summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2020-12-03media: ccs: Replace somewhat harsh internal checks based on BUG with WARN_ONSakari Ailus
If an internal driver error was encountered, BUG was issued. Instead, do less harsh WARN_ON_ONCE and try to manage with the consequences. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: The functions to get compose or crop rectangle never return NULLSakari Ailus
The NULL check is not needed as the functions do not return NULL. Remove the check (and BUG). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Stop reading arrays after the first zeroSakari Ailus
The register arrays have a certain size but not all the entries will be relevant. In practice reading can be stopped after encountering a zero value in the array. Do that to avoid extra reads. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Read CCS static data from firmware binariesSakari Ailus
Read the CCS static data for sensors and modules. The files are expected to be found in "ccs" directory. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Combine revision number major and minor into oneSakari Ailus
The module revision number major and minor are both 8 bits while the sensor revision number is 16 bits. Combine the module revision into one number. This also adds printing the lowest 8 bits of the module version through the sysfs attribute. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Add CCS static data parser librarySakari Ailus
Add a parser library for parsing the CCS static data format. The library may be also compiled in user space as the format has uses also in the user space. Therefore it is dual licensed under the 3-clause BSD license as well. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Fix obtaining bus information from firmwareSakari Ailus
Let v4l2_fwnode_endpoint_alloc_parse to figure out the type of the data bus. As the old bindings did not require the "bus-type" property, we need to rely on guessing between CSI-2 D-PHY and CCP2. Setting the type to CSI-2 D-PHY will parse just that and succeed even if no data-lanes are set. Also add a comment on the matter to the driver to avoid breaking this in the future. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Make hwcfg part of the device specific structSakari Ailus
There's no need to allocate the hardware configuration struct separately. Put it in struct ccs_sensor. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Remove remaining support for platform dataSakari Ailus
No need to support platform data; remove support for conveying hardware configuration that way. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Remove the I²C ID tableSakari Ailus
The I²C ID table is no longer needed; remove it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Add CCS ACPI device IDSakari Ailus
The CCS compliant sensors use device ID "MIPI0200". Use this id for ACPI device matching. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Add device compatible identifiers for telling SMIA and CCS apartSakari Ailus
Add device data specific to DT compatible ID to tell SMIA and CCS devices apart already in power-up. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ccs: Add MIPI CCS compatible stringsSakari Ailus
Add "mipi-ccs-1.0" and "mipi-ccs-1.1" compatible strings to the CCS driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: Documentation: ccs: Reorder SPDX and copyright notice linesSakari Ailus
Move the SPDX tag to the top, placing the copyright notice after that. This aligns the file with existing practices. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: Documentation: ccs: Rename ccs-regs.txt as ccs-regs.ascSakari Ailus
As documentation used to be in .txt files before converting to ReST, rename ccs-regs.txt to avoid it being taken as documentation that pre-dates ReST conversion and so target for further conversion to ReST. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: rockchip: rkisp1: remove useless debugfs checksDan Carpenter
The debugfs_create_dir() function never returns NULLs so this code will never be executed. It's not intended that callers will check for debugfs errors in the normal case and it's not necessary in this driver, so we can just delete this code. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: stop pretending to maintain cafe and ov7670Jonathan Corbet
It's been a long time since I could credibly claim to be maintaining these drivers; I'm not even sure my hardware works anymore. Mark them orphan. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: saa7146: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'saa7146_pgtable_alloc()' GFP_KERNEL can be used because the callers are either .buf_prepare functions or function that already use GFP_KERNEL (hidden in a 'vmalloc_32()' call). When memory is allocated in 'saa7146_init_one()' GFP_KERNEL can be used because it is probe function and no lock is taken in the between. When memory is allocated in 'saa7146_vv_init()' GFP_KERNEL can be used because this function already uses GFP_KERNEL and no lock is taken in the between. When memory is allocated in 'vbi_workaround()' GFP_KERNEL can be used because it is only called from a .open function. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: ttpci: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'av7110_attach()' GFP_KERNEL can be used because this flag is already used above in the same function and no lock is taken in the between. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: solo6x10: switch from 'pci_' to 'dma_' APIChristophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'snd_solo_pcm_open()' (solo6x10-g723.c) GFP_KERNEL can be used because this flag is already used jew a few lines above. When memory is allocated in 'solo_enc_alloc()' (solo6x10-v4l2-enc.c) GFP_KERNEL can be used because this flag is already used jew a few lines above. When memory is allocated in 'solo_enc_v4l2_init()' (solo6x10-v4l2-enc.c) GFP_KERNEL can be used because calls 'solo_enc_alloc()' which already uses this flag. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Ismael Luceno <ismael@iodev.co.uk> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: si4713: remove trailing semicolon in macro definitionTom Rix
