summaryrefslogtreecommitdiffstats
path: root/arch/mips
AgeCommit message (Collapse)Author
2015-02-17MIPS: Add LLB bit and related feature for the Config 5 CP0 registerMarkos Chandras
The LLBIT (bit 4) in the Config5 CP0 register indicates the software availability of the Load-Linked bit. This bit is only set by hardware and it has the following meaning: 0: LLB functionality is not supported 1: LLB functionality is supported. The following feature are also supported: - ERETNC instruction. Similar to ERET but it does not clear the LLB bit in the LLAddr register. - CP0 LLAddr/LLB bit must be set - LLbit is software accessible through the LLAddr[0] This will be used later on to emulate R2 LL/SC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BNEZC and JIALC instructionsMarkos Chandras
MIPS R6 uses the <R6 sdc2 opcode for the new BNEZC and JIALC instructions Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BEQZC and JIC instructionsMarkos Chandras
MIPS R6 uses the <R6 ldc2 opcode for the new BEQZC and JIC instructions Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BALC instructionMarkos Chandras
MIPS R6 uses the <R6 swc2 opcode for the new BALC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BNVC, BNEC and BNEZLAC instructionsMarkos Chandras
MIPS R6 uses the <R6 DADDI opcode for the new BNVC, BNEC and BNEZLAC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 BOVC, BEQC and BEQZALC instructionsMarkos Chandras
MIPS R6 uses the <R6 ADDI opcode for the new BOVC, BEQC and BEQZALC instructions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 branch compact (BC) instructionMarkos Chandras
MIPS R6 uses the <R6 LWC2 opcode for the new BC instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 B{L,G}T{Z,}{AL,}C instructionsMarkos Chandras
MIPS R6 added the following four instructions which share the BGTZ and BGTZL opcode: BLTZALC: Compact branch-and-link if GPR rt is < to zero BGTZALC: Compact branch-and-link if GPR rt is > to zero BLTZL : Compact branch if GPR rt is < to zero BGTZL : Compact branch if GPR rt is > to zero BLTC : Compact branch if GPR rs is less than GPR rt BLTUC : Similar to BLTC but unsigned Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the new MIPS R6 B{L,G}Ε{Z,}{AL,}C instructionsMarkos Chandras
MIPS R6 added the following four instructions which share the BLEZ and BLEZL opcodes: BLEZALC: Compact branch-and-link if GPR rt is <= to zero BGEZALC: Compact branch-and-link if GPR rt is >= to zero BLEZC : Compact branch if GPR rt is <= to zero BGEZC : Compact branch if GPR rt is >= to zero BGEC : Compact branch if GPR rs is less than or equal to GPR rt BGEUC : Similar to BGEC but unsigned. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Emulate the BC1{EQ,NE}Z FPU instructionsMarkos Chandras
MIPS R6 introduced the following two branch instructions for COP1: BC1EQZ: Branch if Cop1 (FPR) Register Bit 0 is Equal to Zero BC1NEZ: Branch if Cop1 (FPR) Register Bit 0 is Not Equal to Zero Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: branch: Do not emulate the branch likelies on MIPS R6Markos Chandras
MIPS R6 removed the BLTZL, BGEZL, BLTZAL, BGEZAL, BEQL, BNEL, BLEZL, BGTZL branch likely instructions so we must not try to emulate them on MIPS R6 if the R2-to-R6 emulator is not present. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: Prepare the JR instruction for emulation on MIPS R6Markos Chandras
The MIPS R6 JR instruction is an alias to the JALR one, so it may need emulation for non-R6 userlands. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: mm: scache: Add secondary cache support for MIPS R6 coresMarkos Chandras
The secondary cache initialization and configuration code is processor specific so we need to handle MIPS R6 cores as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: mm: c-r4k: Set the correct ISA levelMarkos Chandras
The local_r4k_flush_cache_sigtramp function uses the 'cache' instruction inside an asm block. However, MIPS R6 changed the opcode for the cache instruction and as a result of which we need to set the correct ISA level. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: mm: tlbex: Use cpu_has_mips_r2_exec_hazard for the EHB instructionLeonid Yegoshin
MIPS uses the cpu_has_mips_r2_exec_hazard macro to determine whether the EHB instruction is available or not. This is necessary for MIPS R6 which also supports the EHB instruction. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: mm: page: Add MIPS R6 supportMarkos Chandras
