| Age | Commit message (Collapse) | Author |
|---|
|
There is a spelling mistake in the Kconfig. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20201216120020.13149-1-colin.king@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Return -EINVAL if we can't find the correct device. Currently it
returns success.
Fixes: 13159183ec7a ("qlcnic: 83xx base driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9nHbMqEyI/xPfGd@mwanda
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
htable_bits() can call jhash_size(32) and trigger shift-out-of-bounds
UBSAN: shift-out-of-bounds in net/netfilter/ipset/ip_set_hash_gen.h:151:6
shift exponent 32 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 8498 Comm: syz-executor519
Not tainted 5.10.0-rc7-next-20201208-syzkaller #0
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:120
ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
__ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
htable_bits net/netfilter/ipset/ip_set_hash_gen.h:151 [inline]
hash_mac_create.cold+0x58/0x9b net/netfilter/ipset/ip_set_hash_gen.h:1524
ip_set_create+0x610/0x1380 net/netfilter/ipset/ip_set_core.c:1115
nfnetlink_rcv_msg+0xecc/0x1180 net/netfilter/nfnetlink.c:252
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
nfnetlink_rcv+0x1ac/0x420 net/netfilter/nfnetlink.c:600
netlink_unicast_kernel net/netlink/af_netlink.c:1304 [inline]
netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1330
netlink_sendmsg+0x907/0xe40 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:652 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:672
____sys_sendmsg+0x6e8/0x810 net/socket.c:2345
___sys_sendmsg+0xf3/0x170 net/socket.c:2399
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2432
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This patch replaces htable_bits() by simple fls(hashsize - 1) call:
it alone returns valid nbits both for round and non-round hashsizes.
It is normal to set any nbits here because it is validated inside
following htable_size() call which returns 0 for nbits>31.
Fixes: 1feab10d7e6d("netfilter: ipset: Unified hash type generation")
Reported-by: syzbot+d66bfadebca46cf61a2b@syzkaller.appspotmail.com
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
currently mtype_resize() can cause oops
t = ip_set_alloc(htable_size(htable_bits));
if (!t) {
ret = -ENOMEM;
goto out;
}
t->hregion = ip_set_alloc(ahash_sizeof_regions(htable_bits));
Increased htable_bits can force htable_size() to return 0.
In own turn ip_set_alloc(0) returns not 0 but ZERO_SIZE_PTR,
so follwoing access to t->hregion should trigger an OOPS.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This fixes the dereference to fetch the RCU pointer when holding
the appropriate xtables lock.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: cc00bcaa5899 ("netfilter: x_tables: Switch synchronization to RCU")
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Paolo Abeni says:
====================
mptcp: a bunch of assorted fixes
This series pulls a few fixes for the MPTCP datapath.
Most issues addressed here has been recently introduced
with the recent reworks, with the notable exception of
the first patch, which addresses an issue present since
the early days
====================
Link: https://lore.kernel.org/r/cover.1608114076.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When sendmsg() needs to wait for memory, the pending data
is not updated. That causes a drift in forward memory allocation,
leading to stall and/or warnings at socket close time.
This change addresses the above issue moving the pending data
counter update inside the sendmsg() main loop.
Fixes: 6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When multiple subflows are active, we can receive a
window update on subflow with no write space available.
MPTCP will try to push frames on such subflow and will
fail. Pending frames will be pushed only after receiving
a window update on a subflow with some wspace available.
Overall the above could lead to suboptimal aggregate
bandwidth usage.
Instead, we should try to push pending frames as soon as
the subflow reaches both conditions mentioned above.
We can finally enable self-tests with asymmetric links,
as the above makes them finally pass.
Fixes: 6f8a612a33e4 ("mptcp: keep track of advertised windows right edge")
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MPTCP closes the subflows while holding the msk-level lock.
While acquiring the subflow socket lock we need to use the
correct nested annotation, or we can hit a lockdep splat
at runtime.
Reported-and-tested-by: Geliang Tang <geliangtang@gmail.com>
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Currently MPTCP is not propagating the security context
from the ingress request socket to newly created msk
at clone time.
Address the issue invoking the missing security helper.
Fixes: cf7da0d66cc1 ("mptcp: Create SUBFLOW socket for incoming connections")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MLX5_GENERAL_OBJECT_TYPES types bitfield is 64-bit field.
Defining an enum for such bit fields on 32-bit platform results in below
warning.
./include/vdso/bits.h:7:26: warning: left shift count >= width of type [-Wshift-count-overflow]
^
./include/linux/mlx5/mlx5_ifc.h:10716:46: note: in expansion of macro ‘BIT’
MLX5_HCA_CAP_GENERAL_OBJECT_TYPES_SAMPLER = BIT(0x20),
^~~
Use 32-bit friendly BIT_ULL macro.
Fixes: 2a2970891647 ("net/mlx5: Add sample offload hardware bits and structures")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20201213120641.216032-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 991fcb77f490 ("drm/edid: Fix uninitialized variable in
drm_cvt_modes()") just replaced one warning with another.
The original warning about a possibly uninitialized variable was due to
the compiler not being smart enough to see that the case statement
actually enumerated all possible cases. And the initial fix was just to
add a "default" case that had a single "unreachable()", just to tell the
compiler that that situation cannot happen.
