summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2010-10-21V4L/DVB: Support or LME2510(C) DM04/QQBOX USB DVB-S BOXESMalcolm Priestley
DM04/QQBOX DVB-S USB BOX with LME2510C+SHARP:BS2F7HZ7395 or LME2510+LGTDQT-P001F tuner. [mchehab@redhat.com: Fix merge conflicts/compilation and CodingStyle issues] Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: ix2505v: make scripts/checkpatch.pl happyMauro Carvalho Chehab
WARNING: please, no space before tabs + * ^IPOR = Power on Reset (VCC H=<2.2v L=>2.2v)$ WARNING: unnecessary whitespace before a quoted newline + deb_info("Frq=%d x=%d N=%d A=%d \n", frequency, x, N, A); WARNING: please, no space before tabs +^Ielse ^I^I/*frequency up to 2150000*/$ WARNING: unnecessary whitespace before a quoted newline + deb_info("Data 0=[%x%x%x%x] \n", data[0], data[1], data[2], data[3]); WARNING: unnecessary whitespace before a quoted newline + deb_info("Data 2=[%x%x] \n", data[2], data[3]); Cc: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: Support for Sharp IX2505V (marked B0017) DVB-S silicon tunerMalcolm Priestley
Tuner used in Sharp BS2F7VZ7395 dvbs module. When ix2505v tuner is attached to stv0288 form this module. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: drivers/media/dvb/siano: Remove double testJulia Lawall
The same expression is tested twice and the result is the same each time. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @expression@ expression E; @@ ( * E || ... || E | * E && ... && E ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: drivers/media/video/em28xx: Remove potential NULL dereferenceJulia Lawall
If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: af9015: add USB ID for Terratec Cinergy T Stick RC MKIIStefan Lippers-Hollmann
Adding the USB ID for my TerraTec Electronic GmbH Cinergy T RC MKII [0ccd:0097] and hooking it up into af9015, on top of your new NXP TDA18218 patches, makes it work for me. Just the shipped IR remote control doesn't seem to create keycode events yet (tested with different remote=%d parameters), are there any hints to add support for that? [ 2.250022] usb 1-10: new high speed USB device using ehci_hcd and address 5 [ 2.369287] usb 1-10: New USB device found, idVendor=0ccd, idProduct=0097 [ 2.369290] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.369293] usb 1-10: Product: USB2.0 DVB-T TV Stick [ 2.369294] usb 1-10: Manufacturer: NEWMI [ 2.369296] usb 1-10: SerialNumber: 010101010600001 [ 2.534023] usbcore: registered new interface driver hiddev [ 2.537235] input: NEWMI USB2.0 DVB-T TV Stick as /devices/pci0000:00/0000:00:02.1/usb1/1-10/1-10:1.1/input/input0 [ 2.537323] generic-usb 0003:0CCD:0097.0001: input,hidraw0: USB HID v1.01 Keyboard [NEWMI USB2.0 DVB-T TV Stick] on usb-0000:00:02.1-10/input1 [ 2.537349] usbcore: registered new interface driver usbhid [ 2.537351] usbhid: USB HID core driver [ 3.263177] generic-usb 0003:04D9:1603.0002: input,hidraw1: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:02.0-8.1/input0 [ 3.286946] generic-usb 0003:04D9:1603.0003: input,hidraw2: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:02.0-8.1/input1 [ 3.467136] generic-usb 0003:046D:C050.0004: input,hidraw3: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-8.2/input0 [ 3.660890] generic-usb 0003:10D5:000D.0005: input,hidraw4: USB HID v1.10 Keyboard [No brand SP02-A1] on usb-0000:00:02.0-8.3/input0 [ 5.567632] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in cold state, will try to load a firmware [ 5.693497] dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw' [ 5.773109] dvb-usb: found a 'TerraTec Cinergy T Stick RC' in warm state. [ 5.773168] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 5.774290] DVB: registering new adapter (TerraTec Cinergy T Stick RC) [ 6.007696] af9013: firmware version:5.1.0 [ 6.010843] DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)... [ 6.032697] tda18218: NXP TDA18218HN successfully identified. [ 6.034442] dvb-usb: TerraTec Cinergy T Stick RC successfully initialized and connected. [ 6.040612] usbcore: registered new interface driver dvb_usb_af9015 [mchehab@redhat.com: Fix merge conflict with another board addition] Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Acked-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: drivers/media: Make static data tables and strings constlawrence rust
Making static data const avoids allocation of additional r/w memory and reduces initialisation time. It also provides some additional opportunities for compiler optimisations. Signed-off-by: Lawrence Rust <lvr@softsystem.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: cx25821: fix gcc warning when compiled with allyesconfigMauro Carvalho Chehab
drivers/staging/cx25821/cx25821-alsa.c:632: warning: ‘cx25821_audio_pci_tbl’ defined but not used Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: cx88: Fix some gcc warningsMauro Carvalho Chehab
drivers/media/video/cx88/cx88-dsp.c: In function ‘detect_a2_a2m_eiaj’: drivers/media/video/cx88/cx88-dsp.c:158: warning: ‘carrier_freq’ may be used uninitialized in this function drivers/media/video/cx88/cx88-dsp.c:158: warning: ‘stereo_freq’ may be used uninitialized in this function drivers/media/video/cx88/cx88-dsp.c:158: warning: ‘dual_freq’ may be used uninitialized in this function Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: v4l: Add a v4l2_subdev host private data fieldLaurent Pinchart
