| Age | Commit message (Collapse) | Author |
|---|
|
Separate the core DSS files and compat layer files in the Makefile for
clarity.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Move creation of the sysfs files for displays to the compat layer.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
dpi.c uses dss_mgr_check_timings() to verify video timings, but that
function is in the compat layer. Change dpi.c to use the dispc's check
instead.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
This patch adds a new function, dispc_ovl_check(), which can be used to
verify scaling configuration for an overlay. The function gets both the
overlay and overlay manager as parameters, so that the caller does not
need to configure the hardware before using this function.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
The whole dispc irq handling system we currently have is only needed for
compat layer, and thus can be moved from dispc.c to the compat layer.
This is quite straigtforward, but we need to add new dispc functions to
request and free the actual hardware irq: dispc_request_irq() and
dispc_free_irq().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
We have two functions to wait for a dispc interrupt:
int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
Of these, the former is not used at all, and can be removed. The latter
is only used by the compat layer, and can be moved to the compat layer
code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
dispc_mgr_enable_sync and dispc_mgr_disable_sync are only used with the
compat mode. Non-compat will use the simpler enable and disable
functions.
This patch moves the synchronous enable/disable code to the compat
layer. A new file is created, dispc-compat.c, which contains low level
dispc compat code (versus apply.c, which contains slightly higher level
compat code).
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Some of the output drivers need to handle FRAMEDONE interrupt from
DISPC. This creates a direct dependency to dispc code, and we need to
avoid this to make the compat code to work.
Instead of the output drivers registering for dispc interrupts, we
create new mgr-ops that are used to register a framedone handler. The
code implementing the mgr-ops is responsible for calling the handler
when DISPC FRAMEDONE interrupt happens. The compat layer is improved
accordingly to do the call to the framedone handler.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
The output drivers need some operations from the overlay managers, like
enable and set_timings. These will affect the dispc registers, and need
to be synchronized with the composition-side changes with overlays and
overlay managers.
We want to handle these calls in the apply.c in the compatibility mode,
but when in non-compat mode, the calls need to be handled by some other
component (e.g. omapdrm).
To make this possible, this patch creates a set of function pointers in
a dss_mgr_ops struct, that is used to redirect the calls into the
correct destination.
The non-compat users can install their mgr ops with
dss_install_mgr_ops() function.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Most of the functions that are assigned to the fields in ovl struct are
in apply.c. By moving the function pointer setup into apply.c we can
make these functions static.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Most of the functions that are assigned to the fields in ovl-mgr struct
are in apply.c. By moving the function pointer setup into apply.c we can
make these functions static.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Overlay and overlay_manager structs will only be needed in the compat
mode.
This patch moves initialization of overlay and overlay_manager structs
to apply.c, so that they are handled in omapdss_compat_init().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Add two new exported functions, omapdss_compat_init and
omapdss_compat_uninit, which are to be used by omapfb, omap_vout to
enable compatibility mode for omapdss. The functions are called by
omapdss internally for now, and moved to other drivers later.
The compatibility mode is implemented fully in the following patches.
For now, enabling compat mode only sets up the private data in apply.c.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Commit 5d89bcc341771d95e3a2996218e5949a6627f59e (OMAPDSS: remove initial
display code from omapdss) moved setting up the initial overlay, overlay
manager, output and display connections from omapdss to omapfb.
However, currently omapfb only handles the connection related to the
default display, which means that no overlay managers are connected to
other displays.
This patch changes omapfb to go through all dssdevs, and connect an
overlay manager to them.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
We currently attach an output to a dssdev in the initialization code for
dssdevices in display.c. This works, but doesn't quite make sense: an
output entity represents (surprisingly) an output of DSS, which is
managed by an output driver. The output driver also handles adding new
dssdev's for that particular output.
It makes more sense to make the output-dssdev connection in the output
driver. This is also in line with common display framework.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
omapfb gives a WARN_ONCE if a predefined physical address is given for
allocating the framebuffer memory, as this is not currently supported.
However, the same warning happens if omapfb fails to allocate memory
during runtime, as when the allocation has failed, omapfb tries to
re-allocate the old memory with the physical address of the old memory
area.