The macro use will already have a semicolon. [hverkuil: also add () around p in the macro] Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: staging/imx: Increase IMX_MEDIA_EOF_TIMEOUTFabio Estevam
When trying to capture video on a imx6dl-based board with an ADV7280, the following timeout error is observed: v4l2-ctl --stream-mmap -d /dev/video2 [ 22.792049] ipu1_csi1: EOF timeout VIDIOC_DQBUF: failed: Input/output error Increase the IMX_MEDIA_EOF_TIMEOUT to avoid such problem. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: camss: Make use of V4L2_CAP_IO_MCAndrey Konovalov
Implement mbus_code filtering for format enumeration. Without this patch libcamera errors out with: "ERROR V4L2 v4l2_videodevice.cpp:982 /dev/video0[cap]: Media bus code filtering not supported by the device" This is the second version of this change which handles the case of several pixel formats corresponding to one media bus format correctly. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: Revert "media: camss: Make use of V4L2_CAP_IO_MC"Andrey Konovalov
This reverts commit c90f1178dcac30dee5ddd29ec0513e7589aa866e. The assumption of "Each entry in formats[] table has unique mbus_code" is valid for the RDI entities, but not for the PIX ones. Reverting this patch and creating a new one which handles the PIX entities correctly results in smaller and more straightforward patch than doing the changes on top of the current version. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: rockchip: rkisp1: Fix typos in comments and macro definitionsPeilin Ye
Fix 4 typos under drivers/media/platform/rockchip/rkisp1/ found by checkpatch, including the RKISP1_CIF_MI_{M,S}P_PINGPONG_ENABLE macro definitions. Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: rcar-vin: Remove unused macroJacopo Mondi
The VNCSI_IFMD_CSI_CHSEL_MASK is not used: remove it. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: fsl-viu: Use the ioread/write32be() accessorsFabio Estevam
Since commit 29d750686331 ("media: fsl-viu: allow building it with COMPILE_TEST") there were several attempts to fix build failures on PPC, MICROBLAZE and M68K. However, such errors are still present as reported by kbuild robot. Fix the problem by using the ioread/write32be() accessors, which build fine on all platforms. Reported-by: kernel test robot <lkp@intel.com> Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: platform: exynos4-is: remove all references to physical addressesMarek Szyprowski
This driver always operates on the DMA/IOVA addresses, so calling them physical addresses is misleading, although when no IOMMU is used they equal each other. Fix this by renaming all such entries to 'addr' and adjusting comments. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: adv748x: Configure device when resuming from sleepNiklas Söderlund
If the device is powered off (for example during system suspend to ram) the devices loses its configuration, especially the slave i2c mappings and other configuration set at probe time. This renders the device unusable and the only way to recover is to unbind and rebind the device to the driver to run the probe setup again. Add an early resume callback that reinitializes the device and setup the slave i2c address mappings and other probe time configuration. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: adv748x: csi2: Set virtual channel when device is resetNiklas Söderlund
It's not enough to set the CSI-2 virtual channel for TXA and TXB during probe: it also needs to be set when the device is reset. Move the virtual channel selection to adv748x_reset() that is called during probe and when the device needs to be reset. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: adv748x: afe: Select input port when device is resetNiklas Söderlund
It's not enough to select the AFE input port during probe: it also needs to be set when the device is reset. Move the port selection to adv748x_reset() that is called during probe and when the device needs to be reset. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: adv748x: Only set i2c addresses once during probeNiklas Söderlund
During probe the i2c slave addresses are set two times in a row, once in adv748x_initialise_clients() and once directly after in adv748x_reset(). Remove the call to adv748x_set_slave_addresses() in adv748x_initialise_clients() as it's only called during probe while adv748x_reset() is called during probe and normal operation. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: saa7146: fix array overflow in vidioc_s_audio()Dan Carpenter
The "a->index" value comes from the user via the ioctl. The problem is that the shift can wrap resulting in setting "mxb->cur_audinput" to an invalid value, which later results in an array overflow. Fixes: 6680427791c9 ("[media] mxb: fix audio handling") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: meson: vdec: add G12/SM1 to module descriptionChristian Hewitt