The existing priv field stores subdev private data owned by the subdev driver. Host (bridge) drivers might need to store per-subdev host-specific data, such as a pointer to platform data. Add a v4l2_subdev host_priv field to store host-specific data, and rename the existing priv field to dev_priv. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: v4l: Use v4l2_get_subdevdata instead of accessing v4l2_subdev::privLaurent Pinchart
Replace direct access to the v4l2_subdev priv field with the inline v4l2_get_subdevdata method. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: tm6000: bugfix param stringStefan Ringel
Signed-off-by: Stefan Ringel <stefan.ringel@arcor.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: cx88: convert core->tvaudio into an enumlawrence rust
Using an enum and removing the default case from switch statements accessing the value enables the compiler to emit a warning (enabled with -Wall) when an audio mode is not handled. This highlights an omission in the function cx88_dsp_detect_stereo_sap() (in cx88-dsp.c) not handling WW_EIAJ and WW_M. Signed-off-by: Lawrence Rust <lawrence@softsystem.co.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: drivers/media/video: Use available error codesJulia Lawall
Error codes are stored in rc, but the return value is always 0. Return rc instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: drivers/media: Use available error codesJulia Lawall
In each case, error codes are stored in rc, but the return value is always 0. Return rc instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: drivers/media/video/zoran: Use available error codesJulia Lawall
Error codes are stored in res, but the return value is always 0. Return res instead. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ local idexpression x; constant C; @@ if (...) { ... x = -C ... when != x ( return <+...x...+>; | return NULL; | return; | * return ...; ) } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: drivers/media/video: Adjust confusing if indentationJulia Lawall
In cx23885/cx23885-video.c, cx88/cx88-video.c, davinci/vpif_capture.c, and davinci/vpif_display.c, group the aligned code into a single if branch. In saa7134/saa7134-video.c, outdent the code following the if. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable braces4@ position p1,p2; statement S1,S2; @@ ( if (...) { ... } | if (...) S1@p1 S2@p2 ) @script:python@ p1 << r.p1; p2 << r.p2; @@ if (p1[0].column == p2[0].column): cocci.print_main("branch",p1) cocci.print_secs("after",p2) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: V4L2: avoid name conflicts in macrosGuennadi Liakhovetski
"sd" and "err" are too common names to be used in macros for local variables. Prefix them with an underscore to avoid name clashing. [mchehab@redhat.com: whitespace cleanups] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Reviewed-by: Andy Walls <awalls@md.metrocast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: IR/streamzap: functional in-kernel decodingJarod Wilson
This patch makes in-kernel decoding with the stock Streamzap PC Remote work out of the box. There are quite a few things going on in this patch, all related to getting this working: 1) I had to enable reporting of a long space at the end of each signal, or I had weird buffering and keybounce issues. 2) The keymap has been reworked slightly to match actual decoded values, the first edition was missing the pre-data bits present in the lirc config file for this remote. 3) There's a whole new decoder included, specifically for the not-quite-RC5 15-bit protocol variant used by the Streamzap PC Remote. The decoder, while usable with other recievers (tested with an mceusb receiver), will only be loaded by the streamzap driver, as its likely not of use in almost all other situations. This can be revisited if/when all keytable loading (and disabling of unneeded protocol decoder engines) is moved to userspace, but for now, I think this makes the most sense. Note that I did try to enable handling the streamzap RC5-ish protocol in the current RC5 decoder, but there's no particularly easy way to tell if its 14-bit RC5 or 15-bit Streamzap until we see bit 14, and even then, in testing an attempted decoder merge, only 2/3 of the keys were properly recognized as being the 15-bit variant and decoded correctly, the rest were close enough to compliant with 14-bit that they were decoded as such (but they have overlap with one another, and thus we can't just shrug and use the 14-bit decoded values). Also of note in this patch is the removal of the streamzap driver's internal delay buffer. Per discussion w/Christoph, it shouldn't be needed by lirc any longer anyway, and it doesn't seem to make any difference to the in-kernel decoder engine. That being the case, I'm yanking it all out, as it greatly simplifies the driver code. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: Add documentation about the Ibmcam/Konica new gspca driver formatsMauro Carvalho Chehab
Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21gspca/konica: Fix compilation merge conflictMauro Carvalho Chehab
drivers/media/video/gspca/konica.c: In function ‘sd_start’: drivers/media/video/gspca/konica.c:322: error: implicit declaration of function ‘usb_buffer_alloc’ drivers/media/video/gspca/konica.c:325: warning: assignment makes pointer from integer without a cast make[3]: ** [drivers/media/video/gspca/konica.o] Erro 1 Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: gspca_xirlink_cit: adjust ibm netcam pro framerate for available ↵Hans de Goede
bandwidth gspca_xirlink_cit: adjust ibm netcam pro framerate for available bandwidth Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: gspca_konica: New gspca subdriver for konica chipset using camsHans de Goede
