Age | Commit message (Collapse) | Author |
|
This patch adds a binding that describes the HDMI controller for
rk3066.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190330095639.14626-5-jbx6244@gmail.com
|
|
We want new stuff documented in more verbose form, this table is
deprecated. "content type" is already documented properly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: 50525c332b55 ("drm: content-type property for HDMI connector")
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190326090555.5969-1-daniel.vetter@ffwll.ch
|
|
When the DRM driver for the meson platform was created, the bindings
required that the DMC register region was provided.
Through those DMC registers, the display driver could configure an IP
called "canvas", a video lookup table used by the display IP.
It was later discovered that "canvas" is actually an IP shared by other
components than display: video decoder, 2D engine.. and that it wasn't
possible to keep the canvas code in DRM.
Over the past few months, incremental efforts have been deployed to
create a standalone meson-canvas driver [1], and the DRM driver was
patched to optionally use it if present [2].
This is the final step of those efforts where we simply remove any
control over DMC that the meson DRM driver has.
Please note that this breaks compatibility with older DTs that only
provide the DMC register range but not the amlogic,canvas node.
[1] https://patchwork.kernel.org/cover/10573771/
[2] https://patchwork.freedesktop.org/series/52076/
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190311105144.7276-2-mjourdan@baylibre.com
|
|
This adds a library for shmem backed GEM objects.
v8:
- export drm_gem_shmem_create_with_handle
- call mapping_set_gfp_mask to set default zone to GFP_HIGHUSER
- Add helper drm_gem_shmem_get_pages_sgt()
v7:
- Use write-combine for mmap instead. This is the more common
case. (robher)
v6:
- Fix uninitialized variable issue in an error path (anholt).
- Add a drm_gem_shmem_vm_open() to the fops to get proper refcounting
of the pages (anholt).
v5:
- Drop drm_gem_shmem_prime_mmap() (Daniel Vetter)
- drm_gem_shmem_mmap(): Subtract drm_vma_node_start() to get the real
vma->vm_pgoff
- drm_gem_shmem_fault(): Use vmf->pgoff now that vma->vm_pgoff is correct
v4:
- Drop cache modes (Thomas Hellstrom)
- Add a GEM attached vtable
v3:
- Grammar (Sam Ravnborg)
- s/drm_gem_shmem_put_pages_unlocked/drm_gem_shmem_put_pages_locked/
(Sam Ravnborg)
- Add debug output in error path (Sam Ravnborg)
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190313004344.24169-1-robh@kernel.org
|
|
No compatible string for it yet, just the version-dependent changes.
They've now tied the hub and the core interrupt lines into a single
interrupt line coming out of the block. It also turns out I made a
mistake in modeling the V3D v3.3 and v4.1 bridge as a part of V3D
itself -- the bridge is going away in favor of an external reset
controller in a larger HW module.
v2: Use consistent checks for whether we're on 4.2, and fix a leak in
an error path.
v3: Use more general means of determining if the current 4.2 changes
are in place, as apparently other platforms may switch back (noted
by Dave). Update the binding doc.
v4: Improve error handling for IRQ init.
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190308174336.7866-2-eric@anholt.net
Reviewed-by: Dave Emett <david.emett@broadcom.com>
|
|
Picking up v5.0 + missed misc-fixes from last release
Signed-off-by: Sean Paul <seanpaul@chromium.org>
|
|
No more users left so it can go alongside its helpers.
Update the tinydrm docs description and remove todo entry.
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-7-noralf@tronnes.org
|
|
This adds a resource managed (devres) version of drm_dev_init().
v2: Remove devm_drm_dev_register() since we can't touch hw in devm
release functions and drivers want to disable hw on driver module
unload (Daniel Vetter, Greg KH)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190225144232.20761-3-noralf@tronnes.org
|
|
There is a really hairy resolution involving amdgpu fixes, that I'd rather confirm here.
Also some misc fixes are landed by me, but the pr has them as well.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The Ronbo RB070D30 panel is a 1024x600 MIPI-DSI panel.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c05b961302ec4a2af32ea6c215ec0749b1a9cff7.1550650810.git-series.maxime.ripard@bootlin.com
|
|
Ronbo Electronics manufactures display panels.
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Konstantin Sudakov <k.sudakov@integrasources.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a7ab8bd59ad673f88e2c39cf6cb21bd959cf4db4.1550650810.git-series.maxime.ripard@bootlin.com
|
|
Pull networking fixes from David Miller:
"Hopefully the last pull request for this release. Fingers crossed:
1) Only refcount ESP stats on full sockets, from Martin Willi.
