Age | Commit message (Collapse) | Author |
|
Replace __get_cpu_var uses for address calculation with this_cpu_ptr().
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull metag architecture updates from James Hogan:
"Just a couple of minor static analysis fixes, removal of a NULL check
that should never happen, and fix an error check where an unsigned
value was being checked to see if it was negative"
* tag 'metag-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
metag: cachepart: Fix failure check
metag: hugetlbpage: Remove null pointer checks that could never happen
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc
Pull arch signal handling cleanup from Richard Weinberger:
"This patch series moves all remaining archs to the get_signal(),
signal_setup_done() and sigsp() functions.
Currently these archs use open coded variants of the said functions.
Further, unused parameters get removed from get_signal_to_deliver(),
tracehook_signal_handler() and signal_delivered().
At the end of the day we save around 500 lines of code."
* 'signal-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/misc: (43 commits)
powerpc: Use sigsp()
openrisc: Use sigsp()
mn10300: Use sigsp()
mips: Use sigsp()
microblaze: Use sigsp()
metag: Use sigsp()
m68k: Use sigsp()
m32r: Use sigsp()
hexagon: Use sigsp()
frv: Use sigsp()
cris: Use sigsp()
c6x: Use sigsp()
blackfin: Use sigsp()
avr32: Use sigsp()
arm64: Use sigsp()
arc: Use sigsp()
sas_ss_flags: Remove nested ternary if
Rip out get_signal_to_deliver()
Clean up signal_delivered()
tracehook_signal_handler: Remove sig, info, ka and regs
...
|
|
Use sigsp() instead of the open coded variant.
Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: James Hogan <james.hogan@imgtec.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf changes from Ingo Molnar:
"Kernel side changes:
- Consolidate the PMU interrupt-disabled code amongst architectures
(Vince Weaver)
- misc fixes
Tooling changes (new features, user visible changes):
- Add support for pagefault tracing in 'trace', please see multiple
examples in the changeset messages (Stanislav Fomichev).
- Add pagefault statistics in 'trace' (Stanislav Fomichev)
- Add header for columns in 'top' and 'report' TUI browsers (Jiri
Olsa)
- Add pagefault statistics in 'trace' (Stanislav Fomichev)
- Add IO mode into timechart command (Stanislav Fomichev)
- Fallback to syscalls:* when raw_syscalls:* is not available in the
perl and python perf scripts. (Daniel Bristot de Oliveira)
- Add --repeat global option to 'perf bench' to be used in benchmarks
such as the existing 'futex' one, that was modified to use it
instead of a local option. (Davidlohr Bueso)
- Fix fd -> pathname resolution in 'trace', be it using /proc or a
vfs_getname probe point. (Arnaldo Carvalho de Melo)
- Add suggestion of how to set perf_event_paranoid sysctl, to help
non-root users trying tools like 'trace' to get a working
environment. (Arnaldo Carvalho de Melo)
- Updates from trace-cmd for traceevent plugin_kvm plus args cleanup
(Steven Rostedt, Jan Kiszka)
- Support S/390 in 'perf kvm stat' (Alexander Yarygin)
Tooling infrastructure changes:
- Allow reserving a row for header purposes in the hists browser
(Arnaldo Carvalho de Melo)
- Various fixes and prep work related to supporting Intel PT (Adrian
Hunter)
- Introduce multiple debug variables control (Jiri Olsa)
- Add callchain and additional sample information for python scripts
(Joseph Schuchart)
- More prep work to support Intel PT: (Adrian Hunter)
- Polishing 'script' BTS output
- 'inject' can specify --kallsym
- VDSO is per machine, not a global var
- Expose data addr lookup functions previously private to 'script'
- Large mmap fixes in events processing
- Include standard stringify macros in power pc code (Sukadev
Bhattiprolu)
Tooling cleanups:
- Convert open coded equivalents to asprintf() (Andy Shevchenko)
- Remove needless reassignments in 'trace' (Arnaldo Carvalho de Melo)
- Cache the is_exit syscall test in 'trace) (Arnaldo Carvalho de
Melo)
- No need to reimplement err() in 'perf bench sched-messaging', drop
barf(). (Davidlohr Bueso).
