Age | Commit message (Collapse) | Author |
|
Let's allow to test the implementation without needing HW support.
When "simulate=1" is specified when loading the module, we bypass all
HW checks and HW calls. The sysfs file "simulate_loan_target_kb" can
be used to simulate HW requests.
The simualtion mode can be activated using:
modprobe cmm debug=1 simulate=1
And the requested loan target can be changed using:
echo X > /sys/devices/system/cmm/cmm0/simulate_loan_target_kb
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-11-david@redhat.com
|
|
balloon_page_alloc() will use GFP_HIGHUSER_MOVABLE in case we have
CONFIG_BALLOON_COMPACTION. This is now possible, as balloon pages are
movable with CONFIG_BALLOON_COMPACTION. Without
CONFIG_BALLOON_COMPACTION, GFP_HIGHUSER is used.
Note that apart from that, balloon_page_alloc() uses the following
flags:
__GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN
And current code used:
GFP_NOIO | __GFP_NOWARN | __GFP_NORETRY | __GFP_NOMEMALLOC
GFP_HIGHUSER/GFP_HIGHUSER_MOVABLE include
__GFP_RECLAIM | __GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM
GFP_NOIO is __GFP_RECLAIM.
With CONFIG_BALLOON_COMPACTION, we essentially add:
__GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM | __GFP_MOVABLE
Without CONFIG_BALLOON_COMPACTION, we essentially add:
__GFP_IO | __GFP_FS | __GFP_HARDWALL | __GFP_HIGHMEM
I assume this is fine, as this is what all other balloon compaction
users use. If it turns out to be a problem, we could add __GFP_MOVABLE
manually if we have CONFIG_BALLOON_COMPACTION.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-10-david@redhat.com
|
|
We can now get rid of the cmm_lock and completely rely on the balloon
compaction internals, which now also manage the page list and the
lock.
Inflated/"loaned" pages are now movable. Memory blocks that contain
such pages can get offlined. Also, all such pages will be marked
PageOffline() and can therefore be excluded in memory dumps using
recent versions of makedumpfile.
Don't switch to balloon_page_alloc() yet (due to the GFP_NOIO). Will
do that separately to discuss this change in detail.
Signed-off-by: David Hildenbrand <david@redhat.com>
[mpe: Add isolated_pages-- in cmm_migratepage() as suggested by David]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-9-david@redhat.com
|
|
When switching to balloon compaction, we want to drop the cmm_lock and
completely rely on the balloon compaction list lock internally.
loaned_pages is currently protected under the cmm_lock.
Note: Right now cmm_alloc_pages() and cmm_free_pages() can be called
at the same time, e.g., via the thread and a concurrent OOM notifier.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-8-david@redhat.com
|
|
The memory isolate notifier was added to allow to offline memory
blocks that contain inflated/"loaned" pages. We can achieve the same
using the balloon compaction framework.
Get rid of the memory isolate notifier. Also, we can get rid of
cmm_mem_going_offline(), as we will never reach that code path now
when we have allocated memory in the balloon (allocated pages are
unmovable and will no longer be special-cased using the memory
isolation notifier).
Leave the memory notifier in place, so we can still back off in case
memory gets offlined.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-7-david@redhat.com
|
|
adjust_managed_page_count() performs a totalram_pages_add(), but also
adjusts the managed pages of the zone. Let's use that instead, similar
to virtio-balloon. Use it before freeing a page.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-6-david@redhat.com
|
|
We can simply store the pages in a list (page->lru), no need for a
separate data structure (+ complicated handling). This is how most
other balloon drivers store allocated pages without additional
tracking data.
For the notifiers, use page_to_pfn() to check if a page is in the
applicable range. Use page_to_phys() in plpar_page_set_loaned() and
plpar_page_set_active() (I assume due to the __pa() that's the right
thing to do).
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-5-david@redhat.com
|
|
No need to initialize rc. Also, let's return 0 directly when
succeeding.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-4-david@redhat.com
|
|
If we don't set the rc, we will return "0", making it look like we
succeeded.
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-3-david@redhat.com
|
|
When unloading the module, one gets
------------[ cut here ]------------
Device 'cmm0' does not have a release() function, it is broken and must be fixed. See Documentation/kobject.txt.
WARNING: CPU: 0 PID: 19308 at drivers/base/core.c:1244 .device_release+0xcc/0xf0
...
We only have one static fake device. There is nothing to do when
releasing the device (via cmm_exit()).
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191031142933.10779-2-david@redhat.com
|
|
Older firmwares provided information about Dynamic Reconfig
Connectors (DRC) through several device tree properties, namely
ibm,drc-types, ibm,drc-indexes, ibm,drc-names, and
ibm,drc-power-domains. New firmwares have the ability to present this
same information in a much condensed format through a device tree
property called ibm,drc-info.
The existing cpu DLPAR hotplug code only understands the older DRC
property format when validating the drc-index of a cpu during a
hotplug add. This updates those code paths to use the ibm,drc-info
property, when present, instead for validation.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-4-git-send-email-tyreld@linux.ibm.com
|
|
There are a couple subtle errors in the mapping between cpu-ids and a
cpus associated drc-index when using the new ibm,drc-info property.