2) Missing barriers in AF_UNIX, from Al Viro.
3) RCU protection fixes in ipv6 route code, from Paolo Abeni.
4) Avoid false positives in untrusted GSO validation, from Willem de
Bruijn.
5) Forwarded mesh packets in mac80211 need more tailroom allocated,
from Felix Fietkau.
6) Use operstate consistently for linkup in team driver, from George
Wilkie.
7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF
and PF code paths.
8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni.
9) nfp eBPF code gen fixes from Jiong Wang.
10) bnxt_en firmware timeout fix from Michael Chan.
11) Use after free in udp/udpv6 error handlers, from Paolo Abeni.
12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
net: phy: realtek: Dummy IRQ calls for RTL8366RB
tcp: repaired skbs must init their tso_segs
net/x25: fix a race in x25_bind()
net: dsa: Remove documentation for port_fdb_prepare
Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"
selftests: fib_tests: sleep after changing carrier. again.
net: set static variable an initial value in atl2_probe()
net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G
bpf, doc: add bpf list as secondary entry to maintainers file
udp: fix possible user after free in error handler
udpv6: fix possible user after free in error handler
fou6: fix proto error handler argument type
udpv6: add the required annotation to mib type
mdio_bus: Fix use-after-free on device_register fails
net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255
bnxt_en: Wait longer for the firmware message response to complete.
bnxt_en: Fix typo in firmware message timeout logic.
nfp: bpf: fix ALU32 high bits clearance bug
nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K
Documentation: networking: switchdev: Update port parent ID section
...
|
|
This callback was removed some time ago, also remove the documentation.
Fixes: 1b6dd556c304 ("net: dsa: Remove prepare phase for FDB")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the section about switchdev drivers having to implement a
switchdev_port_attr_get() function to return
SWITCHDEV_ATTR_ID_PORT_PARENT_ID since that is no longer valid after
commit bccb30254a4a ("net: Get rid of
SWITCHDEV_ATTR_ID_PORT_PARENT_ID").
Fixes: bccb30254a4a ("net: Get rid of SWITCHDEV_ATTR_ID_PORT_PARENT_ID")
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull documentation fix from Jonathan Corbet:
"A single patch from Arnd bringing some top-level docs into the 5.0
era"
* tag 'docs-5.0-fix' of git://git.lwn.net/linux:
Documentation: change linux-4.x references to 5.x
|
|
On the display side, cleanups and fixes to enabled modifiers
(QCOM_COMPRESSED). And otherwise mostly misc fixes all around.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuZ5uBKpf=fHvKpTiD10nychuEY8rnE+HeRz0QMvtY5_A@mail.gmail.com
|
|
Now that component has docs it's worth spending a few words and
hyperlinks on recommended best practices in drm.
v2: Add another item that component shouldn't be preferred over
drm_bridge/panel and similar subsystems already providing specialized
support for specific components (Laurent). Also convert to bullet
list.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Russell King - ARM Linux admin <linux@armlinux.org.uk>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190212164615.13370-1-daniel.vetter@ffwll.ch
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-misc-next
typed componented support + i915/snd-hda changes
This is needed by the new MEI-HDCP support in i915, so will need to go
in through drm and drivers-misc trees at least.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
# gpg: Signature made Mon 11 Feb 2019 06:06:26 PM CET
# gpg: using RSA key 6F89C6EA32EEF18E5723E3DF4C0F727BF098AA71
# gpg: Can't check signature: No public key
From: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/CAKMK7uHU37VLbe4RBZ3GOow+=pupYAHotkVrpqJeiUcpSfjX8Q@mail.gmail.com
|
|
Backmerge drm-next to bring in -rc7
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Many users of drm_gem_object embed a struct reservation_object into
their subclassed struct, so let's add one to struct drm_gem_object.
This will allow removing the reservation object from the subclasses
and removing the ->gem_prime_res_obj callback.
With the addition, add a drm_gem_reservation_object_wait() helper
function for drivers to use in wait ioctls.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190202154158.10443-2-robh@kernel.org
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Backmerging for nouveau and imx that needed some fixes for next pulls.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
MSG_ZEROCOPY implementation for UDP was merged in v5.0,
6e360f733113 ("Merge branch 'udp-msg_zerocopy'").