- Remove ev_name argument from perf_evsel__hists_browse, can be
obtained from the other parameters. (Jiri Olsa)
Tooling fixes:
- Fix memory leak in the 'sched-messaging' perf bench test.
(Davidlohr Bueso)
- The -o and -n 'perf bench mem' options are mutually exclusive, emit
error when both are specified. (Davidlohr Bueso)
- Fix scrollbar refresh row index in the ui browser, problem exposed
now that headers will be added and will be allowed to be switched
on/off. (Jiri Olsa)
- Handle the num array type in python properly (Sebastian Andrzej
Siewior)
- Fix wrong condition for allocation failure (Jiri Olsa)
- Adjust callchain based on DWARF debug info on powerpc (Sukadev
Bhattiprolu)
- Fix a risk for doing free on uninitialized pointer in traceevent
lib (Rickard Strandqvist)
- Update attr test with PERF_FLAG_FD_CLOEXEC flag (Jiri Olsa)
- Enable close-on-exec flag on perf file descriptor (Yann Droneaud)
- Fix build on gcc 4.4.7 (Arnaldo Carvalho de Melo)
- Event ordering fixes (Jiri Olsa)"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (123 commits)
Revert "perf tools: Fix jump label always changing during tracing"
perf tools: Fix perf usage string leftover
perf: Check permission only for parent tracepoint event
perf record: Store PERF_RECORD_FINISHED_ROUND only for nonempty rounds
perf record: Always force PERF_RECORD_FINISHED_ROUND event
perf inject: Add --kallsyms parameter
perf tools: Expose 'addr' functions so they can be reused
perf session: Fix accounting of ordered samples queue
perf powerpc: Include util/util.h and remove stringify macros
perf tools: Fix build on gcc 4.4.7
perf tools: Add thread parameter to vdso__dso_findnew()
perf tools: Add dso__type()
perf tools: Separate the VDSO map name from the VDSO dso name
perf tools: Add vdso__new()
perf machine: Fix the lifetime of the VDSO temporary file
perf tools: Group VDSO global variables into a structure
perf session: Add ability to skip 4GiB or more
perf session: Add ability to 'skip' a non-piped event stream
perf tools: Pass machine to vdso__dso_findnew()
perf tools: Add dso__data_size()
...
|
|
Nothing sets function_trace_stop to disable function tracing anymore.
Remove the check for it in the arch code.
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
[linux-3.16-rc5/arch/metag/kernel/cachepart.c:102]: (style) Checking if
unsigned variable 'thread_cache_size' is less than zero.
Source code is
if (thread_cache_size < 0)
pr_emerg("Can't read %s cache size\n",
cache_type ? "DCACHE" : "ICACHE");
but
unsigned int thread_cache_size;
Function get_thread_cache_size returns an error code
as (unsigned int) -1.
Change get_thread_cache_size() to return signed int, and its result is
stored into signed int variable.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80361
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Transition to using the new generic PERF_PMU_CAP_NO_INTERRUPT method for
failing a sampling event when no PMU interrupt is available.
Signed-off-by: Vince Weaver <vincent.weaver@maine.edu>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linux-metag@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1406150202050.16738@vincent-weaver-1.umelst.maine.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Unify the various architectures __dtb_start and __dtb_end definitions
moving them into of_fdt.h.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux@lists.openrisc.net
Cc: linux-xtensa@linux-xtensa.org
Tested-by: Grant Likely <grant.likely@linaro.org>
Tested-by: Stephen Chivers <schivers@csc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"Most of the changes were largely clean ups, and some documentation.
