summaryrefslogtreecommitdiffstats
path: root/arch/arm64/configs
AgeCommit message (Collapse)Author
2016-05-25Merge git://www.linux-watchdog.org/linux-watchdogLinus Torvalds
Pull watchdog updates from Wim Van Sebroeck: - add support for Fintek F81865 Super-IO chip - add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based SoCs from Renesas - octeon: Handle the FROZEN hot plug notifier actions - f71808e_wdt fixes and cleanups - some small improvements in code and documentation * git://www.linux-watchdog.org/linux-watchdog: MAINTAINERS: Add file patterns for watchdog device tree bindings Documentation: Add ebc-c384_wdt watchdog-parameters.txt entry watchdog: shwdt: Use setup_timer() watchdog: cpwd: Use setup_timer() arm64: defconfig: enable Renesas Watchdog Timer watchdog: renesas-wdt: add driver watchdog: remove error message when unable to allocate watchdog device watchdog: f71808e_wdt: Fix WDTMOUT_STS register read watchdog: f71808e_wdt: Fix typo watchdog: f71808e_wdt: Add F81865 support watchdog: sp5100_tco: properly check for new register layouts watchdog: core: Fix circular locking dependency watchdog: core: fix trivial typo in a comment watchdog: hpwdt: Adjust documentation to match latest kernel module parameters. watchdog: imx2_wdt: add external reset support via dt prop watchdog: octeon: Handle the FROZEN hot plug notifier actions. watchdog: qcom: Report reboot reason
2016-05-18Merge tag 'armsoc-defconfig' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Arnd Bergmann: "As usual, a bunch of commits, mostly adding drivers and other options to defconfigs. We are adding three new defconfig files for the newly added 32-bit machines (aspeed and mps2), the rest is mainly housekeeping. The changes outside of arch/arm/config/ are for a Kconfig symbol that got renamed" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (63 commits) ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME ARM: u8500_defconfig: update sensor config ARM: u8500_defconfig: remove staging from defconfig ARM: multi_v7_defconfig: Remove unused Kconfig option MACH_UX500_DT ARM: at91/defconfig: sama5: add CONFIG_FHANDLE arm/configs: Add Aspeed defconfig arm/configs/multi_v5: Add Aspeed ast2400 ARM: at91: sama5: Update defconfig ARM: imx_v6_v7_defconfig: add CONFIG_MICREL_PHY ARM: imx_v6_v7_defconfig: add CONFIG_I2C_GPIO ARM: multi_v7: Enable Tegra XUSB controller in defconfig ARM: tegra: Enable XUSB controller in defconfig ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules ARM: multi_v7_defconfig: add the Atmel sama5d2-compatible ADC driver ARM: multi_v7_defconfig: add the Atmel Audio microphone interface PDMIC ARM: multi_v7_defconfig: add Atmel ISI (Image Sensor Interface) driver ARM: multi_v7_defconfig: add Atmel watchdog timers ARM: multi_v7_defconfig: add HLCDC drivers as modules ARM: at91/defconfig: add PDMIC driver to sama5_defconfig ARM: at91/defconfig: add HLCDC driver to sama5_defconfig ...
2016-05-18Merge tag 'armsoc-arm64' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC 64-bit changes from Arnd Bergmann: "One new platform gets added this time: The Cortex-A53 based LG Electronics LG1K platform used in digital TVs. The other changes are mostly smaller updates to the defconfig files, to enable additional platform specific drivers, as they get merged through the subsystem trees" * tag 'armsoc-arm64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: configs: add options useful for Armada 7K/8K support arm64: defconfig: Add Juno SATA controller arm64: defconfig: enable freescale/nxp config options arm64: defconfig: enable 48-bit virtual addresses arm64: defconfig: cleanup the defconfig MAINTAINERS: update entry for Marvell ARM platform maintainers arm64: marvell: enable AP806 and CP110 syscon driver arm64: Kconfig: select sp804 timer for ARCH_HISI arm64: defconfig: enable configs for WLAN and TI WL1835 as modules arm64: defconfig: enable several common USB network adapters arm64: defconfig: add CONFIG_SPI_SPIDEV as module arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey arm64: defconfig: Add Renesas R-Car USB 3.0 driver support MAINTAINERS: add Chanho Min as ARM/LG1K maintainer arm64: defconfig: enable ARCH_LG1K arm64: add Kconfig entry for LG1K SoC family arm64: defconfig: Enable PL330 DMA controller arm64: defconfig: enable basic boot for Amlogic meson
2016-05-14arm64: defconfig: enable Renesas Watchdog TimerWolfram Sang
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2016-05-10Merge tag 'mvebu-defconfig64-4.7-1' of git://git.infradead.org/linux-mvebu ↵Arnd Bergmann