The first is that while drc-info may have been a supported firmware
feature at boot it is possible we have migrated to a CEC with older
firmware that doesn't support the ibm,drc-info property. In that case
the device tree would have been updated after migration to remove the
ibm,drc-info property and replace it with the older style ibm,drc-*
properties for types, indexes, names, and power-domains. PAPR even
goes as far as dictating that if we advertise support for drc-info
that we are capable of supporting either property type at runtime.
The second is that the first value of the ibm,drc-info property is
the int encoded count of drc-info entries. As such "value" returned
by of_prop_next_u32() is pointing at that count, and not the first
element of the first drc-info entry as is expected by the
of_read_drc_info_cell() helper.
Fix the first by ignoring DRC-INFO firmware feature and instead
testing directly for ibm,drc-info, and then falling back to the
old style ibm,drc-indexes in the case it doesn't exit.
Fix the second by incrementing value to the next element prior to
parsing drc-info entries.
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-3-git-send-email-tyreld@linux.ibm.com
|
|
The ibm,drc-info property is an array property that contains drc-info
entries such that each entry is made up of 2 string encoded elements
followed by 5 int encoded elements. The of_read_drc_info_cell()
helper contains comments that correctly name the expected elements
and their encoding. However, the usage of of_prop_next_string() and
of_prop_next_u32() introduced a subtle skippage of the first u32.
This is a result of of_prop_next_string() returning a pointer to the
next property value which is not a string, but actually a (__be32 *).
As, a result the following call to of_prop_next_u32() passes over the
current int encoded value and actually stores the next one wrongly.
Simply endian swap the current value in place after reading the first
two string values. The remaining int encoded values can then be read
correctly using of_prop_next_u32().
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573449697-5448-2-git-send-email-tyreld@linux.ibm.com
|
|
Merge the secureboot support, as well as the IMA changes needed to
support it.
From Nayna's cover letter:
In order to verify the OS kernel on PowerNV systems, secure boot
requires X.509 certificates trusted by the platform. These are
stored in secure variables controlled by OPAL, called OPAL secure
variables. In order to enable users to manage the keys, the secure
variables need to be exposed to userspace.
OPAL provides the runtime services for the kernel to be able to
access the secure variables. This patchset defines the kernel
interface for the OPAL APIs. These APIs are used by the hooks, which
load these variables to the keyring and expose them to the userspace
for reading/writing.
Overall, this patchset adds the following support:
* expose secure variables to the kernel via OPAL Runtime API interface
* expose secure variables to the userspace via kernel sysfs interface
* load kernel verification and revocation keys to .platform and
.blacklist keyring respectively.
The secure variables can be read/written using simple linux
utilities cat/hexdump.
For example:
Path to the secure variables is: /sys/firmware/secvar/vars
Each secure variable is listed as directory.
$ ls -l
total 0
drwxr-xr-x. 2 root root 0 Aug 20 21:20 db
drwxr-xr-x. 2 root root 0 Aug 20 21:20 KEK
drwxr-xr-x. 2 root root 0 Aug 20 21:20 PK
The attributes of each of the secure variables are (for example: PK):
$ ls -l
total 0
-r--r--r--. 1 root root 4096 Oct 1 15:10 data
-r--r--r--. 1 root root 65536 Oct 1 15:10 size
--w-------. 1 root root 4096 Oct 1 15:12 update
The "data" is used to read the existing variable value using
hexdump. The data is stored in ESL format. The "update" is used to
write a new value using cat. The update is to be submitted as AUTH
file.
|
|
The X.509 certificates trusted by the platform and required to secure
boot the OS kernel are wrapped in secure variables, which are
controlled by OPAL.
This patch adds firmware/kernel interface to read and write OPAL
secure variables based on the unique key.
This support can be enabled using CONFIG_OPAL_SECVAR.
Signed-off-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Eric Richter <erichte@linux.ibm.com>
[mpe: Make secvar_ops __ro_after_init, only build opal-secvar.c if PPC_SECURE_BOOT=y]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1573441836-3632-2-git-send-email-nayna@linux.ibm.com
|
|
dlpar_online_cpu() attempts to online all threads of a core that has
been added to an LPAR. If onlining a non-primary thread
fails (e.g. due to an allocation failure), the core is left with at
least one thread online. dlpar_cpu_add() attempts to roll back the
whole operation, releasing the core back to the platform. However,
since some threads of the core being removed are still online, the
BUG_ON(cpu_online(cpu)) in pseries_remove_processor() strikes:
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 3 PID: 8587 Comm: drmgr Not tainted 5.3.0-rc2-00190-g9b123d1ea237-dirty #46
NIP: c0000000000eeb2c LR: c0000000000eeac4 CTR: c0000000000ee9e0
REGS: c0000001f745b6c0 TRAP: 0700 Not tainted (5.3.0-rc2-00190-g9b123d1ea237-dirty)
MSR: 800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 44002448 XER: 00000000