The MIPS R6 pref instruction only has 9 bits for the immediate field so skip the micro-assembler PREF instruction if the offset does not fit in 9 bits. Moreover, bit 30 (Pref_PrepareForStore) is no longer valid in MIPS R6, so we change the default for all MIPS R6 processors to bit 5 (Pref_StoreStreamed). Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: lib: memset: Add MIPS R6 supportLeonid Yegoshin
MIPS R6 dropped the unaligned load and store instructions so we need to re-write this part of the code for R6 to store one byte at a time. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: lib: memcpy: Add MIPS R6 supportLeonid Yegoshin
MIPS R6 does not support the unaligned load and store instructions so we add a special MIPS R6 case to copy one byte at a time if we need to read/write to unaligned memory addresses. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: syscall: Set the appropriate ISA level for MIPS R6Markos Chandras
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the appropriate ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: unaligned: Add support for the MIPS R6Leonid Yegoshin
The load/store unaligned instructions have been removed in MIPS R6 so we need to re-implement the related macros using the regular load/store instructions. Moreover, the load/store from coprocessor 2 instructions have been reallocated in Release 6 so we will handle them in the emulator instead. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: cps-vec: Replace "addi" with "addiu"Markos Chandras
The "addi" instruction will trap on overflows which is not something we need in this code, so we replace that with "addiu". Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00430.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Cc: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: genex: Set correct ISA levelMarkos Chandras
The jr instruction opcode has changed in R6 so make sure the correct ISA level is set prior using that instruction. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: r4k_fpu: Add support for MIPS R6Leonid Yegoshin
Add the MIPS R6 related preprocessor definitions for FPU signal related functions. MIPS R6 only has FR=1 so avoid checking that bit on the C0/Status register. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: r4k_switch: Add support for MIPS R6Leonid Yegoshin
Add the MIPS R6 related preprocessor definitions for save/restore FPU related functions. We also set the appropriate ISA level so the final return instruction "jr ra" will produce the correct opcode on R6. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: traps: Add MIPS R6 related definitionsLeonid Yegoshin
Add MIPS R6 support to cache and ftlb exceptions, as well as to the hwrena and ebase register configuration. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: proc: Add MIPS R6 support to /proc/cpuinfoMarkos Chandras
Print 'mips64r6' and/or 'mips32r6' if the kernel is running on a MIPS R6 core. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: entry.S: Add MIPS R6 related definitionsMarkos Chandras
The instruction hazard barrier in the form of: jr.hb ra nop is valid on MIPS R6 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: cpu-probe.c: Add support for MIPS R6Leonid Yegoshin
Add MIPS R6 support when decoding the config0 c0 register. Also add MIPS R6 support when examining the ebase c0 register to get the core number and when getting the shadow set number from the srsctl c0 register. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: cevt-r4k: Add MIPS R6 to the c0_compare_interrupt handlerLeonid Yegoshin
Just like MIPS R2, in MIPS R6 it is possible to determine if a timer interrupt has happened or not. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: kernel: cpu-bugs64: Do not check R6 cores for existing 64-bit bugsLeonid Yegoshin
The current HW bugs checked in cpu-bugs64, do not apply to R6 cores and they cause compilation problems due to removed <R6 instructions, so do not check for them for the time being. Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: local: Set the appropriate ISA level for MIPS R6Markos Chandras
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the appropriate ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: spinlock: Replace "sub" instruction with "addiu"Markos Chandras
"sub $reg, imm" is not a real MIPS instruction. The assembler can replace that with "addi $reg, -imm". However, addi has been removed from R6, so we replace the "sub" instruction with the "addiu" one. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: futex: Set the appropriate ISA level for MIPS R6Markos Chandras