However, that doesn't actually fix the fundamental reason for the
problem: the compiler still doesn't see that the existing case
statements enumerate all possibilities, so the compiler will still
generate code to jump to that unreachable case statement. It just won't
complain about an uninitialized variable any more.
So now the compiler generates code to our inline asm marker that we told
it would not fall through, and end end result is basically random. We
have created a bridge to nowhere.
And then, depending on the random details of just exactly what the
compiler ends up doing, 'objtool' might end up complaining about the
conditional branches (for conditions that cannot happen, and that thus
will never be taken - but if the compiler was not smart enough to figure
that out, we can't expect objtool to do so) going off in the weeds.
So depending on how the compiler has laid out the result, you might see
something like this:
drivers/gpu/drm/drm_edid.o: warning: objtool: do_cvt_mode() falls through to next function drm_mode_detailed.isra.0()
and now you have a truly inscrutable warning that makes no sense at all
unless you start looking at whatever random code the compiler happened
to generate for our bare "unreachable()" statement.
IOW, don't use "unreachable()" unless you have an _active_ operation
that generates code that actually makes it obvious that something is not
reachable (ie an UD instruction or similar).
Solve the "compiler isn't smart enough" problem by just marking one of
the cases as "default", so that even when the compiler doesn't otherwise
see that we've enumerated all cases, the compiler will feel happy and
safe about there always being a valid case that initializes the 'width'
variable.
This also generates better code, since now the compiler doesn't generate
comparisons for five different possibilities (the four real ones and the
one that can't happen), but just for the three real ones and "the rest"
(which is that last one).
A smart enough compiler that sees that we cover all the cases won't care.
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
request_firmware_nowait() which schedules another work is used to load
firmware when USB is probing. If USB is unplugged before running the
firmware work, it goes disconnect ops, and then causes use-after-free.
Though we wait for completion of firmware work before freeing the hw,
firmware callback rises completion too early. So I move it to the
last step.
usb 5-1: Direct firmware load for rtlwifi/rtl8192cufw.bin failed with error -2
rtlwifi: Loading alternative firmware rtlwifi/rtl8192cufw.bin
rtlwifi: Selected firmware is not available
==================================================================
BUG: KASAN: use-after-free in rtl_fw_do_work.cold+0x68/0x6a drivers/net/wireless/realtek/rtlwifi/core.c:93
Write of size 4 at addr ffff8881454cff50 by task kworker/0:6/7379
CPU: 0 PID: 7379 Comm: kworker/0:6 Not tainted 5.10.0-rc7-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events request_firmware_work_func
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x107/0x163 lib/dump_stack.c:118
print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385
__kasan_report mm/kasan/report.c:545 [inline]
kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562
rtl_fw_do_work.cold+0x68/0x6a drivers/net/wireless/realtek/rtlwifi/core.c:93
request_firmware_work_func+0x12c/0x230 drivers/base/firmware_loader/main.c:1079
process_one_work+0x933/0x1520 kernel/workqueue.c:2272
worker_thread+0x64c/0x1120 kernel/workqueue.c:2418
kthread+0x38c/0x460 kernel/kthread.c:292
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:296
The buggy address belongs to the page:
page:00000000f54435b3 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1454cf
flags: 0x200000000000000()
raw: 0200000000000000 0000000000000000 ffffea00051533c8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff8881454cfe00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8881454cfe80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff8881454cff00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
^
ffff8881454cff80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
ffff8881454d0000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Reported-by: syzbot+65be4277f3c489293939@syzkaller.appspotmail.com
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201214053106.7748-1-pkshih@realtek.com
|
|
Fix the following NULL pointer dereference in mt76u_status_worker that
can occur if status thread runs before allocating tx queues
[ 31.395373] BUG: kernel NULL pointer dereference, address: 000000000000002c
[ 31.395769] #PF: supervisor read access in kernel mode
[ 31.395985] #PF: error_code(0x0000) - not-present page
[ 31.396178] PGD 0 P4D 0
[ 31.396277] Oops: 0000 [#1] SMP
[ 31.396430] CPU: 3 PID: 337 Comm: mt76-usb-status Not tainted 5.10.0-rc1-kvm+ #49
[ 31.396703] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-3.fc33 04/01/2014
[ 31.397048] RIP: 0010:mt76u_status_worker+0x2b/0x190
[ 31.397931] RSP: 0018:ffffc9000076fe98 EFLAGS: 00010282
[ 31.398118] RAX: 0000000000000001 RBX: ffff888111203fe8 RCX: 0000000000000000
[ 31.398400] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff888111203fe8
[ 31.398668] RBP: ffff888111201d00 R08: 000000000000038c R09: 000000000000009b