CFAR: c00000000195d718 IRQMASK: 0
GPR00: c0000000000eeac4 c0000001f745b950 c0000000032f6200 0000000000000008
GPR04: 0000000000000008 c000000003349c78 0000000000000040 00000000000001ff
GPR08: 0000000000000008 0000000000000000 0000000000000001 0007ffffffffffff
GPR12: 0000000084002844 c00000001ecacb80 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000008
GPR24: c000000003349ee0 c00000000334a2e4 c0000000fca4d7a8 c000000001d20048
GPR28: 0000000000000001 ffffffffffffffff ffffffffffffffff c0000000fca4d7c4
NIP [c0000000000eeb2c] pseries_smp_notifier+0x14c/0x2e0
LR [c0000000000eeac4] pseries_smp_notifier+0xe4/0x2e0
Call Trace:
[c0000001f745b950] [c0000000000eeac4] pseries_smp_notifier+0xe4/0x2e0 (unreliable)
[c0000001f745ba10] [c0000000001ac774] notifier_call_chain+0xb4/0x190
[c0000001f745bab0] [c0000000001ad62c] blocking_notifier_call_chain+0x7c/0xb0
[c0000001f745baf0] [c00000000167bda0] of_detach_node+0xc0/0x110
[c0000001f745bb50] [c0000000000e7ae4] dlpar_detach_node+0x64/0xa0
[c0000001f745bb80] [c0000000000edefc] dlpar_cpu_add+0x31c/0x360
[c0000001f745bc10] [c0000000000ee980] dlpar_cpu_probe+0x50/0xb0
[c0000001f745bc50] [c00000000002cf70] arch_cpu_probe+0x40/0x70
[c0000001f745bc70] [c000000000ccd808] cpu_probe_store+0x48/0x80
[c0000001f745bcb0] [c000000000cbcef8] dev_attr_store+0x38/0x60
[c0000001f745bcd0] [c00000000059c980] sysfs_kf_write+0x70/0xb0
[c0000001f745bd10] [c00000000059afb8] kernfs_fop_write+0xf8/0x280
[c0000001f745bd60] [c0000000004b437c] __vfs_write+0x3c/0x70
[c0000001f745bd80] [c0000000004b8710] vfs_write+0xd0/0x220
[c0000001f745bdd0] [c0000000004b8acc] ksys_write+0x7c/0x140
[c0000001f745be20] [c00000000000bbd8] system_call+0x5c/0x68
Move dlpar_offline_cpu() up in the file so that dlpar_online_cpu() can
use it to re-offline any threads that have been onlined when an error
is encountered.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: e666ae0b10aa ("powerpc/pseries: Update CPU hotplug error recovery")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016183611.10867-3-nathanl@linux.ibm.com
|
|
Remove some stray blank lines, convert a printk to pr_warn, and
address a line length violation.
One functional change: use WARN_ON instead of BUG_ON in case H_PROD of
a ceded thread yields an unexpected result from the platform. We can
expect this code path to get uninterruptibly stuck in __cpu_die() if
this happens, but that's more desirable than crashing.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: b6db63d1a7f0 ("pseries/pseries: Add code to online/offline CPUs of a DLPAR node")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016183611.10867-2-nathanl@linux.ibm.com
|
|
Merge our fixes branch, primarily to bring in the powernv CPU hotplug
warning fix.
|
|
Commit e78a7614f3876 ("idle: Prevent late-arriving interrupts from
disrupting offline") changes arch_cpu_idle_dead to be called with
interrupts disabled, which triggers the WARN in pnv_smp_cpu_kill_self.
Fix this by fixing up irq_happened after hard disabling, rather than
requiring there are no pending interrupts, similarly to what was done
done until commit 2525db04d1cc5 ("powerpc/powernv: Simplify lazy IRQ
handling in CPU offline").
Fixes: e78a7614f3876 ("idle: Prevent late-arriving interrupts from disrupting offline")
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Add unexpected_mask rather than checking for known bad values,
change the WARN_ON() to a WARN_ON_ONCE()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191022115814.22456-1-npiggin@gmail.com
|
|
is full
With bolted hash page table entry, kernel currently only use primary hash group
when inserting the hash page table entry. In the rare case where kernel find all the
8 primary hash slot occupied by bolted entries, this can result in hash page
table insert failure for bolted entries. Avoid this by using the secondary hash
group.
This is different from what kernel does for the non-bolted mapping. With
non-bolted entries kernel will try secondary before removing an existing entry
from hash page table group. With bolted prefer primary hash group and hence
try to insert the page table entry by removing a slot from primary before trying
the secondary hash group.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024093542.29777-3-aneesh.kumar@linux.ibm.com
|
|
No functional change in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191024093542.29777-1-aneesh.kumar@linux.ibm.com
|
|
Recent cleanup in the way EEH support is added to a device causes a
kernel oops when the cxl driver probes a device and creates virtual
devices discovered on the FPGA:
BUG: Kernel NULL pointer dereference at 0x000000a0
Faulting instruction address: 0xc000000000048070
Oops: Kernel access of bad area, sig: 7 [#1]
...
NIP eeh_add_device_late.part.9+0x50/0x1e0
LR eeh_add_device_late.part.9+0x3c/0x1e0
Call Trace:
_dev_info+0x5c/0x6c (unreliable)
pnv_pcibios_bus_add_device+0x60/0xb0
pcibios_bus_add_device+0x40/0x60
pci_bus_add_device+0x30/0x100
pci_bus_add_devices+0x64/0xd0
cxl_pci_vphb_add+0xe0/0x130 [cxl]
cxl_probe+0x504/0x5b0 [cxl]
local_pci_probe+0x6c/0x110
work_for_cpu_fn+0x38/0x60
The root cause is that those cxl virtual devices don't have a
representation in the device tree and therefore no associated pci_dn
structure. In eeh_add_device_late(), pdn is NULL, so edev is NULL and
we oops.