into next/arm64 Merge "mvebu defconfig for arm64 for 4.7" from Gregory CLEMENT: - update arm64 defconfig with options useful for Armada 7K/8K support * tag 'mvebu-defconfig64-4.7-1' of git://git.infradead.org/linux-mvebu: arm64: configs: add options useful for Armada 7K/8K support
2016-05-10arm64: configs: add options useful for Armada 7K/8K supportThomas Petazzoni
This commit updates the ARM64 defconfig to include additional options useful to support the Armada 7K/8K platforms: - the SPI controller driver, spi-orion - the support for SPI flashes Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
2016-05-10arm64: defconfig: Add Juno SATA controllerAndre Przywara
The ARM Juno (r1 and r2) boards feature a SATA controller soldered on the board and connected to the PCI bus. Add the respective driver to defconfig to get hard disks supported out of the box on the Junos. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-05-10Merge tag 'imx-defconfig64-4.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/arm64 Merge "The arm64 defconfig update for Freescale/NXP support" from Shawn Guo: - Clean up defconfig with savedefconfig - Enable 48-bit virtual address support - Enable driver support for various Freescale/NXP devices * tag 'imx-defconfig64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: defconfig: enable freescale/nxp config options arm64: defconfig: enable 48-bit virtual addresses arm64: defconfig: cleanup the defconfig
2016-04-28Merge tag 'renesas-arm64-defconfig-for-v4.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64 Merge "Renesas ARM64 Based SoC Defconfig Updates for v4.7" from Simon Horman: * Add Renesas R-Car USB 3.0 driver support * tag 'renesas-arm64-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: Add Renesas R-Car USB 3.0 driver support
2016-04-27arm64: defconfig: enable freescale/nxp config optionsStuart Yoder
enable standard drivers for the NXP/Freescale ls2080a and ls1043a SoCs: -system clock driver -sata (AHCI) -sd/mmc (ESDHC) -i2c support and i2c mux -i2c rtc clock -i2c sensors (as modules) Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-27arm64: defconfig: enable 48-bit virtual addressesStuart Yoder
Some armv8 SoCs (e.g. ls2080a) have physical memory maps with discontiguous DDR regions that require 48-bit VA to have the linear map cover the entire range of DDR. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-27arm64: defconfig: cleanup the defconfigStuart Yoder
When doing: make defconfig make savedefconfig ...without making any changes, the newly saved defconfig does not match arch/arm64/configs/defconfig, and the diff looks like: $ diff defconfig arch/arm64/configs/defconfig 3a4 > CONFIG_FHANDLE=y Clean that up by committing the output of savedefconfig. Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2016-04-26arm64: defconfig: Enable ACPIMark Brown
Enable ACPI by default to support testing of ACPI only systems and ensure that defconfig will boot on anything, for arm64 this is not done in Kconfig since a very large proportion of arm64 systems have no ACPI at all. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Roy Franz <roy.franz@hpe.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-26Merge tag 'renesas-pci-defconfig-for-v4.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig Merge "Renesas ARM Based SoC Pci Defconfig Updates for v4.7" from Simon Horman: * Remove Gen2 designation from Kconfig for R-Car PCIE driver * tag 'renesas-pci-defconfig-for-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: PCI: rcar-pcie: Remove Gen2 designation from Kconfig
2016-04-26Merge tag 'hi6220-config-for-4.7v3' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into next/arm64 Merge "ARM64: Hi6220: configure updates for 4.7 based on rc3" from Wei Xu: - Enable Hi655x PMIC and regulator - Enable SPI_SPIDEV as module - Enable several common USB-Ethernet dongles - Enable configs for WLAN and TI WL1835 as modules - Enable ARM SP804 for ARCH_HISI * tag 'hi6220-config-for-4.7v3' of git://github.com/hisilicon/linux-hisi: arm64: Kconfig: select sp804 timer for ARCH_HISI arm64: defconfig: enable configs for WLAN and TI WL1835 as modules arm64: defconfig: enable several common USB network adapters arm64: defconfig: add CONFIG_SPI_SPIDEV as module arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKey
2016-04-26arm64: defconfig: enable configs for WLAN and TI WL1835 as modulesGuodong Xu
This patch enables TI WL1835 and builds as module. It also enables CFG80211, MAC80211, RFKILL and several CRYPTOs which are required by WLAN. 96boards HiKey uses TI WLAN/BT combo module WL1835MOD. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-26arm64: defconfig: enable several common USB network adaptersAkira Tsukamoto