But there were a few features that were added:
Uprobes now work with event triggers and multi buffers and have
support under ftrace and perf.
The big feature is that the function tracer can now be used within the
multi buffer instances. That is, you can now trace some functions in
one buffer, others in another buffer, all functions in a third buffer
and so on. They are basically agnostic from each other. This only
works for the function tracer and not for the function graph trace,
although you can have the function graph tracer running in the top
level buffer (or any tracer for that matter) and have different
function tracing going on in the sub buffers"
* tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
tracing: Add BUG_ON when stack end location is over written
tracepoint: Remove unused API functions
Revert "tracing: Move event storage for array from macro to standalone function"
ftrace: Constify ftrace_text_reserved
tracepoints: API doc update to tracepoint_probe_register() return value
tracepoints: API doc update to data argument
ftrace: Fix compilation warning about control_ops_free
ftrace/x86: BUG when ftrace recovery fails
ftrace: Warn on error when modifying ftrace function
ftrace: Remove freelist from struct dyn_ftrace
ftrace: Do not pass data to ftrace_dyn_arch_init
ftrace: Pass retval through return in ftrace_dyn_arch_init()
ftrace: Inline the code from ftrace_dyn_table_alloc()
ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt
tracing: Evaluate len expression only once in __dynamic_array macro
tracing: Correctly expand len expressions from __dynamic_array macro
tracing/module: Replace include of tracepoint.h with jump_label.h in module.h
tracing: Fix event header migrate.h to include tracepoint.h
tracing: Fix event header writeback.h to include tracepoint.h
tracing: Warn if a tracepoint is not set via debugfs
...
|
|
Use the more generic functions get_signal() signal_setup_done()
for signal delivery.
[James Hogan: avoid reordering get_signal() and restart check.]
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
There is no point in having an incomplete copy of irq_set_affinity()
for the hotplug irq migration code.
Use the core function instead and while at it switch to
for_each_active_irq()
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: metag <linux-metag@vger.kernel.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
As the data parameter is not really used by any ftrace_dyn_arch_init,
remove that from ftrace_dyn_arch_init. This also removes the addr
local variable from ftrace_init which is now unused.
Note the documentation was imprecise as it did not suggest to set
(*data) to 0.
Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any
way, it just sets the value to 0. And this is used as a return value
in the caller -- ftrace_init, which just checks the retval against
zero.
Note there is also "return 0" in every ftrace_dyn_arch_init. So it is
enough to check the retval and remove all the indirect sets of data on
all archs.
Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz
Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
|
|
boot_secondary() is not used outside arch/metag/kernel/smp.c, hence make it
static.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
We need to export 'cpu_core_map' since the topology_core_cpumask macro
refers to it and is used by certain kernel modules.
Found in allmodconfig build:
ERROR: "cpu_core_map" [drivers/staging/lustre/lustre/libcfs/libcfs.ko] undefined!
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Commit 9a46ad6d6df3 "smp: make smp_call_function_many() use logic
similar to smp_call_function_single()" has unified the way to handle
single and multiple cross-CPU function calls. Now only one interrupt is
needed for architecture specific code to support generic SMP function
call interfaces, so kill the redundant single function call interrupt.
Signed-off-by: Jiang Liu <liuj97@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Kosina <trivial@kernel.org>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Since commit f6b30d32d242 (metag: kick: add missing irq_enter/exit to
kick_handler()), the main kick_handler() function deals with setting and
restoring the irq registers pointer. Therefore do_IPI() which is called
indirectly from kick_handler() doesn't need to do that itself any
longer. Therefore remove that code and do_IPI()'s pt_regs argument.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
Meta has 2 levels of page table so the pmd folds into the pud which
folds into the pgd. Therefore the !pmd check in dma_alloc_init() is dead
code since it essentially checks whether:
(init_mm->pgd + 0x770) == 0
Remove the check.
Reported-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Use __free_reserved_page() to simplify the code in arch.