[ 31.398952] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 31.399235] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810c987300
[ 31.399494] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000
[ 31.399767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 31.399991] CR2: 000000000000002c CR3: 0000000103525000 CR4: 00000000000006a0
[ 31.400236] Call Trace:
[ 31.400348] ? schedule+0x3e/0xa0
[ 31.400514] __mt76_worker_fn+0x71/0xa0
[ 31.400634] ? mt76_get_min_avg_rssi+0x110/0x110
[ 31.400827] kthread+0x118/0x130
[ 31.400984] ? __kthread_bind_mask+0x60/0x60
[ 31.401212] ret_from_fork+0x1f/0x30
[ 31.401353] Modules linked in:
[ 31.401480] CR2: 000000000000002c
[ 31.401627] ---[ end trace 8bf174505cc34851 ]---
[ 31.401798] RIP: 0010:mt76u_status_worker+0x2b/0x190
[ 31.402636] RSP: 0018:ffffc9000076fe98 EFLAGS: 00010282
[ 31.402829] RAX: 0000000000000001 RBX: ffff888111203fe8 RCX: 0000000000000000
[ 31.403118] RDX: 0000000000000001 RSI: 0000000000000246 RDI: ffff888111203fe8
[ 31.403424] RBP: ffff888111201d00 R08: 000000000000038c R09: 000000000000009b
[ 31.403689] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 31.403933] R13: 0000000000000000 R14: 0000000000000000 R15: ffff88810c987300
[ 31.404209] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000
[ 31.404482] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 31.404726] CR2: 000000000000002c CR3: 0000000103525000 CR4: 00000000000006a0
[ 31.405294] mt76x0u: probe of 1-1:1.0 failed with error -110
[ 31.406007] usb 1-1: USB disconnect, device number 2
[ 31.840756] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[ 32.461295] usb 1-1: reset high-speed USB device number 3 using xhci_hcd
[ 32.659932] mt76x0u 1-1:1.0: ASIC revision: 76100002 MAC revision: 76502000
[ 33.197032] mt76x0u 1-1:1.0: EEPROM ver:02 fae:01
Fixes: 9daf27e62852 ("mt76: mt76u: use dedicated thread for status work")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/cd44dc407cf3e5f27688105d4a75fb1c68e62b06.1607419147.git.lorenzo@kernel.org
|
|
All these conditions are reversed so presumably most of the function is
dead code. This caused a spurious warning:
[ 95.734922] ath11k_pci 0000:06:00.0: failed to set sysclk: 0
Fixes: 0699940755e9 ("ath11k: pci: fix L1ss clock unstable problem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/X9nGDHiTh+Z+asDy@mwanda
|
|
The "if (!ret)" condition is inverted and it should be "if (ret)". It means
that we return success when we had intended to return an error code. This also
caused a spurious warning even when the suspend was successful:
[ 297.186612] ath11k_pci 0000:06:00.0: failed to suspend hif: 0
Fixes: d1b0c33850d2 ("ath11k: implement suspend for QCA6390 PCI devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/X9nF17L2/EKOSbn/@mwanda
|
|
For QCA6390, bss peer must be created before vdev is to start. This
change is to start vdev if a bss peer is created. Otherwise, ath11k
delays to start vdev.
This fixes an issue in a case where HT/VHT/HE settings change between
authentication and association, e.g., due to the user space request
to disable HT.
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201211051358.9191-1-cjhuang@codeaurora.org
|
|
During connect and disconnect stress test, crashed happened
because ar->rx_channel is NULL. Fix it by checking whether
ar->rx_channel is NULL.
Crash stack is as below:
RIP: 0010:ath11k_dp_rx_h_ppdu+0x110/0x230 [ath11k]
[ 5028.808963] ath11k_dp_rx_wbm_err+0x14a/0x360 [ath11k]
[ 5028.808970] ath11k_dp_rx_process_wbm_err+0x41c/0x520 [ath11k]
[ 5028.808978] ath11k_dp_service_srng+0x25e/0x2d0 [ath11k]
[ 5028.808982] ath11k_pci_ext_grp_napi_poll+0x23/0x80 [ath11k_pci]
[ 5028.808986] net_rx_action+0x27e/0x400
[ 5028.808990] __do_softirq+0xfd/0x2bb
[ 5028.808993] irq_exit+0xa6/0xb0
[ 5028.808995] do_IRQ+0x56/0xe0
[ 5028.808997] common_interrupt+0xf/0xf
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1
Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201211055613.9310-1-cjhuang@codeaurora.org
|
|
Currently the null check on a newly allocated skb is missing and
this can lead to a null pointer dereference is the allocation fails.
Fix this by adding a null check and returning -ENOMEM.
Addresses-Coverity: ("Dereference null return")
Fixes: 43ed15e1ee01 ("ath11k: put hw to DBS using WMI_PDEV_SET_HW_MODE_CMDID")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201214232417.84556-1-colin.king@canonical.com
|
|
Currently pmac32_defconfig with SMP=y doesn't build:
arch/powerpc/platforms/powermac/smp.c:
error: implicit declaration of function 'cleanup_cpu_mmu_context'
It would be nice for consistency if all platforms clear mm_cpumask and
flush TLBs on unplug, but the TLB invalidation bug described in commit
01b0f0eae081 ("powerpc/64s: Trim offlined CPUs from mm_cpumasks") only
applies to 64s and for now we only have the TLB flush code for that
platform.
So just add an empty version for 32-bit Book3S.
Fixes: 01b0f0eae081 ("powerpc/64s: Trim offlined CPUs from mm_cpumasks")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Change log based on comments from Nick]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC OMAP GenPD updates from Arnd Bergmann:
"These are additional updates for the power domain support on OMAP,
moving to an implementation based on device tree information instead
of SoC specific code. This is the latest step in the ongoing process
for moving code out of arch/arm/mach-omap2.