The arm64 system is likely to be used as a host computer instead of embedded devices and adding USB-Ethernet dongles to make it behave as host PC is mandatory. Changelog: v2: Changed drivers to be as modules instead of built-in. Signed-off-by: Akira Tsukamoto <akira.tsukamoto@linaro.org> Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-26arm64: defconfig: add CONFIG_SPI_SPIDEV as moduleGuodong Xu
add CONFIG_SPI_SPIDEV as module, for arm64. Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-26arm64: defconfig: Enable the PMIC and regulator for Hi6220 and 96boards HiKeyGuodong Xu
This patch enables a number of devices currently supported by the Hi6220 and 96boards HiKey. These include a) Hi655x PMIC and regulator b) Hi6220 I2C, USB, MMC, mailbox, and reset c) CONFIG_PINCTRL_SINGLE, and CONFIG_LEDS_GPIO Since b) and c) are already in the 4.6-rc3, so kept a) only in this patch and updated subject as well. v2: - rebase to next-20160310, CONFIG_MMC_BLOCK_MINORS=16 is already in. - set CONFIG_I2C_DESIGNWARE_PLATFORM to be build as module Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-04-25Merge tag 'samsung-defconfig64-4.7' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64 Merge "Defconfig ARM64 changes for Exynos based boards for v4.7" from Krzysztof Kozlowski: 1. Enable the PL330 DMA driver. * tag 'samsung-defconfig64-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: defconfig: Enable PL330 DMA controller
2016-04-22arm64: defconfig: Add Renesas R-Car USB 3.0 driver supportYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-04-22PCI: rcar-pcie: Remove Gen2 designation from KconfigSimon Horman
It appears that Gen2 is a misnomer for the R-Car PCIE driver which also supports Gen 1 and Gen 3 SoCs. Accordingly, drop Gen 2 from the help text and Kconfig symbol. Also, re-arange the Kconfig symbol name to use PCIE as the prefix. This appears to be in keeping with other PCIE Kconfig symbols. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-04-13arm64: defconfig: enable ARCH_LG1KChanho Min
Enable building LG1K support in the defconfig. Signed-off-by: Chanho Min <chanho.min@lge.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-13Merge tag 'gxbb-arm64' of https://github.com/carlocaione/linux-meson into ↵Olof Johansson
next/arm64 Update defconfig to have basic boot for the Amlogic meson boards. * tag 'gxbb-arm64' of https://github.com/carlocaione/linux-meson: arm64: defconfig: enable basic boot for Amlogic meson Signed-off-by: Olof Johansson <olof@lixom.net>
2016-04-13arm64: defconfig: Enable PL330 DMA controllerAlim Akhtar
This patch enables PL330 DMA controller found on exynos7 SoCs. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-30arm64: defconfig: enable basic boot for Amlogic mesonKevin Hilman
Enables basic arch and serial console support for Amlogic meson family SoCs. Tested with Amlogic P200 and Hardkernel ODROID-C2 boards. Signed-off-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2016-03-29arm64: defconfig: updates for 4.6Will Deacon
A few defconfig updates got dropped on the floor during the merge window, so I've rounded up the remainder here: * Fix duplicate definition of MMC_BLOCK_MINORS and bump to 32 for msm8916 * CPUFreq support for the Juno platform, using the MHU/SCPI interface * Removal of the default command line, which assumed a console called ttyAMA0 * Bits and pieces for the Hi6220 (96Boards HiKey) Signed-off-by: Will Deacon <will.deacon@arm.com>
2016-03-12Merge tag 'samsung-soc64-4.6-2' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64 Samsung Exynos ARM64 improvements for v4.6: 1. Remove separate ARCH_EXYNOS7 symbol and consolidate it into one ARCH_EXYNOS. This depends on clk tree: removal of last presence of ARCH_EXYNOS7. * tag 'samsung-soc64-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOS clk: samsung: Don't build ARMv8 clock drivers on ARMv7 clk: samsung: Enable COMPILE_TEST for Samsung clocks clk: Move vendor's Kconfig into CCF menu section clk: mediatek: Fix memory leak on clock init fail clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h clk: xgene: Remove return from void function clk: xgene: Add SoC and PMD PLL clocks with v2 hardware Documentation: Update APM X-Gene clock binding for v2 hardware clk: s2mps11: remove redundant code clk: s2mps11: remove redundant static variables declaration clk: s2mps11: allocate only one structure for clock init clk: s2mps11: merge two for loops in one clk-divider: make sure read-only dividers do not write to their register clk: tango4: rename ARCH_TANGOX to ARCH_TANGO clk: scpi: Fix checking return value of platform_device_register_simple() clk: mvebu: Mark ioremapped memory as __iomem Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-12arm64: defconfig: Increase MMC_BLOCK_MINORS to 16Georgi Djakov