It used split_page() in consistent_alloc()/__dma_alloc_coherent()/dma_alloc_coherent(),
so page->_count == 1, and we can free it safely.
__free_reserved_page()
ClearPageReserved()
init_page_count() // it won't change the value
__free_page()
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DeviceTree updates for 3.13. This is a bit larger pull request than
usual for this cycle with lots of clean-up.
- Cross arch clean-up and consolidation of early DT scanning code.
- Clean-up and removal of arch prom.h headers. Makes arch specific
prom.h optional on all but Sparc.
- Addition of interrupts-extended property for devices connected to
multiple interrupt controllers.
- Refactoring of DT interrupt parsing code in preparation for
deferred probe of interrupts.
- ARM cpu and cpu topology bindings documentation.
- Various DT vendor binding documentation updates"
* tag 'devicetree-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (82 commits)
powerpc: add missing explicit OF includes for ppc
dt/irq: add empty of_irq_count for !OF_IRQ
dt: disable self-tests for !OF_IRQ
of: irq: Fix interrupt-map entry matching
MIPS: Netlogic: replace early_init_devtree() call
of: Add Panasonic Corporation vendor prefix
of: Add Chunghwa Picture Tubes Ltd. vendor prefix
of: Add AU Optronics Corporation vendor prefix
of/irq: Fix potential buffer overflow
of/irq: Fix bug in interrupt parsing refactor.
of: set dma_mask to point to coherent_dma_mask
of: add vendor prefix for PHYTEC Messtechnik GmbH
DT: sort vendor-prefixes.txt
of: Add vendor prefix for Cadence
of: Add empty for_each_available_child_of_node() macro definition
arm/versatile: Fix versatile irq specifications.
of/irq: create interrupts-extended property
microblaze/pci: Drop PowerPC-ism from irq parsing
of/irq: Create of_irq_parse_and_map_pci() to consolidate arch code.
of/irq: Use irq_of_parse_and_map()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull metag architecture changes from James Hogan:
- A change to remove the last dependence on bootloader exception
handlers so that QEMU can more easily boot an SMP Linux/Meta kernel
image directly.
- A fix for a minor off by one error in a BUG_ON condition found by Dan
Carpenter.
* tag 'metag-for-v3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
metag: off by one in setup_bootmem_node()
metag: handle low level kicks directly
|
|
Kick interrupts trigger the LWK (low level kick) signal, usually handled
by the __TBIDoStdLWK() function which is the only handler inherited from
the bootloader. The LWK signal is converted either to a SWK (plain
software kick) or a SWS (software kick with an attached message).
Linux has kick_handler() to handle SWK and call registered kick handlers
(IPIs and inter-thread comms), but SWS is as far as I'm aware unused
with Linux.
Therefore remove that abstraction and have Linux handle LWK directly.
This will reduce kick latency slightly, and reduce our dependence on the
bootloader, which makes it easier to directly boot a kernel in QEMU
(particularly for SMP).
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Move setup_machine_fdt out of prom.h and into asm/setup.h in preparation
to remove prom.h.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
|
|
Convert metag to use the common of_flat_dt_get_machine_name function.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
[james.hogan: fix missing arch_get_next_mach and const mismatch]
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Convert metag to use new early_init_dt_scan function.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: James Hogan <james.hogan@imgtec.com>
|
|
Use the common unflatten_and_copy_device_tree to copy the built-in FDT
out of init section.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: James Hogan <james.hogan@imgtec.com>
|
|
All arch overriden implementations of do_softirq() share the following
common code: disable irqs (to avoid races with the pending check),
check if there are softirqs pending, then execute __do_softirq() on
a specific stack.
Consolidate the common parts such that archs only worry about the
stack switch.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Mackerras <paulus@au1.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
|
|
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications. For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.
After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out. Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.
Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings. In any case, they are temporary and harmless.