We never had explicit support for EEH for those virtual devices.
Instead, EEH events are reported to the (real) pci device and handled
by the cxl driver. Which can then forward to the virtual devices and
handle dependencies. The fact that we try adding EEH support for the
virtual devices is new and a side-effect of the recent cleanup.
This patch fixes it by skipping adding EEH support on powernv for
devices which don't have a pci_dn structure.
The cxl driver doesn't create virtual devices on pseries so this patch
doesn't fix it there intentionally.
Fixes: b905f8cdca77 ("powerpc/eeh: EEH for pSeries hot plug")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191016162833.22509-1-fbarrat@linux.ibm.com
|
|
Merge our fixes branch, to bring in the fixes for the KVM PCR bug and
the spufs crash.
|
|
When issuing a BMC soft poweroff during IPL, the poweroff can be lost
so the machine would not poweroff.
This is because opal messages can be received before the opal-power
code registered its notifiers.
Fix it by buffering messages. If we receive a message and do not yet
have a handler for that type, store the message and replay when a
handler for that type is registered.
Signed-off-by: Deb McLemore <debmc@linux.vnet.ibm.com>
[mpe: Single unlock path in opal_message_notifier_register(), tweak
comments/formatting and change log.]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1526868278-4204-1-git-send-email-debmc@linux.vnet.ibm.com
|
|
The spu_fs_context was not set in fc->fs_private, this caused a crash
when accessing ctx->mode in spufs_create_root().
Fixes: d2e0981c3b9a ("vfs: Convert spufs to use the new mount API")
Signed-off-by: Emmanuel Nicolet <emmanuel.nicolet@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191008141342.GA266797@gmail.com
|
|
A validation check to prevent out of bounds read/write inside
functions papr_scm_meta_{get,set}() is off-by-one that prevent reads
and writes to the last byte of the label area.
This bug manifests as a failure to probe a dimm when libnvdimm is
unable to read the entire config-area as advertised by
ND_CMD_GET_CONFIG_SIZE. This usually happens when there are large
number of namespaces created in the region backed by the dimm and the
label-index spans max possible config-area. An error of the form below
usually reported in the kernel logs:
[ 255.293912] nvdimm: probe of nmem0 failed with error -22
The patch fixes these validation checks there by letting libnvdimm
access the entire config-area.
Fixes: 53e80bd042773('powerpc/nvdimm: Add support for multibyte read/write for metadata')
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190927062002.3169-1-vaibhav@linux.ibm.com
|
|
Since commit 1211ee61b4a8 ("powerpc/pseries: Read TLB Block Invalidate
Characteristics"), a warning message is displayed when booting a guest
on top of KVM:
lpar: arch/powerpc/platforms/pseries/lpar.c pseries_lpar_read_hblkrm_characteristics Error calling get-system-parameter (0xfffffffd)
This message is displayed because this hypervisor is not supporting
the H_BLOCK_REMOVE hcall and thus is not exposing the corresponding
feature.
Reading the TLB Block Invalidate Characteristics should not be done if
the feature is not exposed.
Fixes: 1211ee61b4a8 ("powerpc/pseries: Read TLB Block Invalidate Characteristics")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191001132928.72555-1-ldufour@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"An assortment of fixes that were either missed by me, or didn't arrive
quite in time for the first v5.4 pull.
- Most notable is a fix for an issue with tlbie (broadcast TLB
invalidation) on Power9, when using the Radix MMU. The tlbie can
race with an mtpid (move to PID register, essentially MMU context
switch) on another thread of the core, which can cause stores to
continue to go to a page after it's unmapped.
- A fix in our KVM code to add a missing barrier, the lack of which
has been observed to cause missed IPIs and subsequently stuck CPUs
in the host.
- A change to the way we initialise PCR (Processor Compatibility
Register) to make it forward compatible with future CPUs.
- On some older PowerVM systems our H_BLOCK_REMOVE support could
oops, fix it to detect such systems and fallback to the old
invalidation method.
- A fix for an oops seen on some machines when using KASAN on 32-bit.
- A handful of other minor fixes, and two new selftests.
Thanks to: Alistair Popple, Aneesh Kumar K.V, Christophe Leroy,
Gustavo Romero, Joel Stanley, Jordan Niethe, Laurent Dufour, Michael
Roth, Oliver O'Halloran"
* tag 'powerpc-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/eeh: Fix eeh eeh_debugfs_break_device() with SRIOV devices
powerpc/nvdimm: use H_SCM_QUERY hcall on H_OVERLAP error
powerpc/nvdimm: Use HCALL error as the return value
selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue
powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9
powerpc/book3s64/radix: Rename CPU_FTR_P9_TLBIE_BUG feature flag
powerpc/book3s64/mm: Don't do tlbie fixup for some hardware revisions
powerpc/pseries: Call H_BLOCK_REMOVE when supported
powerpc/pseries: Read TLB Block Invalidate Characteristics
KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag
powerpc/mm: Fix an Oops in kasan_mmu_init()
powerpc/mm: Add a helper to select PAGE_KERNEL_RO or PAGE_READONLY
powerpc/64s: Set reserved PCR bits
powerpc: Fix definition of PCR bits to work with old binutils
powerpc/book3s64/radix: Remove WARN_ON in destroy_context()
powerpc/tm: Add tm-poison test
|
|
Right now we force an unbind of SCM memory at drcindex on H_OVERLAP error.