Remove the warning from omapfb_alloc_fbmem, as it serves no purpose on
the failure case above, and move it to omapfb_parse_vram_param, so that
we only warn if physical address is given via omapfb module parameters.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Kernel lock verification code has lately detected possible circular
locking in omapfb. The exact problem is unclear, but omapfb's current
locking seems to be overly complex.
This patch simplifies the locking in the following ways:
- Remove explicit omapfb mem region locking. I couldn't figure out the
need for this, as long as we take care to take omapfb lock.
- Get omapfb lock always, even if the operation is possibly only related
to one fb_info. Better safe than sorry, and normally there's only one
user for the fb so this shouldn't matter.
- Make sure fb_info lock is taken first, then omapfb lock.
With this patch the warnings about possible circular locking does not
happen anymore.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
|
|
Currently omapfb_realloc_fbmem() calls dssdev->sync to ensure any
possible frame update is finished. This patch moves the call to
dssdev->sync from omapfb_realloc_fbmem to the callers of
omapfb_realloc_fbmem.
This keeps dssdev related calls out from omapfb_realloc_fbmem, which
makes sense as the function should only deal with fb memory. Also, this
seems to avoid a lockdep warning about possible circular locking.
However, the exact reason for that warning is still unclear.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
omapfb contains an exported omapfb_update_window function, which, at
some point in history, was used by a closed source SGX driver. This was
a hack even then, and should not be needed anymore. So remove it.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
The i2c_device_id table is supposed to be zero-terminated.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Remove including plat/dma.h which is not needed.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
cpu_is_* class functions create a dependency to OMAP platform code.
omapdss driver, which omap_vout uses, exposes a function to get the
version of the DSS hardware.
To remove the dependency to OMAP platform code this patch changes
omap_vout to use the omapdss version. For most of the checks, the ones
dealing with DSS differences, this is actually more correct than using
cpu_is_* functions. For the check whether VRFB is available or not this
is not really correct, but still works fine.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
When enabling a hwmod, omap_hwmod refers to the register mentioned in the
hwmod struct's member 'prcm.omap4.context_offs' to see whether context was
lost or not. It increments the context lost count for the hwmod and then clears
the register.
All the DSS hwmods have the same register(RM_DSS_DSS_CONTEXT) as context_offs.
When DSS is enabled, the first hwmod to be enabled is the "dss_core" hwmod since
it's corresponding platform device is the parent platform device("omapdss_dss").
The dss_core hwmod updates it's context lost count correctly and clears the
register. When the hwmods corresponding to the children platform devices are
enabled, they see that the register is clear, and don't increment their context
lost count. Therefore, all the children platform devices never report a loss in
context.
The DISPC driver currently gets the context lost count for DSS power domain from
it's corresponding platform device instance("omapdss_dispc"). The DISPC platform
device is one of the child devices, and it's corresponding hwmod("dss_dispc")
doesn't report the context lost count correctly.
Modify dss_get_ctx_loss_count() such that it always takes the "omapdss_dss"
platform device as it's input, move the function to dss.c so that it has access
to that platform device.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Add dss_get_core_pdev() which returns the platform device for dss core
device. The following patches use the core pdev to register sysfs files
in the compat code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Move display sysfs related code from display.c to display-sysfs.c, for
clarity. The sysfs code will only be used for compat mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.
This patch changes dispc_ovl_calc_scaling to get pclk and lclk as
parameters.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.
This patch changes calc_scaling to get pclk and lclk as parameters.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.
This patch changes check_horiz_timing_omap3() to get pclk and lclk as
parameters.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
In order to make the scaling calculations independent of the current
hardware configuration (e.g. which manager is connected to this output),
we need to change the calc funcs to get all the variables needed for the
calculations via parameters.
This patch changes calc_core_clk() function to get pclk as a parameter.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Change the dispc_plane_pclk_rate and dispc_plane_lclk_rate functions to
return 0 if the given plane is the writeback plane. The clocks are not
valid for WB, but returning 0 from these functions instead of running
into BUG() will simplify the code that uses these functions.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
dispc_mgr_go() should never be called with manager output disabled or if
the GO bit is already set. Change the current silent returns to
WARN_ONs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Instead of doing direct register reads/writes, dispc_wb_enable() and
dispc_wb_is_enabled() functions can use the common overlay functions to
set and check the enable bit.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
WB will not be used with compat-mode, i.e. from omapfb. This means we
don't need the current complex dispc_wb_enable function, but can have a
simple register write version of the function.