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As linux-5.0.x is coming up soon, the documentation should match,
in particular the README.rst file, so change all 4.x references
accordingly. There was a mix of lowercase and uppercase X here,
which I changed to using lowercase consistently.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Pull networking fixes from David Miller:
1) Fix MAC address setting in mac80211 pmsr code, from Johannes Berg.
2) Probe SFP modules after being attached, from Russell King.
3) Byte ordering bug in SMC rx_curs_confirmed code, from Ursula Braun.
4) Revert some r8169 changes that are causing regressions, from Heiner
Kallweit.
5) Fix spurious connection timeouts in netfilter nat code, from Florian
Westphal.
6) SKB leak in tipc, from Hoang Le.
7) Short packet checkum issue in mlx4, similar to a previous mlx5
change, from Saeed Mahameed. The issue is that whilst padding bytes
are usually zero, it is not guarateed and the hardware doesn't take
the padding bytes into consideration when generating the checksum.
8) Fix various races in cls_tcindex, from Cong Wang.
9) Need to set stream ext to NULL before freeing in SCTP code, from Xin
Long.
10) Fix locking in phy_is_started, from Heiner Kallweit.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
net: ethernet: freescale: set FEC ethtool regs version
net: hns: Fix object reference leaks in hns_dsaf_roce_reset()
mm: page_alloc: fix ref bias in page_frag_alloc() for 1-byte allocs
net: phy: fix potential race in the phylib state machine
net: phy: don't use locking in phy_is_started
selftests: fix timestamping Makefile
net: dsa: bcm_sf2: potential array overflow in bcm_sf2_sw_suspend()
net: fix possible overflow in __sk_mem_raise_allocated()
dsa: mv88e6xxx: Ensure all pending interrupts are handled prior to exit
net: phy: fix interrupt handling in non-started states
sctp: set stream ext to NULL after freeing it in sctp_stream_outq_migrate
sctp: call gso_reset_checksum when computing checksum in sctp_gso_segment
net/mlx5e: XDP, fix redirect resources availability check
net/mlx5: Fix a compilation warning in events.c
net/mlx5: No command allowed when command interface is not ready
net/mlx5e: Fix NULL pointer derefernce in set channels error flow
netfilter: nft_compat: use-after-free when deleting targets
team: avoid complex list operations in team_nl_cmd_options_set()
net_sched: fix two more memory leaks in cls_tcindex
net_sched: fix a memory leak in cls_tcindex
...
|
|
Netlink has moved from bitmasks to group numbers long ago.
Signed-off-by: Jouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix a grammatical error in the dentry-state text and clarify the usage
of negative dentries.
Fixes: af0c9af1b3f66 ("fs/dcache: Track & report number of negative dentries")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
We need to backmerge drm-next to fix the komeda build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Remove KMS cleanup task from documentation solved by patchset
https://patchwork.freedesktop.org/series/54310/
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208195312.aqv7acr3hgion5yz@smtp.gmail.com
|
|
git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.1-rc1
This set of changes starts of with some refactoring of the CEC support
to make it reusable on Tegra210 and later. Following are a couple of
fixes for HDMI audio support (via HDA).
The bulk here is a set of preparatory patches working towards enabling
Tegra186 support for host1x and VIC. Additional patches will be needed
to fully enable this, but they're not quite ready yet.
To round things off, this also adds support for configuring the SOR
crossbar using device tree, and fixes a couple of job-related issues in
the host1x code.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208144721.25830-1-thierry.reding@gmail.com
|
|
Renesas display drivers changes for v5.1 (2nd part):
- R8A7744 LVDS support
- DPAD0 output support on D3/E3
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208003355.GG10386@pendragon.ideasonboard.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"Intel decided to leave the newly added Scalable Mode Feature
default-disabled for now. The patch here accomplishes that"
* tag 'iommu-fixes-v5.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Leave scalable mode default off
|
|
While typing these I think doing an s/component_master/aggregate/
would be useful:
- it's shorter :-)
- I think component/aggregate is much more meaningful naming than
component/puppetmaster or something like that. At least to my
English ear "aggregate" emphasizes much more the "assemble a pile of
things into something bigger" aspect, and there's not really much
of a control hierarchy between aggregate and constituing components.
But that's way more than a quick doc typing exercise ...