This new driver replaces the (known to not work / crash) usbvideo konicawc driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: gspca_*: correct typo in my email address in various subdriversHans de Goede
gspca_*: correct typo in my email address in various subdrivers Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: Mark usbvideo ibmcam driver as deprecatedHans de Goede
Mark usbvideo ibmcam driver as deprecated, it is replaced by the new gscpa xirlink_cit driver. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: gspca_xirlink_cit: support bandwidth changing for devices with 1 ↵Hans de Goede
alt setting Some xirlink_cit models have only 1 alt setting, but the actual used bandwidth can be programmed through a register use this to allow streaming while other isoc streams (for example sound) are active at the same time. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: gspca_xirlink_cit: Use alt setting -> fps formula for model 1 cams tooHans de Goede
gspca_xirlink_cit: Use alt setting -> fps formula for model 1 cams too Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: gspca_xirlink_cit: Add support for camera with a bcd version of 0.01Hans de Goede
Add support for camera with a bcd version of 0.01, I've dupped these Model0 cams. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: gspca_xirlink_cit: Add support for Model 1, 2 & 4 camerasHans de Goede
Note this is untested as I don't have hardware to test, but all initsequences were taken over 1 on 1 from the old ibmcam driver so things should work. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: gspca_xirlink_cit: New gspca subdriver replacing v4l1 usbvideo/ibmcam.cHans de Goede
The old usbvideo ibmcam driver needs to be replaced with a v4l2 driver preferably using the gspca webcam framework rather then the old usbvideo framework. This new gspca sub driver sets a first step in that direction. The ibmcam driver supports 4 different model webcams. This new driver (for now) only supports Model 3 cameras, as my test cam is a Model 3 cam, or so I thought. Upon reading: http://www.linux-usb.org/ibmcam/ I learned that the IBM Netcamera Pro I have even though having the same usb id and the same bcd version is different from the Model 3 cameras supported by the ibmcam driver. So this new gscpa subdriver supports Model 3 cameras (untested), and the IBM Netcamera Pro. Currently use with the IBM Netcamera Pro requires a module parameter. I hope to be able to autodetect which is which in the future. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: af9015: add missing TDA18218 Kconfig optionAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: af9015: add support for tda18218 silicon tunerAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: af9013: add support for tda18218 silicon tunerAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: NXP TDA18218 silicon tuner driverAntti Palosaari
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: v4l2-subdev: remove obsolete enum/try/s/g_fmtHans Verkuil
These have now all been replaced by enum/try/s/g_mbus_fmt. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: ov7670: remove obsolete enum/try/s_fmt opsHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: cafe_ccic: convert to the mediabus APIHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: ov7670: add enum/try/s_mbus_fmt supportHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: v4l: add RGB444 mediabus formatsHans Verkuil
These are needed for the ov7670 driver. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: cx25821: convert to the mediabus APIHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: go7007: convert to use the mediabus APIHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: tvp7002: remove obsolete enum/try/s/g_fmtHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: tvp514x: remove obsolete enum/try/s/g_fmtHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: vpfe_capture: convert to new mediabus APIHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: tvp7002: add support for enum/try/g/s_mbus_fmtHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: tvp514x: add support for enum/g/try/s_mbus_fmtHans Verkuil
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21V4L/DVB: v4l: add new YUV mediabus formatsHans Verkuil
Needed for tvp7002 and tvp514x drivers. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-20Linux 2.6.36Linus Torvalds
2010-10-20Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: MIPS: O32 compat/N32: Fix to use compat syscall wrappers for AIO syscalls. MAINTAINERS: Change list for ioc_serial to linux-serial. SERIAL: ioc3_serial: Return -ENOMEM on memory allocation failure MIPS: jz4740: Fix Kbuild Platform file. MIPS: Repair Kbuild make clean breakage.
2010-10-20virtio: console: Don't block entire guest if host doesn't read dataAmit Shah
If the host is slow in reading data or doesn't read data at all, blocking write calls not only blocked the program that called write() but the entire guest itself. To overcome this, let's not block till the host signals it has given back the virtio ring element we passed it. Instead, send the buffer to the host and return to userspace. This operation then becomes similar to how non-blocking writes work, so let's use the existing code for this path as well. This code change also ensures blocking write calls do get blocked if there's not enough room in the virtio ring as well as they don't return -EAGAIN to userspace. Signed-off-by: Amit Shah <amit.shah@redhat.com> Acked-by: Hans de Goede <hdegoede@redhat.com> CC: stable@kernel.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-13 00:53:50 +0000