Increase the block minors from the default 8 to 16. The db410c board by default has eMMC rootfs on the 10th partition. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-12arm64: defconfig: Add Qualcomm sdhci and restart functionalityGeorgi Djakov
Enable sdhci and restart functionality for devices based on msm8916 platform. Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-03-02Merge tag 'samsung-defconfig-4.6-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/arm64 Merge "ARM64 defconfig changes for Exynos based boards for v4.6" from Krzysztof Kozlowski: 1. We want thermal for Exynos7 TMU unit to monitor the temperature. 2. Enable the drivers for PMIC used on Exynos7-based Espresso board. * tag 'samsung-defconfig-4.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: defconfig: Enable Samsung MFD and related configs arm64: defconfig: Enable exynos thermal config ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol rtc: max77686: Cleanup and reduce dmesg output rtc: Remove Maxim 77802 driver rtc: max77686: Properly handle regmap_irq_get_virq() error code rtc: max77686: Fix unsupported year message rtc: max77686: Add max77802 support rtc: max77686: Add an indirection level to access RTC registers rtc: max77686: Use a driver data struct instead hard-coded values rtc: max77686: Use usleep_range() instead of msleep() rtc: max77686: Use ARRAY_SIZE() instead of current array length rtc: max77686: Fix max77686_rtc_read_alarm() return value ARM: exynos_defconfig: Enable s5p-secss driver ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-03-01arm64: defconfig: Enable Samsung MFD and related configsAlim Akhtar
Exynos7 based espresso board uses S2MPS15, a multifunction device. This patch enables S2MPS1X regulator, pmic-clk and rtc drivers utilized by the same. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-03-01Merge tag 'hip05-config-for-4.6' of git://github.com/hisilicon/linux-hisi ↵Arnd Bergmann
into next/arm64 ARM64: Hip05: configure updates for 4.6 - Enable DesignWare APB GPIO controller * tag 'hip05-config-for-4.6' of git://github.com/hisilicon/linux-hisi: arm64: defconfig: Enable DesignWare APB GPIO controller
2016-03-01Merge tag 'sunxi-config64-for-4.6' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/arm64 Merge "Allwinner configuration changes for ARM64, 4.6 edition" from Maxime Ripard: Not a lot of changes for this kernel release, just a new Kconfig option and some changes to the arm64 defconfig to add Allwinner drivers * tag 'sunxi-config64-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: arm64: add defconfig options for Allwinner SoCs arm64: Introduce Allwinner SoC config option
2016-02-29Merge tag 'renesas-arm64-defconfig-for-v4.6' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/arm64 Merge "Renesas ARM64 Based SoC Defconfig Updates for v4.6" from Simon Horman: * Enable Renesas R-Car Gen3 USB 2.0 phy driver which is used on the r8a7795/salvator-x * tag 'renesas-arm64-defconfig-for-v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver support
2016-02-26Merge tag 'arm-soc/for-4.6/defconfig-arm64' of ↵Arnd Bergmann
http://github.com/Broadcom/stblinux into next/arm64 Merge "Broadcom defconfig-arm64 changes for 4.6" from Florian Fainelli: This pull request contains ARM64 defconfig changes for Broadcom SoCs: - Jayachandran C enables the newly introduced Broadcom Vulcan SoC to the ARM64 defconfig * tag 'arm-soc/for-4.6/defconfig-arm64' of http://github.com/Broadcom/stblinux: arm64: defconfig: Add Broadcom Vulcan to defconfig
2016-02-26arm64: defconfig: enable the Alpine familyAntoine Tenart
Enable the Alpine SoC family in the arm64 defconfig. Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-02-26arm64: defconfig: Enable exynos thermal configAlim Akhtar
This patch enables Exynos thermal and related configs for the TMU found on Exynos7 SoC. This also enables thermal emulation mode to test trip points. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
2016-02-25arm64: add defconfig options for Allwinner SoCsAndre Przywara
With the Allwinner platform now supported, enable it in the defconfig and add some options to give some decent out-of-the-box experience on those SoCs. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-02-25arm64: defconfig: Enable DesignWare APB GPIO controllerKefeng Wang