This removes all the arch/metag uses of the __cpuinit macros from
all C files. Currently metag does not have any __CPUINIT used in
assembly files.
[1] https://lkml.org/lkml/2013/5/20/589
Cc: James Hogan <james.hogan@imgtec.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull Metag architecture changes from James Hogan:
- Infrastructure and DT files for TZ1090 SoC (pin control drivers
already merged via pinctrl tree).
- Panic on boot instead of just warning if cache aliasing possible.
- Various SMP/hotplug fixes.
- Various other randconfig/sparse fixes.
* tag 'metag-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag: (24 commits)
metag: move EXPORT_SYMBOL(csum_partial) to metag_ksyms.c
metag: cpu hotplug: route_irq: preserve irq mask
metag: kick: add missing irq_enter/exit to kick_handler()
metag: smp: don't spin waiting for CPU to start
metag: smp: enable irqs after set_cpu_online
metag: use clear_tasks_mm_cpumask()
metag: tz1090: select and instantiate pinctrl-tz1090-pdc
metag: tz1090: select and instantiate pinctrl-tz1090
metag: don't check for cache aliasing on smp cpu boot
metag: panic if cache aliasing possible
metag: *.dts: include using preprocessor
metag: add <dt-bindings/> symlink
metag/.gitignore: Extend the *.dtb pattern to match the dtb.S files
metag/traps: include setup.h for the per_cpu_trap_init declaration
metag/traps: Mark die() as __noreturn to match the declaration.
metag/processor.h: Add missing cpuinfo_op declaration.
metag/setup: Restrict scope for the capabilities variable
metag/mm/cache: Restrict scope for metag_lnkget_probe
metag/asm/irq.h: Declare init_IRQ
metag/kernel/irq.c: Declare root_domain as static
...
|
|
Move EXPORT_SYMBOL(csum_partial) from lib/checksum.c into metag_ksyms.c
so that it doesn't get omitted by the static linker if it's not used by
any other statically linked code, which can result in undefined symbols
when building modules.
For example a randconfig caused the following error:
ERROR: "csum_partial" [fs/reiserfs/reiserfs.ko] undefined!
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
The route_irq() function needs to preserve the irq mask by using the
_irqsave/irqrestore variants of raw spin lock functions instead of the
_irq variants. This is because it is called from __cpu_disable() (via
migrate_irqs()), which is called with IRQs disabled, so using the _irq
variants re-enables IRQs.
This appears to have been causing occasional hits of the
BUG_ON(!irqs_disabled()) in __irq_work_run() during CPU hotplug soak
testing:
BUG: failure at kernel/irq_work.c:122/__irq_work_run()!
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
|
|
kick_handler() doesn't have an irq_enter/exit pair, but it's used for
handling SMP IPIs which require work to be done in softirqs, which are
invoked from irq_exit() when the hard irq nest count reaches 0.
The scheduler_ipi() callback in the IPI handler calls irq_enter/exit
itself, but this is inside kick_handler()'s spin lock critical section,
so if an invoked softirq issues an IPI the kick_handler() will be
re-entered on the same CPU and will deadlock.
This is easily fixed by adding the missing irq_enter/exit to
kick_handler() so that the hard irq nest count doesn't reach 0 until
after the spin lock has been released.
Ideally the spin lock protected handler list will also be replaced by a
lockless RCU protected list since it is certainly mostly read. That can
be done in a later change though.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Use a completion to block until a secondary CPU has started up, like ARM
do, instead of a loop of udelays.
On Meta, SMP is really SMT, with each "CPU" being a different hardware
thread on the same Meta processor core, so as well as being more
efficient and latency friendly, using a completion prevents the bogomips
of the secondary CPU from being drastically skewed every time by the
execution of the tight in-cache udelay loop on the other CPU.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
|
|
In secondary_start_kernel() interrupts should be enabled with
local_irq_enable() after the cpu is marked as online with
set_cpu_online(). Otherwise it's possible for a timer interrupt to
trigger a softirq, which if the cpu is marked as offline may have it's
affinity altered.