Thanks to Ram for commenting on an initial draft of these docs.
v2: Review from Rafael:
- git add Documenation/driver-api/component.rst
- lots of polish to the wording + spelling fixes.
v3: Review from Russell:
- s/framework/helper
- clarify the documentation for component_match_add functions.
v4: Remove a few superflous "This".
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: "C, Ramalingam" <ramalingam.c@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-1-daniel.vetter@ffwll.ch
|
|
Document the RZ/G1N (R8A7744) LVDS bindings.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Rob Herring <robh@kernel.org>
|
|
git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixlet from Darren Hart:
"Correct Documentation/ABI 4.21 KernelVersion to 5.0"
* tag 'platform-drivers-x86-v5.0-2' of git://git.infradead.org/linux-platform-drivers-x86:
Documentation/ABI: Correct mlxreg-io KernelVersion for 5.0
|
|
The SOR has a crossbar that can map each lane of the SOR to each of the
SOR pads. The mapping is usually the same across designs for a specific
SoC generation, but every now and then there's a design that doesn't.
Allow the crossbar configuration to be specified in device tree to make
it possible to support these designs.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
This commit documents new compatible for s5pv210 soc,
which will be also supported by this driver.
Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Compared to the RFC[1] no changes to the patch itself, but igt moved
forward a lot:
- gitlab CI builds with: reduced configs/libraries, arm cross build
and a sysroot build (should address all the build/cross platform
concerns raised in the RFC discussions).
- tests reorganized into subdirectories so that the i915-gem tests
don't clog the main/shared tests directory anymore
- quite a few more non-intel people contributing/reviewing/committing
igt tests patches.
I think this addresses all the concerns raised in the RFC discussions,
and assuming there's enough Acks and no new issues that pop up, we can
go ahead with this.
v2:
- Use "should" (in the usual RFC sense) to make it clear that in the
end this is all up to reviewer's discretion, as usual (Jani).
- Also in the title s/mandatory/strongly suggested/ (me)
- Make it clear we're not going to block features if a testcase is not
feasible, given hw and state of igt, both having some good gaps in
what can be tested (Harry, Eric, Sean, ...).
1: https://patchwork.kernel.org/patch/10648851/
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: "Wentland, Harry" <Harry.Wentland@amd.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Reviewed-by: Eric Anholt <eric@anholt.net> (v1)
Acked-by: Petri Latvala <petri.latvala@intel.com>
Acked-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Acked-by: "Wentland, Harry" <Harry.Wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Brian Starkey <brian.starkey@arm.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128172258.9585-1-daniel.vetter@ffwll.ch
|
|
Remove the list of broken tests on VKMS solved by patchset
https://patchwork.freedesktop.org/series/55994/
Signed-off-by: Shayenne Moura <shayenneluzmoura@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190206193157.3b53ipdxtcqc4hv4@smtp.gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.1:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- Split out some part of drm_crtc_helper.h into drm_probe_helper.h
- DRIVER_* flags improvements
- New tasks on the TODO-list
- Improvements to the documentation
Driver Changes:
- Continual of drmP.h removal in multiple drivers
- Removal of FBINFO_(FLAG_)DEFAULT in multiple drivers
- sun4i: Addition of the A23 support, multiple fixes for the tiled
formats
- atmel-hlcdc: Fix of clipping and rotation properties
- qxl: various BO-related improvements, prime and generic fbdev emulation
support
- dw-hdmi: Support for HDMI2.0 2160p modes and YUV420 output
- New Sitronix ST7701 panel driver
- New Kingdisplay KD097D04 panel driver
- New LeMaker BL035-RGB-002 panel driver
- New PDA 91-00156-A0 panel driver
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190201144749.t3abxvguhstu6bcl@flea
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A few updates for x86:
- Fix an unintended sign extension issue in the fault handling code
- Rename the new resource control config switch so it's less
confusing
- Avoid setting up EFI info in kexec when the EFI runtime is
disabled.
- Fix the microcode version check in the AMD microcode loader so it
only loads higher version numbers and never downgrades
- Set EFER.LME in the 32bit trampoline before returning to long mode
to handle older AMD/KVM behaviour properly.
- Add Darren and Andy as x86/platform reviewers"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Avoid confusion over the new X86_RESCTRL config
x86/kexec: Don't setup EFI info if EFI runtime is not enabled
x86/microcode/amd: Don't falsely trick the late loading mechanism
MAINTAINERS: Add Andy and Darren as arch/x86/platform/ reviewers
x86/fault: Fix sign-extend unintended sign extension
x86/boot/compressed/64: Set EFER.LME=1 in 32-bit trampoline before returning to long mode
x86/cpu: Add Atom Tremont (Jacobsville)
|
|
This is a panel handled through the generic lvds-panel binding,
so only needs its additional compatible specified.
Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181113124205.29319-1-heiko@sntech.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fix from Rob Herring:
"A single fix for building DT bindings in-tree"
* tag 'devicetree-fixes-for-5.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Fix dt_binding_check target for in tree builds
|
|
"Resource Control" is a very broad term for this CPU feature, and a term
that is also associated with containers, cgroups etc. This can easily
cause confusion.
Make the user prompt more specific. Match the config symbol name.
[ bp: In the future, the corresponding ARM arch-specific code will be
under ARM_CPU_RESCTRL and the arch-agnostic bits will be carved out
under the CPU_RESCTRL umbrella symbol. ]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Babu Moger <Babu.Moger@amd.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: linux-doc@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190130195621.GA30653@cmpxchg.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fixes from Stephen Boyd:
"Mostly driver fixes, but there's a core framework fix in here too:
- Revert the commits that introduce clk management for the SP clk on
MMP2 SoCs (used for OLPC). Turns out it wasn't a good idea and
there isn't any need to manage this clk, it just causes more
headaches.
- A performance regression that went unnoticed for many years where
we would traverse the entire clk tree looking for a clk by name
when we already have the pointer to said clk that we're looking for
- A parent linkage fix for the qcom SDM845 clk driver
- An i.MX clk driver rate miscalculation fix where order of
operations were messed up
- One error handling fix from the static checkers"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc: Use active only source for CPUSS clocks
clk: ti: Fix error handling in ti_clk_parse_divider_data()
clk: imx: Fix fractional clock set rate computation
clk: Remove global clk traversal on fetch parent index
Revert "dt-bindings: marvell,mmp2: Add clock id for the SP clock"
Revert "clk: mmp2: add SP clock"
Revert "Input: olpc_apsp - enable the SP clock"
|
|
drm-next
This pull includes the new Arm "komeda" DRM driver. It is currently hosted
in the same repo as the other "mali-dp" driver because it is the next
iteration of the IP.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131173600.GN25147@e110455-lin.cambridge.arm.com
|
|
Drivers shouldn't be using these values, add a TODO so someone removes
them.
Changes in v2:
- Add drm_display_mode.vrefresh removal (Ville)
- Add Sam's R-b and bonus points
Changes in v3:
- Add hsync removal todo item (Daniel)
- Change vrefresh wording to make removal less optional
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Bonus-points-awarded-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129192637.73296-1-sean@poorly.run
|
|
It only talks about crtc, brings up intel as an example and I think is
more misleading than useful really. Plus we have lots of discussion
about how your standard kms driver should be initialized/cleaned up,
so maybe better to document this when we have a better idea.
v2: Fix typo in commit message (Nicholas).
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-2-daniel.vetter@ffwll.ch
|
|
.. next to all the other sink helpers. The rect library is more used
for handling plane clipping, so belongs to those imo.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190130163006.28945-1-daniel.vetter@ffwll.ch
|
|
The current dentry number tracking code doesn't distinguish between
positive & negative dentries. It just reports the total number of
dentries in the LRU lists.
As excessive number of negative dentries can have an impact on system
performance, it will be wise to track the number of positive and
negative dentries separately.
This patch adds tracking for the total number of negative dentries in
the system LRU lists and reports it in the 5th field in the
/proc/sys/fs/dentry-state file. The number, however, does not include
negative dentries that are in flight but not in the LRU yet as well as
those in the shrinker lists which are on the way out anyway.
The number of positive dentries in the LRU lists can be roughly found by
subtracting the number of negative dentries from the unused count.
Matthew Wilcox had confirmed that since the introduction of the
dentry_stat structure in 2.1.60, the dummy array was there, probably for
future extension. They were not replacements of pre-existing fields.
So no sane applications that read the value of /proc/sys/fs/dentry-state
will do dummy thing if the last 2 fields of the sysctl parameter are not
zero. IOW, it will be safe to use one of the dummy array entry for
negative dentry count.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
I'm kinda fed up explaining why the have a confusing name :-)
v2: Fix typo that Eric Engestrom spotted.
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190129132153.28844-1-daniel.vetter@ffwll.ch
|