summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-omap2/common-board-devices.h
AgeCommit message (Collapse)Author
2012-10-15ARM: OMAP2+: nand: unify init functionsAfzal Mohammed
Helper function for updating nand platform data has been added the capability to take timing structure arguement. Usage of omap_nand_flash_init() has been replaced by modifed one, omap_nand_flash_init was doing things similar to board_nand_init except that NAND CS# were being acquired based on bootloader setting. As CS# is hardwired for a given board, acquiring gpmc CS# has been removed, and updated with the value on board. NAND CS# used in beagle board & omap3evm was found to be CS0. Thomas Weber <thomas.weber.linux@googlemail.com> reported that value of devkit8000 to be CS0. Overo board was found to be using CS0 based on u-boot, while google grep says omap3touchbook too has CS0. Signed-off-by: Afzal Mohammed <afzal@ti.com> Reviewed-by: Jon Hunter <jon-hunter@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
2012-08-06Revert "ARM: OMAP3530evm: set pendown_state and debounce time for ads7846"Igor Grinberg
1) The above commit introduced a common ->get_pendown_state() function into the generic code, but that function was board-specific for the OMAP3EVM and thus broke most other boards using this code. 2) The above commit was mis-merged introducing another bug which prevents the ads7846 driver probe function to succeed. The omap_ads7846_init() function frees the pendown GPIO in case there is no ->get_pendown_state() function set by the caller (board specific code), so it can be requested later by the ads7846 driver. The above commit add a common ->get_pendown_state() function without removing the gpio_free() call and thus once the ads7846 driver tries to use the pendown GPIO, it crashes as the pendown GPIO has not been requested. 3) The above commit introduces NO new functionality as get_pendown_state() function is already implemented in a suitable way by the ads7846 driver and the debounce time handling has already been fixed by commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code). This reverts commit 16aced80f6739beb2a6ff7b6f96c83ba80d331e8. Conflicts: arch/arm/mach-omap2/common-board-devices.c Solved by taking the working version prior to the above commit. Cc: Zumeng Chen <zumeng.chen@windriver.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Reviewed-by: Kevin Hilman <khilman@ti.com> Tested-by: Kevin Hilman <khilman@ti.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-07-06ARM: OMAP3530evm: set pendown_state and debounce time for ads7846Zumeng Chen
Currently most ads7846 config definitions for OMAP3 series boards have been moved to common-board-devices.c, and it is transparent for init. And it's no very proper to do gpio_request based on get_pendown_state since omap_ads7846_init knows everything about ads7846_config. So it's more fit to request gpio according to the right gpio_pendown and set debounce time conditionally. If we don't set proper debouce time, there are flooded interrupt counters of ads7846 responding to one time touch on screen, then the driver couldn't work very well. This patch has been validated on 3530evm. Signed-off-by: Zumeng Chen <zumeng.chen@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-07-04OMAP: New twl-common for common TWL configurationPeter Ujfalusi
Introduce a new file, which will be used to configure common pmic (TWL) devices, regulators, and TWL audio. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2011-06-01arm: omap2plus: move NAND_BLOCK_SIZE out of boardsIgor Grinberg
Several boards defining mtd partitions also defined NAND_BLOCK_SIZE as SZ_128K. Move the define to common-board-devices.h This removes multiple defines of NAND_BLOCK_SIZE. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03omap: move detection of NAND CS to common-board-devicesMike Rapoport
and reduce amount of copy/paste Signed-off-by: Mike Rapoport <mike@compulab.co.il> CC: Oleg Drokin <green@linuxhacker.ru> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03omap: use common initialization for PMIC i2c busMike Rapoport
Introduce omap_pmic_init that registers i2c bus and PMIC device on that bus and add omap2/3/4 wrappers for common cases. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-05-03omap: consolidate touch screen initialization among different boardsMike Rapoport
Add common-board-devices.c that will contain the code for peripheral devices initializatoin shared between multiple boards. Start small with touchscreen initialization. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Tony Lindgren <tony@atomide.com>