This really slows down operations like kexec where we get the H_OVERLAP
error because we don't go through a full hypervisor re init.
H_OVERLAP error for a H_SCM_BIND_MEM hcall indicates that SCM memory at
drc index is already bound. Since we don't specify a logical memory
address for bind hcall, we can use the H_SCM_QUERY hcall to query
the already bound logical address.
Boot time difference with and without patch is:
[ 5.583617] IOMMU table initialized, virtual merging enabled
[ 5.603041] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Retrying bind after unbinding
[ 301.514221] papr_scm ibm,persistent-memory:ibm,pmemory@44108001: Retrying bind after unbinding
[ 340.057238] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs
after fix
[ 5.101572] IOMMU table initialized, virtual merging enabled
[ 5.116984] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Querying SCM details
[ 5.117223] papr_scm ibm,persistent-memory:ibm,pmemory@44108001: Querying SCM details
[ 5.120530] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190903123452.28620-2-aneesh.kumar@linux.ibm.com
|
|
This simplifies the error handling and also enable us to switch to
H_SCM_QUERY hcall in a later patch on H_OVERLAP error.
We also do some kernel print formatting fixup in this patch.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190903123452.28620-1-aneesh.kumar@linux.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull more mount API conversions from Al Viro:
"Assorted conversions of options parsing to new API.
gfs2 is probably the most serious one here; the rest is trivial stuff.
Other things in what used to be #work.mount are going to wait for the
next cycle (and preferably go via git trees of the filesystems
involved)"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
gfs2: Convert gfs2 to fs_context
vfs: Convert spufs to use the new mount API
vfs: Convert hypfs to use the new mount API
hypfs: Fix error number left in struct pointer member
vfs: Convert functionfs to use the new mount API
vfs: Convert bpf to use the new mount API
|
|
Depending on the hardware and the hypervisor, the hcall H_BLOCK_REMOVE
may not be able to process all the page sizes for a segment base page
size, as reported by the TLB Invalidate Characteristics.
For each pair of base segment page size and actual page size, this
characteristic tells us the size of the block the hcall supports.
In the case, the hcall is not supporting a pair of base segment page
size, actual page size, it is returning H_PARAM which leads to a panic
like this:
kernel BUG at /home/srikar/work/linux.git/arch/powerpc/platforms/pseries/lpar.c:466!
Oops: Exception in kernel mode, sig: 5 [#1]
BE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 28 PID: 583 Comm: modprobe Not tainted 5.2.0-master #5
NIP: c0000000000be8dc LR: c0000000000be880 CTR: 0000000000000000
REGS: c0000007e77fb130 TRAP: 0700 Not tainted (5.2.0-master)
MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 42224824 XER: 20000000
CFAR: c0000000000be8fc IRQMASK: 0
GPR00: 0000000022224828 c0000007e77fb3c0 c000000001434d00 0000000000000005
GPR04: 9000000004fa8c00 0000000000000000 0000000000000003 0000000000000001
GPR08: c0000007e77fb450 0000000000000000 0000000000000001 ffffffffffffffff
GPR12: c0000007e77fb450 c00000000edfcb80 0000cd7d3ea30000 c0000000016022b0
GPR16: 00000000000000b0 0000cd7d3ea30000 0000000000000001 c080001f04f00105
GPR20: 0000000000000003 0000000000000004 c000000fbeb05f58 c000000001602200
GPR24: 0000000000000000 0000000000000004 8800000000000000 c000000000c5d148
GPR28: c000000000000000 8000000000000000 a000000000000000 c0000007e77fb580
NIP [c0000000000be8dc] .call_block_remove+0x12c/0x220
LR [c0000000000be880] .call_block_remove+0xd0/0x220
Call Trace:
0xc000000fb8c00240 (unreliable)
.pSeries_lpar_flush_hash_range+0x578/0x670
.flush_hash_range+0x44/0x100
.__flush_tlb_pending+0x3c/0xc0
.zap_pte_range+0x7ec/0x830
.unmap_page_range+0x3f4/0x540
.unmap_vmas+0x94/0x120
.exit_mmap+0xac/0x1f0
.mmput+0x9c/0x1f0
.do_exit+0x388/0xd60
.do_group_exit+0x54/0x100
.__se_sys_exit_group+0x14/0x20
system_call+0x5c/0x70
Instruction dump:
39400001 38a00000 4800003c 60000000 60420000 7fa9e800 38e00000 419e0014
7d29d278 7d290074 7929d182 69270001 <0b070000> 7d495378 394a0001 7fa93040
The call to H_BLOCK_REMOVE should only be made for the supported pair
of base segment page size, actual page size and using the correct
maximum block size.
Due to the required complexity in do_block_remove() and
call_block_remove(), and the fact that currently a block size of 8 is
returned by the hypervisor, we are only supporting 8 size block to the
H_BLOCK_REMOVE hcall.
In order to identify this limitation easily in the code, a local
define HBLKR_SUPPORTED_SIZE defining the currently supported block
size, and a dedicated checking helper is_supported_hlbkr() are
introduced.
For regular pages and hugetlb, the assumption is made that the page
size is equal to the base page size. For THP the page size is assumed
to be 16M.
