the script. This patch will generate unistd_32/64.h and syscall_table- _32/64/c32.h files by the syscall table generation script invoked by parisc/Makefile and the generated files against the removed files must be identical. The generated uapi header file will be included in uapi/- asm/unistd.h and generated system call table header file will be included by kernel/systbls_32/64.S file. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: add system call table generation supportFiroz Khan
The system call tables are in different format in all architecture and it will be difficult to manually add, modify or delete the syscall table entries in the res- pective files. To make it easy by keeping a script and which will generate the uapi header and syscall table file. This change will also help to unify the implemen- tation across all architectures. The system call table generation script is added in kernel/syscalls directory which contain the scripts to generate both uapi header file and system call table files. The syscall.tbl will be input for the scripts. syscall.tbl contains the list of available system calls along with system call number and corresponding entry point. Add a new system call in this architecture will be possible by adding new entry in the syscall.tbl file. Adding a new table entry consisting of: - System call number. - ABI. - System call name. - Entry point name. - Compat entry name, if required. syscallhdr.sh and syscalltbl.sh will generate uapi header unistd_32/64.h and syscall_table_32/64/c32.h files respect- ively. Both .sh files will parse the content syscall.tbl to generate the header and table files. unistd_32/64.h will be included by uapi/asm/unistd.h and syscall_table_32/64/- c32.h is included by kernel/syscall.S - the real system call table. ARM, s390 and x86 architecuture does have similar support. I leverage their implementation to come up with a generic solution. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: add __NR_syscalls along with NR_syscallsFiroz Khan
NR_syscalls macro holds the number of system call exist in sparc architecture. We have to change the value of NR- _syscalls, if we add or delete a system call. One of the patch in this patch series has a script which will generate a uapi header based on syscall.tbl file. The syscall.tbl file contains the total number of system calls information. So we have two option to update NR_sy- scalls value. 1. Update NR_syscalls in asm/unistd.h manually by count- ing the no.of system calls. No need to update NR_sys- calls until we either add a new system call or delete existing system call. 2. We can keep this feature it above mentioned script, that will count the number of syscalls and keep it in a generated file. In this case we don't need to expli- citly update NR_syscalls in asm/unistd.h file. The 2nd option will be the recommended one. For that, I added the __NR_syscalls macro in uapi/asm/unistd.h along with NR_syscalls asm/unistd.h. The macro __NR_syscalls also added for making the name convention same across all architecture. While __NR_syscalls isn't strictly part of the uapi, having it as part of the generated header to simplifies the implementation. We also need to enclose this macro with #ifdef __KERNEL__ to avoid side effects. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: move __IGNORE* entries to non uapi headerFiroz Khan
All the __IGNORE* entries are resides in the uapi header file move to non uapi header asm/unistd.h as it is not used by any user space applications. It is correct to keep __IGNORE* entry in non uapi header asm/unistd.h while uapi/asm/unistd.h must hold information only useful for user space applications. One of the patch in this patch series will generate uapi header file. The information which directly used by the user space application must be present in uapi file. Signed-off-by: Firoz Khan <firoz.khan@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: Use DT node full_name instead of name for resourcesRob Herring
The device_node.name pointer is going to be removed. As the device_node.full_name is now just the name+unit-address instead of the full path, use the full_name pointer instead. This will add the unit-address if there is one to the resource name. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: Remove unused leon_trans_initRob Herring
The function leon_trans_init is unused. Remove it and save us from figuring out what to do with a '<NULL>' node name. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: Use device_type helpers to access the node typeRob Herring
Remove directly accessing device_node.type pointer and use the accessors instead. This will eventually allow removing the type pointer. Replace the open coded iterating over child nodes with for_each_child_of_node() while we're here. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: Use of_node_name_eq for node name comparisonsRob Herring
Convert string compares of DT node names to use of_node_name_eq helper instead. This removes direct access to the node name pointer. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: Convert to using %pOFn instead of device_node.nameRob Herring
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. This was originally applied for 4.19, but reverted. The problematic changes to prom_{32,64}.c have been dropped. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: prom: use property "name" directly to construct node namesRob Herring
In preparation to remove direct accesses to the device_node.name pointer, retrieve the node name from the "name" property instead. This is slightly less optimal as we have to walk the kernel's DT property list to find the "name" property. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-18sparc: Convert to using %pOF instead of full_nameRob Herring
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Cc: "David S. Miller" <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net: remove VLAN_TAG_PRESENTMichał Mirosław
Replace VLAN_TAG_PRESENT with single bit flag and free up VLAN.CFI overload. Now VLAN.CFI is visible in networking stack and can be passed around intact. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net/bpf_jit: SPARC: split VLAN_PRESENT bit handling from VLAN_TCIMichał Mirosław
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08sparc/oprofile: Convert timer_stop() to use synchronize_rcu()Paul E. McKenney
Now that synchronize_rcu() waits for preempt-disable regions of code in addition to explicitly marked RCU read-side critical sections, synchronize_rcu() can be used in place of synchronize_sched(). This commit therefore makes that change. Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Cc: Robert Richter <rric@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: <oprofile-list@lists.sf.net> Cc: <sparclinux@vger.kernel.org>
2018-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Two small fixes" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Wire up compat getpeername and getsockname. sparc64: Remvoe set_fs() from perf_callchain_user().
2018-10-31sparc64: Wire up compat getpeername and getsockname.David S. Miller
Fixes: 8b30ca73b7cc ("sparc: Add all necessary direct socket system calls.") Reported-by: Joseph Myers <joseph@codesourcery.com> Signed-off-by: David S. Miller <davem@davemloft.net>