I kept this separate from the other driver changes since it touches
code in multiple areas"
* tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
ARM: OMAP2+: Fix am4 only build after genpd changes
ARM: dts: Configure power domain for omap5 dss
ARM: dts: omap5: add remaining PRM instances
soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances
ARM: OMAP2+: Drop legacy platform data for dra7 gpmc
ARM: dts: Configure interconnect target module for dra7 iva
ARM: dts: dra7: add remaining PRM instances
soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances
clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks
ARM: OMAP2+: Drop legacy platform data for omap4 gpmc
ARM: OMAP2+: Drop legacy platform data for omap4 iva
ARM: dts: Configure power domain for omap4 dsp
ARM: dts: Configure power domain for omap4 dss
ARM: dts: omap4: add remaining PRM instances
soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances
clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks
ARM: OMAP2+: Drop legacy remaining legacy platform data for am4
ARM: dts: Use simple-pm-bus for genpd for am4 l3
ARM: dts: Move am4 l3 noc to a separate node
ARM: dts: Use simple-pm-bus for genpd for am4 l4_per
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are a couple of subsystems maintained by other people that merge
their drivers through the SoC tree, those changes include:
- The SCMI firmware framework gains support for sensor notifications
and for controlling voltage domains.
- A large update for the Tegra memory controller driver, integrating
it better with the interconnect framework
- The memory controller subsystem gains support for Mediatek MT8192
- The reset controller framework gains support for sharing pulsed
resets
For Soc specific drivers in drivers/soc, the main changes are
- The Allwinner/sunxi MBUS gets a rework for the way it handles
dma_map_ops and offsets between physical and dma address spaces.
- An errata fix plus some cleanups for Freescale Layerscape SoCs
- A cleanup for renesas drivers regarding MMIO accesses.
- New SoC specific drivers for Mediatek MT8192 and MT8183 power
domains
- New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC
identification.
- Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and
SDX55.
- A rework of the TI AM33xx 'genpd' power domain support to use
information from DT instead of platform data
- Support for TI AM64x SoCs
- Allow building some Amlogic drivers as modules instead of built-in
Finally, there are numerous cleanups and smaller bug fixes for
Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips,
Renesas, and Xilinx SoCs"
* tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits)
soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS
firmware: xilinx: Properly align function parameter
firmware: xilinx: Add a blank line after function declaration
firmware: xilinx: Remove additional newline
firmware: xilinx: Fix kernel-doc warnings
firmware: xlnx-zynqmp: fix compilation warning
soc: xilinx: vcu: add missing register NUM_CORE
soc: xilinx: vcu: use vcu-settings syscon registers
dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding
soc: xilinx: vcu: drop useless success message
clk: samsung: mark PM functions as __maybe_unused
soc: samsung: exynos-chipid: initialize later - with arch_initcall
soc: samsung: exynos-chipid: order list of SoCs by name
memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe()
memory: ti-emif-sram: only build for ARMv7
memory: tegra30: Support interconnect framework
memory: tegra20: Support hardware versioning and clean up OPP table initialization
dt-bindings: memory: tegra20-emc: Document opp-supported-hw property
soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe()
reset-controller: ti: force the write operation when assert or deassert
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC defconfig updates from Arnd Bergmann:
"These are the usual defconfig updates, adding support for additional
modules and updating some files according to changes in Kconfig.
I also include the removal of CONFIG_BACKLIGHT_GENERIC across multiple
architectures, after the driver was removed"
* tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (41 commits)
powerpc/configs: drop unused BACKLIGHT_GENERIC option
parisc: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: drop unused BACKLIGHT_GENERIC option
ARM: configs: drop unused BACKLIGHT_GENERIC option
arm64: defconfig: Enable more Librem 5 hardware
arm64: defconfig: Enable RTC_DRV_HYM8563
arm64: defconfig: Enable USB_SERIAL_CP210X
arm64: defconfig: Enable PHY_ROCKCHIP_INNO_DSIDPHY
arm64: defconfig: Enable ROCKCHIP_LVDS
arm64: defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: Enable ARM SCMI protocol and drivers
ARM: multi_v7_defconfig: enable STM32 dfsdm audio support
ARM: multi_v7_defconfig: enable STM32 spdifrx support
ARM: multi_v7_defconfig: enable STUSB160X Type-C port controller support
ARM: multi_v7_defconfig: add STM32 crypto support
ARM: multi_v7_defconfig: enable counter subsystem and stm32 counter drivers
ARM: multi_v7_defconfig: make Samsung Exynos EHCI driver a module
arm64: defconfig: Enable Qualcomm PON driver
ARM: omap2plus_defconfig: Enable TI eQEP counter driver
ARM: multi_v7_defconfig: ti: Enable networking options for nfs boot
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"These are updates for SoC specific code, mostly in the 32-bit
architecture:
- A rework for handling MMIO accesses in Renesas SoCs in a more
portable way
- Updates to SoC version detection in NXP i.MX SoCs.