Fixes: ba2dd8a26baa ("powerpc/pseries/mm: call H_BLOCK_REMOVE")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190920130523.20441-3-ldufour@linux.ibm.com
|
|
The PAPR document specifies the TLB Block Invalidate Characteristics
which tells for each pair of segment base page size, actual page size,
the size of the block the hcall H_BLOCK_REMOVE supports.
These characteristics are loaded at boot time in a new table
hblkr_size. The table is separate from the mmu_psize_def because this
is specific to the pseries platform.
A new init function, pseries_lpar_read_hblkrm_characteristics() is
added to read the characteristics. It is called from
pSeries_setup_arch().
Fixes: ba2dd8a26baa ("powerpc/pseries/mm: call H_BLOCK_REMOVE")
Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190920130523.20441-2-ldufour@linux.ibm.com
|
|
On a 2-socket Power9 system with 32 cores/128 threads (SMT4) and 1TB
of memory running the following guest configs:
guest A:
- 224GB of memory
- 56 VCPUs (sockets=1,cores=28,threads=2), where:
VCPUs 0-1 are pinned to CPUs 0-3,
VCPUs 2-3 are pinned to CPUs 4-7,
...
VCPUs 54-55 are pinned to CPUs 108-111
guest B:
- 4GB of memory
- 4 VCPUs (sockets=1,cores=4,threads=1)
with the following workloads (with KSM and THP enabled in all):
guest A:
stress --cpu 40 --io 20 --vm 20 --vm-bytes 512M
guest B:
stress --cpu 4 --io 4 --vm 4 --vm-bytes 512M
host:
stress --cpu 4 --io 4 --vm 2 --vm-bytes 256M
the below soft-lockup traces were observed after an hour or so and
persisted until the host was reset (this was found to be reliably
reproducible for this configuration, for kernels 4.15, 4.18, 5.0,
and 5.3-rc5):
[ 1253.183290] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1253.183319] rcu: 124-....: (5250 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=1941
[ 1256.287426] watchdog: BUG: soft lockup - CPU#105 stuck for 23s! [CPU 52/KVM:19709]
[ 1264.075773] watchdog: BUG: soft lockup - CPU#24 stuck for 23s! [worker:19913]
[ 1264.079769] watchdog: BUG: soft lockup - CPU#31 stuck for 23s! [worker:20331]
[ 1264.095770] watchdog: BUG: soft lockup - CPU#45 stuck for 23s! [worker:20338]
[ 1264.131773] watchdog: BUG: soft lockup - CPU#64 stuck for 23s! [avocado:19525]
[ 1280.408480] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
[ 1316.198012] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1316.198032] rcu: 124-....: (21003 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=8243
[ 1340.411024] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
[ 1379.212609] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1379.212629] rcu: 124-....: (36756 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=14714
[ 1404.413615] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
[ 1442.227095] rcu: INFO: rcu_sched self-detected stall on CPU
[ 1442.227115] rcu: 124-....: (52509 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=21403
[ 1455.111787] INFO: task worker:19907 blocked for more than 120 seconds.
[ 1455.111822] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.111833] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.111884] INFO: task worker:19908 blocked for more than 120 seconds.
[ 1455.111905] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.111925] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.111966] INFO: task worker:20328 blocked for more than 120 seconds.
[ 1455.111986] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.111998] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112048] INFO: task worker:20330 blocked for more than 120 seconds.
[ 1455.112068] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112097] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112138] INFO: task worker:20332 blocked for more than 120 seconds.
[ 1455.112159] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112179] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112210] INFO: task worker:20333 blocked for more than 120 seconds.
[ 1455.112231] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112242] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112282] INFO: task worker:20335 blocked for more than 120 seconds.
[ 1455.112303] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
[ 1455.112332] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1455.112372] INFO: task worker:20336 blocked for more than 120 seconds.
[ 1455.112392] Tainted: G L 5.3.0-rc5-mdr-vanilla+ #1
CPUs 45, 24, and 124 are stuck on spin locks, likely held by
CPUs 105 and 31.