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the appropriate ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: bitops: Update ISA constraints for MIPS R6 supportMarkos Chandras
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the correct ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: atomic: Update ISA constraints for MIPS R6 supportMarkos Chandras
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the correct ISA level. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: cmpxchg: Update ISA constraints for MIPS R6 supportMarkos Chandras
MIPS R6 changed the opcodes for LL/SC instructions so we need to set the correct ISA. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Use the new "ZC" constraint for MIPS R6Markos Chandras
GCC versions supporting MIPS R6 use the ZC constraint to enforce a 9-bit offset for MIPS R6. We will use that for all MIPS R6 LL/SC instructions. Cc: Matthew Fortune <Matthew.Fortune@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: Rename GCC_OFF12_ASM to GCC_OFF_SMALL_ASMMarkos Chandras
The GCC_OFF12_ASM macro is used for 12-bit immediate constrains but we will also use it for 9-bit constrains on MIPS R6 so we rename it to something more appropriate. Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: spram: Add new symbol for MIPS scratch pad storageMarkos Chandras
MIPS R6, just like MIPS R2, have scratch pad storage, so add a new symbol which is selected by MIPS R2 and R6. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00389.html Cc: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: r4kcache: Add MIPS R6 cache unroll functionsMarkos Chandras
MIPS R6 changed the 'cache' instruction opcode and reduced the offset field to 8 bits. This means we now have to adjust the base register every 256 bytes and as a result of which we can no longer use the previous cache functions. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: irqflags: Add MIPS R6 related definitionsMarkos Chandras
Add the MIPS R6 related definitions to the IRQ related macros Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: hazards: Add MIPSR6 definitionsMarkos Chandras
Add the MIPSR6 related definitions to MIPS hazards Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: cpu: Add MIPSR6 ISA definitionsLeonid Yegoshin
Add MIPS R6 to the ISA definitions Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: Use generic checksum functions for MIPS R6Markos Chandras
The following instructions have been removed from MIPS R6 ulw, ulh, swl, lwr, lwl, swr. However, all of them are used in the MIPS specific checksum implementation. As a result of which, we will use the generic checksum on MIPS R6 Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: asmmacro: Replace "add" instructions with "addu"Markos Chandras
The "add" instruction is actually a macro in binutils and depending on the size of the immediate it can expand to an "addi" instruction. However, the "addi" instruction traps on overflows which is not something we want on address calculation. Link: http://www.linux-mips.org/archives/linux-mips/2015-01/msg00121.html Cc: Paul Burton <paul.burton@imgtec.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: asmmacro: Add MIPS R6 support to the simple EI/DI variantsLeonid Yegoshin
EI/DI instructions are available in MIPS R6 so add the needed definitions. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: stackframe: Do not preserve the HI/LO registers on MIPS R6Leonid Yegoshin
The HI/LO registers have been removed from MIPS R6. Instructions such as MULT and DIV have been replaced with a new pair of instructions for the HI/LO operations for example: MULT -> MUL, MUH DIV -> DIV, MOD So we avoid preserving the pre-R6 HI/LO registers in MIPS R6 Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: module: define MODULE_PROC_FAMILY for MIPS R6Leonid Yegoshin
Define the MODULE_PROC_FAMILY for the MIPS R6 ISA. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-17MIPS: asm: compiler: Add new macros to set ISA and arch asm annotationsMarkos Chandras
There are certain places where the code uses .set mips32 or .set mips64 or .set arch=r4000. In preparation of MIPS R6 support, and in order to use as less #ifdefs as possible, we define new macros to set similar annotations for MIPS R6. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
2015-02-16MIPS: mm: Add MIPS R6 instruction encodingsLeonid Yegoshin
MIPS R6 defines new opcodes for ll, sc, cache and pref instructions so we need to take these into consideration in the micro-assembler. Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-22 08:46:57 +0000