- Smaller bug fixes for OMAP, Samsung, Marvell, Amlogic"
* tag 'arm-soc-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: Kconfig: meson: drop pinctrl
ARM: mxs: Add serial number support for i.MX23, i.MX28 SoCs
MAINTAINERS: switch mvebu tree to kernel.org
MAINTAINERS: Add an entry for MikroTik CRS3xx 98DX3236 boards
ARM: shmobile: Stop using __raw_*() I/O accessors
ARM: shmobile: sh73a0: Remove obsolete static mapping
ARM: shmobile: sh73a0: Use ioremap() to map SMP registers
ARM: shmobile: sh73a0: Use ioremap() to map L2C registers
ARM: shmobile: r8a7779: Remove obsolete static mappings
ARM: shmobile: r8a7779: Use ioremap() to map SMP registers
ARM: shmobile: r8a7779: Use ioremap() to map INTC2 registers
ARM: shmobile: r8a7778: Introduce HPBREG_BASE
ARM: OMAP1: clock: Use IS_ERR_OR_NULL() to clean code
ARM: OMAP2+: Remove redundant null check before clk_prepare_enable/clk_disable_unprepare
ARM: OMAP2+: Remove redundant assignment to variable ret
ARM: OMAP2+: Fix kfree NULL pointer in omap2xxx_clkt_vps_init
ARM: OMAP2+: Fix memleak in omap2xxx_clkt_vps_init
ARM: exynos: extend cpuidle support to P4 Note boards
ARM: imx: mach-imx6q: correctly identify i.MX6QP SoCs
ARM: imx: imx7ulp: Add a comment explaining the B2 silicon version
...
|
|
This patch cleared use_ack and use_map when dropping other suboptions to
fix the following syzkaller BUG:
[ 15.223006] BUG: unable to handle page fault for address: 0000000000223b10
[ 15.223700] #PF: supervisor read access in kernel mode
[ 15.224209] #PF: error_code(0x0000) - not-present page
[ 15.224724] PGD b8d5067 P4D b8d5067 PUD c0a5067 PMD 0
[ 15.225237] Oops: 0000 [#1] SMP
[ 15.225556] CPU: 0 PID: 7747 Comm: syz-executor Not tainted 5.10.0-rc6+ #24
[ 15.226281] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 15.227292] RIP: 0010:skb_release_data+0x89/0x1e0
[ 15.227816] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34
[ 15.229669] RSP: 0018:ffffc900019c7c08 EFLAGS: 00010293
[ 15.230188] RAX: ffff88800daad900 RBX: 0000000000223b08 RCX: 0000000000000006
[ 15.230895] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6dc700
[ 15.231593] RBP: ffff88807f71a4c0 R08: 0000000000000001 R09: 0000000000000001
[ 15.232299] R10: ffffc900019c7c18 R11: 0000000000000000 R12: ffff88807f71a4f0
[ 15.233007] R13: 0000000000000000 R14: ffff88807f6dc700 R15: 0000000000000002
[ 15.233714] FS: 00007f65d9b5f700(0000) GS:ffff88807c400000(0000) knlGS:0000000000000000
[ 15.234509] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.235081] CR2: 0000000000223b10 CR3: 000000000b883000 CR4: 00000000000006f0
[ 15.235788] Call Trace:
[ 15.236042] skb_release_all+0x28/0x30
[ 15.236419] __kfree_skb+0x11/0x20
[ 15.236768] tcp_data_queue+0x270/0x1240
[ 15.237161] ? tcp_urg+0x50/0x2a0
[ 15.237496] tcp_rcv_established+0x39a/0x890
[ 15.237997] ? mark_held_locks+0x49/0x70
[ 15.238467] tcp_v4_do_rcv+0xb9/0x270
[ 15.238915] __release_sock+0x8a/0x160
[ 15.239365] release_sock+0x32/0xd0
[ 15.239793] __inet_stream_connect+0x1d2/0x400
[ 15.240313] ? do_wait_intr_irq+0x80/0x80
[ 15.240791] inet_stream_connect+0x36/0x50
[ 15.241275] mptcp_stream_connect+0x69/0x1b0
[ 15.241787] __sys_connect+0x122/0x140
[ 15.242236] ? syscall_enter_from_user_mode+0x17/0x50
[ 15.242836] ? lockdep_hardirqs_on_prepare+0xd4/0x170
[ 15.243436] __x64_sys_connect+0x1a/0x20
[ 15.243924] do_syscall_64+0x33/0x40
[ 15.244313] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 15.244821] RIP: 0033:0x7f65d946e469
[ 15.245183] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48
[ 15.247019] RSP: 002b:00007f65d9b5eda8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
[ 15.247770] RAX: ffffffffffffffda RBX: 000000000049bf00 RCX: 00007f65d946e469
[ 15.248471] RDX: 0000000000000010 RSI: 00000000200000c0 RDI: 0000000000000005
[ 15.249205] RBP: 000000000049bf00 R08: 0000000000000000 R09: 0000000000000000
[ 15.249908] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049bf0c
[ 15.250603] R13: 00007fffe8a25cef R14: 00007f65d9b3f000 R15: 0000000000000003
[ 15.251312] Modules linked in:
[ 15.251626] CR2: 0000000000223b10
[ 15.251965] BUG: kernel NULL pointer dereference, address: 0000000000000048
[ 15.252005] ---[ end trace f5c51fe19123c773 ]---
[ 15.252822] #PF: supervisor read access in kernel mode