CPUs 105 and 31 are stuck in smp_call_function_many(), waiting on
target CPU 42. For instance:
# CPU 105 registers (via xmon)
R00 = c00000000020b20c R16 = 00007d1bcd800000
R01 = c00000363eaa7970 R17 = 0000000000000001
R02 = c0000000019b3a00 R18 = 000000000000006b
R03 = 000000000000002a R19 = 00007d537d7aecf0
R04 = 000000000000002a R20 = 60000000000000e0
R05 = 000000000000002a R21 = 0801000000000080
R06 = c0002073fb0caa08 R22 = 0000000000000d60
R07 = c0000000019ddd78 R23 = 0000000000000001
R08 = 000000000000002a R24 = c00000000147a700
R09 = 0000000000000001 R25 = c0002073fb0ca908
R10 = c000008ffeb4e660 R26 = 0000000000000000
R11 = c0002073fb0ca900 R27 = c0000000019e2464
R12 = c000000000050790 R28 = c0000000000812b0
R13 = c000207fff623e00 R29 = c0002073fb0ca808
R14 = 00007d1bbee00000 R30 = c0002073fb0ca800
R15 = 00007d1bcd600000 R31 = 0000000000000800
pc = c00000000020b260 smp_call_function_many+0x3d0/0x460
cfar= c00000000020b270 smp_call_function_many+0x3e0/0x460
lr = c00000000020b20c smp_call_function_many+0x37c/0x460
msr = 900000010288b033 cr = 44024824
ctr = c000000000050790 xer = 0000000000000000 trap = 100
CPU 42 is running normally, doing VCPU work:
# CPU 42 stack trace (via xmon)
[link register ] c00800001be17188 kvmppc_book3s_radix_page_fault+0x90/0x2b0 [kvm_hv]
[c000008ed3343820] c000008ed3343850 (unreliable)
[c000008ed33438d0] c00800001be11b6c kvmppc_book3s_hv_page_fault+0x264/0xe30 [kvm_hv]
[c000008ed33439d0] c00800001be0d7b4 kvmppc_vcpu_run_hv+0x8dc/0xb50 [kvm_hv]
[c000008ed3343ae0] c00800001c10891c kvmppc_vcpu_run+0x34/0x48 [kvm]
[c000008ed3343b00] c00800001c10475c kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
[c000008ed3343b90] c00800001c0f5a78 kvm_vcpu_ioctl+0x470/0x7c8 [kvm]
[c000008ed3343d00] c000000000475450 do_vfs_ioctl+0xe0/0xc70
[c000008ed3343db0] c0000000004760e4 ksys_ioctl+0x104/0x120
[c000008ed3343e00] c000000000476128 sys_ioctl+0x28/0x80
[c000008ed3343e20] c00000000000b388 system_call+0x5c/0x70
--- Exception: c00 (System Call) at 00007d545cfd7694
SP (7d53ff7edf50) is in userspace
It was subsequently found that ipi_message[PPC_MSG_CALL_FUNCTION]
was set for CPU 42 by at least 1 of the CPUs waiting in
smp_call_function_many(), but somehow the corresponding
call_single_queue entries were never processed by CPU 42, causing the
callers to spin in csd_lock_wait() indefinitely.
Nick Piggin suggested something similar to the following sequence as
a possible explanation (interleaving of CALL_FUNCTION/RESCHEDULE
IPI messages seems to be most common, but any mix of CALL_FUNCTION and
!CALL_FUNCTION messages could trigger it):
CPU
X: smp_muxed_ipi_set_message():
X: smp_mb()
X: message[RESCHEDULE] = 1
X: doorbell_global_ipi(42):
X: kvmppc_set_host_ipi(42, 1)
X: ppc_msgsnd_sync()/smp_mb()
X: ppc_msgsnd() -> 42
42: doorbell_exception(): // from CPU X
42: ppc_msgsync()
105: smp_muxed_ipi_set_message():
105: smb_mb()
// STORE DEFERRED DUE TO RE-ORDERING
--105: message[CALL_FUNCTION] = 1
| 105: doorbell_global_ipi(42):
| 105: kvmppc_set_host_ipi(42, 1)
| 42: kvmppc_set_host_ipi(42, 0)
| 42: smp_ipi_demux_relaxed()
| 42: // returns to executing guest
| // RE-ORDERED STORE COMPLETES
->105: message[CALL_FUNCTION] = 1
105: ppc_msgsnd_sync()/smp_mb()
105: ppc_msgsnd() -> 42
42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
105: // hangs waiting on 42 to process messages/call_single_queue
This can be prevented with an smp_mb() at the beginning of
kvmppc_set_host_ipi(), such that stores to message[<type>] (or other
state indicated by the host_ipi flag) are ordered vs. the store to
to host_ipi.
However, doing so might still allow for the following scenario (not
yet observed):
CPU
X: smp_muxed_ipi_set_message():
X: smp_mb()
X: message[RESCHEDULE] = 1
X: doorbell_global_ipi(42):
X: kvmppc_set_host_ipi(42, 1)
X: ppc_msgsnd_sync()/smp_mb()
X: ppc_msgsnd() -> 42
42: doorbell_exception(): // from CPU X
42: ppc_msgsync()
// STORE DEFERRED DUE TO RE-ORDERING
-- 42: kvmppc_set_host_ipi(42, 0)
| 42: smp_ipi_demux_relaxed()
| 105: smp_muxed_ipi_set_message():
| 105: smb_mb()
| 105: message[CALL_FUNCTION] = 1
| 105: doorbell_global_ipi(42):
| 105: kvmppc_set_host_ipi(42, 1)
| // RE-ORDERED STORE COMPLETES
-> 42: kvmppc_set_host_ipi(42, 0)
42: // returns to executing guest
105: ppc_msgsnd_sync()/smp_mb()
105: ppc_msgsnd() -> 42
42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
105: // hangs waiting on 42 to process messages/call_single_queue
Fixing this scenario would require an smp_mb() *after* clearing
host_ipi flag in kvmppc_set_host_ipi() to order the store vs.
subsequent processing of IPI messages.
To handle both cases, this patch splits kvmppc_set_host_ipi() into
separate set/clear functions, where we execute smp_mb() prior to
setting host_ipi flag, and after clearing host_ipi flag. These
functions pair with each other to synchronize the sender and receiver
sides.
With that change in place the above workload ran for 20 hours without
triggering any lock-ups.