This patch removes all the extra code from dispc_wb_enable()
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
dispc_mgr_disable_digit_out() needs to wait until the DIGIT output is
turned off. This is done with either VSYNC irq on OMAP2/3 and
FRAMEDONETV on OMAP4+. It currently uses a rather hacky way to decide
what irq to use.
This patch changes dispc_mgr_disable_digit_out to use
dispc_mgr_get_framedone_irq to find out if there's framedone irq on this
SoC, and if not, uses VSYNC.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
OMAP2/3 do not have FRAMEDONETV irq, but later omaps do. We currently
always return 0 from dispc_mgr_get_framedone_irq() for TV output to be
compatible with OMAP2/3.
This patch implements "no_framedone_tv" dispc-feature that is used in
dispc_mgr_get_framedone_irq to return either 0 for OMAP2/3, or the
correct IRQ number for FRAMEDONETV on OMAP4+.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
dsi_get_dsidev_from_id() gives a WARN if DSI support is not compiled in.
This warning is not right, as it's valid to call
dsi_get_dsidev_from_id() to see if there is DSI support or not.
Remove the WARN().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
If the DSI support has not been compiled in or the SoC doesn't have DSI
hardware, dpi_get_dsidev() returns NULL. This NULL is passed to
dpi_verify_dsi_pll() causing a crash. The bug was added with commit
0e8276ef75f5c7811b038d1d23b2b42c16efc5ac (OMAPDSS: DPI: always use DSI
PLL if available).
Fix this by checking if dsidev is NULL before calling
dpi_verify_dsi_pll().
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Remove dispc_mgr_is_channel_enabled() and dss_mgr_get_timings()
declarations, as the function doesn't exist.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
omapdss fixes for 3.7-rc
Conflicts:
drivers/video/omap2/dss/dss.c
|
|
omapfb compilation fails on x86 (but not on omap):
drivers/video/omap2/omapfb/omapfb-ioctl.c: In function ‘omapfb_ioctl’:
drivers/video/omap2/omapfb/omapfb-ioctl.c:861:23: error: ‘SZ_1M’ undeclared (first use in this function)
drivers/video/omap2/omapfb/omapfb-ioctl.c:861:23: note: each undeclared identifier is reported only once for each function it appears in
Fix this by including linux/sizes.h.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Do not fail if dpll4_m4_ck is missing. The clock is not there on omap24xx,
so this should not be a hard error.
The patch retains the functionality before the commit 185bae10 (OMAPDSS:
DSS: Cleanup cpu_is_xxxx checks).
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Register the DSS driver after SPI probe. This simplifies the
initialization. This is similar to what is being done e.g.
in panel-acx565akm.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Add a dispc_features struct for OMAP5. Previously, OMAP5 used the same
struct as OMAP4. The new struct for OMAP5 contains the updated register
field offset and maximum limit for overlay manager width and height.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
The overlay manager width and height vary in OMAP5 from previous OMAPs
in terms of maximum limit and register field positions. Add parameters
in dispc_features for these. Also remove params related to manager width
and height from dss_features, as we want to maintain a feature list for
individual IPs.
Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Variable r is never set to any value different to zero.
Delete the if statement as it will never executed.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Commit 952cbaaa9b8beacc425f9aedf370468cbb737a2c (OMAPFB: Change
dssdev->manager references) added checks for OMAPFB_WAITFORVSYNC ioctl
to verify that the display, output and overlay manager exist. However,
the code erroneously uses && for each part, which means that
OMAPFB_WAITFORVSYNC may crash the kernel if no display, output or
manager is associated with the framebuffer.
This patch fixes the issue by using ||.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
Conflicts:
drivers/video/omap2/dss/Kconfig
drivers/video/omap2/omapfb/omapfb-ioctl.c
drivers/video/omap2/omapfb/omapfb-main.c
Merge changes to make omapfb use common dma_alloc, and remove omap's
custom vram allocator.
|
|
Merge Linux 3.7-rc4 to get fixes for CMA.
|
|
This reverts commit 14840b9a83c6a56629db2ba0ec247503e975f143.
The commit breaks audio, and a new version will be applied later.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
|
OMAP specific vram allocator is no longer in use, and we can remove all
the vram code.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
|