[ 15.252823] #PF: error_code(0x0000) - not-present page
[ 15.252825] PGD c6c6067 P4D c6c6067 PUD c0d8067
[ 15.253294] RIP: 0010:skb_release_data+0x89/0x1e0
[ 15.253910] PMD 0
[ 15.253914] Oops: 0000 [#2] SMP
[ 15.253917] CPU: 1 PID: 7746 Comm: syz-executor Tainted: G D 5.10.0-rc6+ #24
[ 15.253920] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 15.254435] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34
[ 15.254899] RIP: 0010:skb_release_data+0x89/0x1e0
[ 15.254902] Code: 5b 5d 41 5c 41 5d 41 5e 41 5f e9 02 06 8a ff e8 fd 05 8a ff 45 31 ed 80 7d 02 00 4c 8d 65 30 74 55 e8 eb 05 8a ff 49 8b 1c 24 <4c> 8b 7b 08 41 f6 c7 01 0f 85 18 01 00 00 e8 d4 05 8a ff 8b 43 34
[ 15.254905] RSP: 0018:ffffc900019bfc08 EFLAGS: 00010293
[ 15.255376] RSP: 0018:ffffc900019c7c08 EFLAGS: 00010293
[ 15.255580]
[ 15.255583] RAX: ffff888004a7ac80 RBX: 0000000000000040 RCX: 0000000000000000
[ 15.255912]
[ 15.256724] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6ddd00
[ 15.257620] RAX: ffff88800daad900 RBX: 0000000000223b08 RCX: 0000000000000006
[ 15.259817] RBP: ffff88800e9006c0 R08: 0000000000000000 R09: 0000000000000000
[ 15.259818] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88800e9006f0
[ 15.259820] R13: 0000000000000000 R14: ffff88807f6ddd00 R15: 0000000000000002
[ 15.259822] FS: 00007fae4a60a700(0000) GS:ffff88807c500000(0000) knlGS:0000000000000000
[ 15.259826] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.260296] RDX: 0000000000000000 RSI: ffffffff818e06c5 RDI: ffff88807f6dc700
[ 15.262514] CR2: 0000000000000048 CR3: 000000000b89c000 CR4: 00000000000006e0
[ 15.262515] Call Trace:
[ 15.262519] skb_release_all+0x28/0x30
[ 15.262523] __kfree_skb+0x11/0x20
[ 15.263054] RBP: ffff88807f71a4c0 R08: 0000000000000001 R09: 0000000000000001
[ 15.263680] tcp_data_queue+0x270/0x1240
[ 15.263843] R10: ffffc900019c7c18 R11: 0000000000000000 R12: ffff88807f71a4f0
[ 15.264693] ? tcp_urg+0x50/0x2a0
[ 15.264856] R13: 0000000000000000 R14: ffff88807f6dc700 R15: 0000000000000002
[ 15.265720] tcp_rcv_established+0x39a/0x890
[ 15.266438] FS: 00007f65d9b5f700(0000) GS:ffff88807c400000(0000) knlGS:0000000000000000
[ 15.267283] ? __schedule+0x3fa/0x880
[ 15.267287] tcp_v4_do_rcv+0xb9/0x270
[ 15.267290] __release_sock+0x8a/0x160
[ 15.268049] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 15.268788] release_sock+0x32/0xd0
[ 15.268791] __inet_stream_connect+0x1d2/0x400
[ 15.268795] ? do_wait_intr_irq+0x80/0x80
[ 15.269593] CR2: 0000000000223b10 CR3: 000000000b883000 CR4: 00000000000006f0
[ 15.270246] inet_stream_connect+0x36/0x50
[ 15.270250] mptcp_stream_connect+0x69/0x1b0
[ 15.270253] __sys_connect+0x122/0x140
[ 15.271097] Kernel panic - not syncing: Fatal exception
[ 15.271820] ? syscall_enter_from_user_mode+0x17/0x50
[ 15.283542] ? lockdep_hardirqs_on_prepare+0xd4/0x170
[ 15.284275] __x64_sys_connect+0x1a/0x20
[ 15.284853] do_syscall_64+0x33/0x40
[ 15.285369] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 15.286105] RIP: 0033:0x7fae49f19469
[ 15.286638] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48
[ 15.289295] RSP: 002b:00007fae4a609da8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
[ 15.290375] RAX: ffffffffffffffda RBX: 000000000049bf00 RCX: 00007fae49f19469
[ 15.291403] RDX: 0000000000000010 RSI: 00000000200000c0 RDI: 0000000000000005
[ 15.292437] RBP: 000000000049bf00 R08: 0000000000000000 R09: 0000000000000000
[ 15.293456] R10: 0000000000000000 R11: 0000000000000246 R12: 000000000049bf0c
[ 15.294473] R13: 00007fff0004b6bf R14: 00007fae4a5ea000 R15: 0000000000000003
[ 15.295492] Modules linked in:
[ 15.295944] CR2: 0000000000000048
[ 15.296567] Kernel Offset: disabled
[ 15.296941] ---[ end Kernel panic - not syncing: Fatal exception ]---
Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: 84dfe3677a6f (mptcp: send out dedicated ADD_ADDR packet)
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Link: https://lore.kernel.org/r/ccca4e8f01457a1b495c5d612ed16c5f7a585706.1608010058.git.geliangtang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The BIT() macro is not available for the UAPI headers. Moreover, it can
be defined differently in user space headers. Thus, replace its usage
with the _BITUL() macro which is already used in other macro definitions
in <linux/devlink.h>.