Fixes: 755563bc79c7 ("powerpc/powernv: Fixes for hypervisor doorbell handling") # v4.0
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190911223155.16045-1-mdroth@linux.vnet.ibm.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
"This is a bit late, partly due to me travelling, and partly due to a
power outage knocking out some of my test systems *while* I was
travelling.
- Initial support for running on a system with an Ultravisor, which
is software that runs below the hypervisor and protects guests
against some attacks by the hypervisor.
- Support for building the kernel to run as a "Secure Virtual
Machine", ie. as a guest capable of running on a system with an
Ultravisor.
- Some changes to our DMA code on bare metal, to allow devices with
medium sized DMA masks (> 32 && < 59 bits) to use more than 2GB of
DMA space.
- Support for firmware assisted crash dumps on bare metal (powernv).
- Two series fixing bugs in and refactoring our PCI EEH code.
- A large series refactoring our exception entry code to use gas
macros, both to make it more readable and also enable some future
optimisations.
As well as many cleanups and other minor features & fixups.
Thanks to: Adam Zerella, Alexey Kardashevskiy, Alistair Popple, Andrew
Donnellan, Aneesh Kumar K.V, Anju T Sudhakar, Anshuman Khandual,
Balbir Singh, Benjamin Herrenschmidt, Cédric Le Goater, Christophe
JAILLET, Christophe Leroy, Christopher M. Riedl, Christoph Hellwig,
Claudio Carvalho, Daniel Axtens, David Gibson, David Hildenbrand,
Desnes A. Nunes do Rosario, Ganesh Goudar, Gautham R. Shenoy, Greg
Kurz, Guerney Hunt, Gustavo Romero, Halil Pasic, Hari Bathini, Joakim
Tjernlund, Jonathan Neuschafer, Jordan Niethe, Leonardo Bras, Lianbo
Jiang, Madhavan Srinivasan, Mahesh Salgaonkar, Mahesh Salgaonkar,
Masahiro Yamada, Maxiwell S. Garcia, Michael Anderson, Nathan
Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas Piggin, Oliver
O'Halloran, Qian Cai, Ram Pai, Ravi Bangoria, Reza Arbab, Ryan Grimm,
Sam Bobroff, Santosh Sivaraj, Segher Boessenkool, Sukadev Bhattiprolu,
Thiago Bauermann, Thiago Jung Bauermann, Thomas Gleixner, Tom
Lendacky, Vasant Hegde"
* tag 'powerpc-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (264 commits)
powerpc/mm/mce: Keep irqs disabled during lockless page table walk
powerpc: Use ftrace_graph_ret_addr() when unwinding
powerpc/ftrace: Enable HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
ftrace: Look up the address of return_to_handler() using helpers
powerpc: dump kernel log before carrying out fadump or kdump
docs: powerpc: Add missing documentation reference
powerpc/xmon: Fix output of XIVE IPI
powerpc/xmon: Improve output of XIVE interrupts
powerpc/mm/radix: remove useless kernel messages
powerpc/fadump: support holes in kernel boot memory area
powerpc/fadump: remove RMA_START and RMA_END macros
powerpc/fadump: update documentation about option to release opalcore
powerpc/fadump: consider f/w load area
powerpc/opalcore: provide an option to invalidate /sys/firmware/opal/core file
powerpc/opalcore: export /sys/firmware/opal/core for analysing opal crashes
powerpc/fadump: update documentation about CONFIG_PRESERVE_FA_DUMP
powerpc/fadump: add support to preserve crash data on FADUMP disabled kernel
powerpc/fadump: improve how crashed kernel's memory is reserved
powerpc/fadump: consider reserved ranges while releasing memory
powerpc/fadump: make crash memory ranges array allocation generic
...
|
|
Convert the spufs filesystem to the new internal mount API as the old
one will be obsoleted and removed. This allows greater flexibility in
communication of mount parameters between userspace, the VFS and the
filesystem.
See Documentation/filesystems/mount_api.txt for more information.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeremy Kerr <jk@ozlabs.org>
cc: Arnd Bergmann <arnd@arndb.de>
cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
With support to copy multiple kernel boot memory regions owing to copy
size limitation, also handle holes in the memory area to be preserved.
Support as many as 128 kernel boot memory regions. This allows having
an adequate FADump capture kernel size for different scenarios.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821385448.5656.6124791213910877759.stgit@hbathini.in.ibm.com
|
|
RMA_START is defined as '0' and there is even a BUILD_BUG_ON() to
make sure it is never anything else. Remove this macro and use '0'
instead as code change is needed anyway when it has to be something
else. Also, remove unused RMA_END macro.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821384096.5656.15026984053970204652.stgit@hbathini.in.ibm.com
|
|
OPAL loads kernel & initrd at 512MB offset (256MB size), also exported
as ibm,opal/dump/fw-load-area. So, if boot memory size of FADump is
less than 768MB, kernel memory to be exported as '/proc/vmcore' would
be overwritten by f/w while loading kernel & initrd. To avoid such a
scenario, enforce a minimum boot memory size of 768MB on OPAL platform
and skip using FADump if a newer F/W version loads kernel & initrd
above 768MB.
Also, irrespective of RMA size, set the minimum boot memory size
expected on pseries platform at 320MB. This is to avoid inflating the
minimum memory requirements on systems with 512M/1024M RMA size.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/156821381414.5656.1592867278535469652.stgit@hbathini.in.ibm.com
|
| |