The Synopsys DesignWare APB GPIO controller is used by several vender's socs, like apm/marvell/altera/hisilicon, enable it by default. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
2016-02-24Merge tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson
next/arm64 mvebu arm64 for 4.6 (part 1) Non dt part of the Armada 3700 support: - Kconfig update - defconfig update - documentation update (including MAINTAINERS:) * tag 'mvebu-arm64-4.6-1' of git://git.infradead.org/linux-mvebu: arm64: defconfig: enable Armada 3700 related config Documentation: arm: update supported Marvell EBU processors MAINTAINERS: Extend dts entry for ARM64 mvebu files arm64: add mvebu architecture entry irqchip/armada-370-xp: Do not enable it by default when ARCH_MVEBU is selected ARM: mvebu: Use the ARMADA_370_XP_IRQ option irqchip/armada-370-xp: Allow allocation of multiple MSIs irqchip/armada-370-xp: Use shorter names for irq_chip irqchip/armada-370-xp: Use PCI_MSI_DOORBELL_START where appropriate irqchip/armada-370-xp: Use the generic MSI infrastructure irqchip/armada-370-xp: Add Kconfig option for the driver Signed-off-by: Olof Johansson <olof@lixom.net>
2016-02-24arm64: defconfig: Add Renesas R-Car Gen3 USB 2.0 phy driver supportYoshihiro Shimoda
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2016-02-23arm64: EXYNOS: Consolidate ARCH_EXYNOS7 symbol into ARCH_EXYNOSKrzysztof Kozlowski
The ARMv8 Exynos family SoCs in Linux kernel are currently: - Exynos5433 (controlled by ARCH_EXYNOS), - Exynos7 (controlled by ARCH_EXYNOS7). It duplicates Kconfig symbols unnecessarily, so consolidate them into one ARCH_EXYNOS. Future SoCs could fall also under the ARCH_EXYNOS symbol. The commit should not bring any visible functional change. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Pankaj Dubey <pankaj.dubey@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Reviewed-by: Tomasz Figa <tomasz.figa@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
2016-02-20arm64: defconfig: Add Broadcom Vulcan to defconfigJayachandran C
Enable Broadcom Vulcan support in arm64 default configuration. This will build the device tree needed to boot on a Broadcom Vulcan board. Signed-off-by: Jayachandran C <jchandra@broadcom.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-02-17arm64: defconfig: enable Armada 3700 related configGregory CLEMENT
This patch enables the configuration for the Armada 3700 family and for the related driver it uses. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2016-02-08arm64: defconfig: add spmi and usb related configsSrinivas Kandagatla
This patch adds kconfigs for spmi bus support, pinctrl drivers and usb related to get USB working on Qualcomm DB410C board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-01-26arm64: defconfig: updates for 4.5Will Deacon
Based on requests, update our defconfig so that: - We don't build any modules - PL031 is enabled (RTC emulated by qemu) - Xen guest support is enabled - The Uniphier built-in I2C controller is enabled - PCI host controller drivers for the various arm64 SoCs are enabled - Device passthrough works on Seattle using SMMU and VFIO - The Hisilicon IRQ controller (mbigen) is enabled Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-12-22Merge tag 'renesas-arm64-defconfig3-for-v4.5' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/config64 Third Round of Renesas ARM64 Based SoC Defconfig Updates for v4.5 * Enable CS2000 and Renesas R-Car SATA driver * tag 'renesas-arm64-defconfig3-for-v4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: arm64: defconfig: add CS2000 support arm64: defconfig: Add Renesas R-Car SATA driver for R-Car Gen3 SoCs Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-22Merge tag 'tegra-for-4.5-defconfig' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/config64 ARM: tegra: Default configuration updates for v4.5-rc1 This set of patches enable various drivers and features required by 64-bit Tegra SoCs (Tegra132 and Tegra210). * tag 'tegra-for-4.5-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: defconfig: Enable printk timestamps arm64: defconfig: Enable squashfs support arm64: defconfig: Enable sdhci-tegra driver arm64: defconfig: Enable serial-tegra driver arm64: defconfig: Enable tegra-apbdma driver arm64: defconfig: Do not disable Tegra AHB driver arm64: defconfig: Enable Tegra210 support Signed-off-by: Olof Johansson <olof@lixom.net>
2015-12-18arm64: defconfig: add CS2000 supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-03 22:37:34 +0000