Fixes: dc64cc7c6310 ("devlink: Add devlink reload limit option")
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Link: https://lore.kernel.org/r/20201215102531.16958-1-tklauser@distanz.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull VFIO updates from Alex Williamson:
- Fix uninitialized list walk in error path (Eric Auger)
- Use io_remap_pfn_range() (Jason Gunthorpe)
- Allow fallback support for NVLink on POWER8 (Alexey Kardashevskiy)
- Enable mdev request interrupt with CCW support (Eric Farman)
- Enable interface to iommu_domain from vfio_group (Lu Baolu)
* tag 'vfio-v5.11-rc1' of git://github.com/awilliam/linux-vfio:
vfio/type1: Add vfio_group_iommu_domain()
vfio-ccw: Wire in the request callback
vfio-mdev: Wire in a request handler for mdev parent
vfio/pci/nvlink2: Do not attempt NPU2 setup on POWER8NVL NPU
vfio-pci: Use io_remap_pfn_range() for PCI IO memory
vfio/pci: Move dummy_resources_list init in vfio_pci_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- AMD SFH (Sensor Fusion Hub) support (Sandeep Singh)
- increase of maximum HID report size to 16KB in order to support some
of the modern devices (Dean Camera)
- control interface support for hidraw (Dean Camera)
- Sony DS4 power and firmware reporting fixes (Roderick Colenbrander)
- support for ghlive PS3/WII U dongles (Pascal Giard)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
HID: i2c-hid: add Vero K147 to descriptor override
HID: ite: Add support for Acer S1002 keyboard-dock
HID: sony: support for ghlive ps3/wii u dongles
HID: hidraw: Add additional hidraw input/output report ioctls.
HID: Increase HID maximum report size to 16KB
HID: elecom: drop stray comment
HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube Adapter
HID: elecom: add support for EX-G M-XGL20DLBK wireless mouse
HID: elecom: rewrite report based on model specific parameters
HID: wacom: Constify attribute_groups
HID: input: Fix fall-through warnings for Clang
HID: usbhid: Fix fall-through warnings for Clang
HID: logitech-hidpp: Add hid_device_id for V470 bluetooth mouse
HID: intel-ish-hid: Remove unnecessary assignment to variable rv
HID: sony: Workaround for DS4 dongle hotplug kernel crash.
HID: sony: Don't use fw_version/hw_version for sysfs cleanup.
HID: sony: Report more accurate DS4 power status.
SFH: fix error return check for -ERESTARTSYS
HID: SFH: Add documentation
HID: hid-input: occasionally report stylus battery even if not changed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add vendor prefixes for bm, gpio-key, mentor, FII, and Ampere
- Add ADP5585/ADP5589 and delta,q54sj108a2 to trivial-devices.yaml
- Convert fixed-partitions, i2c-gate and fsl,dpaa2-console bindings to
schemas
- Drop PicoXcell bindings
- Drop unused and undocumented 'pnx,timeout' property from LPC32xx
- Add 'dynamic-power-coefficient' to Mali GPU bindings
- Make 'make dt_binding_check' not error out on warnings
- Various minor binding fixes
* tag 'devicetree-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (22 commits)
dt-bindings: mali-bifrost: Add dynamic-power-coefficient
dt-bindings: mali-midgard: Add dynamic-power-coefficient
dt-bindings: i2c: dw: cancel mandatory requirements for "#address-cells" and "#size-cells"
dt-bindings: Remove PicoXcell bindings
ARM: dts: lpc32xx: Remove unused and undocumented 'pnx,timeout'
dt-bindings: mtd: convert "fixed-partitions" to the json-schema
dt-bindings: vendor-prefixes: Add undocumented bm, gpio-key, and mentor prefixes
dt-bindings: pci: rcar-pci-ep: Document missing interrupts property
dt-bindings: vendor-prefixes: Add an entry for AmpereComputing.com
dt-bindings: vendor-prefixes: correct the spelling of TQ-Systems GmbH
dt-bindings: mfd: fix stm32 timers example
dt-bindings: trivial-devices: Add delta,q54sj108a2
dt-bindings:i2c:i2c-gate: txt to yaml conversion
dt-bindings: add ADP5585/ADP5589 entries to trivial-devices
dt-bindings: Correct GV11B GPU register sizes
dt-bindings: vendor-prefixes: Add FII
dt-bindings: Fix typo on the DesignWare IP reset bindings documentation
dt-bindings: Fix error in 'make dtbs_check' when using DT_SCHEMA_FILES
dt-bindings: arm: vt8500: remove redundant white-spaces
dt-bindings: fsl-imx-drm: fix example compatible string
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v5.11 kernel.
Drivers, drivers and drivers. Not a single core change.
Some new stuff, especially a bunch of new Intel, Qualcomm and Ocelot
SoCs.
As part of the modularization attempt, I applied one patch affecting
the firmware subsystem as a functional (not syntactic/semantic)
dependency and then it blew up in our face, so I had to revert it,
bummer. It will come in later, through that subsystem, I guess.