The meson vdec driver also supports Amlogic G12/SM1 hardware. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: s5p-jpeg: handle error condition in s5p_jpeg_probeBaskov Evgeniy
If an error happens in jpeg_get_drv_data(), i.e. match fails, jpeg->variant field is NULL, so we cannot access it. Consider device probe failed if jpeg->variant is NULL. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Baskov Evgeniy <baskov@ispras.ru> Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: cedrus: Add support for VP8 decodingJernej Skrabec
VP8 in Cedrus shares same engine as H264. Note that it seems necessary to call bitstream parsing functions, to parse frame header, otherwise decoded image is garbage. This is contrary to what is driver supposed to do. However, values are not really used, so this might be acceptable. It's possible that bitstream parsing functions set some internal VPU state, which is later necessary for proper decoding. Biggest suspect is "VP8 probs update" trigger. Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: hantro: Use VP8 lengths defined in uapiEmmanuel Gil Peyrot
Use the new defines instead of hardcoding the VP8 lengths. [hverkuil: add commit log] Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: uapi: Expose VP8 probability lengths as definesEmmanuel Gil Peyrot
These values will be used by various drivers implementing the VP8 stateless API. This had been suggested by Ezequiel Garcia for the Cedrus VP8 driver. Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: mtk-vpu: dump VPU status when IPI times outIrui Wang
when IPI time out, dump VPU status to get more debug information Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: mtk-vpu: VPU should be in idle state before system is suspendedIrui Wang
VPU should be in idle state before system is suspended or it will work abnormally like VPU program counter not in a correct address or VPU reset Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: Alexandre Courbot <acourbot@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: coda: Convert the driver to DT-onlyFabio Estevam
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code by removing the unused non-DT support. Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: tvp5150: Fix wrong return value of tvp5150_parse_dt()Zhang Xiaoxu
If of_graph_get_endpoint_by_regs() return NULL, it will return 0 rather than an errno, because we doesn't initialize the return value. Fixes: 0556f1d580d4 ("media: tvp5150: add input source selection of_graph support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: cx88: use ARRAY_SIZEXu Wang
Use ARRAY_SIZE instead of dividing sizeof array with sizeof an element Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: cedrus: Add support for V3sMartin Cerveny
V3s video engine runs at lower speed and support video decoder for H.264 and JPEG/MJPEG only. Signed-off-by: Martin Cerveny <m.cerveny@computer.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: dt-bindings: media: cedrus: Add V3s compatibleMartin Cerveny
Allwinner V3s SoC contains video engine. Add compatible for it. Signed-off-by: Martin Cerveny <m.cerveny@computer.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: cedrus: Register all codecs as capabilityMartin Cerveny
All codecs should have capabilities. For example "Allwinner V3s" does not support "MPEG2". Signed-off-by: Martin Cerveny <m.cerveny@computer.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: cx23885: add more quirks for reset DMA on some AMD IOMMUDaniel Lee Kruse
On AMD Family 15h (Models 30h-3fh), I/O Memory Management Unit RiSC engine sometimes stalls, requiring a reset. As result, MythTV and w-scan won't scan channels on the AMD Kaveri APU with the Hauppauge QuadHD TV tuner card. For the solution I added the Input/Output Memory Management Unit's PCI Identity of 0x1423 to the broken_dev_id[] array, which is used by a quirks logic meant to fix similar problems with other AMD chipsets. Signed-off-by: Daniel Lee Kruse <daniel.lee.kruse@protonmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03media: rockchip: rkisp1: Constify static structsRikard Falkeborn
These 'ops' structs are never modified, so make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: i2c: imx219: Selection compliance fixesHans Verkuil
To comply with the intended usage of the V4L2 selection target when used to retrieve a sensor image properties, adjust the rectangles returned by the imx219 driver. The top/left crop coordinates of the TGT_CROP rectangle were set to (0, 0) instead of (8, 8) which is the offset from the larger physical pixel array rectangle. This was also a mismatch with the default values crop rectangle value, so this is corrected. Found with v4l2-compliance. While at it, add V4L2_SEL_TGT_CROP_BOUNDS support: CROP_DEFAULT and CROP_BOUNDS have the same size as the non-active pixels are not readable using the selection API. Found with v4l2-compliance. [reword commit message, use macros for pixel offsets] Fixes: e6d4ef7d58aa7 ("media: i2c: imx219: Implement get_selection") Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02media: dt-bindings: media: Use OF graph schemaRob Herring
Now that we have a graph schema, rework the media related schemas to use it. Mostly this is adding a reference to graph.yaml and dropping duplicate parts from schemas. Cc: Maxime Ripard <mripard@kernel.org> Cc: Jacopo Mondi <jacopo@jmondi.org> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-09-05 15:56:27 +0000