summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2014-05-21hwmon: (max1619) Drop function macrosGuenter Roeck
Function macros make the code larger and difficult ro read. Drop them and reduce code size (on x86_64) by ~1800 bytes. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (max1619) Rearrange code to avoid forward declarationsGuenter Roeck
Forward declarations are unnecessary and easy to avoid, so rearrange code and drop them. No functional change. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (max1619) Drop FSF addressGuenter Roeck
The FSF address may chance over time, so drop it. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (max1619) Fix critical alarm displayGuenter Roeck
The overtemperature status bit, which is used to display critical alarm status, matches the output of the OVERT signal 1:1. If that signal is active-low, the bit will read 1 if there is no alarm. It is therefore necessary to reverse the bit in this case. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (jc42) Add support for STTS2004 and AT30TSE004Guenter Roeck
Also fix links to datasheets for other supported sensors from ST Microelectronics, and add links to several Atmel datasheets. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (jc42) Convert function macros into functionsGuenter Roeck
Convert function macros into functions to make the code easier to read and reduce code size. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (jc42) Rearrange code to avoid forward declarationsGuenter Roeck
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Add device IDs for EMC1412, EMC1413, and EMC1414Guenter Roeck
EMC1412, EMC1413, and EMC1414 are fully compatible to EMC1402, EMC1403, and EMC1404, and even report the same chip ID. Add to device ID table to enable instantiation with correct chip names. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Add support for min_hyst attributesGuenter Roeck
The hysteresis value applies to all limits, so add support for tempX_min_hyst. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Add support for max_hyst attributesGuenter Roeck
The hysteresis value applies to all limits, so add support for tempX_max_hyst. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Relax hysteresis limit write checksGuenter Roeck
Writing the hysteresis limit returned -ERANGE if the written hysteresis was too high or too low. Relax error check and adjust the hysteresis value to its valid range. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Make all hyst attributes except for temp1_crit_hyst read-onlyGuenter Roeck
All chips in this chip series only support a single hysteresis value. Having multiple writable hysteresis attributes is therefore confusing, since a single write affects all hysteresis temperatures. Make all but one (temp1_crit_hyst) read-only. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Add support for alarm and diode fault status on EMC14x2Guenter Roeck
Alarm and fault status register on EMC1402, EMC1412, and EMC1422 is reported in a different register than with other chips. Add support for it. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Report external diode fault statusGuenter Roeck
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Convert to use regmapGuenter Roeck
Convert to regmap to be able to use its register caching mechanism. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Add driver documentationGuenter Roeck
With the driver now supporting several chip variants, it is about time to document what is supported. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: Document hwmon kernel APIGuenter Roeck
The hwmon subsystem has been around for a while. Time to document its kernel API. Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (emc1403) Add support for emc14x2Josef Gajdusek
Add support for emc1402/emc1412/emc1422 temperature monitoring chips. This line of sensors only has 2 temperature channels (internal and external) in comparison to the emc14x3 (3 channels) and emc14x4 (4 channels). Signed-off-by: Josef Gajdusek <atx@atx.name> [Guenter Roeck: ordered i2c address list, updated description/headline] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (adm1029) Update Corentin Labbe's emailLABBE Corentin
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21MAINTAINERS: Update Corentin Labbe's emailLABBE Corentin
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (iio_hwmon) Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (gpio-fan) Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (g762) Make of_device_id array constJingoo Han
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (ltc2945) Fix 1st comment lineGuenter Roeck
Somehow a couple of spaces got added to the first line. Remove them. No code change. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (vt1211) remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (s3c-hwmon) remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (pc87427) remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (max197) remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (max1111) remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm93) remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (ibmpex) remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <jdelvare@suse.de> Acked-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (f71805f) remove unnecessary OOM messagesJingoo Han
The site-specific OOM messages are unnecessary, because they duplicate the MM subsystem generic OOM message. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm92) Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck
Use devm_hwmon_device_register_with_groups API to attach attributes to hwmon device, simplify code, and reduce code size. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm92) Drop function macrosGuenter Roeck
Function macros obfuscate code and increase code size, so drop them. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm92) Drop FSF mailing addressGuenter Roeck
The FSF mailing address may change, so drop it. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm92) Drop unnecessary forward declarationGuenter Roeck
Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm75) Convert to use hwmon_device_register_with_groupsGuenter Roeck
Simplify code and attach hwmon attributes to hwmon device. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm77) Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck
Use devm_hwmon_device_register_with_groups API to attach attributes to hwmon device, simplify code, and reduce code size. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm77) Drop function macrosGuenter Roeck
Function macros make the code harder to read and increase code size, so drop them. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm77) Do not preserve hysteresis when updating critical temp limitGuenter Roeck
Updating the hysteresis value when updating the critical temperature limit was following the rule of 'least surprise'. However, it had the undesirable side effect of changing the hysteresis for all other attributes, which defeats the purpose of least surprise. In addition, it could result in invalid hysteresis values if the resulting hysteresis was too large. In such cases the resulting hysteresis ended up changed anyway, which again defeats the purpose. So drop that code and document the new behavior. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm77) Rearrange code to no longer require forward declarationsGuenter Roeck
Forward declarations are easy to avoid and unnecessary. Rearrange code to avoid it. No functional change. Acked-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm77) Drop FSF mailing addressGuenter Roeck
The FSF mailing address changes over time, so drop it. No functional change. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (tmp421) Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck
Use devm_hwmon_device_register_with_groups API to attach attributes to hwmon device, simplify code, and reduce code size. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (tmp102) Convert to use hwmon_device_register_with_groupsGuenter Roeck
Simplify code, reduce code size, and attach sysfs attributes to hwmon device. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (tmp102) Introduce dev variable in probe functionGuenter Roeck
The pointer to client->dev is used several times in the probe function. Simplify code by introducing a separate variable for it. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-21hwmon: (lm70) Convert to use devm_hwmon_device_register_with_groupsGuenter Roeck
Use devm_hwmon_device_register_with_groups API to attach attributes to hwmon device, simplify code, and reduce code size. Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2014-05-22Linux 3.15-rc6Linus Torvalds
2014-05-22Merge branch 'merge' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull two powerpc fixes from Ben Herrenschmidt: "Here are a couple of fixes for 3.15. One from Anton fixes a nasty regression I introduced when trying to fix a loss of irq_work whose consequences is that we can completely lose timer interrupts on a CPU... not pretty. The other one is a change to our PCIe reset hook to use a firmware call instead of direct config space accesses to trigger a fundamental reset on the root port. This is necessary so that the FW gets a chance to disable the link down error monitoring, which would otherwise trip and cause subsequent fatal EEH error" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: irq work racing with timer interrupt can result in timer interrupt hang powerpc/powernv: Reset root port in firmware
2014-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull two btrfs fixes from Chris Mason: "This has two fixes that we've been testing for 3.16, but since both are safe and fix real bugs, it makes sense to send for 3.15 instead" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: send, fix incorrect ref access when using extrefs Btrfs: fix EIO on reading file after ioctl clone works on it
2014-05-22Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull two ceph fixes from Sage Weil: "The first patch fixes a problem when we have a page count of 0 for sendpage which is triggered by zfs. The second fixes a bug in CRUSH that was resolved in the userland code a while back but fell through the cracks on the kernel side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: crush: decode and initialize chooseleaf_vary_r libceph: fix corruption when using page_count 0 page in rbd
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-29 11:22:12 +0000