New drivers:
- New driver for the Microchip Serial GPIO "SGPIO".
- Qualcomm SM8250 LPASS (Low Power Audio Subsystem) GPIO driver.
New subdrivers:
- Intel Lakefield subdriver.
- Intel Elkhart Lake subdriver.
- Intel Alder Lake-S subdriver.
- Qualcomm MSM8953 subdriver.
- Qualcomm SDX55 subdriver.
- Qualcomm SDX55 PMIC subdriver.
- Ocelot Luton SoC subdriver.
- Ocelot Serval SoC subdriver.
Modularization:
- The Meson driver can now be built as modules.
- The Qualcomm driver(s) can now be built as modules.
Incremental improvements:
- The Intel driver now supports pin configuration for GPIO-related
configurations.
- A bunch of Renesas PFC drivers have been augmented with support for
QSPI pins, groups and functions.
- Non-critical fixes to the irq handling in the Allwinner Sunxi
driver"
* tag 'pinctrl-v5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
pinctrl/spear: simplify the return expression of spear300_pinctrl_probe()
pinctrl: mediatek: simplify the return expression of mtk_pinconf_bias_disable_set_rev1()
dt-bindings: pinctrl: pinctrl-microchip-sgpio: Add irq support
pinctrl: pinctrl-microchip-sgpio: Add irq support (for sparx5)
pinctrl: qcom: Add sm8250 lpass lpi pinctrl driver
dt-bindings: pinctrl: qcom: Add sm8250 lpass lpi pinctrl bindings
pinctrl: qcom-pmic-gpio: Add support for pmx55
dt-bindings: pinctrl: qcom-pmic-gpio: Add pmx55 support
pinctrl: pinctrl-microchip-sgpio: Mark some symbols with static keyword
pinctrl: at91-pio4: Make PINCTRL_AT91PIO4 depend on HAS_IOMEM to fix build error
pinctrl: mtk: Fix low level output voltage issue
pinctrl: falcon: add missing put_device() call in pinctrl_falcon_probe()
pinctrl: actions: pinctrl-s500: Constify s500_padinfo[]
pinctrl: pinctrl-microchip-sgpio: Add OF config dependency
pinctrl: pinctrl-microchip-sgpio: Add pinctrl driver for Microsemi Serial GPIO
dt-bindings: pinctrl: Add bindings for pinctrl-microchip-sgpio driver
pinctrl: at91-pio4: add support for fewer lines on last PIO bank
pinctrl: sunxi: Always call chained_irq_{enter, exit} in sunxi_pinctrl_irq_handler
pinctrl: sunxi: Mark the irq bank not found in sunxi_pinctrl_irq_handler() with WARN_ON
pinctrl: sunxi: fix irq bank map for the Allwinner A100 pin controller
...
|
|
The ndo_start_xmit() method must not attempt to free the skb to transmit
when returning NETDEV_TX_BUSY. Therefore, make sure the
korina_send_packet() function returns NETDEV_TX_OK when it frees a packet.
Fixes: ef11291bcd5f ("Add support the Korina (IDT RC32434) Ethernet MAC")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201214220952.19935-1-vincent.stehle@laposte.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Fix refcounting for unpartitioned MTDs
- Fix misspelled function parameter 'section'
- Remove unneeded break
- cmdline parser: Fix parsing of part-names with colons
- mtdpart: Fix misdocumented function parameter 'mtd'
MTD devices:
- phram:
- Allow the user to set the erase page size
- File headers are not good candidates for kernel-doc
- physmap-bt1-rom: Fix __iomem addrspace removal warning
- plat-ram: correctly free memory on error path in platram_probe()
- powernv_flash: Add function names to headers and fix 'dev'
- docg3: Fix kernel-doc 'bad line' and 'excessive doc' issues
UBI cleanup fixes:
- gluebi: Fix misnamed function parameter documentation
- wl: Fix a couple of kernel-doc issues
- eba: Fix a couple of misdocumentation issues
- kapi: Correct documentation for 'ubi_leb_read_sg's 'sgl' parameter
- Document 'ubi_num' in struct mtd_dev_param
Generic NAND core ECC management:
- Add an I/O request tweaking mechanism
- Entire rework of the software BCH ECC driver, creation of a real
ECC engine, getting rid of raw NAND structures, migration to more
generic prototypes, misc fixes and style cleanup. Moved now to the
Generic NAND layer.
- Entire rework of the software Hamming ECC driver, creation of a
real ECC engine, getting rid of raw NAND structures, misc renames,
comment updates, cleanup, and style fixes. Moved now to the generic
NAND layer.
- Necessary plumbing at the NAND level to retrieve generic NAND ECC
engines (softwares and on-die).
- Update of the bindings.
Raw NAND core:
- Geting rid of the chip->ecc.priv entry.
- Fix miscellaneous typos in kernel-doc
Raw NAND controller drivers:
- Arasan: Document 'anfc_op's 'buf' member
- AU1550: Ensure the presence of the right includes
- Brcmnand: Demote non-conformant kernel-doc headers
- Cafe: Remove superfluous param doc and add another
- Davinci: Do not use extra dereferencing
- Diskonchip: Marking unused variables as __always_unused
- GPMI:
- Fix the driver only sense CS0 R/B issue
- Fix the random DMA timeout issue
|