Reported-by: Kirill Tkhai <tkhai@yandex.ru>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Kirill Tkhai <tkhai@yandex.ru>
|
|
Checking for process->mm is not enough because process' main thread may
exit or detach its mm via use_mm(), but other threads may still have a
valid mm.
To fix this we would need to use find_lock_task_mm(), which would walk
up all threads and returns an appropriate task (with task lock held).
clear_tasks_mm_cpumask() was introduced in v3.5-rc1 to fix this issue,
so let's use it for metag too.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Anton Vorontsov <anton.vorontsov@linaro.org>
|
|
The cache configuration of the boot cpu is now duplicated to secondary
cpus, so there's no need to check for cache aliasing again when a
secondary cpu is booted. Therefore remove the check from
secondary_start_kernel().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
If the cache and page size configuration allows for cache aliasing to
occur we warn on boot, but the log messages are easy to miss and will
result is random crashes occuring in userland. Let's panic too in this
case so that the user immediately knows they need to fix the cache
configuration or configured page size.
Also fix the warning messages which display the cache and page sizes to
include newlines, and add the word "Potential" since an actual cache
alias hasn't been detected.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
This allows us to use pdev->name for registering a PMU device.
IMO the name is not supposed to be changed anyway.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1370339148-5566-1-git-send-email-mjonker@synopsys.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
It is only referenced within the irq.c file, so restrict it's scope
as appropriate.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
|
|
Log core clock and Meta timer frequencies during init in architecture
generic code, removing the need for equivalent log messages in SoC
specific code.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
|
|
If the common clock framework is enabled, call of_clk_init(NULL) in
time_init() to register device tree clocks with the clock framework.
After this time_init() calls a new function init_metag_clocks(), which
looks for a clock named "core" in the node compatible with "img,meta"
(usually the root node). If found the get_core_freq machine callback is
overridden to obtain the core clock frequency using that clock.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: devicetree-discuss@lists.ozlabs.org
|
|
If no init_machine callback is provided, call of_platform_populate()
instead. This allows a board/SoC that only needs to call
of_platform_populate to omit the callback altogether.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: devicetree-discuss@lists.ozlabs.org
|
|
show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms. This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.
show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.
* Archs which didn't print debug info now do.
alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
um, xtensa
* Already prints debug info. Replaced with show_regs_print_info().
The printed information is superset of what used to be there.
arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86
* s390 is special in that it used to print arch-specific information
along with generic debug info. Heiko and Martin think that the
arch-specific extra isn't worth keeping s390 specfic implementation.
Converted to use the generic version.
Note that now all archs print the debug info before actual register
dumps.
An example BUG() dump follows.
kernel BUG at /work/os/work/kernel/workqueue.c:4841!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
Hardware name: empty empty/S3992, BIOS 080011 10/26/2007
task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6
RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246
RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Stack:
ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
Call Trace:
[<ffffffff81000312>] do_one_initcall+0x122/0x170
[<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8
[<ffffffff81c47760>] ? rest_init+0x140/0x140
[<ffffffff81c4776e>] kernel_init+0xe/0xf0
[<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0
[<ffffffff81c47760>] ? rest_init+0x140/0x140
...
v2: Typo fix in x86-32.
v3: CPU number dropped from show_regs_print_info() as
dump_stack_print_info() has been updated to print it. s390
specific implementation dropped as requested by s390 maintainers.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [tile bits]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Both dump_stack() and show_stack() are currently implemented by each
architecture. show_stack(NULL, NULL) dumps the backtrace for the
current task as does dump_stack(). On some archs, dump_stack() prints
extra information - pid, utsname and so on - in addition to the
backtrace while the two are identical on other archs.
