summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-shmobile
AgeCommit message (Collapse)Author
2012-02-04Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma: i.MX SDMA: Fix burstsize settings ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-only dma: sh_dma: not all SH DMAC implementations support MEMCPY at_hdmac: bugfix for enabling channel irq dmaengine: fix missing 'cnt' in ?: in dmatest
2012-02-01ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-onlyGuennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-23ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMPWill Deacon
It turns out that the logical CPU mapping is useful even when !CONFIG_SMP for manipulation of devices like interrupt and power controllers when running a UP kernel on a CPU other than 0. This can happen when kexecing a UP image from an SMP kernel. In the future, multi-cluster systems running AMP configurations will require something similar for mapping cluster IDs, so it makes sense to decouple this logic in preparation for this support. Acked-by: Yang Bai <hamo.by@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Reported-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-17Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-16Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM / Hibernate: Drop the check of swap space size for compressed image PM / shmobile: fix A3SP suspend method PM / Domains: Skip governor functions for CONFIG_PM_RUNTIME unset PM / Domains: Fix build for CONFIG_PM_SLEEP unset PM: Make sysrq-o be available for CONFIG_PM unset
2012-01-14Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6Linus Torvalds
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (175 commits) module_param: make bool parameters really bool (drivers/video/i810) Revert "atmel_lcdfb: Adjust HFP calculation so it matches the manual." OMAPDSS: HDMI: Disable DDC internal pull up OMAPDSS: HDMI: Move duplicate code from boardfile OMAPDSS: add OrtusTech COM43H4M10XTC display support OMAP: DSS2: Support for UMSH-8173MD TFT panel ASoC: OMAP: HDMI: Move HDMI codec trigger function to generic HDMI driver OMAPDSS: HDMI: Create function to enable HDMI audio ASoC: OMAP: HDMI: Correct signature of ASoC functions ASoC: OMAP: HDMI: Introduce driver data for audio codec grvga: fix section mismatch warnings video: s3c-fb: Don't keep device runtime active when open video: s3c-fb: Hold runtime PM references when touching registers video: s3c-fb: Take a runtime PM reference when unblanked video: s3c-fb: Disable runtime PM in error paths from probe video: s3c-fb: Use s3c_fb_enable() to enable the framebuffer video: s3c-fb: Make runtime PM functional again drivers/video: fsl-diu-fb: merge fsl_diu_alloc() into map_video_memory() drivers/video: fsl-diu-fb: add default platform ops functions drivers/video: fsl-diu-fb: remove broken reference count enabling the display ...
2012-01-14PM / shmobile: fix A3SP suspend methodGuennadi Liakhovetski
Fix the reverted condition in sh7372_a3sp_suspend(). Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2012-01-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (526 commits) ASoC: twl6040 - Add method to query optimum PDM_DL1 gain ALSA: hda - Fix the lost power-setup of seconary pins after PM resume ALSA: usb-audio: add Yamaha MOX6/MOX8 support ALSA: virtuoso: add S/PDIF input support for all Xonars ALSA: ice1724 - Support for ooAoo SQ210a ALSA: ice1724 - Allow card info based on model only ALSA: ice1724 - Create capture pcm only for ADC-enabled configurations ALSA: hdspm - Provide unique driver id based on card serial ASoC: Dynamically allocate the rtd device for a non-empty release() ASoC: Fix recursive dependency due to select ATMEL_SSC in SND_ATMEL_SOC_SSC ALSA: hda - Fix the detection of "Loopback Mixing" control for VIA codecs ALSA: hda - Return the error from get_wcaps_type() for invalid NIDs ALSA: hda - Use auto-parser for HP laptops with cx20459 codec ALSA: asihpi - Fix potential Oops in snd_asihpi_cmode_info() ALSA: hdsp - Fix potential Oops in snd_hdsp_info_pref_sync_ref() ALSA: hda/cirrus - support for iMac12,2 model ASoC: cx20442: add bias control over a platform provided regulator ALSA: usb-audio - Avoid flood of frame-active debug messages ALSA: snd-usb-us122l: Delete calls to preempt_disable mfd: Put WM8994 into cache only mode when suspending ... Fix up trivial conflicts in: - arch/arm/mach-s3c64xx/mach-crag6410.c: renamed speyside_wm8962 to tobermory, added littlemill right next to it - drivers/base/regmap/{regcache.c,regmap.c}: duplicate diff that had already come in with other changes in the regmap tree
2012-01-12Merge branch 'rmobile/smp' into rmobile-latestPaul Mundt
2012-01-12arm: mach-shmobile: add a resource name for shdmaShimoda, Yoshihiro
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-12ARM: mach-shmobile: r8a7779 SMP support V3Magnus Damm
This patch contains r8a7779 SMP support V3 - now including CPU hotplug offine and online support. The r8a7779 power domain code is tied together with SMP glue code which allows us to control the power domains via CPU hotplug. At this point the kernel boots with the 4 Cortex-A9 cores in SMP mode and all CPU cores except CPU0 can be hotplugged. The code in platsmp.c is quite far from pretty, but it is kept like that intentionally to avoid creating layers of code that will go away in the near future anyway. The code needs to be updated when some per-SoC handling code will be added to the ARM architecture, see the following patch for more information: "[RFC PATCH 0/3] Per SoC descriptor" Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-10Merge branches 'rmobile/kota2' and 'rmobile/marzen' into rmobile-latestPaul Mundt
Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/Makefile Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-10ARM: mach-shmobile: r8a7779 power domain support V2Magnus Damm
Add power domain control support for the r8a7779 SoC V2. This adds support for 4 power domains for I/O Devices together with code that can be used for CPU cores as well. The only out of the ordinary experience is the need for ioremap() of SYSC registers. Because of that we need to execute some init function before setting up the domains. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-10Merge branch 'rmobile/bonito' into rmobile-latestPaul Mundt
2012-01-10ARM: mach-shmobile: Fix up marzen build for recent GIC changes.Paul Mundt
Convert to the generic gic_handle_irq() now that the shmobile version is gone. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-10ARM: mach-shmobile: r8a7779 PFC function supportMagnus Damm
Add r8a7779 PFC function support using the shared PFC code. Depends on variable bitfield config register patches. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-10Merge branch 'rmobile/core' into rmobile/marzenPaul Mundt
2012-01-09ARM: mach-shmobile: Flush caches in platform_cpu_die()Magnus Damm
Add cache flushing code to the SH-Mobile specific CPU hotplug implementation. While at it, add a cpu mask to make sure the cache flushing code is finished in platform_cpu_die() before letting the SoC-specific code in shmobile_platform_cpu_kill() proceed with turning off power. Without this code CPU hotplug offline fails when cache is enabled on Cortex-A9 based SoCs. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: Allow SoC specific CPU kill codeMagnus Damm
Add the function shmobile_platform_kill_cpu() to allow SoC specific code to tie in their CPU shutdown code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: Fix headsmp.S code to use CPUINITMagnus Damm
Convert the low level SMP assembly code for SH-Mobile ARM from using the INIT to the CPUINIT section. This unbreaks onlining of CPUs using the CPU hotplug interface: echo 1 > /sys/devices/system/cpu/cpu1/online Without this fix the reset vector code used by CPU hotplug will be freed as init section data and CPU cores cannot be brought online. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: clock-r8a7779: clkz/clkzs supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: clock-r8a7779: add DIV4 clock supportKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: Marzen LAN89218 supportMagnus Damm
Add LAN89218 support to the r8a7779 Marzen board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: Marzen SCIF2/SCIF4 supportMagnus Damm
Add SCIF2 and SCIF4 pin configuration code to the r8a7779 Marzen board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: r8a7779 PFC GPIO-only support V2Magnus Damm
Add GPIO-only r8a7779 PFC support V2. Only regular GPIOs are supported at this time. GPIO_FN are not supported because they require variable bit width support in be the shared pfc code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09ARM: mach-shmobile: r8a7779 and Marzen base support V2Magnus Damm
Initial support for the r8a7779 SoC and the Marzen board (V2). Only SCIF ports and the TMU are supported at this point. To keep things simple only entity-mapped virt-to-phys mappings are supported. This forces drivers and other SoC glue code to make use of ioremap(). We cannot support early serial console due to virtual address space collisions with the ARM kernel. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09Merge branches 'common/pfc' and 'common/clkfwk' into rmobile/marzenPaul Mundt
Conflicts: arch/arm/mach-shmobile/clock-sh73a0.c Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-09Merge branch 'master' of ↵Paul Mundt
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into rmobile-latest Conflicts: arch/arm/mach-shmobile/Makefile Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-06ARM: mach-shmobile: specify CHCLR registers on SH7372Guennadi Liakhovetski
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-05Merge branch 'devel-stable' into for-linusRussell King
Conflicts: arch/arm/kernel/setup.c arch/arm/mach-shmobile/board-kota2.c
2012-01-05Merge branches 'fixes' and 'misc' into for-linusRussell King
2012-01-04Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2012-01-02ARM: mach-shmobile: use standard 2MiB coherent DMA memory sizeMagnus Damm
The 158MiB memory area was used to support HD resolution multimedia workloads using the same legacy memory allocating solution as on SH. There are no in-tree kernel dependencies on the 158MiB setting, and future development should reserve and allocate memory using some other method like for instance CMA. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Nicolas Pitre <nico@linaro.org>
2011-12-25Merge branch 'pm-domains' into pm-for-linusRafael J. Wysocki
* pm-domains: PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor PM / Domains: Provide an always on power domain governor PM / Domains: Fix default system suspend/resume operations PM / Domains: Make it possible to assign names to generic PM domains PM / Domains: fix compilation failure for CONFIG_PM_GENERIC_DOMAINS unset PM / Domains: Automatically update overoptimistic latency information PM / Domains: Add default power off governor function (v4) PM / Domains: Add device stop governor function (v4) PM / Domains: Rework system suspend callback routines (v2) PM / Domains: Introduce "save/restore state" device callbacks PM / Domains: Make it possible to use per-device domain callbacks
2011-12-25PM / shmobile: Allow the A4R domain to be turned off at run timeRafael J. Wysocki
After adding PM QoS constraints for the I2C controller in the A4R domain, that domain can be allowed to be turned off and on by runtime PM, so remove the "always on" governor from it. However, the A4R domain has to be "on" when suspend_device_irqs() and resume_device_irqs() are executed during system suspend and resume, respectively, so that those functions don't crash while accessing the INTCS. For this reason, add a PM notifier to the SH7372 PM code and make it restore power to A4R before system suspend and remove power from all unused PM domains after system resume. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-12-25PM / shmobile: Remove the stay_on flag from SH7372's PM domainsRafael J. Wysocki
SH7372 uses two independent mechanisms for ensuring that power domains will never be turned off: the stay_on flag and the "always on" domain governor. Moreover, the "always on" governor is only taken into accout by runtime PM code paths, while the stay_on flag affects all attempts to turn the given domain off. Thus setting the stay_on flag causes the "always on" governor to be unnecessary, which is quite confusing. However, the stay_on flag is currently only set for two domains: A3SP and A4S. Moreover, it only is set for the A3SP domain if console_suspend_enabled is set, so stay_on won't be necessary for that domain any more if console_suspend_enabled is checked directly in its .suspend() routine. [This requires domain .suspend() to return a result, but that is a minor modification.] Analogously, stay_on won't be necessary for the A4S domain if it's .suspend() routine always returns an error code. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-12-25PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resumeRafael J. Wysocki
Since the SH7372's INTCS in included into syscore suspend/resume, which causes the chip to be accessed when PM domains have been turned off during system suspend, the A4R domain containing the INTCS has to stay on during system sleep, which is suboptimal from the power consumption point of view. For this reason, add a new INTC flag, skip_syscore_suspend, to mark the INTCS for intc_suspend() and intc_resume(), so that they don't touch it. This allows the A4R domain to be turned off during system suspend and the INTCS state is resrored during system resume by the A4R's "power on" code. Suggested-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-12-25PM / shmobile: Add support for the sh7372 A4S power domain / sleep modeMagnus Damm
The sh7372 contains a power domain named A4S which in turn contains power domains for both I/O Devices and CPU cores. At this point only System wide Suspend-to-RAM is supported, but the the hardware can also support CPUIdle. With more efforts in the future CPUIdle can work with bot A4S and A3SM. Tested on the sh7372 Mackerel board. [rjw: Rebased on top of the current linux-pm tree.] Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-23ARM: 7244/1: mach-shmobile: Use CONFIG_ARCH_NR_GPIOPeter De Schrijver (NVIDIA)
Add default value for CONFIG_ARCH_NR_GPIO to Kconfig and remove the definition in gpio.h. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-20Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh: ARM: mach-shmobile: SH73A0 external Ethernet fix ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 TPU LED platform data ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix ARM: mach-shmobile: Kota2 PINT fix
2011-12-19fbdev: sh_mobile_lcdc: Support FOURCC-based format APILaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-12-17Merge commit 'v3.2-rc6' into fbdev-nextFlorian Tobias Schandinat
2011-12-13Merge branch 'mfd/wm8994' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/misc into for-3.3
2011-12-09PM / shmobile: Use common always on power domain governorMark Brown
Saves a tiny amount of code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-12-06PM / Domains: Make it possible to assign names to generic PM domainsRafael J. Wysocki
Add a name member pointer to struct generic_pm_domain and use it in diagnostic messages regarding the domain power-off and power-on latencies. Update the ARM shmobile SH7372 code to assign names to the PM domains used by it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>
2011-12-06sh: clkfwk: clock-sh73a0: all div6_clks use SH_CLK_DIV6_EXT()Kuninori Morimoto
Current div6 clocks can specify their current parent clocks from its register value if it is registered by sh_clk_div6_reparent_register(). This patch modifies all div6 clocks into SH_CLK_DIV6_EXT(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-12-05Merge branch 'vmalloc' of git://git.linaro.org/people/nico/linux into ↵Russell King
devel-stable
2011-12-05Merge branch 'for-rmk' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into devel-stable Conflicts: arch/arm/common/gic.c arch/arm/plat-omap/include/plat/common.h
2011-12-01PM / Domains: Add device stop governor function (v4)Rafael J. Wysocki
Add a function deciding whether or not devices should be stopped in pm_genpd_runtime_suspend() depending on their PM QoS constraints and stop/start timing values. Make it possible to add information used by this function to device objects. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Magnus Damm <damm@opensource.se>