The usages in arch-independent code of the two functions indicate
show_stack(NULL, NULL) should print out bare backtrace while
dump_stack() is used for debugging purposes when something went wrong,
so it does make sense to print additional information on the task which
triggered dump_stack().
There's no reason to require archs to implement two separate but mostly
identical functions. It leads to unnecessary subtle information.
This patch expands the dummy fallback dump_stack() implementation in
lib/dump_stack.c such that it prints out debug information (taken from
x86) and invokes show_stack(NULL, NULL) and drops arch-specific
dump_stack() implementations in all archs except blackfin. Blackfin's
dump_stack() does something wonky that I don't understand.
Debug information can be printed separately by calling
dump_stack_print_info() so that arch-specific dump_stack()
implementation can still emit the same debug information. This is used
in blackfin.
This patch brings the following behavior changes.
* On some archs, an extra level in backtrace for show_stack() could be
printed. This is because the top frame was determined in
dump_stack() on those archs while generic dump_stack() can't do that
reliably. It can be compensated by inlining dump_stack() but not
sure whether that'd be necessary.
* Most archs didn't use to print debug info on dump_stack(). They do
now.
An example WARN dump follows.
WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505()
Hardware name: empty
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #9
0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48
ffffffff8108f50f ffffffff82228240 0000000000000040 ffffffff8234a03c
0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58
Call Trace:
[<ffffffff81c614dc>] dump_stack+0x19/0x1b
[<ffffffff8108f50f>] warn_slowpath_common+0x7f/0xc0
[<ffffffff8108f56a>] warn_slowpath_null+0x1a/0x20
[<ffffffff8234a071>] init_workqueues+0x35/0x505
...
v2: CPU number added to the generic debug info as requested by s390
folks and dropped the s390 specific dump_stack(). This loses %ksp
from the debug message which the maintainers think isn't important
enough to keep the s390-specific dump_stack() implementation.
dump_stack_print_info() is moved to kernel/printk.c from
lib/dump_stack.c. Because linkage is per objecct file,
dump_stack_print_info() living in the same lib file as generic
dump_stack() means that archs which implement custom dump_stack()
- at this point, only blackfin - can't use dump_stack_print_info()
as that will bring in the generic version of dump_stack() too. v1
The v1 patch broke build on blackfin due to this issue. The build
breakage was reported by Fengguang Wu.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits]
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag
Pull arch/metag update from James Hogan:
- Various fixes for the interrupting perf counter handling in metag's
perf backend.
- Add OProfile support based on perf.
- Sets up cache partitions for SMP so bootloader doesn't have to.
- Patch from Paul Bolle to remove ARCH_POPULATES_NODE_MAP again
(touches microblaze too).
- Add TLS pointer regset to metag ptrace api.
- Add exported metag DSP extended context handling header <asm/ech.h>.
- Increase defconfig log buffer size to 128KiB.
- Various fixes, typos, missing exports.
* tag 'metag-for-v3.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
metag: defconfigs: increase log buffer 8KiB => 128KiB
metag: avoid unnecessary builtin dtb rebuilds
metag: add exported <asm/ech.h> for extended context handling
metag: export _metag_da_present and cpu_2_hwthread_id
metag: ptrace: Implement NT_METAG_TLS
memblock: Kill ARCH_POPULATES_NODE_MAP once more
metag: cachepart: fix get_global_dcache_size() typo
metag: cachepart: take into account small cache bits
metag: smp: copy cache partition and enable GCOn
metag: OProfile support
metag: perf: prepare for use by oprofile
metag: perf: don't reset TXTACTCYC
metag: perf: use hard_processor_id() to get thread
metag: perf: fix frequency sampling (dynamic period)
metag: perf: add missing prev_count updates
metag: perf: fixes for interrupting perf counters
metag: perf: fix wrap handling in delta calculation
metag: perf: fix core internal / perf channel mux
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Link: http://lkml.kernel.org/r/20130321215234.606480852@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|